If you are using digital mode (DIGU, DIGL), all control for the dsp
level control stuff is bypassed. The power button on the front panel
should still work but there is no absolutely no scaling whatsoever done
inside the dsp. It is up to you the user to get your settings correct
from the
If you are using digital mode (DIGU, DIGL), all control for the dsp
level control stuff is bypassed. The power button on the front panel
should still work but there is no absolutely no scaling whatsoever done
inside the dsp. It is up to you the user to get your settings correct
from the
I am goingto
follow along with the FPGA project. I have ordered the board and now I need to
get up to date with all the stuff I will need for this project. I guess I need
to know what resources I need. Such as:
What software
isrequired (is there a preferred flavor?)
What hardware would
be
I have noticed that there is a loud pop heard in the speakers every time
I change bands or use the band stack registers to go to another portion
of the same band. It only does it when the relays kick in.
On 160, 80, 60, 30, 17,12 6 meters the initial band change results in
a relay clack and a
Error occurred with version: 1.4.5p7
During the testing of the popping noise during frequency changes using
the band stack register (BSR) feature on 20 meter, I experienced a blue
screen of death: IRQ_NOT_LESS_OR EQUAL
Hex code:
0x000a (0x0028 0x0002 0x0001 0x80a5702a)
I have
5 matches
Mail list logo
