Dick,
Not all SVN updates involve new code or new code in the SVN trunk. To make
sure you are using the version you think you are (should), check the SVN log to
make sure the update is not a doc check-in or code someone else updated in
their own SVN branch. You can also check the time and
A new version of the FLEX-5000C Quick Start Guide (QSG) has been uploaded to
the FlexRadio web site. There are many new additions in this updated QSG which
describes in detail how to initialize the integrated computer. You can
download it directly from the FlexRadio Downloads page or use the
Rick,
Welcome to the club!
What are your audio, hardware and DSP buffer settings and what sampling rate
are you using?
All of these effect latency.
I run @ 96 KHZ sampling rate, RXdsp=4098, TX dsp=2048, Audio buffer=1024 and
hardware (Firewire) buffer = 1024 (the last two should be the same
Back in the last century, the 10 MB (that is right, MB not GB) IBM fixed
disks that can with a high-end IBM PC XT (oh, those were the days, a 4.77 MHz
16-bit processor and 512K of slw RAM) would have their bearings seize
with no warning. Obviously, no spin = no bits. I had gained a
You can use the EEPROM Reader tool to see if you can read the EEPROM info from
the radio too.
http://support.flex-radio.com/Downloads.aspx?id=187
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wachsmann
Sent: Friday, December 21, 2007 10:38
Queued disk reads too. The disks are faster than the Ethernet controller.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Friday, December 21, 2007 7:52 PM
To: FlexRadio List
Subject: [Flexradio] wow does my backup cause DPC's
Rob,
Have you tried the alternate TX image rejections procedure found in the KB?
http://kb.flex-radio.com/article.aspx?id=10383
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, December 21, 2007 10:40 PM
To: [EMAIL
Alan,
You have done nothing wrong.
You will not always get the Found new hardware message. Particularly if the
device driver is already registered with Windows.
The FLEX-5000 hardware is registered as a sound device under Windows. Windows
wouldn't know a radio if it jumped up and slapped
Or activated correctly. Once the pair is defined and the configuration saved,
the driver must be updated.
- Tim
W4TME
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Lee A Crocker [EMAIL
PROTECTED]
Sent: Sunday, December 23, 2007 9:55 PM
To:
For all you SVN junkies, there is a new crack pipe (SVN client) available.
Version 1.4.6.11647
http://tortoisesvn.net/downloads
- Tim
W4TME
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
This is a non-winnable classic Ford / Chevy debate. You can make equally valid
points for each OS depending on your perspective, experience, needs, wants,
comfort factor and business concerns. Both are tools. You shouldn't drive
nails with a hoe. The problem with most operating systems is
Alan,
1000uS DPCs is getting very close to the level where dropouts can begin to
occur, but not beyond the 1500uS threshold that seems to be where all of the
real problems start. I suspect that the problem you are experiencing is due to
the motherboard embedded Firewire controller and how your
Peter wrote:
So, in nice, clear, simple to understand terms what I hear you guys saying is:
The new stuff is going to be a Linux-only solution, but that with
virtualization we'll be able to run Windows apps on that same Linux box.
Not exactly, but very close. If you had written:
So, in
Doug,
It helps immensely if we know what radio you are using.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug McCann
Sent: Wednesday, December 26, 2007 3:52 PM
To: Flex Radio Posting
Subject: [Flexradio] Low Power Output
Since I installed
If you want to get an idea of what this is going to look like, here is Frank's
presentation The FSM Virtual Radio Kernel available for download from the
FlexRadio web site. http://support.flex-radio.com/Downloads.aspx?id=186
Hint for searching the Downloads page. If you leave the Related
I am not sure how up to date this is but there is a YouTube videos of the java
console in action running on a Mac
http://www.youtube.com/watch?v=f_ieCAVG_AQfeature=related
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Brickle
Sent:
Did you try creating a new database?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of hartfuss
Sent: Saturday, December 29, 2007 3:10 AM
To: Eric Wachsmann
Cc: 'Flex Reflector'
Subject: [Flexradio] SVN 1869, sideband
Hi,
just downloaded SVN 1869
Here are a few...
http://swik.net/Ubuntu+virtualization
http://ubuntuforums.org/forumdisplay.php?f=308
https://help.ubuntu.com/community/SeamlessVirtualization
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charles Greene
Sent: Saturday,
To all,
In response to the interest expressed here on the reflector this week regarding
the next generation of SDR software, known currently as the new architecture,
FlexRadio Systems (FRS) has added several new questions and answer in the FAQ
located on the web site under the Products menu.
All you have to do is go to the Downloads page on the FlexRadio web site and
search for shuttle
http://support.flex-radio.com/Downloads.aspx?id=122
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of michael
Sent: Saturday, December 29, 2007 8:59 PM
It is in the process of being improved and it is not done yet.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Sowden
Sent: Tuesday, January 01, 2008 3:00 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Noise reduction SDR1000
What has
The band plan is in the BandText table. It does not designate whether or not
the mode is CWu or CWl, just CW. That is an operators choice (aka FLEXibility)
to decide what mode to use.
How you set a particular mode on a per band basis (and the initial default
settings) are saved in the
I did several things to abate the fan noise. By far, opening the intake by
cutting out the hole (mentioned before) reduced the back pressure and make the
biggest improvement.
I also installed a thermostatically controlled fan controlled where the temp
sensor was on the PA transistors. This
Place several ferrite split cores on both ends of the USB cable. It has been
know to be susceptible to RFI.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of KQ8RP
Sent: Saturday, January 05, 2008 8:38 AM
To: FlexRadio
Subject: [Flexradio] USB
LET THE GAMES BEGIN!
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Saturday, January 05, 2008 2:10 PM
To: Flex Radio
Subject: [Flexradio] SOLAR CYCLE 24 BEGINS!
http://spaceweather.com/
SOLAR CYCLE 24 BEGINS:
Solar
No, it is not a requirement to create a new DB for every SVN that contains a
PowerSDR change. See the KB article about when a new DB should be considered.
http://kb.flex-radio.com/article.aspx?id=10394
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Are you using an SVN version or 1.10.3?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Blaschke
Sent: Tuesday, January 08, 2008 6:14 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] SDR-5000 VOX control
I use a Heil microphone with
I am using the Bose Companion2 speakers and I get a little RFI when I run my
IC-910h (VHF/UHF) at 100 watts but experience no problems on HF.
My only complaint about them is that they are the only 12 VAC devices in the
shack, so I have to use the supplied wall wart. I would have preferred
$3000?? Are you buying a Cray? :-)
You can get a very respectable Intel(r) Core(tm)2 Q6600 Quad-Core system sans
monitor from Dell for under $900.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayne Roth
Sent: Wednesday, January 09, 2008 5:18
The first 6 months of the 2008 hamfest schedule where FlexRadio Systems will
have a booth has been published on the web site.
For more information, go to http://www.flex-radio.com/ and look for the
Upcoming Events section.
If there is a hamfest near you, we would love for you to come by for an
You are not doing anything wrong. Not all SVN updates are committed to the
PowerSDR branch (where the code is). If I update a document and check it in to
SVN, the SVN number increments, but it does not change the SVN number shown in
the PowerSDR executable since it was not modified.
-Tim
Here is the link to TortoiseSVN documentation
http://tortoisesvn.net/support
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of dick kalt
Sent: Wednesday, January 16, 2008 7:25 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Tortoise Cleanup
Just flip the headphones around on your head and the test will pass :-)
All kidding aside, if memory serves me correctly, the headphone jack is
connected directly to the TRX board, so I don't see how it could be wired in
reverse. But you never know
-Tim
-Original Message-
From:
Ray,
I have powered speakers plugged directly into the Pwr Spkr Line Out jack on
the rear panel of the Flex-5000A and I hear a pure tone in the correct
speakers. The left tone is a little higher in pitch than the right. I also
observe the same behavior listening with my headphones. I am
To all,
There are two new articles which have recently been added to the Knowledge Base
that you might find of interest.
1.) Q10463 - HOWTO: How to Download the K6JCA PowerSDR 1.x Console
http://kb.flex-radio.com/article.aspx?id=10463
2.) Q10464 - INFO: Trunks, Branches and Tags - Oh My!
Because the reflector does not allow HTML, here is the e-mail address to send
signal reports mentioned at the bottom of the article but not shown.
[EMAIL PROTECTED]
BTW, this would make a great I/Q recording for download from the web page
(hint, hint)
-Tim
-Original Message-
From:
Mark,
I have a few questions so I have a better idea what might be going on.
What digital mode program are you using?
How is the software setup to key the radio?
What is the VAC version you are using?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
?
-Tim
-Original Message-
From: Van de Velde Eddy [mailto:[EMAIL PROTECTED]
Sent: Sunday, January 20, 2008 6:39 AM
To: Tim Ellison; NU8Z; flexradio@flex-radio.biz
Subject: Re: [Flexradio] VAC Latency (on rtty)
Gentlemen,
Indeed, this problem was on the reflector before. But, as far as I
Is the FA66 the default sound card and are your sounds associated with it?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edwin Marzan
Sent: Wednesday, January 23, 2008 11:12 AM
To: flexRadio@flex-radio.biz
Subject: [Flexradio] Windows Sounds
That is exactly the way the SDR-1000 and FLEX-5000 work today. See Gerald's
email from yesterday afternoon explaining how changing the preamp setting does
not change signal strength, it lowers the noise floor.
Gerald's quote:
2) The FlexRadio products measure the signal strength at the antenna
Refer to this KB article
http://kb.flex-radio.com/article.aspx?id=10403
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Saturday, January 26, 2008 11:38 AM
To: FlexRadio List
Subject: [Flexradio] PWSDR users question
I live in an
Boy, ya can't keep the cat in the bag for long around here :-)
There is an announcement of the release of PowerSDR v1.10.4 on the Forums.
http://forums.flex-radio.com/Topic416-39-1.aspx
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve
Me 2. I'm working the BARTG RTTY contest and VAC is ZIPPY FAST on T/R
transitions. No audio drops either.
Although I am getting a bit annoyed at stations that don't have good ears. The
SDR Paradox. I can here them and they can't hear me :-)
-Tim
-Original Message-
From: [EMAIL
What version of PowerSDR are you using?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Burch Akin
Sent: Sunday, January 27, 2008 7:49 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] SDR-1000 and digital modes
I have been trying to get my
This problem has been resolved. Please try again.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian Wade
Sent: Sunday, January 27, 2008 3:08 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Bug reporting attempt crashed bug reporting system
Ug. Browser incompatibilities!
We try to test the web site's functionality with IE, FireFox and Opera, but
unfortunately there isn't enough resources (time) to regression test after
every new browser update.
A note to all. If you do find a problem with the web site, KB or Forums,
Subject: Re: [Flexradio] Bug reporting attempt crashed bug reporting system
.
From: Tim Ellison [EMAIL PROTECTED]
Date: Sun, 27 Jan 2008 Time: 10:39:58
This problem has been resolved. Please try again.
Er, no. I tried again just now, and got the same error message, on
http://support.flex
What version of the software are you using? If it is not v1.10.4, you should
upgrade and see if the problem exist with the released version.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Harley
Sent: Monday, January 28, 2008 2:47 PM
To those having this issue. If you toggle PowerSDR from on to off to on does
this clear it up and bring the receiver back?
-Tim
-Original Message-
From: Jeff Anderson [mailto:[EMAIL PROTECTED]
Sent: Monday, January 28, 2008 3:17 PM
To: Tim Ellison; Jerry Harley; FlexRadio
Subject
Ross,
Please review the PowerSDR Compatibility Statement
http://www.flex-radio.com/Support.aspx?topic=PowerSDR_Compatibility
PowerSDR is not fully supported on Win2K. But doesn't mean you can't get it to
work.
BTW, The FLEX-5000 Firewire driver is recognized by Windows XP as a soundcard
Sherman,
The Reflector is not the place to inquire about an order status. Use [EMAIL
PROTECTED] for that purpose.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Tuesday, January 29, 2008 1:09 PM
To: FLEX RADIO
Subject:
Tom,
I believe that the TrueSpace type stereo signaling processing is a proprietary
technology of Bose. I have found zero info about it is done, which I suspect is
deliberate on the part of Bose. I use the Companion2 speakers. There is no way
to turn this effect off.
I like the way they
Thanks. That is good info to know. It will help with testing.
-Tim
-Original Message-
From: Dave Beumer WA3FDB [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 29, 2008 8:30 PM
To: Tim Ellison; 'Jeff Anderson'; 'Jerry Harley'; 'FlexRadio'
Subject: RE: [Flexradio] Flex 5000
Tim
-
From: Jerry Flanders [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 29, 2008 11:22 PM
To: Tim Ellison
Cc: FlexRadio@flex-radio.biz
Subject: RE: [Flexradio] Speaker choices - Bose Companion 2, and Flex
I didn't look - but all the info is almost certainly there if Bose patented it.
Look on one
I can not reproduce the problems you have described. Can you provide more
detail on the error message?
Also, have you updated DirectX 9.0c lately?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian Wade
Sent: Wednesday, January 30, 2008 3:45
Is this mode independent? Does it happen on CW as well as phone modes?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeff Anderson
Sent: Wednesday, January 30, 2008 2:57 PM
To: hartfuss
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio]
Firmware version 0.1.1.9 for the FLEX-5000 family of transceivers has been
posted on the web site.
This firmware update resolves a problem with selecting RX1 IN antenna connector.
You can download this update from the FlexRadio web site home page and
Downloads section, or you can use this
There are several new Knowledge Base articles that have been posted recently
you might find interesting.
Q10473 - HOWTO: How to Determine the Version of DirectX Installed on your PC
http://kb.flex-radio.com/article.aspx?id=10473
Q10472 - HOWTO: How to Adjust the Monitor Volume in PowerSDR 1.x
Since there are several new FlexRadio users that have recently joined the
Reflector, I want to provide everyone some helpful information regarding
finding information like where the keyboard mapping file is located and other
information related to FlexRadio Systems products.
FlexRadio has an
Bad memory?
Run MEMTEST32 for several hours to see if you have a flakey RAM stick.
http://www.memtest86.com/
Make a bootable CD and run it from there.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Naruta
Sent: Monday, February 04,
Whoops. It is MEMTEST86 not MEMTEST32
-Tim
-Original Message-
From: Tim Ellison
Sent: Monday, February 04, 2008 2:52 PM
To: '[EMAIL PROTECTED]'; 'FlexRadio'
Subject: RE: [Flexradio] PowerSDR won't start after Delta 44 upgrade
to5.10.00.5065
Bad memory?
Run MEMTEST32 for several
Did you load ASIO4ALL with your unsupported sound card?
http://support.flex-radio.com/Downloads.aspx?id=55
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian Wade
Sent: Monday, February 04, 2008 6:15 AM
To: flexradio@flex-radio.biz
Subject:
And you radio is?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Wednesday, February 06, 2008 10:23 AM
To: FlexRadio List
Subject: [Flexradio] wierd digital display is gone
This is SVN 1952.
I haven't been on digital for a
Sorry. Dropped an R
And your radio is?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Wednesday, February 06, 2008 12:25 PM
To: FireBrick; FlexRadio List
Subject: Re: [Flexradio] weird digital display is gone
And you
Did you post it on the Bug Tracker?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Nagle
Sent: Wednesday, February 06, 2008 12:24 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] sdr1000 tone test
Many besides myself have reported
if you cooling is not adequate) and
possibly damage them.
-Tim
-Original Message-
From: Mike Naruta [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 05, 2008 7:47 PM
To: Tim Ellison; FlexRadio
Subject: Re: [Flexradio] PowerSDR won't start after Delta 44 upgrade
to5.10.00.5065
Wow, thanks
First off, your assumption that the SDR-1000 configuration should be applicable
is correct. Bob's article is based on VAC 3.x and there is one I wrote based
on 4.x in the KB
http://kb.flex-radio.com/article.aspx?id=10218
Refer to that article and then check these things.
If you are having
I had to pay for the 3-4 transition.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe - AB1DO
Sent: Friday, February 08, 2008 5:50 PM
To: FlexRadio List
Subject: Re: [Flexradio] CW Skimmer
Well it's proven: CW Skimmer will not work with VAC
There have been some sparse reports of vCom not playing well with Vista.
VAC 4.x is supposedly Vista Ready
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Naruta
Sent: Friday, February 08, 2008 8:18 PM
To: [EMAIL PROTECTED];
No. The FLEX-5000 comes with it's own ASIO driver.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Saturday, February 09, 2008 12:23 PM
To: FlexRadio List
Subject: [Flexradio] still need ASIo drivers???
Now that I have the 5K, do
Two Questions:
Are you using a parallel or usb-to-parallel control cable?
Have you tried creating a new database?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Cleve
Sent: Sunday, February 10, 2008 10:41 AM
To: Flexradio
Subject:
Message-
From: Tim Ellison [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 10, 2008 11:20 AM
To: Robert Cleve; Flexradio
Subject: RE: [Flexradio] SDR-1000 receiver dead for about 30 seconds
whenPowerSDR Start button is clicked.
Two Questions:
Are you using a parallel or usb-to-parallel
Doug,
Can you provide a bit more detail?
1.) What versions of PowerSDR did you try?
2.) What virtual serial port software packages?
3.) What programs are you using to control PowerSDR?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug
This is a global question to all of the folks currently emulating Windows on a
Mac running PowerSDR with a SDR-1000 for my edification. Will the proprietary
USB-to-Parallel adapter and driver work successfully in this environment?
-Tim
-Original Message-
From: [EMAIL PROTECTED]
The breakout box eliminator (BOBE) does not necessarily use the 15-pin cable.
You can (and I recommend) you plug it directly into the D44 card and use well
shielded stereo audio cables (1/8 (3.5mm) TRS male plugs on both ends) for the
to line in and to line out connections between the SDR1K
Thanks, Dana. That is good to know.
-Tim
-Original Message-
From: Dana Rawding [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 12, 2008 2:16 PM
To: Tim Ellison
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Wanted - USB adapter cable , Fire wire cable Griffin
Knob , Tuner
The issue you experienced is documented in the FLEX-5000 Troubleshooting Guide.
The reason they are there is that the manual does not get updated as
frequently as the FLEX-5000 Troubleshooting Guide does.
The link to it is on the FlexRadio home page on the right hand side.
Don,
See my comments below.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don
Sent: Tuesday, February 12, 2008 8:47 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] several questions
I am using vac to interface with mixw, mmtty, and
-radio.com/article.aspx?id=10405
http://kb.flex-radio.com/article.aspx?id=10046
http://kb.flex-radio.com/article.aspx?id=10381
-Tim
-Original Message-
From: Don [mailto:[EMAIL PROTECTED]
Sent: Tuesday, February 12, 2008 11:59 PM
To: Tim Ellison
Cc: flexradio@flex-radio.biz
Subject: Re
I was working from home today (a case of Daytonaitis and a cold) and I tuned
into VP6DX on 20m working a wide split. He was only S5 on the loop with a lot
of QSB. I tailed ended a call and got him on the first try. An all time new
one! 5 minutes later the band faded and he was gone.
Me
Chris,
Code changes and fixes found in any SVN version are not available from the web
site until they are incorporated into an official released version of PowerSDR.
SVN update you are referencing, 1952 was done after 1.10.4 was released,
therefore will not be in any version available form
Yes. Shut down PowerSDR. Open the FLEX-5000 Firewire Control Panel.
Set the sampling rate for 48K with a 512K buffer. Set the Operation Mode to
Safe Mode Level 1
Open PowerSDR, but do not start it. Open Setup and set the audio for 48K
sampling rate and a 512K buffer.
Now start PowerSDR.
There has been an article published on the FLEX-5000 in the February edition of
CQ Magazine (the Spanish version) by Luis (EA3OG) titled
FLEX-5000: La radio del futuro ya está aquí. (FLEX-5000: The future of radio
is here)
FlexRadio has been given permission to reprint the article on the web
One thing that has not been brought up is the distinct possibility of one of
the controlling (able to change rig parameters) programs issues a CAT command
that could possibly screw something up (like your radio).
Here is just one simple example.
Program A (mixW in PSK31 mode), issues a command
You can add free form text to the program banner.
Open Setup.
Go to General-Options.
Add your custom title text.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Tuesday, February 19, 2008 3:20 PM
To: FlexRadio List
Subject:
What do you mean by changes? Please describe what you are actually doing to
observer this phenomenon. Transmit filters do not change unless you physically
vary the low and hit cut frequency points.
-Tim
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
There have been reports of WSJT4 working fine but more recent versions not
working correctly with PowerSDR.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David
Hilton-Jones
Sent: Sunday, February 24, 2008 12:37 PM
To: flexradio
Subject:
. Click YES and the
profile is saved.
-Tim
-Original Message-
From: Don Sachnoff [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 24, 2008 1:13 PM
To: flexradio@flex-radio.biz; [EMAIL PROTECTED]; Tim Ellison
Subject: Re: [Flexradio] [FlexRadio] Transmit profile
Tim
How are you asserting PTT? Serial bit banging or by CAT commands?
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of FireBrick
Sent: Sunday, February 24, 2008 5:44 PM
To: Al; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Some VAC Latency
Try the new database test. I can not get my system to show what yours is doing.
-Tim
-Original Message-
From: Don [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 24, 2008 6:03 PM
To: Tim Ellison
Cc: flexradio@flex-radio.biz; [EMAIL PROTECTED]
Subject: Re: [Flexradio] [FlexRadio
PROTECTED]
Sent: Sunday, February 24, 2008 11:29 PM
To: Tim Ellison
Cc: Don; flexradio@flex-radio.biz; [EMAIL PROTECTED]
Subject: Re: [Flexradio] [FlexRadio] Transmit profile
new database test where do I find information on this? I checked the KB
but didn't find anything there. Is this the how
From: Don Sachnoff [mailto:[EMAIL PROTECTED]
Sent: Monday, February 25, 2008 8:37 AM
To: Tim Ellison
Cc: flexradio@flex-radio.biz; [EMAIL PROTECTED]
Subject: Re: [Flexradio] [FlexRadio] Transmit profile
OK, I was on the right path.
Will this result in the loss of the rx
A new article has been published in the KB with the title Q10477 - HOWTO: Using
a SDR-1000 with PowerSDR with an Apple Mac Mini graciously provided by Don
W0RXX. You can access the article directly using the following URL.
http://kb.flex-radio.com/article.aspx?id=10477
I'd personally like to
I have been running PowerSDR VAC at 48K...
This is the preferred way to setup VAC. Refer to the following KB article,
step 6.
http://kb.flex-radio.com/article.aspx?id=10218
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Mumaw
Sent:
You can run full duty cycle digital modes at 100 watts if the transmissions are
intermittent, like operating a RTTY contest for hours on end.
If you are rag chewing on digital modes where the transmissions are long and
the breaks are short, then 50 watts is a good output power level unless good
I do not have any nor have I ever had of these problems with VAC.
I believe there is something else loaded on the machine. I think what you may
be seeing with VAC is a symptom of another issue that is manifesting itself in
the VAC process.
I am using firmware 0.1.1.10, VAC 4.08 and several of
Try this. Install a version 4.70 of WSJT and see what happens using 1.10.4.
-Tim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David
Hilton-Jones
Sent: Thursday, February 28, 2008 2:07 PM
To: flexradio
Subject: [Flexradio] SDR v1.10.4 and VAC
I
FYI.
This is in no way a bash on Bob. Experimentation and innovation are strongly
encouraged.
Be forewarned.
Copying the Options table is strongly discouraged. See KB article Q10381 -
INFO: PowerSDR 1.x Access Database Table Description.
http://kb.flex-radio.com/Article.aspx?id=10381
Did you read the articles on N1MM setup in the KB?
Search on N1MM
-Tim
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don
Sent: Friday, February 29, 2008 10:54 PM
To: flexradio@flex-radio.biz; [EMAIL PROTECTED]
Subject: [FlexRadio] Setting
To all Flexers:
Since Eric has provided the guidance for all us SVN users to fall back off the
wagon, it is a good time to also discuss how we should exchange information
regarding the new (and potentially incomplete) features in the alpha code. By
using SVN code, we are not only using the
1001 - 1100 of 4185 matches
Mail list logo
