Hi, Over the last few days I have been trying to fly the A320 between some airports, navigating along the way via ndb's, and using the autopilot. I seem to have a problem in that it will only allow me to set one lot of data for the autopilot. When I go back and change a height or speed setting Flightgear just hangs. For example: take off and climb a bit and get on to a rough heading. Select wing leveler, altitude hold, and speed hold with throttle. Once above 10'000 I want to increase the speed say another 100 knots. I type this in under the Autopilot menu, but when I press OK to activate the new speed and exit it just hangs. If I activate the new setting first this sometimes works, but sometimes just freezes as well.
Im using the precompiled 0.9.4 windows binaries under win 2000. A possible user request: could there be a user option for the Mach number setting for the autopilot? I have noticed that when climbing through around 10,000 ft that it begins to pitch and oscillate. I have noticed that this happens when trying to climb at high speeds and rates of climb, so I think that the performance Im trying to get is not possible and so the autopilot is struggling. Being able to climb at a constant mach number would be very useful. Tim _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel