RE: [t13] SATA expert need to explain this problem

2004-12-07 Thread sam ram
This message is from the T13 list server. Hi Hale, May be the cable that was connected to port A was slightly loose on the Host connector side. When you did the swapping of cables on the drive sides the second time some how the connection on the cable connected to port A was better. Hussam

[t13] Names on EDD-3 Standard

2004-12-07 Thread Daniel . Colegrove
This message is from the T13 list server. Dear T13 Reflector List Member: The EDD-3 Standard is about to be forwarded to INCITS for fist public review. I have the following names to be listed on the participants page. If you beleive you or someone else has been left off please let me know

[t13] ATAPI Overlap and Queuing

2004-12-07 Thread Curtis Stevens
Title: ATAPI Overlap and Queuing I would like to obsolete ATAPI overlap and Queuing from ATA8-ACS. I am just wondering if anybody would like to voice objections... Curtis E. Stevens 20511 Lake Forest Drive #C-214D Lake Forest, California

Re: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread Hale Landis
This message is from the T13 list server. Curtis Stevens wrote: I would like to obsolete ATAPI overlap and Queuing from ATA8-ACS. I am just wondering if anybody would like to voice objections... No objections from me. Has the old ATA O/Q stuff been deleted too? If not, it should also be deleted

RE: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread Eschmann, Michael K
Title: ATAPI Overlap and Queuing Hmmm. Seems to me that ATAPI only supported overlap and _not_ queuing. Where is queuing for ATAPI documented? Maybe having brain-farts, MKE. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark OverbySent: Tuesday, December 07, 2004 2:05

RE: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread Mark Overby
Title: ATAPI Overlap and Queuing It was pointed out to me that I was objecting to removing queueing for ATAPI. I do not. Only for ATA would I object. From: Mark Overby Sent: Tuesday, December 07, 2004 2:05 PMTo: 'Curtis Stevens'; [EMAIL PROTECTED]Subject: RE: [t13] ATAPI Overlap and

Re: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread James . C . Hatfield
This message is from the T13 list server. The ATAPI queueing method using DSC for 'immediate' commands is still used for ATAPI tape. I don't know about optical ATAPI. Thank You !!! - Jim Hatfield ATA Interface Firmware T13

RE: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread Mark Overby
This message is from the T13 list server. I can firmly state that there are at least two host controllers on the market that support command queuing for ATA devices in hardware. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hale Landis Sent: Tuesday,

RE: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread Tony Goodfellow
This message is from the T13 list server. I know of three! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Overby Sent: Tuesday, 07 December, 2004 15:42 To: Hale Landis; [EMAIL PROTECTED] Subject: RE: [t13] ATAPI Overlap and Queuing This message

RE: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread Hale Landis
This message is from the T13 list server. On Tue, 7 Dec 2004 15:42:21 -0800, Mark Overby wrote: This message is from the T13 list server. I can firmly state that there are at least two host controllers on the market that support command queuing for ATA devices in hardware. OK, then I would

RE: [t13] ATAPI Overlap and Queuing

2004-12-07 Thread Wolford, Jeff
This message is from the T13 list server. Remember folks: Obsolete and removed only means that no further work is going to be done on these commands. Not that they can no longer be used (i.e. CHS... Its obsolete, but all the desktop HDDs still support it -:) Jeff Jeff Wolford