I'm interested to know if there has been work on fpc for
FreeBSD/PowerPC. I'm interested in the status and helping maintain fpc
for this platform.
Regards,
Curtis
___
fpc-devel maillist - fpc-devel@lists.freepascal.org
http://lists.freepascal.org/
-- Original Message
Subject: Re: [fpc-devel] FPC for FreeBSD/PowerPC
From:"Karoly Balogh (Charlie/SGR)"
Date:Tue, August 8, 2017 12:32
To: "FPC developers' list"
Hi,
On Mon, 7 Aug 2017, Curtis Hamilton wrote
Hello,
I’d like to know if there is any interest in providing FPC for
FreeBSD/PowerPC, specifically 64-bit.
In case there is no interest, I’m looking for some assistance.
First, I’m not an experienced programmer, but I’ve attempted to port FPC,
using the guidance at
https://wiki.freepascal.org/P
Op 2020-10-18 om 23:03 schreef Jonas Maebe via fpc-devel:
//>>>/I’ve been able to create a cross compiler using the guidance and some />>>/additional information. But I’ve been unable to create the proper FPC />>>/startup code (prt0.as) needed. />>>//>>>/Any help would be appreciated. />>/I belie
Attached is the prt0.as I created using the one used for linux/powerpc64.
I've also attached the dump of crt1.s from the target.
Thanks!
On Wed, Oct 21, 2020 at 10:04 AM Jonas Maebe via fpc-devel <
fpc-devel@lists.freepascal.org> wrote:
> On 20/10/2020 02:32, Curtis Hamilton via f
Attached it the crt1.s created using gcc -S that was used in the prt0.as
in my earlier email.
-regards
On 10/21/20 10:51 AM, Curtis Hamilton wrote:
Attached is the prt0.as <http://prt0.as> I created using the one used
for linux/powerpc64. I've also attached the dump of crt1
Free Pascal (FPC) currently does not support FreeBSD running on PowerPC.
I need some help in getting FPC on FreeBSD/powerpc64. I’ve done preliminary
work to get the cross compiler working. However, I’m not well versed in
assembly programming and need help in creating the proper startup code
(prt0
Is there any interest in porting FPC to Freebsd/PowerPC64?
I'm looking for some help with port FPC to FreeBSD on PowerPC. Any
assistance would be appreciated.
Thanks in advance.
___
fpc-devel maillist - fpc-devel@lists.freepascal.org
https://lists.fr
struggling with the start up code, as I’m lost when it comes to coding in
assembly.
This may be a lost cause.
On Sun, Apr 18, 2021 at 6:54 AM Sven Barth
wrote:
> Am 18.04.2021 um 00:45 schrieb Curtis Hamilton via fpc-devel:
> > Is there any interest in porting FPC to Freebsd/
I’m going to give this another try. I'm looking for some help with porting
FPC to FreeBSD 13 on PowerPC64. Specifically, I’m looking for help with
the startup code.
I’m using a Raptor Blackbird Power9 system and will provide access if
needed.
Any assistance would be appreciated.
___
Thanks for the response.
I’ll set it up for you and provide you all the details.
Regards
On Mon, Nov 1, 2021 at 8:22 AM Jonas Maebe via fpc-devel <
fpc-devel@lists.freepascal.org> wrote:
> On 14/09/2021 06:38, Curtis Hamilton via fpc-devel wrote:
> > I’m going to give this a
On Mon, Nov 1, 2021 at 6:42 PM Curtis Hamilton wrote:
> Thanks for the response.
>
> I’ll set it up for you and provide you all the details.
>
> Regards
>
> On Mon, Nov 1, 2021 at 8:22 AM Jonas Maebe via fpc-devel <
> fpc-devel@lists.freepascal.org> wrote:
&g
12 matches
Mail list logo