Read-Write rules for table cell rotation
Hi Scott Thanks for your reply. After more research and reading, plus some trial and error, I came up with the same rule that you have below, and it works. FM knows what to do if you then give the @outputclass attribute a value of 270. I guess you can also use 90 or 180. I also tried it using a custom attribute called @rotated, with values of "yes" or "no". That works too, and it's not difficult to add the attribute to the DTD. At least, it's not difficult to do it the wrong way, by modifying the DITA DTD directly rather than using a customization layer. But since @outputclass works and we don't need it for anything else, I think I'll go with that. Thanks again, Roger On 04/02/2013 5:22 PM, Scott Prentice wrote: > Hi Roger... > > Interesting. I've not played with this to see how (or if) this can be > done through the rules file. Did you try this (without the value.. > line) .. > > element "entry" { > is fm table cell element; > attribute "outputclass" { > is fm property rotate; > } > } > > I'd think that if @outputclass was set to 0, 90, 180, or 270 .. this > might rotate the cell. I know this isn't really a workable solution, > but would be interesting to see if it works. I think the idea is that > you'd have an attribute called "rotation" (or whatever) that you'd set > to the desired value .. also not really feasible with DITA since you > can't really add attributes. > > DITA-FMx supports rotated cells by adding a data element to the entry > and stores the rotation value in there, then sets the cell rotation > when you open the file (via FDK coding). > > Do let me know if you get this working via the rules file. > > Cheers, > > ...scott > > Scott Prentice > Leximation, Inc. > www.leximation.com > +1.415.485.1892 > > On 2/4/13 8:20 AM, Roger Shuttleworth wrote: >> Hello All >> >> FM 11.0.1 structured, using DITA 1.2. >> >> I'm hoping some read-write rules guru will be able point me in the >> right direction... >> >> We have some tables in which occasional cell contents are rotated. To >> do this manually, we select the text and go to the Graphics menu. But >> since we are using DITA XML, I'd like to save the rotation property >> to the XML and have FM apply it again when the XML file is reopened. >> Clearly a job for read-write rules. >> >> So after a thorough study of the Structured Application Developer's >> Guide and the corresponding Reference, as well as the FM11 help, >> etc., I have attempted with the following: >> >> element "entry" { >> is fm table cell element; >> attribute "outputclass" { >> is fm property rotate; >> value "rotate" is fm value "270"; >> } >> } >> >> When I set @outputclass to "rotate" and save as XML, the attribute >> value is not written. If I edit the XML in a text editor and then >> open in FM, the @outputclass is set to "no value". So clearly nothing >> is happening using @outputclass and/or my rule. >> >> The Developer Reference gives tantalizing information such as >> "FrameMaker extends the possible values to allow rotations of 0, 90, >> 80, and 270 degrees." I've tried a whole lot of alternative rules and >> values, but nothing seems to do anything (except generate an error, >> that is). >> >> Do I need to use or define a different attribute than @outputclass? >> Or is there some other secret syntax that eludes me? Or does it just >> not work? >> >> Thanks for your help.. >> >> Roger Shuttleworth >> London, Canada >> ___ > -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130204/bf4088a0/attachment.html>
FM 10 list of pods becomes detached
Grab the pod and start moving it SLOWLY toward the edge of the "frame" for the FrameMaker application. When you see a faint blue line between it and the frame, stop. It's docked. Took me FOREVER to pick up that one, and it's hard because that line is very slender and if you move too fast you'll miss it. On Mon, Feb 4, 2013 at 3:32 PM, Nancy Allison wrote: > Hi, all. > > I'm using FM 10 on a Win 7 system. > > On the right side of my workspace, the list of pods has become detached. I > can physically move it outside the FM window altogether, which can be quite > helpful, but I'd like to reattach it now. > > It's persisted through opening and closing Frame and even rebooting the > computer. > > I can't figure out how to reattach it. There's got to be something on the > View menu or Preferences . . . what is it? Thanks! > ___ > > > You are currently subscribed to framers as ljsims.ML at gmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. -- Lin Sims
FM 10 list of pods becomes detached
An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130204/d4201774/attachment.html>
best web help add-on for FrameMaker 10?
We've encountered JavaScript bugs in Internet Explorer 8 that break the TOC and search in RoboHelp 9's WebHelp output. We could fix that by upgrading to TCS 4, but that would cost $800, so I might as well look at other options for generating web help from unstructured FM. I've got MIF2Go so I'm trying that, but encountering some issues with Firefox. I'll give WebWorks ePublisher a try. http://www.indoition.com/online-help-authoring-tools-survey.htm says it costs $795 a year, does the license actually expire? Last time I tried Flare, the FrameMaker import was quite good but it needed some cleanup so wasn't a replacement for RoboHelp. Anything else out there?
Re: FM 7 and CS6 Illustrator art
Richard,I use 7.2 and have no problem importing .ai files, as well as .eps into both Structured and Unstructured FM7.2 files. But, back to the original question, if Arlyn needs to edit the Illustrator CS6 files, and doesn't have the CS6 version, yes, the originator would have to save then source in a version that she has. > > From: "Combs, Richard" >To: "arlyn_...@ea.epson.com" ; >"framers@lists.frameusers.com" >Sent: Monday, February 4, 2013 4:51 PM >Subject: RE: FM 7 and CS6 Illustrator art > >arlyn_...@ea.epson.com wrote: > >> Does anyone know of any issues importing CS6 Illustrator art into FM 7? We're >> still using FM 7 (obviously) and one of our vendors is planning on upgrading >> to CS6. Will they need to back save to a previous version? I vaguely recall >> hearing about art import issues, but maybe that was with earlier versions of >> FM. Thanks! > >FM 7.x doesn't have an Adobe Illustrator filter and doesn't support import of >native *.ai files (I think that was added in FM 9). I recall reading somewhere >(probably this list) that it sometimes works if you use the EPS filter, but >it's not supported/recommended. Save the Illustrator images as EPS (with TIFF >preview) or PDF and import that. SVG might be another option, if AI supports >saving as that. Obviously, you wouldn't want to convert those lovely scalable >graphics into bitmaps. > >HTH! > >Richard G. Combs >Senior Technical Writer >Polycom, Inc. >richardDOTcombs AT polycomDOTcom >303-223-5111 >-- >rgcombs AT gmailDOTcom >303-903-6372 >-- > > > > > > >___ > > >You are currently subscribed to framers as dspre...@yahoo.com. > >Send list messages to framers@lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscr...@lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com > >Send administrative questions to listad...@frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. > > >___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 7 and CS6 Illustrator art
Richard,I use 7.2 and have no problem importing .ai files, as well as .eps into both Structured and Unstructured FM7.2 files. But, back to the original question, if Arlyn needs to edit the Illustrator CS6 files, and doesn't have the CS6 version, yes, the originator would have to save then source in a version that she has. > > From: "Combs, Richard" >To: "Arlyn_Lee at ea.epson.com" ; "framers at >lists.frameusers.com" >Sent: Monday, February 4, 2013 4:51 PM >Subject: RE: FM 7 and CS6 Illustrator art > >Arlyn_Lee at ea.epson.com wrote: > >> Does anyone know of any issues importing CS6 Illustrator art into FM 7? We're >> still using FM 7 (obviously) and one of our vendors is planning on upgrading >> to CS6. Will they need to back save to a previous version? I vaguely recall >> hearing about art import issues, but maybe that was with earlier versions of >> FM. Thanks! > >FM 7.x doesn't have an Adobe Illustrator filter and doesn't support import of >native *.ai files (I think that was added in FM 9). I recall reading somewhere >(probably this list) that it sometimes works if you use the EPS filter, but >it's not supported/recommended. Save the Illustrator images as EPS (with TIFF >preview) or PDF and import that. SVG might be another option, if AI supports >saving as that. Obviously, you wouldn't want to convert those lovely scalable >graphics into bitmaps. > >HTH! > >Richard G. Combs >Senior Technical Writer >Polycom, Inc. >richardDOTcombs AT polycomDOTcom >303-223-5111 >-- >rgcombs AT gmailDOTcom >303-903-6372 >-- > > > > > > >___ > > >You are currently subscribed to framers as dspreadb at yahoo.com. > >Send list messages to framers at lists.frameusers.com. > >To unsubscribe send a blank email to >framers-unsubscribe at lists.frameusers.com >or visit >http://lists.frameusers.com/mailman/options/framers/dspreadb%40yahoo.com > >Send administrative questions to listadmin at frameusers.com. Visit >http://www.frameusers.com/ for more resources and info. > > > -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130204/5ee165fa/attachment.html>
FM11 bug: white text on colored background disappears in CMYK PDF [SOLVED]
Hi group Problem solved! It was not an Fm11 bug, but just an incorrect setting in my color definitions. The color "White" was set to "Don't Print". I changed it to "Print as Process" and "Knock Out" and everything looks OK now. Thank you for your reply, Fred. It pointed me in the right direction. -- Yves Barbion www.scripto.nu -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130204/f802945e/attachment.html>
RE: FM 7 and CS6 Illustrator art
arlyn_...@ea.epson.com wrote: > Does anyone know of any issues importing CS6 Illustrator art into FM 7? We're > still using FM 7 (obviously) and one of our vendors is planning on upgrading > to CS6. Will they need to back save to a previous version? I vaguely recall > hearing about art import issues, but maybe that was with earlier versions of > FM. Thanks! FM 7.x doesn't have an Adobe Illustrator filter and doesn't support import of native *.ai files (I think that was added in FM 9). I recall reading somewhere (probably this list) that it sometimes works if you use the EPS filter, but it's not supported/recommended. Save the Illustrator images as EPS (with TIFF preview) or PDF and import that. SVG might be another option, if AI supports saving as that. Obviously, you wouldn't want to convert those lovely scalable graphics into bitmaps. HTH! Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-903-6372 -- ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 7 and CS6 Illustrator art
Arlyn_Lee at ea.epson.com wrote: > Does anyone know of any issues importing CS6 Illustrator art into FM 7? We're > still using FM 7 (obviously) and one of our vendors is planning on upgrading > to CS6. Will they need to back save to a previous version? I vaguely recall > hearing about art import issues, but maybe that was with earlier versions of > FM. Thanks! FM 7.x doesn't have an Adobe Illustrator filter and doesn't support import of native *.ai files (I think that was added in FM 9). I recall reading somewhere (probably this list) that it sometimes works if you use the EPS filter, but it's not supported/recommended. Save the Illustrator images as EPS (with TIFF preview) or PDF and import that. SVG might be another option, if AI supports saving as that. Obviously, you wouldn't want to convert those lovely scalable graphics into bitmaps. HTH! Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 -- rgcombs AT gmailDOTcom 303-903-6372 --
FM 10 list of pods becomes detached
Hi, all. I'm using FM 10 on a Win 7 system. On the right side of my workspace, the list of pods has become detached. I can physically move it outside the FM window altogether, which can be quite helpful, but I'd like to reattach it now. It's persisted through opening and closing Frame and even rebooting the computer. I can't figure out how to reattach it. There's got to be something on the View menu or Preferences . . . what is it? Thanks!
Re: Read-Write rules for table cell rotation
Hi Roger... Interesting. I've not played with this to see how (or if) this can be done through the rules file. Did you try this (without the value.. line) .. element "entry" { is fm table cell element; attribute "outputclass" { is fm property rotate; } } I'd think that if @outputclass was set to 0, 90, 180, or 270 .. this might rotate the cell. I know this isn't really a workable solution, but would be interesting to see if it works. I think the idea is that you'd have an attribute called "rotation" (or whatever) that you'd set to the desired value .. also not really feasible with DITA since you can't really add attributes. DITA-FMx supports rotated cells by adding a data element to the entry and stores the rotation value in there, then sets the cell rotation when you open the file (via FDK coding). Do let me know if you get this working via the rules file. Cheers, ...scott Scott Prentice Leximation, Inc. www.leximation.com +1.415.485.1892 On 2/4/13 8:20 AM, Roger Shuttleworth wrote: Hello All FM 11.0.1 structured, using DITA 1.2. I'm hoping some read-write rules guru will be able point me in the right direction... We have some tables in which occasional cell contents are rotated. To do this manually, we select the text and go to the Graphics menu. But since we are using DITA XML, I'd like to save the rotation property to the XML and have FM apply it again when the XML file is reopened. Clearly a job for read-write rules. So after a thorough study of the Structured Application Developer's Guide and the corresponding Reference, as well as the FM11 help, etc., I have attempted with the following: element "entry" { is fm table cell element; attribute "outputclass" { is fm property rotate; value "rotate" is fm value "270"; } } When I set @outputclass to "rotate" and save as XML, the attribute value is not written. If I edit the XML in a text editor and then open in FM, the @outputclass is set to "no value". So clearly nothing is happening using @outputclass and/or my rule. The Developer Reference gives tantalizing information such as "FrameMaker extends the possible values to allow rotations of 0, 90, 80, and 270 degrees." I've tried a whole lot of alternative rules and values, but nothing seems to do anything (except generate an error, that is). Do I need to use or define a different attribute than @outputclass? Or is there some other secret syntax that eludes me? Or does it just not work? Thanks for your help.. Roger Shuttleworth London, Canada ___ ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Read-Write rules for table cell rotation
Hi Roger... Interesting. I've not played with this to see how (or if) this can be done through the rules file. Did you try this (without the value.. line) .. element "entry" { is fm table cell element; attribute "outputclass" { is fm property rotate; } } I'd think that if @outputclass was set to 0, 90, 180, or 270 .. this might rotate the cell. I know this isn't really a workable solution, but would be interesting to see if it works. I think the idea is that you'd have an attribute called "rotation" (or whatever) that you'd set to the desired value .. also not really feasible with DITA since you can't really add attributes. DITA-FMx supports rotated cells by adding a data element to the entry and stores the rotation value in there, then sets the cell rotation when you open the file (via FDK coding). Do let me know if you get this working via the rules file. Cheers, ...scott Scott Prentice Leximation, Inc. www.leximation.com +1.415.485.1892 On 2/4/13 8:20 AM, Roger Shuttleworth wrote: > Hello All > > FM 11.0.1 structured, using DITA 1.2. > > I'm hoping some read-write rules guru will be able point me in the > right direction... > > We have some tables in which occasional cell contents are rotated. To > do this manually, we select the text and go to the Graphics menu. But > since we are using DITA XML, I'd like to save the rotation property to > the XML and have FM apply it again when the XML file is reopened. > Clearly a job for read-write rules. > > So after a thorough study of the Structured Application Developer's > Guide and the corresponding Reference, as well as the FM11 help, etc., > I have attempted with the following: > > element "entry" { > is fm table cell element; > attribute "outputclass" { > is fm property rotate; > value "rotate" is fm value "270"; > } > } > > When I set @outputclass to "rotate" and save as XML, the attribute > value is not written. If I edit the XML in a text editor and then open > in FM, the @outputclass is set to "no value". So clearly nothing is > happening using @outputclass and/or my rule. > > The Developer Reference gives tantalizing information such as > "FrameMaker extends the possible values to allow rotations of 0, 90, > 80, and 270 degrees." I've tried a whole lot of alternative rules and > values, but nothing seems to do anything (except generate an error, > that is). > > Do I need to use or define a different attribute than @outputclass? Or > is there some other secret syntax that eludes me? Or does it just not > work? > > Thanks for your help.. > > Roger Shuttleworth > London, Canada > ___ -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130204/cfe985bc/attachment.html>
enlarge equation box in FM10
Is there a way to enlarge the equation box? Saylor Solutions, Inc. William W. Saylor, PE(v) 719 481-0433 20075 Promontory Way (mob) 719 373-3770 Monument, CO 80132 wsaylor at earthlink.net -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130204/cbc6c377/attachment.html>
Re: Re: FM 10 list of pods becomes detached
Thanks, Lin. I will remember this! --Nancy ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
enlarge equation box in FM10
Is there a way to enlarge the equation box? Saylor Solutions, Inc. William W. Saylor, PE(v) 719 481-0433 20075 Promontory Way (mob) 719 373-3770 Monument, CO 80132 wsay...@earthlink.net ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 7 and CS6 Illustrator art
Does anyone know of any issues importing CS6 Illustrator art into FM 7? We're still using FM 7 (obviously) and one of our vendors is planning on upgrading to CS6. Will they need to back save to a previous version? I vaguely recall hearing about art import issues, but maybe that was with earlier versions of FM. Thanks!___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Read-Write rules for table cell rotation
Hello All FM 11.0.1 structured, using DITA 1.2. I'm hoping some read-write rules guru will be able point me in the right direction... We have some tables in which occasional cell contents are rotated. To do this manually, we select the text and go to the Graphics menu. But since we are using DITA XML, I'd like to save the rotation property to the XML and have FM apply it again when the XML file is reopened. Clearly a job for read-write rules. So after a thorough study of the Structured Application Developer's Guide and the corresponding Reference, as well as the FM11 help, etc., I have attempted with the following: element "entry" { is fm table cell element; attribute "outputclass" { is fm property rotate; value "rotate" is fm value "270"; } } When I set @outputclass to "rotate" and save as XML, the attribute value is not written. If I edit the XML in a text editor and then open in FM, the @outputclass is set to "no value". So clearly nothing is happening using @outputclass and/or my rule. The Developer Reference gives tantalizing information such as "FrameMaker extends the possible values to allow rotations of 0, 90, 80, and 270 degrees." I've tried a whole lot of alternative rules and values, but nothing seems to do anything (except generate an error, that is). Do I need to use or define a different attribute than @outputclass? Or is there some other secret syntax that eludes me? Or does it just not work? Thanks for your help.. Roger Shuttleworth London, Canada ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: FM 10 list of pods becomes detached
Grab the pod and start moving it SLOWLY toward the edge of the "frame" for the FrameMaker application. When you see a faint blue line between it and the frame, stop. It's docked. Took me FOREVER to pick up that one, and it's hard because that line is very slender and if you move too fast you'll miss it. On Mon, Feb 4, 2013 at 3:32 PM, Nancy Allison wrote: > Hi, all. > > I'm using FM 10 on a Win 7 system. > > On the right side of my workspace, the list of pods has become detached. I > can physically move it outside the FM window altogether, which can be quite > helpful, but I'd like to reattach it now. > > It's persisted through opening and closing Frame and even rebooting the > computer. > > I can't figure out how to reattach it. There's got to be something on the > View menu or Preferences . . . what is it? Thanks! > ___ > > > You are currently subscribed to framers as ljsims...@gmail.com. > > Send list messages to framers@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. -- Lin Sims ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 10 list of pods becomes detached
Hi, all. I'm using FM 10 on a Win 7 system. On the right side of my workspace, the list of pods has become detached. I can physically move it outside the FM window altogether, which can be quite helpful, but I'd like to reattach it now. It's persisted through opening and closing Frame and even rebooting the computer. I can't figure out how to reattach it. There's got to be something on the View menu or Preferences . . . what is it? Thanks! ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
FM 7 and CS6 Illustrator art
Does anyone know of any issues importing CS6 Illustrator art into FM 7? We're still using FM 7 (obviously) and one of our vendors is planning on upgrading to CS6. Will they need to back save to a previous version? I vaguely recall hearing about art import issues, but maybe that was with earlier versions of FM. Thanks! -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20130204/da1d19e9/attachment.html>
Read-Write rules for table cell rotation
Hello All FM 11.0.1 structured, using DITA 1.2. I'm hoping some read-write rules guru will be able point me in the right direction... We have some tables in which occasional cell contents are rotated. To do this manually, we select the text and go to the Graphics menu. But since we are using DITA XML, I'd like to save the rotation property to the XML and have FM apply it again when the XML file is reopened. Clearly a job for read-write rules. So after a thorough study of the Structured Application Developer's Guide and the corresponding Reference, as well as the FM11 help, etc., I have attempted with the following: element "entry" { is fm table cell element; attribute "outputclass" { is fm property rotate; value "rotate" is fm value "270"; } } When I set @outputclass to "rotate" and save as XML, the attribute value is not written. If I edit the XML in a text editor and then open in FM, the @outputclass is set to "no value". So clearly nothing is happening using @outputclass and/or my rule. The Developer Reference gives tantalizing information such as "FrameMaker extends the possible values to allow rotations of 0, 90, 80, and 270 degrees." I've tried a whole lot of alternative rules and values, but nothing seems to do anything (except generate an error, that is). Do I need to use or define a different attribute than @outputclass? Or is there some other secret syntax that eludes me? Or does it just not work? Thanks for your help.. Roger Shuttleworth London, Canada
Re: FM11 bug: white text on colored background disappears in CMYK PDF [SOLVED]
Hi group Problem solved! It was not an Fm11 bug, but just an incorrect setting in my color definitions. The color "White" was set to "Don't Print". I changed it to "Print as Process" and "Knock Out" and everything looks OK now. Thank you for your reply, Fred. It pointed me in the right direction. -- Yves Barbion www.scripto.nu ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.