Hi Donald,It sounds like you're looking for an Alphabetical List of Markers. Check that out in the help, or see Ch 20, Creating Other Generated Files in my book.
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335
Hi Val, thanks for the invitation.Although I was unable to use the invitation link you posted, I was able to search on the group name at groups.google.com and apply for membership directly.I figured that info would be useful for anyone else who is interested in joining the group!
-MattMatt R.
Yes, indeed it would be overkill. However, I was recommending Dave go to an install that had yet to be mucked. (a fresh install, not a reinstall)Attempting to remedy the existing mucked files could result in much wheel spinning that might make reinstalling Fm seem like a modest proposal.
-MattMatt
…and please stop taking up bandwidth about an issue that has not been announced as an issue by the TCS team!
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com
On
Lisa, have you tried assigning a table format rather than explicitly formatting the row?
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com
On Jul 17, 2013, at 10:09
Bandwidth is measured also by the number of emails one can reasonably read (and
respond to) in a given length of time.
I can't be the only person who is tired of reading about reactions to the CS
licensing model on this FrameMaker forum…
I don't know anything about Adobe's plans.
Everyone's
Thx!(and grateful for not starting a flame war on the topic!)
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com
On Jul 18, 2013, at 1:32 PM, "Syed Zaeem Hosain
Holy cow,After discount it's only USD74!!!I'm IN!
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com
On Jul 19, 2013, at 2:40 PM, Scott Prentice s...@leximation.com
Yep, but like so many things (CSS, HTML5, EPUB, XML, DITA, Extend/FrameScript) little doses over time can make a big difference.I sat in on an XSLT session by Dave Gash at the STC conference this spring and it helped turn on the lights in under an hour!I'm hopeful this might take me to that next
Ah, the MadCap approach to marketing…not sure I like it so much.Scott makes great stuff, and if you want to help him make more great stuff, by all means, check out what he's doing!
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335
Robert, have you tried the Save as PDF route, with the Adobe PDF print driver
selected?
Same result?
-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 11
On 2013-Jul-22 1:12 PM, Robert CH Shell wrote:
Dear Framers:
I am stuck once more.
I am printing a
Eek, what a headache.Now you know why I maintained the jpegisbad.com website a few years ago…The $8/year I paid for the domain was well-worth the therapy it provided!
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335
David, define your color as Pantone 390C, specify spot color, and use the CMYK
representation as the definition.
Arnis may jump in to explain when Windows stopped bolloxing the colors, but
with Win7, you should have no problems with the file.
Doing a Save as PDF, using the Adobe PDF print
This might clarify things a bit…
http://framemaker.mattrsullivan.com/2010/02/11/pdf-links-in-robohelp-from-frame/
From 2010, but info should be the same.
-Matt
On Aug 2, 2013, at 9:55 AM, Rick Quatro r...@rickquatro.com wrote:
I want to create some links to PDFs in my RoboHelp output. I
I run FrameMaker so much, and crash Fm11 so infrequently, it's pretty fair to say it never crashes. The few times I see a crash it is the result of :a specific file which will not open (either a problematic graphic, or a "corrupted" .fm file)a missing resource (font, graphic, unresolved xref)
4 years and counting…going back to a Win only machine is really not even a consideration.I'm nearly due for another laptop. With video becoming more common, I find my MacBook Air mid-2011 edition needs more graphics power (producing video from Adobe Presenter slows it to a crawl, mostly due to
The Fm11 Reviewer's Guide has a short blurb about Hunspell. Here's a link to the full PDF (about 60Mb)http://bit.ly/1cKH2pTEnhanced dictionary supportAcknowledging the global usage of FrameMaker, and the increasing need forlocalization, FrameMaker 11 has added to our Proximity dictionary support
Hi Ken, since you asked…If you're using your Fm source to create EPUB, spaces and assorted odd characters in files, directories, graphics and (spot) cross-reference markers will prevent the EPUB from validating.I'm now in the habit of using only alphanumeric names for files, directories, and
Hi Carol, perhaps you'd be well-advised to break up the two functions and parcel the work out separately.I've created many effective Word templates that work properly when imported into FrameMaker…it's really more of a function of the style names than the physical attributes of the Word DOT.Once
Fair enough!!As you saw, it was enough to keep me out if it for a while!Massively technical Word numbering…EEEKGlad to hear you found some resources, when I saw your reply, I thought you were still looking for a solution.
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured
Hi Klaus,See the recording of my DITA to PDF webinar I did for Adobe recently. You can find the recording athttp://adobe.ly/15QxArz.You can skip to the 23:25 mark in the recording to listen to the part of the presentation related saving as Fm, and related to the ditafm-output.ini.
-MattMatt R.
I had to do that approximately eleventh-six hundred times in writing the Fm11 book!I set my cursor in the text, between ()'s, and hit paste. Then I used Alt+(down arrow) to wrangle it into position. I don't know that you'll find a faster solution than that...
-MattMatt R.
If only I knew somebody… ;)I don't know how much time the scripting would have saved though. After the effort to script it, I'd still have to id the graphic, and choose the appropriate offset.Really, in this case I never felt like it was slowing me down. By choosing from my button matrix, I only
, Matt Sullivan
wrote:
I had to do that approximately
eleventh-six hundred times in writing the Fm11 book!
I set my cursor in the text, between ()'s, and hit paste.
Then I used Alt+(down arrow) to wrangle it into position. I
don't
Training engineers in tech comm tools is usually about as effective as training tech comms in the software tools the engineers use--that is, it's not generally effective.I recommend the engineers use whatever tool they're most comfortable with (Word) and you provide a template and train them in
Hi Brenda,Either your XML doesn't conform to your internally automated process, or you don't have a working Structured Application for your XML model.As Rick said, the line numbers referring to the XML file will give an indication of what's gone awry. At that point, you need to either modify the
If you open the XML file in a text editor, what's the content model specified at the top of the XML file? Alternately, you can open the XML in Fm8 and use the Set Structured Application File command to see what structapp needs to be added to the Fm11 structapps file.That application needs to be
I often use the Windows Alt+key shortcuts…Alt+o,u,r will rotate clockwiseAlt+o,u,p will rotate counterclockwiseI keep a list of recently used mnemonics like this on a post-it on my screen until they're committed to memory. I like the Esc key shortcuts as well, but find them more difficult to
As far as I can tell, the Save as HTML function in Fm 11 is the same that you see in Fm9.The improvements are in the connection to RoboHelp, and that's been better than Save as HTML since it first appeared in Fm8. For straight HTML output, many use MIF2GO. For my outputs (help systems with
Hi Cheryl,You'll need to validate your EDD (shouldn't be too tough) and recreate a StructApp for Fm11 based upon what you had for Fm7.Again, shouldn't be too tough to recreate your environment. Fm11 includes a StructApp designer, and other details for the improvements to Fm11 (about 50% of the
It sounds like you're changing structure models (some XML model before, and now to DITA)If that's the case, you'll need to convert the current content to DITA, likely using XSLT, and likely using Scott P, Rick Q, or another expert.
-MattMatt R. Sullivanco-authorPublishing Fundamentals:
Tino's instructions are wonderful, but I wanted to clarify one portion…In your structapps.fm, you define the file paths for all necessary files. All files except the DTD itself are genuine FrameMaker files.First, you should make sure that the structapps.fm is of the newest version. Create a new
I solve the dilemma you're facing using what I call a template-based workflow.Realistically, the formats of your docs don't have to be updated until the next time you edit or output content.When you begin a revision cycle on a book, import formats across all child Frame docs. (it's easy to do this
Converting ID for use in Fm is more about strategy than menu options, so you're correct in thinking there's no effective way to directly open or import ID files to Fm.Handling of graphics and connected/disconnected text flows are among the obvious problems.
-MattMatt R. Sullivanco-authorPublishing
Sorry David, but it's your workflow that's tripping you up.I'm sure there are other methods, but here's how I've consistently and confidently defined/updated character tags for many years:Click outside the text flowOpen the Character DesignerChoose your tag from the drop down menuDefine properties
Jo, have the SolidWorks file output as U3D and then sit back and enjoy!Seehttp://mattrsullivan.com/2013/10/recordings/(the DITA to PDF recording in particular, the 3D section is only 5-10 minutes)andhttp://mattrsullivan.com/2013/10/fm11rg/for details and examples.
-MattMatt R.
Standardization inevitably leads to structured authoring, DITA or another model.Structure improves content management, accessibility, localization, and consistency of content.Once you're doing structured authoring, you can use any structured authoring tool you like. Or use multiple tools, if you
Hi David,I agree with your thoughts on the subject, but I believe the engineers would call this "as designed"…I know it could be better, but given that the Character Designer hasn't changed since, well, ever.As such, I'm betting it's not at the top of the To-Do list for the engineers.
-MattMatt R.
Rick Quatro wrote the ExtendScript chapter for my book, and also trains on ExtendScript. He's also a great resource for paid development of FrameScript and ExtendScript.
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335
You'll find a link to a dozen or so reviews, including mine, Bernard's, and
others at:
http://blogs.adobe.com/techcomm/2012/08/consolidated-list-of-framemaker-11-reviews.html
On Dec 6, 2013, at 11:16 AM, Craig, Alison alison.cr...@ultrasonix.com
wrote:
Sometime last year when Frame 11 came
olders for all sections
and figures. The same holds true for your Sections (s:) series and your
Figures (f:) series.
They all will only need building blocks for the related sections within the
series.
It's a double bonus...less errors and less confusion!
-Matt
Matt Sullivan
GRAFIX Training
Yes Wim, you can set properties on import. See your FM Structured Dev Guide
for details on the Read/Write Rules options for your Structured Application
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell & text 714 585-2335
SMS message 714585
I second Lin's solution!
I usually keep my autonumbering documentation on a table on a reference
page. This allows me to have access to it when using the file, rather than
remembering the last place I left the .xls file!
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
If by csv you mean Comma Separated Values, you should be prompted to convert
to a table when using the File > Import > File command.
Set the # of columns and other options and you are done.
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-684
the
minimum, mapping to appropriate formats for various outputs (read as "on
import to RoboHelp")
I limit my formatting to 95% of what I want to keep my doc's under control,
rather than jumping thru the endless hoops needed to achieve 100% of what
others perceive as "perfect"
to 1 screen?
My nVidia driver allows me to send all my open windows to a specific
monitor.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsull
One difference between FM and ID is that FM will only wrap around one side
of a column. That means if you want text on both sides of a graphic, you
must be using a multicolumn layout
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell
rojects out the door, and have enjoyed the process.
Now I'm off to pay my maintenance contract (expiring in 2 weeks...), and to
prep for a TCS integration consult.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 58
Point prior to your installation of the
Adobe software mentioned above, and install from there.
***Nuclear Blast Method***
Use the initial Restore Point, or the Disk Image that likely came with your
computer to start anew. &
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining
Many thanks to Rick Stone, a pal of mine and frequent HATT/Adobe User Forum
contributor for the short version of Mike's list (the same one I've used for
quite a while:
Adobe Wish List
http://adobe.com/go/wish
Same location/infinitely easier to pass along to others!
-Matt
Matt Sullivan
GRAFIX
Wow, apologies for the subject of my last post.
I blame it on either a 5:30 posting time, Outlook, Windows, or all of the
above!
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Matt Sullivan
Sent: Tuesday
Sorry...I read too quickly. The Shift command changes the "Open" to "Open
All", "Save" to "Save All" or "Save All in Book" and "Close" to "Close All"
or "Close All in Book".
Have you saved the book as MIF, then re-ope
inish"
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell 714 585-2335
skype: mattatroundpeg
LinkedIn: http://www.linkedin.com/in/grafixtraining
facebook| plaxo
Click to tell me the social media sites you belong to
-Original Message-
Fro
Hi Stephen,
Have you isolated the individual markers with separate paragraphs or with
character tags? If you have multiple markers within the same para, FM (IIRC)
only recognizes the first.
-Matt
Matt Sullivan
GRAFIX Training & Consulting
office 714 960-6840
cell 714 585-
So they are separate para's, not just separate lines?
I'd be happy to take a peek if you can send an example my way.
-Matt
Matt Sullivan
GRAFIX Training & Consulting
office 714 960-6840
cell 714 585-2335
-Original Message-
From: Stephen O'Brien [mailto:sobr...@innovmetric
. If that's not something you plan on doing
for her, I've helped lots of companies (large & small) with that as well. I
can do it remotely, and bill in as little as 1/4 hour increments.
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell & text
in the EDD could adjust on the fly when structure is
conditionalized
If using structured Frame is not an option, you might explore having a
QuickStart template and a Full Manual Template that make the headings appear
correct without actually changing the para tags.
-Matt
Matt Sullivan
GRAFIX Training
Hi Shlomo,
Are you saying that FrameMaker will have problems producing print and PDF
with a .psd that contains transparency?
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell & text 714 585-2335
SMS message 7145852335 at vtext.com
s
But FM will place a .psd...
A clipping mask will create a smooth, but hard edge.
Is anyone having problems with .psd's containing layer masks or vector masks
(resulting in a soft edge)or other layer transparency?
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
ever need the link again, it's also on the Resources page (on the
FrameMaker course page) at roundpeg.com
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell & text 714 585-2335
SMS message 7145852335 at vtext.com
skype: mattatroundpeg
ng for job
postings here...
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell & text 714 585-2335
SMS message 7145852335 at vtext.com
skype: mattatroundpeg
LinkedIn: http://www.linkedin.com/in/grafixtraining
facebook| plaxo
Click to tell me th
n they get on this and other lists.
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell 714 585-2335
skype: mattatroundpeg
LinkedIn: http://www.linkedin.com/in/grafixtraining
facebook| plaxo
Click to tell me the social media sites you belong to
---
Always a slow process, but as a member of the last 2 beta teams, and
familiar with the engineers, I know that form submission is one of the
easiest ways to make sure an issue is considered.
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell 714
I score it this way:
Richard: 1 point each for 3 consistent and logic observations
John: 3 points for snapping us back into reality
What's the applicable quote here? Something like:
"The reasonable man adjusts to reality, the unreasonable man demands that
reality adjust to him.
All progress
pick
up the master page assignment.
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell 714 585-2335
skype: mattatroundpeg
LinkedIn: http://www.linkedin.com/in/grafixtraining
facebook| plaxo
Click to tell me the social media sites you b
It sounds like a 1-cell table with title would solve your need to float, if
the Title were the trigger in your mapping table.
-Matt
Matt Sullivan
GRAFIX Training
matt at roundpeg.com
www.roundpeg.com
Office 714 960-6840
Cell 714 585-2335
skype: mattatroundpeg
LinkedIn: http
Hi Martin, have you tried "Save as PDF"?
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsullivan
linkedin
facebook
-Original Message-
you need to be as well
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsullivan
linkedin
facebook
-Original Message-
From: framers-boun...@lists.fr
IIRC, FM 5.1 was released a scant few days before or after the acquisition.
In fact, sample documents that still ship with FM9 (Report.fm) still say
"Terramed enters 1995", which is how I remember the year of acquisition.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtr
, but still quite current.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsullivan
linkedin
facebook
-Original Message-
From: framers-
I'd recommend exporting to a Word file, then opening into FM.
Cleanup will certainly be necessary, but then (if desired) you can bring the
FM file into RH by reference if indeed you'll ever need to update the Help
via FM again.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
you
want entirely.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsullivan
linkedin
facebook
-Original Message-
From: framers-
n each such import.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsullivan
linkedin
facebook
-Original Message-
From: framers-boun..
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsullivan
linkedin
facebook
-Original Message-
From: Diane Gaskill [mailto:dgcal...@earthlink.net]
A small addendum...
The Validate will also do things like checking for the existence of the
gotolink marker specified.
You'll get a nastygram from Frame if you put in the gotolink prior to
defining the newlink marker.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
In listening to various sources discuss this, can someone clarify this issue
for me?
Does Frame automatically run in 32-bit mode on a Vista 64-bit system, or do
you have to do setup to get it to run properly.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
idn't help.
Bottom line: reinstalling may be the fastest solution for you.
-Matt
_____
Matt Sullivan
GRAFIX Training
714 960-6840
714 585-2335 cell / <mailto:7145852335 at vtext.com> txt/sms
skype: mattrsullivan
<http://www.grafixtraining.com/> http://www.gra
While there's structured framemaker, dita, and a host of third party plugins
can anyone really say its a simple, painless, and quick process to
transition from unstructured framemaker to either structured or dita?
Sincerely,
Joseph Lorenzini
___
Hi
:
-Knowledge of one's DTD or schema
-No more than 2 hours of hands-on education
-Docs that adhere to a stylesheet
-A day or two to analyse how one's linear paragraph docs map into the
content model (DTD or schema) provided
-Matt
Matt Sullivan
GRAFIX Training
714 960
effeciently and economically help with that transition.
-Matt
Matt Sullivan
GRAFIX Training
714 960-6840
714 585-2335 cell /txt/sms
skype: mattrsullivan
http://www.grafixtraining.com
http://blogs.roundpeg.com
http://www.linkedin.com/in/mattrsullivan
http://twitter.com
Yes, go with Richard's suggestion...convert to a custom font & access that
font by selecting a character format in the autonumbering properties
-Matt
____
Matt Sullivan
GRAFIX Training
714 960-6840
714 585-2335 cell /txt/sms
skype: mattrsullivan
to leverage
company resources who understand the process, or engage someone familiar
with it to speed up development time.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twi
My understanding is that the Schema needs to be converted to a DTD, then
handled from there. Carole, are you aware of a different approach?
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
s
are for institutional
reasons and are not required aspects of AT and FM compatibility.
-Matt
Matt Sullivan
GRAFIX Training
matt at grafixtraining.com
www.grafixtraining.com
office 714 960-6840
cell & txt 714 585-2335
sms message
skype: mattrsullivan
twitter: mattrsullivan
linkedin
facebook
-Orig
For those with RoboHelp or the TCS, I believe the included RoboScreenCapture
has that feature as well.
-Matt
Matt Sullivan
714 585-2335 cell /txt/sms
714 960-6840 office
skype: mattrsullivan
mattrsullivan.wordpress.com
linkedin.com/in/mattrsullivan
or if you have any suggestions!
-Matt
Matt Sullivan
714 585-2335 cell /txt/sms
714 960-6840 office
skype: mattrsullivan
mattrsullivan.wordpress.com
linkedin.com/in/mattrsullivan
twitter.com/mattrsullivan
-Original Message-
From: tcs-users
remove character formatting (like ) from the xref format,
does it hold the formatting from the variable?
-Matt
Matt Sullivan
714 585-2335 cell /txt/sms
714 960-6840 office
skype: mattrsullivan
mattrsullivan.wordpress.com
linkedin.com/in/mattrsullivan
twitt
I don't believe you have that functionality in FM9, but it's a great idea...
Take 2 minutes & post it at adobe.com/go/wish to get the engineers thinking
about it for future releases...the more folks that post, the more likely
you'll see it in the next release.
-Matt
Matt Sullivan
dire
.
Please feel free to pass this along to anyone who might be looking to get
started in using these applications.
Thanks!
-Matt
_
Matt Sullivan
director of training
roundpeg, inc.
<callto:+1888.266.0313> 888.266.0313 x.1009
<callto:+1714%20585-2335> 714 585-2335 ce
a <$chapnum> and then control both the incrementing
and the formatting of that system variable via the Numbering properties.
(Easiest to right click on one or more selected chapters in a book file &
choose numbering.
-Matt
____
Matt Sullivan
GRAFIX Training
714 960-
(OpenSource) to convert into an ePub
format.
-Matt
Matt Sullivan
GRAFIX Training
714 960-6840
714 585-2335 cell /txt/sms
skype: mattrsullivan
http://www.grafixtraining.com
http://blogs.roundpeg.com
http://www.linkedin.com/in/mattrsullivan
http://twitter.com
ock.
-Matt
____
Matt Sullivan
GRAFIX Training
714 960-6840
714 585-2335 cell /txt/sms
skype: mattrsullivan
http://www.grafixtraining.com
http://blogs.roundpeg.com
http://www.linkedin.com/in/mattrsullivan
http://twitter.com/mattrsullivan
http://twitter.com/roundpeginc
-Original Messa
Structured App (R/W Rules, DTD & EDD)
to tighten up the export to XML?
After that, possibly an FDK fix, or script(s) to normalize the file with
your specific XML requirements?
-Matt Sullivan
GRAFIX Training, Inc.
An Adobe Authorized Training Center
www.grafixtraining.com
888 882-
GRAFIX will be holding our standard 2-day Basic and 2-day Adv Frame class in
the Costa Mesa office (7 miles from John Wayne airport)
We still have seats available, and will give a 15% discount off either or
both classes if you mention this announcement.
-Matt Sullivan
GRAFIX Training
my previous business policy.
If anybody needs direct advice, I "know a guy"
Contact me off list if you'd like to email him.
-Matt Sullivan
GRAFIX Training, Inc.
An Adobe Authorized Training Center
www.grafixtraining.com
888 882-2819
-Original Message-
From: framers-bo
' 2pt Anchor para tag to minimize lost space at top of page
I'll let everyone else debate the merits of each approach...
-Matt Sullivan
GRAFIX Training, Inc.
An Adobe Authorized Training Center
www.grafixtraining.com
888 882-2819
-Original Message-
From: framers-bounces+matt
I know this is a bit backward, but does anyone have experience or have any
advice on converting Help formats (specifically Robohelp) into Frame for
printing purposes?
How well does it maintain xref's and stylesheets?
-Matt Sullivan
GRAFIX Training, Inc.
An Adobe Authorized Training
Can you open the svg in Illustrator? If so, can you then import the native
.ai?
-Matt Sullivan
GRAFIX Training, Inc.
An Adobe Authorized Training Center
www.grafixtraining.com
888 882-2819
-Original Message-
From: framers-bounces+matt=grafixtraining@lists.frameusers.com
Try the Format/Document/Change Bars dialog & check the Clear All Change Bars
option...
-Matt Sullivan
GRAFIX Training, Inc.
An Adobe Authorized Training Center
www.grafixtraining.com
888 882-2819
-Original Message-
From: framers-bounces+matt=grafixtrai
Works file into Acro 3D Toolkit as U3D, you
can surface map, articulate, disassemble, then capture whatever format you
want (including the articulating 3D object) into FM 8.
HTH...
-Matt Sullivan
GRAFIX Training, Inc.
An Adobe Authorized Training Center
www.grafixtraining.com
88
201 - 300 of 509 matches
Mail list logo