Re: [Framers] Mif2Go and FM 2015

2016-04-22 Thread Ben Allums
On 4/21/2016 9:52 PM, dion.cm wrote: Thanks for the info. I'm in the middle of a big release also so I won't try anything until afterward. I thought I might have to save down (FM11 in my case), but I hope not because my omnihelp project is about 50-75 files. Good idea about FrameScript. I'll

Re: [Framers] FrameMaker and Salesforce

2016-03-09 Thread Ben Allums
as a Publishing target. Or try dropping by an ePublisher Study Hall session and we can take a crack at it. Ben Allums all...@webworks.com 512-381-8885 ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit

Re: going to SalesForce Knowledge via .csv?

2013-08-16 Thread Ben Allums
primitive that SalesForce will accept. John, That makes sense. Good luck! Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com

going to SalesForce Knowledge via .csv?

2013-08-16 Thread Ben Allums
something less primitive that SalesForce > will accept. John, That makes sense. Good luck! Ben Allums allums at webworks.com 512-381-8885

Re: going to SalesForce Knowledge via .csv?

2013-08-14 Thread Ben Allums
goal. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr

going to SalesForce Knowledge via .csv?

2013-08-14 Thread Ben Allums
t to accomplish your goal. Ben Allums allums at webworks.com 512-381-8885

Re: Eclipse Help from Frame books

2013-07-19 Thread Ben Allums
years ago, that would have been our initial release for the help runtime. Thank you. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers

Eclipse Help from Frame books

2013-07-19 Thread Ben Allums
her for Eclipse Help 5 years ago, that would have been our initial release for the help runtime. Thank you. Ben Allums allums at webworks.com 512-381-8885

Frame versus XSL-FO

2013-03-01 Thread Ben Allums
ier to get what you want without XSL. Folks are working on these problems. Progress is being made. Yet do keep in mind that XSL-FO is a very ambitious specification. Ben Allums allums at webworks.com 512-381-8885

Re: Making IETMs using Frame possible?

2013-01-05 Thread Ben Allums
documentation set: http://www.webworks.com/Documentation/Reverb/ This is created from FrameMaker source files. There are other products available, so perhaps you should evaluate each one in turn and find the best fit tool for your needs. Ben Allums all...@webworks.com 512-381-8885

Making IETMs using Frame possible?

2013-01-04 Thread Ben Allums
h as WebWorks ePublisher. One example is our own documentation set: <http://www.webworks.com/Documentation/Reverb/> This is created from FrameMaker source files. There are other products available, so perhaps you should evaluate each one in turn and find the best fit tool for your needs.

Re: FrameMaker - online help solution

2012-12-01 Thread Ben Allums
take more than a few minutes to download and confirm the behavior. http://www.webworks.com/Tour/Try_ePublisher/ I would recommend that you request to evaluate ePublisher Designer, as you are an experienced Publisher 2003 user. Ben Allums all...@webworks.com 512-381-8885

FrameMaker -> online help solution

2012-11-30 Thread Ben Allums
blisher and see how it works with your content. Shouldn't take more than a few minutes to download and confirm the behavior. <http://www.webworks.com/Tour/Try_ePublisher/> I would recommend that you request to evaluate ePublisher Designer, as you are an experienced Publisher 2003 user

Re: Confluence 4 export: the one feature that would justify my upgrading from FM10

2012-11-29 Thread Ben Allums
. Ben Allums Director of Engineering all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr

Confluence 4 export: the one feature that would justify my upgrading from FM10

2012-11-29 Thread Ben Allums
more documentation of the new storage format. Ben Allums Director of Engineering allums at webworks.com 512-381-8885

Re: Webworks ePublisher price

2012-11-13 Thread Ben Allums
not yet received the invoice. We have no plans to increase pricing for 2013. Our pricing has held stable since the beginning of 2010. Ben Allums Director of Engineering all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers

Webworks ePublisher price

2012-11-13 Thread Ben Allums
if there will be a price > increase for 2013, as I have not yet received the invoice. We have no plans to increase pricing for 2013. Our pricing has held stable since the beginning of 2010. Ben Allums Director of Engineering allums at webworks.com 512-381-8885

Re: Support needed!

2012-07-11 Thread Ben Allums
, but it might do the trick for you. ePublisher is happy to process either WebWorks conditions or SmartDocs conditions during publishing. Also, though I know nothing about it, you could check out Doc-to-Help. They single-source publish from Word documents just like ePublisher. Ben Allums all

Support needed!

2012-07-10 Thread Ben Allums
you could check out Doc-to-Help. They single-source publish from Word documents just like ePublisher. Ben Allums allums at webworks.com 512-381-8885

Re: Frame to eBook

2012-02-11 Thread Ben Allums
of the Adobe TCS. However, if you aren't looking to upgrade your FrameMaker environment just to publish ePUB output, check out WebWorks ePublisher. It works with FrameMaker versions 7.2, 8.0, 9.0, and 10.0. http://www.webworks.com/ Ben Allums all...@webworks.com 512-381-8885

Frame to eBook

2012-02-10 Thread Ben Allums
make use of the Adobe TCS. However, if you aren't looking to upgrade your FrameMaker environment just to publish ePUB output, check out WebWorks ePublisher. It works with FrameMaker versions 7.2, 8.0, 9.0, and 10.0. <http://www.webworks.com/> Ben Allums allums at webworks.com 512-381-8885

Re: HTML Generation and Alinks

2012-01-27 Thread Ben Allums
/Documentation/Reverb/index.html#page/03.Preparing%2520and%2520Publishing%2520Content/Preparing%2520FrameMaker%2520Files.1.51.htm Ben Allums Director of Engineering all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail

HTML Generation and Alinks

2012-01-27 Thread Ben Allums
orking with See Also links (ALinks in CHM parlance): <http://www.webworks.com/Documentation/Reverb/index.html#page/03.Preparing%2520and%2520Publishing%2520Content/Preparing%2520FrameMaker%2520Files.1.51.htm> Ben Allums Director of Engineering allums at webworks.com 512-381-8885

Re: TCS 3.5 RH not playing nice

2012-01-07 Thread Ben Allums
). However, their markup may not exactly match the source document layout. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com

TCS 3.5 RH not playing nice

2012-01-06 Thread Ben Allums
o in some cases). However, their markup may not exactly match the source document layout. Ben Allums allums at webworks.com 512-381-8885

Re: FM 8 to ePub?

2011-11-05 Thread Ben Allums
the ePUB book with ePublisher's Style Designer. Other options may exist, though you might have to spend more time creating the ePUB books than would be worth the effort. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed

Re: HTML output rendering annotations

2011-09-23 Thread Ben Allums
ePublisher was built to do just this task. NOTE: I work for WebWorks. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com

HTML output rendering annotations

2011-09-22 Thread Ben Allums
al. I'll also point out that WebWorks ePublisher was built to do just this task. NOTE: I work for WebWorks. Ben Allums allums at webworks.com 512-381-8885

Re: Index Troubles: No Openable Nongenerated Files?

2011-05-29 Thread Ben Allums
to be an issue with the latest FrameMaker 10. I'd be very happy for Adobe to address this issue some day. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers

Re: Embed MS Excel File in FM8?

2011-05-15 Thread Ben Allums
files as attachments onto PDFs. ePublisher may be able to link to the file, yet it doesn't perform any baggage file handling during pure PDF production Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch

Embed MS Excel File in FM8?

2011-05-13 Thread Ben Allums
her HTML outputs. Of course, neither tool presently embeds Excel files as attachments onto PDFs. ePublisher may be able to link to the file, yet it doesn't perform any "baggage file" handling during pure PDF production Ben Allums allums at webworks.com 512-381-8885

Re: Hyperlinking Between Frame and MS Word Source

2011-02-08 Thread Ben Allums
. http://wiki.webworks.com/HelpCenter/Tips/Linking%20between%20Frame and%20Word Enjoy! Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers

Re: Hyperlinking Between Frame and MS Word Source

2011-02-08 Thread Ben Allums
the different document types in your project. ;-) And yes, this trick is also possible to do with DITA documents. You can mix/match content from all three sources to create a unified deliverable with ePublisher. Ben Allums all...@webworks.com 512-381-8885

Hyperlinking Between Frame and MS Word Source

2011-02-08 Thread Ben Allums
le ePublisher project up on the WebWorks wiki if you'd like to try it out. <http://wiki.webworks.com/HelpCenter/Tips/Linking%20between%20Frame and%20Word> Enjoy! Ben Allums allums at webworks.com 512-381-8885

Hyperlinking Between Frame and MS Word Source

2011-02-08 Thread Ben Allums
he links between the different document types in your project. ;-) And yes, this trick is also possible to do with DITA documents. You can mix/match content from all three sources to create a unified deliverable with ePublisher. Ben Allums allums at webworks.com 512-381-8885

Re: Compiling FM into help files (wfp file)

2011-01-16 Thread Ben Allums
of the style settings. ePublisher itself is now up to version 2010.3 and still includes support for generating CHM output. Ben Allums all...@webworks.com 512-381-8885 On 1/13/2011 9:23 AM, Pam Reichert wrote: I have a copy of the old WebWorks ePublisher Pro version 9.2 if you need

Compiling FM into help files (wfp file)

2011-01-14 Thread Ben Allums
grate much of the style settings. ePublisher itself is now up to version 2010.3 and still includes support for generating CHM output. Ben Allums allums at webworks.com 512-381-8885 On 1/13/2011 9:23 AM, Pam Reichert wrote: > I have a copy of the old WebWorks ePublisher Pro version 9.

Re: eBooks, EPUB, using FrameMaker

2010-12-15 Thread Ben Allums
with various ePUB readers and demonstrates ePublisher options to address them (large image handling, wide table layouts, etc.) Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send

eBooks, EPUB, using FrameMaker

2010-12-14 Thread Ben Allums
20-%20September%202010/> The segment also discusses inherent limitations you may encounter with various ePUB readers and demonstrates ePublisher options to address them (large image handling, wide table layouts, etc.) Ben Allums allums at webworks.com 512-381-8885

Re: Help Tools

2010-10-15 Thread Ben Allums
are thinking about have things were done for WebWorks Publisher a few years back, you'd see things are quite different now. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list

Help Tools

2010-10-15 Thread Ben Allums
abuse as you like. Again, all of this related to WebWorks ePublisher. If you are thinking about have things were done for WebWorks Publisher a few years back, you'd see things are quite different now. Ben Allums allums at webworks.com 512-381-8885

Re: Fwd: Help Tools

2010-10-13 Thread Ben Allums
ePublisher 2010.2 against current MIF2Go, RoboHelp, and Flare packages. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe

Re: Fwd: Help Tools

2010-10-13 Thread Ben Allums
project, then you can easily switch to the latest, greatest format versions that ship with 2010.2. Ben Allums all...@webworks.com 512-381-8885 ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to fram

Fwd: Help Tools

2010-10-13 Thread Ben Allums
great tool for single-sourcing both your content and your design. I'd just ask that you compare our latest, greatest ePublisher 2010.2 against current MIF2Go, RoboHelp, and Flare packages. Ben Allums allums at webworks.com 512-381-8885

Fwd: Help Tools

2010-10-13 Thread Ben Allums
custom code in your project, then you can easily switch to the latest, greatest format versions that ship with 2010.2. Ben Allums allums at webworks.com 512-381-8885

Fwd: Help Tools

2010-10-13 Thread Ben Allums
On 10/13/2010 2:57 PM, Ben Allums wrote: > On 10/13/2010, Art Campbell wrote: >> If you've done massive amounts of tweaking to the ePublisher templates, >> that may be your easiest way to go. Along with that, I can't believe >> that their customer support department can'