I have the same too. Started about 4 weeks ago.
Same setup.
---
Peter
On 2019-05-13 15:26, Tom Beiswenger wrote:
Every time that I generate a book using the Save As PDF command, I get
a "Confirm Security" dialog asking me "Are you sure that this file is
from a trustworthy source and you
Select all rows of the table and make sure keep with next or previous
are not set
Go to the table designes and chech that widow/orpan rows is not set too
large.
---
Peter
On 2017-04-25 14:17, Studio Smalbro wrote:
Running FM 2015 and I cannot make FrameMaker break tables across
pages. It
Get rid of it - it's just pompous writing. Especially important if your
documents go to non-native-English speakers.
"Shown in" is universally understood. "Illustrated in" less so.
---
Peter
On 2016-05-31 17:50, Stephen O'Brien wrote:
Hi,
A new technical writer uses « exemplified in Fig.
You should always go for the single source approach - provided you
expect the content to always remain the same - one file, inserted twice.
---
Peter
On 2015-06-17 14:13, John Posada wrote:
Pursuing this text insert approach, which is better practice...lets
say I have a couple pages of
Please, when replying to the digest, trim out all the unnecessary messages.
All that you have included will go into the next digest and the archive.
Also don't forget to edit the subject line.
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
Hi,
For the sake of all non-Americans, can you please give the times of these,
and other webinars also in UTC. I think we can all work out our local times
from that but many don't know the offset of the various US time zones from
UTC.
Peter (in Ireland)
From:
The * shows that an override has been made - this may or may not be
needed. If you re-apply the style and discard overrides that change will
be lost forever.
Work on a copy of the file and compare old with new afterwards, or
create a PDF from the whole book and use that as your reference to
See if you can find a tool to delete unused styles - that may shorten
your job.
I can't get at my FrameMaker at the moment, but I'm sure you can search
for a style. Then just open the paragraph designer for each and look
for differences.
---
Peter
On 2014-09-24 17:13, LGLists wrote:
FM
We use one to make the page count even - adds or removes a Notes page
before the back cover. I'm not sure if it can be modified to add more.
I'll take a look later
---
Peter
On 2014-02-27 11:03, Wim Hooghwinkel - idtp wrote:
Hi,
anyone knows of an existing (extend)script or utility that
After that incident he should have an enforced change of job.
Anyone who can't cope with the pressures of the job that includes
difficult customers (not that I'm saying Art was in anyway difficult)
shouldn't be doing the job.
---
Peter
On 2013-08-12 20:28, Bethany Lee wrote:
I want to
After that incident he should have an enforced change of job.
Anyone who can't cope with the pressures of the job that includes
"difficult" customers (not that I'm saying Art was in anyway difficult)
shouldn't be doing the job.
---
Peter
On 2013-08-12 20:28, Bethany Lee wrote:
> I want to
I think the only way to get a definitive answer is to ask Adobe.
I suspect that by the time we get to TCS6 the only way will be with a
subscription model. As long as the annual fee is not more than we're
used to paying for our regular upgrades (depending on how often you
upgrade of course)
I think the only way to get a definitive answer is to ask Adobe.
I suspect that by the time we get to TCS6 the only way will be with a
subscription model. As long as the annual fee is not more than we're
used to paying for our regular upgrades (depending on how often you
upgrade of course)
Sorry, don't know how I managed to include the framers list in that.
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Peter Hirons
Sent: Monday, March 04, 2013 4:40 PM
To: Arild Rodland; rian.whe...@atmel.com; Denehan, Joe
needing engineering review
But you just know we are all checking them now! :)
On 05 March 2013 at 12:06 Peter Hirons pe...@galley.ie wrote:
Sorry, don’t know how I managed to include the framers list in that.
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun
Sorry, don't know how I managed to include the framers list in that.
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Peter Hirons
Sent: Monday, March 04, 2013 4:40 PM
To: Arild Rodland; Rian.Whelan at atmel.com; Denehan, Joe
needing engineering review
But you just know we are all checking them now! :)
On 05 March 2013 at 12:06 Peter Hirons wrote:
Sorry, don?t know how I managed to include the framers list in that.
Peter
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun
Hi,
These should also be reviewed by Marketing and NPI.
Please get any comments back to me by end of your working day on
Wednesday 6th March.
Peter
Regards,
Peter Hirons
Galley Technical Services Ltd
+353 86 309 2725
-- next part --
An HTML attachment
Kristy,
Do you have Automatic Change Bars turned on? (Format | Document | Change
bars )
FM re-creates X-refs every time it prints (or creates a PDF) and that
could trigger a new changebar.
Peter
From: framers-boun...@lists.frameusers.com
Kristy,
Do you have Automatic Change Bars turned on? (Format | Document | Change
bars )
FM re-creates X-refs every time it prints (or creates a PDF) and that
could trigger a new changebar.
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at
I frequently hit this problem, but my solution is to define a custom
paper size of 8.25 x 11 inches. This will print on both paper sizes
without problems and means you don't have the problems of making things
fit.
Peter
From: framers-boun...@lists.frameusers.com
The nearest ISO (Note: International Standards organisation - not just
European) size is A3, which just happens to be twice the area of A4.
That's approx. 11.5 x 16.5 inches (exactly 297 x 420 mm). If I had to
deal with that and your quaint tabloid size I'd set up a custom size of
11 x 16.5.
I frequently hit this problem, but my solution is to define a custom
paper size of 8.25 x 11 inches. This will print on both paper sizes
without problems and means you don't have the problems of making things
fit.
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at
The nearest ISO (Note: International Standards organisation - not just
European) size is A3, which just happens to be twice the area of A4.
That's approx. 11.5 x 16.5 inches (exactly 297 x 420 mm). If I had to
deal with that and your quaint tabloid size I'd set up a custom size of
11 x 16.5.
I
Resetting the date is not a viable solution due to versioning issues.
As others have suggested, a free upgrade to FM11 would seem to be an
appropriate response from Adobe.
In the short term this is costing me serious money! As a freelance
author, I had hoped to do a solid day's work
Further to the last message from me - I tried the support chat system
three times yesterday and three time my call was dropped without
resolution and with no attempt by the support person to get back to me.
Dreadful service!
Peter
From: framers-boun...@lists.frameusers.com
Resetting the date is not a viable solution due to versioning issues.
As others have suggested, a free upgrade to FM11 would seem to be an
appropriate response from Adobe.
In the short term this is costing me serious money! As a freelance
author, I had hoped to do a solid day's work
Further to the last message from me - I tried the support "chat" system
three times yesterday and three time my call was dropped without
resolution and with no attempt by the support person to get back to me.
Dreadful service!
Peter
From: framers-boun...@lists.frameusers.com
I have the same problem. It might be New Year's Day, but I was planning
to put in a few hours' work.
Which number did you call Shlomo?
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Shlomo Perets
Sent: Tuesday, January 01,
I have the same problem. It might be New Year's Day, but I was planning
to put in a few hours' work.
Which number did you call Shlomo?
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Shlomo Perets
Sent: Tuesday, January 01,
Just jumping in on this - are files exchangeable between 10 and 11
without complicated save as requirements?
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Art Campbell
Sent: Monday, December 10, 2012 3:46 PM
To: Alison Craig;
Just jumping in on this - are files exchangeable between 10 and 11
without complicated "save as" requirements?
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Art Campbell
Sent: Monday, December 10, 2012 3:46 PM
To: Alison Craig;
Wouldn't it be easier to move the graphics folder? In any case, all you
need to do is find the first graphic and make sure use new path for all
graphics (may not be exact wording) is selected.
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com]
Wouldn't it be easier to move the graphics folder? In any case, all you
need to do is find the first graphic and make sure "use new path for all
graphics" (may not be exact wording) is selected.
Peter
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at
Do what your Style Guide says. If you don't have a Style Guide, then
pick either Sentence case or Title case and be consistent. I prefer
sentence for fogure and table titles.
---
Peter
On 23.03.2012 07:12, hessiansx4 wrote:
I'm up against a deadline, and wondered if anyone has insight
Do what your Style Guide says. If you don't have a Style Guide, then
pick either Sentence case or Title case and be consistent. I prefer
sentence for fogure and table titles.
---
Peter
On 23.03.2012 07:12, hessiansx4 wrote:
> I'm up against a deadline, and wondered if anyone has insight
Have you checked that you have the correct master pages applied?
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Robert
Lauriston
Sent: Wednesday, February 15, 2012 11:28 PM
To: framers@lists.frameusers.com
Have you checked that you have the correct master pages applied?
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Robert
Lauriston
Sent: Wednesday, February 15, 2012 11:28 PM
To: framers at
I strongly suspect that you will not be able to buy anything other than the
latest version through the normal channels. Most software companies insist that
their dealers withdraw the old version when the new on comes along.
You might find an older version from a back-street box shifter or
I strongly suspect that you will not be able to buy anything other than the
latest version through the normal channels. Most software companies insist that
their dealers withdraw the old version when the new on comes along.
You might find an older version from a back-street box shifter or
I'm in love.
A beer-loving woman who also says Sod the wedding
:-)
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Milton,
Cynthia
Sent: Thursday, April 28, 2011 10:56 AM
To: Reng, Dr. Winfried;
Apologies for the cross-posting, but I'm sure I've seen the answer to
this on one of these lists, but can't find it.
Running on Win XP Sp3.
I have a copy of TCS1.3 (I know it's old, but it's a long story) that
refuses to accept the serial number. I currently have it running as a
30-day trial
I'm in love.
A beer-loving woman who also says "Sod the wedding"
:-)
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Milton,
Cynthia
Sent: Thursday, April 28, 2011 10:56 AM
To: Reng, Dr. Winfried; framers
Apologies for the cross-posting, but I'm sure I've seen the answer to
this on one of these lists, but can't find it.
Running on Win XP Sp3.
I have a copy of TCS1.3 (I know it's old, but it's a long story) that
refuses to accept the serial number. I currently have it running as a
30-day trial
So free support isn't really free !
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of William
Abernathy
Sent: Thursday, October 28, 2010 11:37 PM
To: Yves Barbion
Cc: framers@lists.frameusers.com
Subject: Re:
So "free" support isn't really free !
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of William
Abernathy
Sent: Thursday, October 28, 2010 11:37 PM
To: Yves Barbion
Cc: framers at lists.frameusers.com
Howard,
Change your view to master pages then search again.
Peter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Howard Rauch
Sent: 21 October 2008 11:30
To: framers@lists.frameusers.com
Subject: Unresolved Cross Reference
Perhaps someone has a
Howard,
Change your view to "master pages" then search again.
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Howard Rauch
Sent: 21 October 2008 11:30
To: framers at lists.frameusers.com
Subject:
Gurus,
Does anyone know if it is possible to get FM to print with line numbers?
If so, how?
I have reviewers wanting this.
Peter
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To
Gurus,
Does anyone know if it is possible to get FM to print with line numbers?
If so, how?
I have reviewers wanting this.
Peter
I would strongly suggest giving the folders numeric names in the
mmdd format (e.g. 20080929) then you will be easily able to find the
latest.
Peter
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Art Campbell
Sent: 29 September 2008 12:34
To:
I would strongly suggest giving the folders numeric names in the
mmdd format (e.g. 20080929) then you will be easily able to find the
latest.
Peter
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Art
Deidre (and anyone else who's interested)
Sarah O'Keefe's Framemaker 7: The Complete Reference has been
re-published under a slightly different title. I spoke to her about 18
months ago and she assured me that it was the same content -- and yes, it
is an excellent reference.
--
Regards,
Loretta,
What you are probably seeing is a result of the screen - sometimes the
line triggers one row of pixels and sometimes two, making it look thicker.
When you increase the magnification all lines trigger two (or more rows)
and look the same.
If you move the image around on the screen do
Loretta,
What you are probably seeing is a result of the screen - sometimes the
line triggers one row of pixels and sometimes two, making it look thicker.
When you increase the magnification all lines trigger two (or more rows)
and look the same.
If you move the image around on the screen do
55 matches
Mail list logo
