RE: Frame11 no text flow, no new page

[a...@ant-davey.com]

Richard and Roger,

Thank you both for replying.  It got me looking in the right places.  It
transpires my page set up was set to double-sided printing, but with ignore
blank pages selected. Changing this to force the document to have an even number
of pages (which I thought I had already done) has resolved the issue.

Best regards,
Ant

On 02 October 2012 at 15:17 Combs, Richard richard.co...@polycom.com wrote:
 a...@ant-davey.com wrote:

  I have a set of unstructured Frame templates, which I have been using
  for 3+ years.  Originally built for Frame9, and used on FM10 within
  TCS3 without any significant issues, I now find that at the end of the
  text frame on page 1 the text continues 'under' the frame and does not
  flow onto a newly created page.  Forcing a page break does not have any
  effect either.

 Control-click the text frame to select it, and then right-click and select
 Object Properties. In the dialog box, on the right under Flow, Autoconnect is
 probably not selected. This is the setting that tells FM to create new pages
 in that flow as needed to hold the contents of the flow.

 Instead of just turning it on, however, you should probably try to find out
 why it's off in a template that you've been using for quite some time. Check
 the Autoconnect setting on the master pages. On the body page with the
 problem, make sure the right master page is being used and that you're not
 actually putting the text into a rogue text frame sitting on top of the text
 frame from the master page (it happens).

 HTH!

 Richard G. Combs
 Senior Technical Writer
 Polycom, Inc.
 richardDOTcombs AT polycomDOTcom
 303-223-5111
 --
 rgcombs AT gmailDOTcom
 303-903-6372
 --





___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Frame11 no text flow, no new page

[a...@ant-davey.com]

Richard and Roger,

Thank you both for replying.  It got me looking in the right places.  It
transpires my page set up was set to double-sided printing, but with ignore
blank pages selected. Changing this to force the document to have an even number
of pages (which I thought I had already done) has resolved the issue.

Best regards,
Ant

On 02 October 2012 at 15:17 "Combs, Richard"  
wrote:
> ant at ant-davey.com wrote:
>
> > I have a set of unstructured Frame templates, which I have been using
> > for 3+ years.  Originally built for Frame9, and used on FM10 within
> > TCS3 without any significant issues, I now find that at the end of the
> > text frame on page 1 the text continues 'under' the frame and does not
> > flow onto a newly created page.  Forcing a page break does not have any
> > effect either.
>
> Control-click the text frame to select it, and then right-click and select
> Object Properties. In the dialog box, on the right under Flow, Autoconnect is
> probably not selected. This is the setting that tells FM to create new pages
> in that flow as needed to hold the contents of the flow.
>
> Instead of just turning it on, however, you should probably try to find out
> why it's off in a template that you've been using for quite some time. Check
> the Autoconnect setting on the master pages. On the body page with the
> problem, make sure the right master page is being used and that you're not
> actually putting the text into a "rogue" text frame sitting on top of the text
> frame from the master page (it happens).
>
> HTH!
>
> Richard G. Combs
> Senior Technical Writer
> Polycom, Inc.
> richardDOTcombs AT polycomDOTcom
> 303-223-5111
> --
> rgcombs AT gmailDOTcom
> 303-903-6372
> --
>
>
>
>
>
>
-- next part --
An HTML attachment was scrubbed...
URL: 

RE: Frame11 no text flow, no new page

[Combs, Richard]

a...@ant-davey.com wrote:
 
 I have a set of unstructured Frame templates, which I have been using
 for 3+ years.  Originally built for Frame9, and used on FM10 within
 TCS3 without any significant issues, I now find that at the end of the
 text frame on page 1 the text continues 'under' the frame and does not
 flow onto a newly created page.  Forcing a page break does not have any
 effect either.

Control-click the text frame to select it, and then right-click and select 
Object Properties. In the dialog box, on the right under Flow, Autoconnect is 
probably not selected. This is the setting that tells FM to create new pages in 
that flow as needed to hold the contents of the flow. 

Instead of just turning it on, however, you should probably try to find out why 
it's off in a template that you've been using for quite some time. Check the 
Autoconnect setting on the master pages. On the body page with the problem, 
make sure the right master page is being used and that you're not actually 
putting the text into a rogue text frame sitting on top of the text frame 
from the master page (it happens).

HTH!

Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-903-6372
--





 
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Frame11 no text flow, no new page

[Combs, Richard]

ant at ant-davey.com wrote:

> I have a set of unstructured Frame templates, which I have been using
> for?3+ years.? Originally built for Frame9, and used on FM10 within
> TCS3 without any significant issues, I now find that at the end of the
> text frame on page 1 the text continues 'under' the frame and does not
> flow onto a newly created page.? Forcing a page break does not have any
> effect either.

Control-click the text frame to select it, and then right-click and select 
Object Properties. In the dialog box, on the right under Flow, Autoconnect is 
probably not selected. This is the setting that tells FM to create new pages in 
that flow as needed to hold the contents of the flow. 

Instead of just turning it on, however, you should probably try to find out why 
it's off in a template that you've been using for quite some time. Check the 
Autoconnect setting on the master pages. On the body page with the problem, 
make sure the right master page is being used and that you're not actually 
putting the text into a "rogue" text frame sitting on top of the text frame 
from the master page (it happens).

HTH!

Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-903-6372
--

Frame11 no text flow, no new page

[a...@ant-davey.com]

Hi All,

Despite having TCS4 installed for a couple of weeks, I'm only just getting
around to writing a new document...

I have a set of unstructured Frame templates, which I have been using for 3+
years.  Originally built for Frame9, and used on FM10 within TCS3 without any
significant issues, I now find that at the end of the text frame on page 1 the
text continues 'under' the frame and does not flow onto a newly created page.
 Forcing a page break does not have any effect either.

I'm working in structured Frame even though the templates are not structured.
Currently in Authoring view.

I don't recall having this issue with any existing documents opened in FM11 but
produced in FM9 or 10.  Has anybody encountered this, or have any ideas for
resolving the issue?

Many thanks,
Ant
-- next part --
An HTML attachment was scrubbed...
URL: