RE: Distiller 7 missing fonts
Roger, This error occur when the Distiller setting When embedding fails is set to Cancel job *and* Distiller cannot find the .PFB file. Your Distiller Font locations points to C:\PSFONTS\PFM. Traditionally Adobe Type Manager is NOT storing .PFB files in this folder, but rather in the C:\PSFONTS folder. Hence, check the specific location for the .PFB file and add that folder to your Distiller font locations. BTW, I'm quite certain that native Type 1 fonts do not have the permission flag at all -- this is an OpenType/TrueType thing. However, some conversion processes may add a permission flag on-the-go to the resulting fonts embedded in the final PDF document. Best regards Jacob Schäffer Grafikhuset (House of Graphics) Paradis Allé 22, Ramløse DK-3200 Helsinge, Denmark Phone: +45 4439 4400 Email: [EMAIL PROTECTED] Web: www.grafikhuset.net -Oprindelig meddelelse- Fra: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] På vegne af Shuttleworth, Roger Sendt: 6. februar 2008 22:00 Til: framers@lists.frameusers.com Emne: Distiller 7 missing fonts Hello All (sigh) I know this question must have been asked dozens of times. Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ And a couple of other places. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And When embedding fails is set to Cancel job. I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Any ideas? Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/js%40grafi khuset.dk Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: Distiller 7 missing fonts
Thanks to all who replied regarding my missing fonts problem. The answer was a Jakob Schäffer suggested below; as soon as I added C:\PSFONTS to the Distiller font locations (i.e. pointing to the PFB file) the problem went away. Thanks also to Fred Ridder for a warning regarding use of ATM Lite with Windows XP. I've now removed it. BTW, I was fairly sure it was not a font licensing issue, because Distiller in that case issues a more specific message: font cannot be embedded because of licensing restrictions or something similar. Regards, Roger This error occurs when the Distiller setting When embedding fails is set to Cancel job *and* Distiller cannot find the .PFB file. Your Distiller Font locations points to C:\PSFONTS\PFM. Traditionally Adobe Type Manager is NOT storing .PFB files in this folder, but rather in the C:\PSFONTS folder. Hence, check the specific location for the .PFB file and add that folder to your Distiller font locations. Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Distiller 7 missing fonts
Roger, Have you tried printing to pdf, using the Adobe PDF driver? I would suggest printing to a postscript file and manually Distilling it so you can see what is going on at stage. Also,... > > -Original Message- > From: framers-bounces at lists.frameusers.com > [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Shuttleworth, > Roger > Sent: Wednesday, February 06, 2008 1:00 PM > To: framers at lists.frameusers.com > Subject: Distiller 7 missing fonts > > > Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. > Windows XP SP2. > > > > I try to create a PDF from FrameMaker using File > Save as PDF. > Distiller fires up but fails to produce a PDF (because of my settings) > with the following message: > > > > %%[ ProductName: Distiller ]%% > > %%[ Error: GillSans not found. Font cannot be embedded. ]%% > > %%[ Error: invalidfont; OffendingCommand: findfont ]%% > > > > The GillSans it refers to is installed on my system using ATM Lite. It's > a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. > There are a number of related fonts - the italic, bold, etc. I am not really up on Windows stuff but I thought you didn't have to use ATM to install fonts anymore, least ways I haven't since NT. The Fonts Control Panel provides an very nice interface for managing your fonts. It may be that ATM is putting the postscript files into a directory that Distiller is unaware of. > In Distiller the font locations are set to: > > > C:\PSFONTS\PFM\ > > C:\Windows\Fonts\ > > C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ > Well they look fairly standard :/ > And a couple of other places. > More than likely. > > > In Distiller's Adobe PDF Settings the Embed all fonts option is checked, > as is Subset embedded fonts when percent...is less than 100%. And "When > embedding fails" is set to Cancel job. > Have you Tried setting it to replace with another font? To confirm the file will print without it? > I removed and reinstalled the fonts from the original disk using ATM, > but the message still appears. In FrameMaker the paragraph formats using > these fonts are OK - i.e. the font is not greyed in the paragraph > designer. > Note the comment above. Cheers Alan -- Alan Litchfield MBus (Hons), MNZCS AlphaByte PO Box 1941, Auckland http://www.alphabyte.co.nz
Distiller 7 missing fonts
Hi Roger I've got no idea what could be wrong with your font, but just thought I'd comment that we use that font and have no problems with embedding it. Our font files are dated 14/10/1999. Using FM7.0 and Win XP SP2. Did it work in the past for you, or is this the first time you've tried to use GillSans? Cheers, Rebecca >>> "Owen, Clint" 7/02/08 10:10 >>> Some fonts are restricted from being embedded by the font foundry. It is an attribute of the font files. This prevents them from being extracted from the PDF by a third party and reused. Clint Owen Technical Publications Crane Aerospace & Electronics 425-743-8674 -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Shuttleworth, Roger Sent: Wednesday, February 06, 2008 1:00 PM To: framers at lists.frameusers.com Subject: Distiller 7 missing fonts Hello All (sigh) I know this question must have been asked dozens of times. Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File > Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ And a couple of other places. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And "When embedding fails" is set to Cancel job. I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Any ideas? Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com ___ NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs.
Distiller 7 missing fonts
Roger, This error occur when the Distiller setting "When embedding fails" is set to "Cancel job" *and* Distiller cannot find the .PFB file. Your Distiller Font locations points to C:\PSFONTS\PFM. Traditionally Adobe Type Manager is NOT storing .PFB files in this folder, but rather in the C:\PSFONTS folder. Hence, check the specific location for the .PFB file and add that folder to your Distiller font locations. BTW, I'm quite certain that native Type 1 fonts do not have the permission flag at all -- this is an OpenType/TrueType thing. However, some conversion processes may add a permission flag on-the-go to the resulting fonts embedded in the final PDF document. Best regards Jacob Sch?ffer Grafikhuset (House of Graphics) Paradis All? 22, Raml?se DK-3200 Helsinge, Denmark Phone: +45 4439 4400 Email: js at grafikhuset.dk Web: www.grafikhuset.net > -Oprindelig meddelelse- > Fra: framers-bounces at lists.frameusers.com > [mailto:framers-bounces at lists.frameusers.com] P? vegne af > Shuttleworth, Roger > Sendt: 6. februar 2008 22:00 > Til: framers at lists.frameusers.com > Emne: Distiller 7 missing fonts > > > Hello All > > > > (sigh) I know this question must have been asked dozens of times. > > > > Using FrameMaker 7.1 p116 and Acrobat Professional > (Distiller) 7.0.7. Windows XP SP2. > > > > I try to create a PDF from FrameMaker using File > Save as > PDF. Distiller fires up but fails to produce a PDF (because > of my settings) with the following message: > > > > %%[ ProductName: Distiller ]%% > > %%[ Error: GillSans not found. Font cannot be embedded. ]%% > > %%[ Error: invalidfont; OffendingCommand: findfont ]%% > > > > The GillSans it refers to is installed on my system using ATM > Lite. It's a Type 1 PostScript produced by Adobe, file name > GN___.pfm and .pfb. There are a number of related fonts - the > italic, bold, etc. > > > > In Distiller the font locations are set to: > > > > C:\PSFONTS\PFM\ > > C:\Windows\Fonts\ > > C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ > > > > And a couple of other places. > > > > In Distiller's Adobe PDF Settings the Embed all fonts option > is checked, as is Subset embedded fonts when percent...is > less than 100%. And "When embedding fails" is set to Cancel job. > > > > I removed and reinstalled the fonts from the original disk > using ATM, but the message still appears. In FrameMaker the > paragraph formats using these fonts are OK - i.e. the font is > not greyed in the paragraph designer. > > > > Any ideas? > > > > > > Roger Shuttleworth > > Technical Publications > > TVWorks Canada, Inc. > > 150 Dufferin Avenue > > London, Ontario > > N6A 5N6 > > Canada > > Tel. 519 963-4368 > > www.tvworks.com > > > > ___ > > > You are currently subscribed to Framers as js at grafikhuset.dk. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/js%40grafi khuset.dk Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Distiller 7 missing fonts
Thanks to all who replied regarding my missing fonts problem. The answer was a Jakob Sch?ffer suggested below; as soon as I added C:\PSFONTS to the Distiller font locations (i.e. pointing to the PFB file) the problem went away. Thanks also to Fred Ridder for a warning regarding use of ATM Lite with Windows XP. I've now removed it. BTW, I was fairly sure it was not a font licensing issue, because Distiller in that case issues a more specific message: "font cannot be embedded because of licensing restrictions" or something similar. Regards, Roger Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com
Distiller 7 missing fonts
Hello All (sigh) I know this question must have been asked dozens of times. Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ And a couple of other places. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And When embedding fails is set to Cancel job. I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Any ideas? Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Distiller 7 missing fonts
Some fonts are restricted from being embedded by the font foundry. It is an attribute of the font files. This prevents them from being extracted from the PDF by a third party and reused. Clint Owen Technical Publications Crane Aerospace Electronics 425-743-8674 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shuttleworth, Roger Sent: Wednesday, February 06, 2008 1:00 PM To: framers@lists.frameusers.com Subject: Distiller 7 missing fonts Hello All (sigh) I know this question must have been asked dozens of times. Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ And a couple of other places. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And When embedding fails is set to Cancel job. I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Any ideas? Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/clint.owen%40craneae rospace.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info. We value your opinion! How may we serve you better? Please click the below survey link to tell us how we are doing. http://www.craneae.com/surveys/satisfaction.htm Your feedback is of the utmost importance to us! Thank you for your time! ## Attention: The information contained in this email message may be privileged and is confidential information intended only for the use of the recipient, or any employee or agent responsible to deliver it to the intended recipient. Any unauthorized use, distribution or copying of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately and destroy the original message and all attachments from your electronic files. This email was scanned and cleared by MailMarshal. ## ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Distiller 7 missing fonts
Roger, Have you tried printing to pdf, using the Adobe PDF driver? I would suggest printing to a postscript file and manually Distilling it so you can see what is going on at stage. Also,... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shuttleworth, Roger Sent: Wednesday, February 06, 2008 1:00 PM To: framers@lists.frameusers.com Subject: Distiller 7 missing fonts Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. I am not really up on Windows stuff but I thought you didn't have to use ATM to install fonts anymore, least ways I haven't since NT. The Fonts Control Panel provides an very nice interface for managing your fonts. It may be that ATM is putting the postscript files into a directory that Distiller is unaware of. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ Well they look fairly standard :/ And a couple of other places. More than likely. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And When embedding fails is set to Cancel job. Have you Tried setting it to replace with another font? To confirm the file will print without it? I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Note the comment above. Cheers Alan -- Alan Litchfield MBus (Hons), MNZCS AlphaByte PO Box 1941, Auckland http://www.alphabyte.co.nz ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
RE: Distiller 7 missing fonts
Hi Roger I've got no idea what could be wrong with your font, but just thought I'd comment that we use that font and have no problems with embedding it. Our font files are dated 14/10/1999. Using FM7.0 and Win XP SP2. Did it work in the past for you, or is this the first time you've tried to use GillSans? Cheers, Rebecca Owen, Clint [EMAIL PROTECTED] 7/02/08 10:10 Some fonts are restricted from being embedded by the font foundry. It is an attribute of the font files. This prevents them from being extracted from the PDF by a third party and reused. Clint Owen Technical Publications Crane Aerospace Electronics 425-743-8674 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shuttleworth, Roger Sent: Wednesday, February 06, 2008 1:00 PM To: framers@lists.frameusers.com Subject: Distiller 7 missing fonts Hello All (sigh) I know this question must have been asked dozens of times. Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ And a couple of other places. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And When embedding fails is set to Cancel job. I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Any ideas? Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com ___ NOTICE: This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error please notify Allied Telesis Labs Ltd immediately. Any views expressed in this message are those of the individual sender, except where the sender has the authority to issue and specifically states them to be the views of Allied Telesis Labs. ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Re: Distiller 7 missing fonts
Some fonts are restricted from being embedded by the font foundry. It is an attribute of the font files. This prevents them from being extracted from the PDF by a third party and reused. Except that Adobe fonts all permit embedding, and he said he had an Adobe font. (Maybe it was different with really old versions of the font?) Mike Wickham ___ You are currently subscribed to Framers as [EMAIL PROTECTED] Send list messages to [EMAIL PROTECTED] To unsubscribe send a blank email to [EMAIL PROTECTED] or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to [EMAIL PROTECTED] Visit http://www.frameusers.com/ for more resources and info.
Distiller 7 missing fonts
Hello All (sigh) I know this question must have been asked dozens of times. Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File > Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ And a couple of other places. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And "When embedding fails" is set to Cancel job. I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Any ideas? Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com
Distiller 7 missing fonts
Some fonts are restricted from being embedded by the font foundry. It is an attribute of the font files. This prevents them from being extracted from the PDF by a third party and reused. Clint Owen Technical Publications Crane Aerospace & Electronics 425-743-8674 -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Shuttleworth, Roger Sent: Wednesday, February 06, 2008 1:00 PM To: framers at lists.frameusers.com Subject: Distiller 7 missing fonts Hello All (sigh) I know this question must have been asked dozens of times. Using FrameMaker 7.1 p116 and Acrobat Professional (Distiller) 7.0.7. Windows XP SP2. I try to create a PDF from FrameMaker using File > Save as PDF. Distiller fires up but fails to produce a PDF (because of my settings) with the following message: %%[ ProductName: Distiller ]%% %%[ Error: GillSans not found. Font cannot be embedded. ]%% %%[ Error: invalidfont; OffendingCommand: findfont ]%% The GillSans it refers to is installed on my system using ATM Lite. It's a Type 1 PostScript produced by Adobe, file name GN___.pfm and .pfb. There are a number of related fonts - the italic, bold, etc. In Distiller the font locations are set to: C:\PSFONTS\PFM\ C:\Windows\Fonts\ C:\Program Files\Adobe\Adobe Acrobat 7.0\Resource\Font\ And a couple of other places. In Distiller's Adobe PDF Settings the Embed all fonts option is checked, as is Subset embedded fonts when percent...is less than 100%. And "When embedding fails" is set to Cancel job. I removed and reinstalled the fonts from the original disk using ATM, but the message still appears. In FrameMaker the paragraph formats using these fonts are OK - i.e. the font is not greyed in the paragraph designer. Any ideas? Roger Shuttleworth Technical Publications TVWorks Canada, Inc. 150 Dufferin Avenue London, Ontario N6A 5N6 Canada Tel. 519 963-4368 www.tvworks.com ___ You are currently subscribed to Framers as Clint.Owen at craneaerospace.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/clint.owen%40craneae rospace.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. We value your opinion! How may we serve you better? Please click the below survey link to tell us how we are doing. http://www.craneae.com/surveys/satisfaction.htm Your feedback is of the utmost importance to us! Thank you for your time! ## Attention: The information contained in this email message may be privileged and is confidential information intended only for the use of the recipient, or any employee or agent responsible to deliver it to the intended recipient. Any unauthorized use, distribution or copying of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately and destroy the original message and all attachments from your electronic files. This email was scanned and cleared by MailMarshal. ##