RE: Missing registration marks

2009-12-07 Thread Reng, Dr. Winfried
Hi,

That's not fully correct. You can do either of
the following:
o Deactivate Generate Acrobat Data as Linda said.
o Or you can have Generate Acrobat Data activated and
  set the margins to 0 in Acrobat in Document | Crop Pages.
  This way you do not need to create 2 PDF files out of
  FrameMaker.

Best regards

Winfried

 -Original Message-
 From: framers-boun...@lists.frameusers.com 
 [mailto:framers-boun...@lists.frameusers.com] On Behalf Of 
 Linda G. Gallagher
 Sent: Saturday, December 05, 2009 6:16 PM
 To: 'Fred Ridder'; pe...@knowhowpro.com
 Cc: framers@lists.frameusers.com
 Subject: RE: Missing registration marks
 
 I've not followed this whole thread, so maybe someone has 
 covered this, but
 you also need to deselect the Generate Acrobat Data option in 
 the FM print
 dialog. 
 
 
 ~
 Linda G. Gallagher
 TechCom Plus, LLC
 lindag at techcomplus dot com
 www.techcomplus.com
 303-450-9076 or 800-500-3144
 User guides, online help, FrameMaker and
 WebWorks ePublisher templates
 
 RMIMA Membership Manager
 www.RMIMA.org
 
 
 
 -Original Message-
 From: framers-boun...@lists.frameusers.com
 [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Fred Ridder
 Sent: Saturday, December 05, 2009 9:18 AM
 To: pe...@knowhowpro.com
 Cc: framers@lists.frameusers.com
 Subject: RE: Missing registration marks
 
 
 Peter Gold wrote:
 
  The paper size has to be larger enough than the page size 
 to display
  the marks. IOW, a slightly-larger paper size may not have 
 enough room
  for the marks. Try a tabloid or larger paper size.
 
 
 Absolutely correct. But the paper size only needs to be 1 
 larger in each
 dimension than the page size. According to Linda's last post, 
 there should
 be plenty of room. She reported a page size of 5.827 by 8.268 being
 printed to letter-size paper, which is an oversize of 2.673 
 in width and
 2.732 in height. So this doesn't look like the problem, either.
 
  
 
 -Fred Ridder
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-07 Thread Branam, Linda C
Oh, my goodness, Winfried!! IT WORKS!!!

THANKS SO MUCH!

Thanks,
Linda 

-Original Message-
From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Reng, Dr. Winfried
Sent: Monday, December 07, 2009 2:40 AM
To: framers@lists.frameusers.com
Subject: RE: Missing registration marks

Hi,

That's not fully correct. You can do either of
the following:
o Deactivate Generate Acrobat Data as Linda said.
o Or you can have Generate Acrobat Data activated and
  set the margins to 0 in Acrobat in Document | Crop Pages.
  This way you do not need to create 2 PDF files out of
  FrameMaker.

Best regards

Winfried

 -Original Message-
 From: framers-boun...@lists.frameusers.com 
 [mailto:framers-boun...@lists.frameusers.com] On Behalf Of 
 Linda G. Gallagher
 Sent: Saturday, December 05, 2009 6:16 PM
 To: 'Fred Ridder'; pe...@knowhowpro.com
 Cc: framers@lists.frameusers.com
 Subject: RE: Missing registration marks
 
 I've not followed this whole thread, so maybe someone has 
 covered this, but
 you also need to deselect the Generate Acrobat Data option in 
 the FM print
 dialog. 
 
 
 ~
 Linda G. Gallagher
 TechCom Plus, LLC
 lindag at techcomplus dot com
 www.techcomplus.com
 303-450-9076 or 800-500-3144
 User guides, online help, FrameMaker and
 WebWorks ePublisher templates
 
 RMIMA Membership Manager
 www.RMIMA.org
 
 
 
 -Original Message-
 From: framers-boun...@lists.frameusers.com
 [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Fred Ridder
 Sent: Saturday, December 05, 2009 9:18 AM
 To: pe...@knowhowpro.com
 Cc: framers@lists.frameusers.com
 Subject: RE: Missing registration marks
 
 
 Peter Gold wrote:
 
  The paper size has to be larger enough than the page size 
 to display
  the marks. IOW, a slightly-larger paper size may not have 
 enough room
  for the marks. Try a tabloid or larger paper size.
 
 
 Absolutely correct. But the paper size only needs to be 1 
 larger in each
 dimension than the page size. According to Linda's last post, 
 there should
 be plenty of room. She reported a page size of 5.827 by 8.268 being
 printed to letter-size paper, which is an oversize of 2.673 
 in width and
 2.732 in height. So this doesn't look like the problem, either.
 
  
 
 -Fred Ridder
___


You are currently subscribed to Framers as bra...@hp.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit http://lists.frameusers.com/mailman/options/framers/branam%40hp.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Missing registration marks

2009-12-07 Thread Reng, Dr. Winfried
Hi,

That's not fully correct. You can do either of
the following:
o Deactivate "Generate Acrobat Data" as Linda said.
o Or you can have "Generate Acrobat Data" activated and
  set the margins to 0 in Acrobat in "Document | Crop Pages".
  This way you do not need to create 2 PDF files out of
  FrameMaker.

Best regards

Winfried

> -Original Message-
> From: framers-bounces at lists.frameusers.com 
> [mailto:framers-bounces at lists.frameusers.com] On Behalf Of 
> Linda G. Gallagher
> Sent: Saturday, December 05, 2009 6:16 PM
> To: 'Fred Ridder'; peter at knowhowpro.com
> Cc: framers at lists.frameusers.com
> Subject: RE: Missing registration marks
> 
> I've not followed this whole thread, so maybe someone has 
> covered this, but
> you also need to deselect the Generate Acrobat Data option in 
> the FM print
> dialog. 
> 
> 
> ~
> Linda G. Gallagher
> TechCom Plus, LLC
> lindag at techcomplus dot com
> www.techcomplus.com
> 303-450-9076 or 800-500-3144
> User guides, online help, FrameMaker and
> WebWorks ePublisher templates
> 
> RMIMA Membership Manager
> www.RMIMA.org
> 
> 
> 
> -Original Message-
> From: framers-bounces at lists.frameusers.com
> [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Fred Ridder
> Sent: Saturday, December 05, 2009 9:18 AM
> To: peter at knowhowpro.com
> Cc: framers at lists.frameusers.com
> Subject: RE: Missing registration marks
> 
> 
> Peter Gold wrote:
> 
> > The paper size has to be "larger enough" than the page size 
> to display
> > the marks. IOW, a slightly-larger paper size may not have 
> enough room
> > for the marks. Try a tabloid or larger paper size.
> 
> 
> Absolutely correct. But the paper size only needs to be 1" 
> larger in each
> dimension than the page size. According to Linda's last post, 
> there should
> be plenty of room. She reported a page size of 5.827" by 8.268" being
> printed to letter-size paper, which is an oversize of 2.673" 
> in width and
> 2.732" in height. So this doesn't look like the problem, either.
> 
>  
> 
> -Fred Ridder


Missing registration marks

2009-12-07 Thread Branam, Linda C
Oh, my goodness, Winfried!! IT WORKS!!!

THANKS SO MUCH!

Thanks,
Linda 

-Original Message-
From: framers-bounces at lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Reng, Dr. Winfried
Sent: Monday, December 07, 2009 2:40 AM
To: framers at lists.frameusers.com
Subject: RE: Missing registration marks

Hi,

That's not fully correct. You can do either of
the following:
o Deactivate "Generate Acrobat Data" as Linda said.
o Or you can have "Generate Acrobat Data" activated and
  set the margins to 0 in Acrobat in "Document | Crop Pages".
  This way you do not need to create 2 PDF files out of
  FrameMaker.

Best regards

Winfried

> -Original Message-
> From: framers-bounces at lists.frameusers.com 
> [mailto:framers-bounces at lists.frameusers.com] On Behalf Of 
> Linda G. Gallagher
> Sent: Saturday, December 05, 2009 6:16 PM
> To: 'Fred Ridder'; peter at knowhowpro.com
> Cc: framers at lists.frameusers.com
> Subject: RE: Missing registration marks
> 
> I've not followed this whole thread, so maybe someone has 
> covered this, but
> you also need to deselect the Generate Acrobat Data option in 
> the FM print
> dialog. 
> 
> 
> ~
> Linda G. Gallagher
> TechCom Plus, LLC
> lindag at techcomplus dot com
> www.techcomplus.com
> 303-450-9076 or 800-500-3144
> User guides, online help, FrameMaker and
> WebWorks ePublisher templates
> 
> RMIMA Membership Manager
> www.RMIMA.org
> 
> 
> 
> -Original Message-
> From: framers-bounces at lists.frameusers.com
> [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Fred Ridder
> Sent: Saturday, December 05, 2009 9:18 AM
> To: peter at knowhowpro.com
> Cc: framers at lists.frameusers.com
> Subject: RE: Missing registration marks
> 
> 
> Peter Gold wrote:
> 
> > The paper size has to be "larger enough" than the page size 
> to display
> > the marks. IOW, a slightly-larger paper size may not have 
> enough room
> > for the marks. Try a tabloid or larger paper size.
> 
> 
> Absolutely correct. But the paper size only needs to be 1" 
> larger in each
> dimension than the page size. According to Linda's last post, 
> there should
> be plenty of room. She reported a page size of 5.827" by 8.268" being
> printed to letter-size paper, which is an oversize of 2.673" 
> in width and
> 2.732" in height. So this doesn't look like the problem, either.
> 
>  
> 
> -Fred Ridder
___


You are currently subscribed to Framers as branam at hp.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscribe at lists.frameusers.com
or visit http://lists.frameusers.com/mailman/options/framers/branam%40hp.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Re: Missing registration marks

2009-12-05 Thread Art Campbell
I believe you have to specify the Press Quality Distiller Job options too,
although the PDF Xa standard also support them -- some others may.

Art Campbell
 art.campb...@gmail.com
 ... In my opinion, there's nothing in this world beats a '52 Vincent and a
redheaded girl. -- Richard Thompson
 No disclaimers apply.
  DoD 358


On Fri, Dec 4, 2009 at 9:30 PM, Branam, Linda C bra...@hp.com wrote:

 OK, I must not be doing something right. I bought and downloaded the Frame
 7.0 guide from Scriptorium (THANKS, Nadine!). I'm trying to follow the
 directions (which parallel the ones that the list gave me) but no luck.

 I'm printing to letter size paper, so in the PDF Setup dialog box I set the
 page size at 5.827 by 8.268. Then in the Printer Setup dialog box for the
 Adobe PDF printer, I first selected Letter and printed. When that didn't
 work I tried again with A4. Still no luck.

 Any suggestions?


 Thanks,
 Linda

 -Original Message-
 From: framers-boun...@lists.frameusers.com [mailto:
 framers-boun...@lists.frameusers.com] On Behalf Of Branam, Linda C
 Sent: Friday, December 04, 2009 7:45 PM
 To: Mike Wickham; Frame Users
 Subject: RE: Missing registration marks

 Thanks to everyone who told me about the page size setting. I'll try that
 out.


 Thanks,
 Linda

 -Original Message-
 From: Mike Wickham [mailto:i...@mikewickham.com]
 Sent: Friday, December 04, 2009 7:41 PM
 To: Branam, Linda C; Frame Users
 Subject: Re: Missing registration marks

 You have to set the paper size larger than the page size so that there is
 room to show the registration marks.


 ___


 You are currently subscribed to Framers as bra...@hp.com.

 Send list messages to fram...@lists.frameusers.com.

 To unsubscribe send a blank email to
 framers-unsubscr...@lists.frameusers.com
 or visit
 http://lists.frameusers.com/mailman/options/framers/branam%40hp.com

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.
 ___


 You are currently subscribed to Framers as art.campb...@gmail.com.

 Send list messages to fram...@lists.frameusers.com.

 To unsubscribe send a blank email to
 framers-unsubscr...@lists.frameusers.com
 or visit
 http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-05 Thread Fred Ridder

I just tried creating a PDF with registration marks from FrameMaker 8.0 and 
Acrobat 9.0 Pro using the print to Adobe PDF printer method with the Standard 
job options (box standard Adobe setup) and it worked fine. It even worked fine 
using the Smallest File Size job options settings. So that doesn't appear to be 
the problem.

-Fred Ridder
 
 From: art.campb...@gmail.com
 Date: Sat, 5 Dec 2009 08:56:13 -0500
 Subject: Re: Missing registration marks
 To: bra...@hp.com
 CC: framers@lists.frameusers.com; i...@mikewickham.com
 
 I believe you have to specify the Press Quality Distiller Job options too,
 although the PDF Xa standard also support them -- some others may.
 
 Art Campbell
 art.campb...@gmail.com
 ... In my opinion, there's nothing in this world beats a '52 Vincent and a
 redheaded girl. -- Richard Thompson
 No disclaimers apply.
 DoD 358
 
 
 On Fri, Dec 4, 2009 at 9:30 PM, Branam, Linda C bra...@hp.com wrote:
 
  OK, I must not be doing something right. I bought and downloaded the Frame
  7.0 guide from Scriptorium (THANKS, Nadine!). I'm trying to follow the
  directions (which parallel the ones that the list gave me) but no luck.
 
  I'm printing to letter size paper, so in the PDF Setup dialog box I set the
  page size at 5.827 by 8.268. Then in the Printer Setup dialog box for the
  Adobe PDF printer, I first selected Letter and printed. When that didn't
  work I tried again with A4. Still no luck.
 
  Any suggestions?
  
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Re: Missing registration marks

2009-12-05 Thread Peter Gold
On Sat, Dec 5, 2009 at 9:32 AM, Fred Ridder docu...@hotmail.com wrote:

 I just tried creating a PDF with registration marks from FrameMaker 8.0 and 
 Acrobat 9.0 Pro using the print to Adobe PDF printer method with the 
 Standard job options (box standard Adobe setup) and it worked fine. It even 
 worked fine using the Smallest File Size job options settings. So that 
 doesn't appear to be the problem.

 -Fred Ridder

The paper size has to be larger enough than the page size to display
the marks. IOW, a slightly-larger paper size may not have enough room
for the marks. Try a tabloid or larger paper size.

HTH

Regards,

Peter
___
Peter Gold
KnowHow ProServices
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-05 Thread Fred Ridder

Peter Gold wrote:

 The paper size has to be larger enough than the page size to display
 the marks. IOW, a slightly-larger paper size may not have enough room
 for the marks. Try a tabloid or larger paper size.


Absolutely correct. But the paper size only needs to be 1 larger in each 
dimension than the page size. According to Linda's last post, there should be 
plenty of room. She reported a page size of 5.827 by 8.268 being printed to 
letter-size paper, which is an oversize of 2.673 in width and 2.732 in 
height. So this doesn't look like the problem, either.

 

-Fred Ridder
  
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-05 Thread Linda G. Gallagher
I've not followed this whole thread, so maybe someone has covered this, but
you also need to deselect the Generate Acrobat Data option in the FM print
dialog. 


~
Linda G. Gallagher
TechCom Plus, LLC
lindag at techcomplus dot com
www.techcomplus.com
303-450-9076 or 800-500-3144
User guides, online help, FrameMaker and
WebWorks ePublisher templates

RMIMA Membership Manager
www.RMIMA.org



-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Fred Ridder
Sent: Saturday, December 05, 2009 9:18 AM
To: pe...@knowhowpro.com
Cc: framers@lists.frameusers.com
Subject: RE: Missing registration marks


Peter Gold wrote:

 The paper size has to be larger enough than the page size to display
 the marks. IOW, a slightly-larger paper size may not have enough room
 for the marks. Try a tabloid or larger paper size.


Absolutely correct. But the paper size only needs to be 1 larger in each
dimension than the page size. According to Linda's last post, there should
be plenty of room. She reported a page size of 5.827 by 8.268 being
printed to letter-size paper, which is an oversize of 2.673 in width and
2.732 in height. So this doesn't look like the problem, either.

 

-Fred Ridder
  
___


You are currently subscribed to Framers as lin...@techcomplus.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/lindag%40techcomplus.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-05 Thread Fred Ridder


Good one Linda. I forgot about that and nobody had mentioned it yet. I'll bet 
money that this was the cause of Linda Branam's problem. 

Registration marks and interactive features like hyperlinks are for mutually 
exclusive applications.

-Fred Ridder

 
 From: lin...@techcomplus.com
 To: docu...@hotmail.com; pe...@knowhowpro.com
 Subject: RE: Missing registration marks
 Date: Sat, 5 Dec 2009 10:16:21 -0700
 CC: framers@lists.frameusers.com
 
 I've not followed this whole thread, so maybe someone has covered this, but
 you also need to deselect the Generate Acrobat Data option in the FM print
 dialog. 
  
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Re: Missing registration marks

2009-12-05 Thread Peter Gold
Sounds like someone should enter a feature request to fix the UI so
this is made clear.

Regards,

Peter
___
Peter Gold
KnowHow ProServices



On Sat, Dec 5, 2009 at 11:53 AM, Fred Ridder docu...@hotmail.com wrote:


 Good one Linda. I forgot about that and nobody had mentioned it yet. I'll bet 
 money that this was the cause of Linda Branam's problem.

 Registration marks and interactive features like hyperlinks are for mutually 
 exclusive applications.

 -Fred Ridder

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-05 Thread Branam, Linda C
Thanks, Linda. Great name, by the way. :-)

No one mentioned it, but I found it in the book I downloaded, so I've been 
watching for that. 

But it certainly would have been a useful hint if I didn't have the book.


Thanks again,
Linda 
-Original Message-
From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Linda G. Gallagher
Sent: Saturday, December 05, 2009 11:16 AM
To: 'Fred Ridder'; pe...@knowhowpro.com
Cc: framers@lists.frameusers.com
Subject: RE: Missing registration marks

I've not followed this whole thread, so maybe someone has covered this, but
you also need to deselect the Generate Acrobat Data option in the FM print
dialog. 


~
Linda G. Gallagher
TechCom Plus, LLC
lindag at techcomplus dot com
www.techcomplus.com
303-450-9076 or 800-500-3144
User guides, online help, FrameMaker and
WebWorks ePublisher templates

RMIMA Membership Manager
www.RMIMA.org



-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Fred Ridder
Sent: Saturday, December 05, 2009 9:18 AM
To: pe...@knowhowpro.com
Cc: framers@lists.frameusers.com
Subject: RE: Missing registration marks


Peter Gold wrote:

 The paper size has to be larger enough than the page size to display
 the marks. IOW, a slightly-larger paper size may not have enough room
 for the marks. Try a tabloid or larger paper size.


Absolutely correct. But the paper size only needs to be 1 larger in each
dimension than the page size. According to Linda's last post, there should
be plenty of room. She reported a page size of 5.827 by 8.268 being
printed to letter-size paper, which is an oversize of 2.673 in width and
2.732 in height. So this doesn't look like the problem, either.

 

-Fred Ridder
  
___


You are currently subscribed to Framers as lin...@techcomplus.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/lindag%40techcomplus.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

___


You are currently subscribed to Framers as bra...@hp.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit http://lists.frameusers.com/mailman/options/framers/branam%40hp.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Missing registration marks

2009-12-05 Thread Branam, Linda C

I wanted registration marks to appear on my PDF version of the Frame doc, and I 
specified them everywhere I could think of, but they aren't showing, even 
though I made sure Western was selected in both the Print Book dialog and the 
subdialog PDF Setup for Selected Files.

Anyone have an idea what's going on?


Thanks,
Linda

Linda Frost Branam
Senior Technical Editor - Aesbus Knowledge Solutions
HP Personal Systems Group--Notebooks
Cell: 832-692-8326




Missing registration marks

2009-12-05 Thread Branam, Linda C
Thanks to everyone who told me about the page size setting. I'll try that out. 


Thanks,
Linda 

-Original Message-
From: Mike Wickham [mailto:i...@mikewickham.com] 
Sent: Friday, December 04, 2009 7:41 PM
To: Branam, Linda C; Frame Users
Subject: Re: Missing registration marks 

You have to set the paper size larger than the page size so that there is room 
to show the registration marks.




Missing registration marks

2009-12-05 Thread Branam, Linda C
OK, I must not be doing something right. I bought and downloaded the Frame 7.0 
guide from Scriptorium (THANKS, Nadine!). I'm trying to follow the directions 
(which parallel the ones that the list gave me) but no luck.

I'm printing to letter size paper, so in the PDF Setup dialog box I set the 
page size at 5.827" by 8.268". Then in the Printer Setup dialog box for the 
Adobe PDF printer, I first selected Letter and printed. When that didn't work I 
tried again with A4. Still no luck.

Any suggestions?


Thanks,
Linda 

-Original Message-
From: framers-bounces at lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Branam, Linda C
Sent: Friday, December 04, 2009 7:45 PM
To: Mike Wickham; Frame Users
Subject: RE: Missing registration marks 

Thanks to everyone who told me about the page size setting. I'll try that out. 


Thanks,
Linda 

-Original Message-
From: Mike Wickham [mailto:i...@mikewickham.com]
Sent: Friday, December 04, 2009 7:41 PM
To: Branam, Linda C; Frame Users
Subject: Re: Missing registration marks 

You have to set the paper size larger than the page size so that there is room 
to show the registration marks.


___


You are currently subscribed to Framers as branam at hp.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit http://lists.frameusers.com/mailman/options/framers/branam%40hp.com

Send administrative questions to listadmin at frameusers.com. Visit 
http://www.frameusers.com/ for more resources and info.


Missing registration marks

2009-12-05 Thread Art Campbell
I believe you have to specify the Press Quality Distiller Job options too,
although the PDF Xa standard also support them -- some others may.

Art Campbell
 art.campbell at gmail.com
 "... In my opinion, there's nothing in this world beats a '52 Vincent and a
redheaded girl." -- Richard Thompson
 No disclaimers apply.
  DoD 358


On Fri, Dec 4, 2009 at 9:30 PM, Branam, Linda C  wrote:

> OK, I must not be doing something right. I bought and downloaded the Frame
> 7.0 guide from Scriptorium (THANKS, Nadine!). I'm trying to follow the
> directions (which parallel the ones that the list gave me) but no luck.
>
> I'm printing to letter size paper, so in the PDF Setup dialog box I set the
> page size at 5.827" by 8.268". Then in the Printer Setup dialog box for the
> Adobe PDF printer, I first selected Letter and printed. When that didn't
> work I tried again with A4. Still no luck.
>
> Any suggestions?
>
>
> Thanks,
> Linda
>
> -Original Message-
> From: framers-bounces at lists.frameusers.com [mailto:
> framers-bounces at lists.frameusers.com] On Behalf Of Branam, Linda C
> Sent: Friday, December 04, 2009 7:45 PM
> To: Mike Wickham; Frame Users
> Subject: RE: Missing registration marks
>
> Thanks to everyone who told me about the page size setting. I'll try that
> out.
>
>
> Thanks,
> Linda
>
> -Original Message-
> From: Mike Wickham [mailto:info at mikewickham.com]
> Sent: Friday, December 04, 2009 7:41 PM
> To: Branam, Linda C; Frame Users
> Subject: Re: Missing registration marks
>
> You have to set the paper size larger than the page size so that there is
> room to show the registration marks.
>
>
> ___
>
>
> You are currently subscribed to Framers as branam at hp.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit
> http://lists.frameusers.com/mailman/options/framers/branam%40hp.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
> ___
>
>
> You are currently subscribed to Framers as art.campbell at gmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit
> http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>


Missing registration marks

2009-12-05 Thread Fred Ridder

I just tried creating a PDF with registration marks from FrameMaker 8.0 and 
Acrobat 9.0 Pro using the "print to Adobe PDF printer" method with the Standard 
job options (box standard Adobe setup) and it worked fine. It even worked fine 
using the Smallest File Size job options settings. So that doesn't appear to be 
the problem.

-Fred Ridder

> From: art.campbell at gmail.com
> Date: Sat, 5 Dec 2009 08:56:13 -0500
> Subject: Re: Missing registration marks
> To: branam at hp.com
> CC: framers at lists.frameusers.com; info at mikewickham.com
> 
> I believe you have to specify the Press Quality Distiller Job options too,
> although the PDF Xa standard also support them -- some others may.
> 
> Art Campbell
> art.campbell at gmail.com
> "... In my opinion, there's nothing in this world beats a '52 Vincent and a
> redheaded girl." -- Richard Thompson
> No disclaimers apply.
> DoD 358
> 
> 
> On Fri, Dec 4, 2009 at 9:30 PM, Branam, Linda C  wrote:
> 
> > OK, I must not be doing something right. I bought and downloaded the Frame
> > 7.0 guide from Scriptorium (THANKS, Nadine!). I'm trying to follow the
> > directions (which parallel the ones that the list gave me) but no luck.
> >
> > I'm printing to letter size paper, so in the PDF Setup dialog box I set the
> > page size at 5.827" by 8.268". Then in the Printer Setup dialog box for the
> > Adobe PDF printer, I first selected Letter and printed. When that didn't
> > work I tried again with A4. Still no luck.
> >
> > Any suggestions?



Missing registration marks

2009-12-05 Thread Peter Gold
On Sat, Dec 5, 2009 at 9:32 AM, Fred Ridder  wrote:
>
> I just tried creating a PDF with registration marks from FrameMaker 8.0 and 
> Acrobat 9.0 Pro using the "print to Adobe PDF printer" method with the 
> Standard job options (box standard Adobe setup) and it worked fine. It even 
> worked fine using the Smallest File Size job options settings. So that 
> doesn't appear to be the problem.
>
> -Fred Ridder

The paper size has to be "larger enough" than the page size to display
the marks. IOW, a slightly-larger paper size may not have enough room
for the marks. Try a tabloid or larger paper size.

HTH

Regards,

Peter
___
Peter Gold
KnowHow ProServices


Missing registration marks

2009-12-05 Thread Fred Ridder

Peter Gold wrote:

> The paper size has to be "larger enough" than the page size to display
> the marks. IOW, a slightly-larger paper size may not have enough room
> for the marks. Try a tabloid or larger paper size.


Absolutely correct. But the paper size only needs to be 1" larger in each 
dimension than the page size. According to Linda's last post, there should be 
plenty of room. She reported a page size of 5.827" by 8.268" being printed to 
letter-size paper, which is an oversize of 2.673" in width and 2.732" in 
height. So this doesn't look like the problem, either.



-Fred Ridder



Missing registration marks

2009-12-05 Thread Linda G. Gallagher
I've not followed this whole thread, so maybe someone has covered this, but
you also need to deselect the Generate Acrobat Data option in the FM print
dialog. 


~
Linda G. Gallagher
TechCom Plus, LLC
lindag at techcomplus dot com
www.techcomplus.com
303-450-9076 or 800-500-3144
User guides, online help, FrameMaker and
WebWorks ePublisher templates

RMIMA Membership Manager
www.RMIMA.org



-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Fred Ridder
Sent: Saturday, December 05, 2009 9:18 AM
To: peter at knowhowpro.com
Cc: framers at lists.frameusers.com
Subject: RE: Missing registration marks


Peter Gold wrote:

> The paper size has to be "larger enough" than the page size to display
> the marks. IOW, a slightly-larger paper size may not have enough room
> for the marks. Try a tabloid or larger paper size.


Absolutely correct. But the paper size only needs to be 1" larger in each
dimension than the page size. According to Linda's last post, there should
be plenty of room. She reported a page size of 5.827" by 8.268" being
printed to letter-size paper, which is an oversize of 2.673" in width and
2.732" in height. So this doesn't look like the problem, either.



-Fred Ridder

___


You are currently subscribed to Framers as lindag at techcomplus.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/lindag%40techcomplus.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.



Missing registration marks

2009-12-05 Thread Fred Ridder


Good one Linda. I forgot about that and nobody had mentioned it yet. I'll bet 
money that this was the cause of Linda Branam's problem. 

Registration marks and interactive features like hyperlinks are for mutually 
exclusive applications.

-Fred Ridder


> From: lindag at techcomplus.com
> To: docudoc at hotmail.com; peter at knowhowpro.com
> Subject: RE: Missing registration marks
> Date: Sat, 5 Dec 2009 10:16:21 -0700
> CC: framers at lists.frameusers.com
> 
> I've not followed this whole thread, so maybe someone has covered this, but
> you also need to deselect the Generate Acrobat Data option in the FM print
> dialog. 



Missing registration marks

2009-12-05 Thread Peter Gold
Sounds like someone should enter a feature request to fix the UI so
this is made clear.

Regards,

Peter
___
Peter Gold
KnowHow ProServices



On Sat, Dec 5, 2009 at 11:53 AM, Fred Ridder  wrote:
>
>
> Good one Linda. I forgot about that and nobody had mentioned it yet. I'll bet 
> money that this was the cause of Linda Branam's problem.
>
> Registration marks and interactive features like hyperlinks are for mutually 
> exclusive applications.
>
> -Fred Ridder
>


Missing registration marks

2009-12-05 Thread Branam, Linda C
Thanks, Linda. Great name, by the way. :-)

No one mentioned it, but I found it in the book I downloaded, so I've been 
watching for that. 

But it certainly would have been a useful hint if I didn't have the book.


Thanks again,
Linda 
-Original Message-
From: framers-bounces at lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Linda G. Gallagher
Sent: Saturday, December 05, 2009 11:16 AM
To: 'Fred Ridder'; peter at knowhowpro.com
Cc: framers at lists.frameusers.com
Subject: RE: Missing registration marks

I've not followed this whole thread, so maybe someone has covered this, but
you also need to deselect the Generate Acrobat Data option in the FM print
dialog. 


~
Linda G. Gallagher
TechCom Plus, LLC
lindag at techcomplus dot com
www.techcomplus.com
303-450-9076 or 800-500-3144
User guides, online help, FrameMaker and
WebWorks ePublisher templates

RMIMA Membership Manager
www.RMIMA.org



-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Fred Ridder
Sent: Saturday, December 05, 2009 9:18 AM
To: peter at knowhowpro.com
Cc: framers at lists.frameusers.com
Subject: RE: Missing registration marks


Peter Gold wrote:

> The paper size has to be "larger enough" than the page size to display
> the marks. IOW, a slightly-larger paper size may not have enough room
> for the marks. Try a tabloid or larger paper size.


Absolutely correct. But the paper size only needs to be 1" larger in each
dimension than the page size. According to Linda's last post, there should
be plenty of room. She reported a page size of 5.827" by 8.268" being
printed to letter-size paper, which is an oversize of 2.673" in width and
2.732" in height. So this doesn't look like the problem, either.



-Fred Ridder

___


You are currently subscribed to Framers as lindag at techcomplus.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/lindag%40techcomplus.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

___


You are currently subscribed to Framers as branam at hp.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscribe at lists.frameusers.com
or visit http://lists.frameusers.com/mailman/options/framers/branam%40hp.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Missing registration marks

2009-12-04 Thread Branam, Linda C

I wanted registration marks to appear on my PDF version of the Frame doc, and I 
specified them everywhere I could think of, but they aren't showing, even 
though I made sure Western was selected in both the Print Book dialog and the 
subdialog PDF Setup for Selected Files.

Anyone have an idea what's going on?


Thanks,
Linda

Linda Frost Branam
Senior Technical Editor - Aesbus Knowledge Solutions
HP Personal Systems Group--Notebooks
Cell: 832-692-8326


___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Re: Missing registration marks

2009-12-04 Thread quills
First question, what size paper is the document or PDF?

Second question, what size paper are you printing to?

If they are the same size, then you won't see the registration marks.

Scott

On 12/4/09 7:00 PM, Branam, Linda C wrote:

 I wanted registration marks to appear on my PDF version of the Frame doc, and 
 I specified them everywhere I could think of, but they aren't showing, even 
 though I made sure Western was selected in both the Print Book dialog and the 
 subdialog PDF Setup for Selected Files.

 Anyone have an idea what's going on?


 Thanks,
 Linda

 Linda Frost Branam
 Senior Technical Editor - Aesbus Knowledge Solutions
 HP Personal Systems Group--Notebooks
 Cell: 832-692-8326


 ___


 You are currently subscribed to Framers as qui...@airmail.net.

 Send list messages to fram...@lists.frameusers.com.

 To unsubscribe send a blank email to
 framers-unsubscr...@lists.frameusers.com
 or visit 
 http://lists.frameusers.com/mailman/options/framers/quills%40airmail.net

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.


___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Re: Missing registration marks

2009-12-04 Thread Writer
Hi, Linda:

A bit off topic, but if you can afford this book, I recommend that you 
buy it: 
http://store.scriptorium.com/items/books/publishing-fundamentals-unstructured-framemaker-8-all-detail.htm
 


When I started out with FM, I had a similar book (FM for Dummies) that 
was worth its weight in gold.

Cheers,

Nadine

 On 12/4/09 7:00 PM, Branam, Linda C wrote:
   
 I wanted registration marks to appear on my PDF version of the Frame doc, 
 and I specified them everywhere I could think of, but they aren't showing, 
 even though I made sure Western was selected in both the Print Book dialog 
 and the subdialog PDF Setup for Selected Files.

 Anyone have an idea what's going on?


 Thanks,
 Linda

 Linda Frost Branam
 Senior Technical Editor - Aesbus Knowledge Solutions
 HP Personal Systems Group--Notebooks
 Cell: 832-692-8326


 ___


 You are currently subscribed to Framers as qui...@airmail.net.

 Send list messages to fram...@lists.frameusers.com.

 To unsubscribe send a blank email to
 framers-unsubscr...@lists.frameusers.com
 or visit 
 http://lists.frameusers.com/mailman/options/framers/quills%40airmail.net

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.

 

 ___


 You are currently subscribed to Framers as generic...@yahoo.ca.

 Send list messages to fram...@lists.frameusers.com.

 To unsubscribe send a blank email to 
 framers-unsubscr...@lists.frameusers.com
 or visit 
 http://lists.frameusers.com/mailman/options/framers/generic668%40yahoo.ca

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.

   

___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Re: Missing registration marks

2009-12-04 Thread Mike Wickham
You have to set the paper size larger than the page size so that there is 
room to show the registration marks.


___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-04 Thread Branam, Linda C
Thanks to everyone who told me about the page size setting. I'll try that out. 


Thanks,
Linda 

-Original Message-
From: Mike Wickham [mailto:i...@mikewickham.com] 
Sent: Friday, December 04, 2009 7:41 PM
To: Branam, Linda C; Frame Users
Subject: Re: Missing registration marks 

You have to set the paper size larger than the page size so that there is room 
to show the registration marks.


___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


RE: Missing registration marks

2009-12-04 Thread Branam, Linda C
OK, I must not be doing something right. I bought and downloaded the Frame 7.0 
guide from Scriptorium (THANKS, Nadine!). I'm trying to follow the directions 
(which parallel the ones that the list gave me) but no luck.

I'm printing to letter size paper, so in the PDF Setup dialog box I set the 
page size at 5.827 by 8.268. Then in the Printer Setup dialog box for the 
Adobe PDF printer, I first selected Letter and printed. When that didn't work I 
tried again with A4. Still no luck.

Any suggestions?


Thanks,
Linda 

-Original Message-
From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Branam, Linda C
Sent: Friday, December 04, 2009 7:45 PM
To: Mike Wickham; Frame Users
Subject: RE: Missing registration marks 

Thanks to everyone who told me about the page size setting. I'll try that out. 


Thanks,
Linda 

-Original Message-
From: Mike Wickham [mailto:i...@mikewickham.com]
Sent: Friday, December 04, 2009 7:41 PM
To: Branam, Linda C; Frame Users
Subject: Re: Missing registration marks 

You have to set the paper size larger than the page size so that there is room 
to show the registration marks.


___


You are currently subscribed to Framers as bra...@hp.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit http://lists.frameusers.com/mailman/options/framers/branam%40hp.com

Send administrative questions to listad...@frameusers.com. Visit 
http://www.frameusers.com/ for more resources and info.
___


You are currently subscribed to Framers as arch...@mail-archive.com.

Send list messages to fram...@lists.frameusers.com.

To unsubscribe send a blank email to 
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


Missing registration marks

2009-12-04 Thread qui...@airmail.net
First question, what size paper is the document or PDF?

Second question, what size paper are you printing to?

If they are the same size, then you won't see the registration marks.

Scott

On 12/4/09 7:00 PM, Branam, Linda C wrote:
>
> I wanted registration marks to appear on my PDF version of the Frame doc, and 
> I specified them everywhere I could think of, but they aren't showing, even 
> though I made sure Western was selected in both the Print Book dialog and the 
> subdialog PDF Setup for Selected Files.
>
> Anyone have an idea what's going on?
>
>
> Thanks,
> Linda
>
> Linda Frost Branam
> Senior Technical Editor - Aesbus Knowledge Solutions
> HP Personal Systems Group--Notebooks
> Cell: 832-692-8326
>
>
> ___
>
>
> You are currently subscribed to Framers as quills at airmail.net.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/quills%40airmail.net
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>



Missing registration marks

2009-12-04 Thread Writer
Hi, Linda:

A bit off topic, but if you can afford this book, I recommend that you 
buy it: 
http://store.scriptorium.com/items/books/publishing-fundamentals-unstructured-framemaker-8-all-detail.htm
 


When I started out with FM, I had a similar book (FM for Dummies) that 
was worth its weight in gold.

Cheers,

Nadine
>
> On 12/4/09 7:00 PM, Branam, Linda C wrote:
>   
>> I wanted registration marks to appear on my PDF version of the Frame doc, 
>> and I specified them everywhere I could think of, but they aren't showing, 
>> even though I made sure Western was selected in both the Print Book dialog 
>> and the subdialog PDF Setup for Selected Files.
>>
>> Anyone have an idea what's going on?
>>
>>
>> Thanks,
>> Linda
>>
>> Linda Frost Branam
>> Senior Technical Editor - Aesbus Knowledge Solutions
>> HP Personal Systems Group--Notebooks
>> Cell: 832-692-8326
>>
>>
>> ___
>>
>>
>> You are currently subscribed to Framers as quills at airmail.net.
>>
>> Send list messages to framers at lists.frameusers.com.
>>
>> To unsubscribe send a blank email to
>> framers-unsubscribe at lists.frameusers.com
>> or visit 
>> http://lists.frameusers.com/mailman/options/framers/quills%40airmail.net
>>
>> Send administrative questions to listadmin at frameusers.com. Visit
>> http://www.frameusers.com/ for more resources and info.
>>
>> 
>
> ___
>
>
> You are currently subscribed to Framers as generic668 at yahoo.ca.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to 
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/generic668%40yahoo.ca
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>
>   



Missing registration marks

2009-12-04 Thread Mike Wickham
You have to set the paper size larger than the page size so that there is 
room to show the registration marks.