Re: [Framers] Reverse engineer Robohelp in to Framemaker?

2017-12-20 Thread Tammy Van Boening
Thank you!!!

Tammy Van Boening
Owner/Principal
Spectrum Writing, LLC
Tammy dot Vanboening at spectrumwritingllc.com
303-840-1755

-Original Message-
From: Framers
[mailto:framers-bounces+tammyvb=spectrumwritingllc@lists.frameusers.com]
On Behalf Of Robert Lauriston
Sent: Tuesday, December 19, 2017 6:38 PM
To: framers@lists.frameusers.com
Subject: Re: [Framers] Reverse engineer Robohelp in to Framemaker?

Have you linked FrameMaker projects to RoboHelp before? If not, and
FrameMaker's subset of RoboHelp features don't do the trick for you, my
cheat sheet might help make up for Adobe's weak documentation on the
subject.

http://lauriston.com/fm10_link_to_rh9.zip

On 12/18/17, Robert Lauriston <rob...@lauriston.com> wrote:
> You could output to Word and import that in FrameMaker.
>
> Or if you can get your hands on a copy of Flare, import the RoboHelp 
> projects and export them to FrameMaker.
>
> On 12/18/17, Tammy Van Boening <tamm...@spectrumwritingllc.com> wrote:
>> So, I have no idea if this is even possible/ever been tried, but for 
>> a variety of reasons that aren't important here, I have inherited a 
>> truckload of CHM projects done in Robohelp directly - not from Frame 
>> to RH. Is there anyway at all, whatsoever, to reverse engineer these 
>> and get them into FM, even w/ rudimentary formatting and I could take 
>> it from there?
>
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com Visit the list's homepage at
http://www.frameusers.com Archives located at
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com


Re: [Framers] Reverse engineer Robohelp in to Framemaker?

2017-12-19 Thread Robert Lauriston
Have you linked FrameMaker projects to RoboHelp before? If not, and
FrameMaker's subset of RoboHelp features don't do the trick for you,
my cheat sheet might help make up for Adobe's weak documentation on
the subject.

http://lauriston.com/fm10_link_to_rh9.zip

On 12/18/17, Robert Lauriston  wrote:
> You could output to Word and import that in FrameMaker.
>
> Or if you can get your hands on a copy of Flare, import the RoboHelp
> projects and export them to FrameMaker.
>
> On 12/18/17, Tammy Van Boening  wrote:
>> So, I have no idea if this is even possible/ever been tried, but for a
>> variety of reasons that aren't important here, I have inherited a
>> truckload
>> of CHM projects done in Robohelp directly - not from Frame to RH. Is
>> there
>> anyway at all, whatsoever, to reverse engineer these and get them into
>> FM,
>> even w/ rudimentary formatting and I could take it from there?
>
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com


Re: [Framers] Reverse engineer Robohelp in to Framemaker?

2017-12-18 Thread tammyvb
Actually no I can actually get my hands on the robohelp projects themselves so 
any tips would be appreciated thank yoy.


Sent from Samsung Galaxy smartphone.Pardon the typos!
 Original message From: Jeff Coatsworth 
<jeff.coatswo...@jonasclub.com> Date: 12/18/17  1:47 PM  (GMT-07:00) To: "An 
email list for people using Adobe FrameMaker software." 
<framers@lists.frameusers.com> Subject: Re: [Framers] Reverse engineer Robohelp 
in to Framemaker? 
Sounds like Tammy's just got the CHMs (no RH projects) - maybe use the old MS 
Help Compiler to deconstruct the CHM back into individual HTMs? 

-Original Message-
From: Framers 
[mailto:framers-bounces+jeff.coatsworth=jonasclub@lists.frameusers.com] On 
Behalf Of Robert Lauriston
Sent: Monday, December 18, 2017 3:42 PM
To: An email list for people using Adobe FrameMaker software. 
<framers@lists.frameusers.com>
Subject: Re: [Framers] Reverse engineer Robohelp in to Framemaker?

You could output to Word and import that in FrameMaker.

Or if you can get your hands on a copy of Flare, import the RoboHelp projects 
and export them to FrameMaker.

On 12/18/17, Tammy Van Boening <tamm...@spectrumwritingllc.com> wrote:
> OK,
>
>
>
> So, I have no idea if this is even possible/ever been tried, but for a 
> variety of reasons that aren't important here, I have inherited a 
> truckload of CHM projects done in Robohelp directly - not from Frame 
> to RH. Is there anyway at all, whatsoever, to reverse engineer these 
> and get them into FM, even w/ rudimentary formatting and I could take it from 
> there?
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com Visit the list's homepage at  
http://www.frameusers.com Archives located at 
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

Re: [Framers] Reverse engineer Robohelp in to Framemaker?

2017-12-18 Thread Jeff Coatsworth
Sounds like Tammy's just got the CHMs (no RH projects) - maybe use the old MS 
Help Compiler to deconstruct the CHM back into individual HTMs? 

-Original Message-
From: Framers 
[mailto:framers-bounces+jeff.coatsworth=jonasclub@lists.frameusers.com] On 
Behalf Of Robert Lauriston
Sent: Monday, December 18, 2017 3:42 PM
To: An email list for people using Adobe FrameMaker software. 
<framers@lists.frameusers.com>
Subject: Re: [Framers] Reverse engineer Robohelp in to Framemaker?

You could output to Word and import that in FrameMaker.

Or if you can get your hands on a copy of Flare, import the RoboHelp projects 
and export them to FrameMaker.

On 12/18/17, Tammy Van Boening <tamm...@spectrumwritingllc.com> wrote:
> OK,
>
>
>
> So, I have no idea if this is even possible/ever been tried, but for a 
> variety of reasons that aren't important here, I have inherited a 
> truckload of CHM projects done in Robohelp directly - not from Frame 
> to RH. Is there anyway at all, whatsoever, to reverse engineer these 
> and get them into FM, even w/ rudimentary formatting and I could take it from 
> there?
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com Visit the list's homepage at  
http://www.frameusers.com Archives located at 
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com


Re: [Framers] Reverse engineer Robohelp in to Framemaker?

2017-12-18 Thread Robert Lauriston
You could output to Word and import that in FrameMaker.

Or if you can get your hands on a copy of Flare, import the RoboHelp
projects and export them to FrameMaker.

On 12/18/17, Tammy Van Boening  wrote:
> OK,
>
>
>
> So, I have no idea if this is even possible/ever been tried, but for a
> variety of reasons that aren't important here, I have inherited a truckload
> of CHM projects done in Robohelp directly - not from Frame to RH. Is there
> anyway at all, whatsoever, to reverse engineer these and get them into FM,
> even w/ rudimentary formatting and I could take it from there?
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com


Re: [Framers] Reverse engineer Robohelp in to Framemaker?

2017-12-18 Thread Roberta Hennessey
I am interested in this one as well, I have an old RoboHelp project that
does not work well, and I write in Oxygen.
(Though I like FrameMaker much better.)

On Mon, Dec 18, 2017 at 1:55 PM, Tammy Van Boening <
tamm...@spectrumwritingllc.com> wrote:

> OK,
>
>
>
> So, I have no idea if this is even possible/ever been tried, but for a
> variety of reasons that aren't important here, I have inherited a truckload
> of CHM projects done in Robohelp directly - not from Frame to RH. Is there
> anyway at all, whatsoever, to reverse engineer these and get them into FM,
> even w/ rudimentary formatting and I could take it from there?
>
>
>
> TIA,
>
>
>
> TVB
>
>
>
>
>
>
>
> Tammy Van Boening
>
> Owner/Principal
>
> Spectrum Writing, LLC
>
> Tammy dot Vanboening at spectrumwritingllc.com
>
> 303-840-1755
>
>
>
> ___
>
> This message is from the Framers mailing list
>
> Send messages to framers@lists.frameusers.com
> Visit the list's homepage at  http://www.frameusers.com
> Archives located at http://www.mail-archive.com/
> framers%40lists.frameusers.com/
> Subscribe and unsubscribe at http://lists.frameusers.com/
> listinfo.cgi/framers-frameusers.com
> Send administrative questions to listad...@frameusers.com
>
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com