Hello All,
I just bought a moviola optical sound head, and I think I've realized that I
need another component to make it functional. Evidently there is a four prong
cord that comes off of it that plugs into a small speaker box. From what I've
read it sends audio signals while receiving power s
I think you are talking about the squawk box.
Michael Bouquard
bouqu...@aol.com
-Original Message-
From: Mike Morris
To: frameworks
Sent: Thu, Jul 12, 2012 12:53 pm
Subject: [Frameworks] Moviola Optical sound head
Hello All,
I just bought a moviola optical sound head, and I th
Mike,
You can find piles of these on eBay squawk box as someone mentioned.
Or ask SMU or some of the other Dallas schools if they have one. I'm sure
they have a room full of them.
Alain
On Thu, Jul 12, 2012 at 9:53 AM, Mike Morris wrote:
> Hello All,
>
> I just bought a moviola optical s
This is called a "squawk box" and you can see them on Ebay now and then
for very little. Lots of companies made them, yours will work with any
of them pretty much. All of the actual electronics are in the box, the
head is just a coil of wire around a piece of steel and some stuff to
hold it in pl
Hello everyone.
We have diverged the UltraPan8 system into two systems.
The initial prototype using the full 16mm width of Regular film stock
with 8mm pulldown shall be referred to as UltraPan8 2.8 which now
includes the specific aspect ratio (2.8) as per the nomenclature. The
new variation shall
Hi Frameworkers,
I'm selling off 5 unopened 400ft rolls of 16mm Kodak 7285
(Ektachrome 100D) for $100 each. These rolls are about 2/3 years old
and were stored in a freezer/refrigerator for most of the time, minus
a short period where they lived in a cool drawer in my San Francisco
apartment. I
The OP specified an optical head - most of the squawks I see are for
multitack mag. and these won't work with an optical head as they just have
1/4" phone jacks for mag. heads. I think the moviola squawk for optical
was the URS... Sorry I don't have any links handy, but make sure you're
getting one
hey folks!
trying to export an EDL for a pal project (I'm using media composer 3.0) & the
EDL defaults to NTSC, apparently this is an avid bug & the solution is to
install EDL manager 22.2.1 (http://community.avid.com/forums/t/44115.aspx)
having trouble finding that version to download (couldn't