[FUG-BR] Testar RAID 1 no FreebSD 7
Tenho 2 IBM 3550 com FreeBSD 7.1 + carp + pfsync. Ambos possuem RAID 1 por hardware com 2 discos SAS. acd0: CDRW HL-DT-STCD-RW/DVD DRIVE GCC-T10N/1.00 at ata0-master UDMA33 aacd0: RAID 1 (Mirror) on aac0 aacd0: 152490MB (312299520 sectors) EU preciso testar se o RAID esta Ok. Não achei muita documentação na net sobre isso. Alguem pode me ajudar? Ontem eu tirei um dos HDs com a maquina ligada e coloquei novamente. O consumo de CPU da maquina não mudou. A luz do disco começou a piscar, parecia que esta fazendo um rebuild. Quais testes me sugerem fazer para verificar esta pendência. Dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p3 #1: Thu Apr 16 19:27:25 BRT 2009 rica...@trinity.cmtsp.com.br:/usr/obj/usr/src/sys/CMT Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (1995.01-MHz 686-class CPU) Origin = GenuineIntel Id = 0x10676 Stepping = 6 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0xce33dSSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1 AMD Features=0x2000LM AMD Features2=0x1LAHF Cores per package: 4 real memory = 2147250176 (2047 MB) avail memory = 2091597824 (1994 MB) ACPI APIC Table: IBMSERDEFNT FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 Version 2.0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: IBM SERDEFNT on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x588-0x58b on acpi0 acpi_hpet0: High Precision Event Timer iomem 0xfed0-0xfed003ff on acpi0 Timecounter HPET frequency 14318180 Hz quality 900 pcib0: ACPI Host-PCI bridge on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 2.0 on pci0 pci16: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci16 pci17: ACPI PCI bus on pcib2 pcib3: ACPI PCI-PCI bridge at device 0.0 on pci17 pci19: ACPI PCI bus on pcib3 pcib4: ACPI PCI-PCI bridge at device 1.0 on pci17 pci18: ACPI PCI bus on pcib4 pcib5: ACPI PCI-PCI bridge at device 0.3 on pci16 pci20: ACPI PCI bus on pcib5 pcib6: PCI-PCI bridge at device 3.0 on pci0 pci35: PCI bus on pcib6 pcib7: ACPI PCI-PCI bridge at device 4.0 on pci0 pci7: ACPI PCI bus on pcib7 pcib8: ACPI PCI-PCI bridge at device 0.0 on pci7 pci8: ACPI PCI bus on pcib8 pcib9: PCI-PCI bridge at device 0.0 on pci8 pci9: PCI bus on pcib9 em0: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x6000-0x601f mem 0xc600-0xc601,0xc602-0xc603 irq 19 at device 0.0 on pci9 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:15:17:7b:be:f0 em1: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x6020-0x603f mem 0xc604-0xc605,0xc606-0xc607 irq 16 at device 0.1 on pci9 em1: Using MSI interrupt em1: [FILTER] em1: Ethernet address: 00:15:17:7b:be:f1 pcib10: PCI-PCI bridge at device 1.0 on pci8 pci10: PCI bus on pcib10 em2: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x5000-0x501f mem 0xc400-0xc401,0xc402-0xc403 irq 16 at device 0.0 on pci10 em2: Using MSI interrupt em2: [FILTER] em2: Ethernet address: 00:15:17:7b:be:f2 em3: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x5020-0x503f mem 0xc404-0xc405,0xc406-0xc407 irq 17 at device 0.1 on pci10 em3: Using MSI interrupt em3: [FILTER] em3: Ethernet address: 00:15:17:7b:be:f3 pcib11: PCI-PCI bridge at device 5.0 on pci0 pci34: PCI bus on pcib11 pcib12: ACPI PCI-PCI bridge at device 6.0 on pci0 pci3: ACPI PCI bus on pcib12 pcib13: PCI-PCI bridge at device 0.0 on pci3 pci4: PCI bus on pcib13 bce0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) mem 0xc800-0xc9ff irq 18 at device 0.0 on pci4 miibus0: MII bus on bce0 brgphy0: BCM5708C 10/100/1000baseTX PHY PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:1a:64:79:1d:c4 bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x04000305); Flags( MFW MSI ) pcib14: ACPI PCI-PCI bridge at device 7.0 on pci0 pci2: ACPI PCI bus on pcib14 aac0: IBM ServeRAID-8k port 0x4000-0x40ff mem 0xcce0-0xccff,0xcafe-0xcaff irq 17 at device 0.0 on pci2 aac0: Enable Raw I/O aac0: Enable 64-bit array aac0: New comm. interface enabled aac0: [ITHREAD] aac0: ServeRAID 8k-l , aac driver 2.0.0-1 pci0: base peripheral at device 8.0 (no driver attached) pcib15: ACPI PCI-PCI bridge irq 16 at device 28.0 on
Re: [FUG-BR] Testar RAID 1 no FreebSD 7
Em todas IBM 3550 e 3650 que temos, estamos usando o FreeBSD 7.0, pois em 3 casos, com o 7.1, tivemos travamos frequentes. Foi fazer downgrade p/ 7.0 e nunca mais travou. Sobre o RAID 1, quando vc tira o HD, na console mostra uma mensagem de erro na controladora. Quando coloca, mostra também mensagem de rebuild. Vai pro /var/log/messages, mas se digitar dmesg -a também mostra. []s, Ari 2009/5/7 Ricardo Augusto de Souza ricardo.so...@cmtsp.com.br Tenho 2 IBM 3550 com FreeBSD 7.1 + carp + pfsync. Ambos possuem RAID 1 por hardware com 2 discos SAS. acd0: CDRW HL-DT-STCD-RW/DVD DRIVE GCC-T10N/1.00 at ata0-master UDMA33 aacd0: RAID 1 (Mirror) on aac0 aacd0: 152490MB (312299520 sectors) EU preciso testar se o RAID esta Ok. Não achei muita documentação na net sobre isso. Alguem pode me ajudar? Ontem eu tirei um dos HDs com a maquina ligada e coloquei novamente. O consumo de CPU da maquina não mudou. A luz do disco começou a piscar, parecia que esta fazendo um rebuild. Quais testes me sugerem fazer para verificar esta pendência. Dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p3 #1: Thu Apr 16 19:27:25 BRT 2009 rica...@trinity.cmtsp.com.br:/usr/obj/usr/src/sys/CMT Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (1995.01-MHz 686-class CPU) Origin = GenuineIntel Id = 0x10676 Stepping = 6 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0xce33dSSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1 AMD Features=0x2000LM AMD Features2=0x1LAHF Cores per package: 4 real memory = 2147250176 (2047 MB) avail memory = 2091597824 (1994 MB) ACPI APIC Table: IBMSERDEFNT FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 Version 2.0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: IBM SERDEFNT on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x588-0x58b on acpi0 acpi_hpet0: High Precision Event Timer iomem 0xfed0-0xfed003ff on acpi0 Timecounter HPET frequency 14318180 Hz quality 900 pcib0: ACPI Host-PCI bridge on acpi0 pci0: ACPI PCI bus on pcib0 pcib1: ACPI PCI-PCI bridge at device 2.0 on pci0 pci16: ACPI PCI bus on pcib1 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci16 pci17: ACPI PCI bus on pcib2 pcib3: ACPI PCI-PCI bridge at device 0.0 on pci17 pci19: ACPI PCI bus on pcib3 pcib4: ACPI PCI-PCI bridge at device 1.0 on pci17 pci18: ACPI PCI bus on pcib4 pcib5: ACPI PCI-PCI bridge at device 0.3 on pci16 pci20: ACPI PCI bus on pcib5 pcib6: PCI-PCI bridge at device 3.0 on pci0 pci35: PCI bus on pcib6 pcib7: ACPI PCI-PCI bridge at device 4.0 on pci0 pci7: ACPI PCI bus on pcib7 pcib8: ACPI PCI-PCI bridge at device 0.0 on pci7 pci8: ACPI PCI bus on pcib8 pcib9: PCI-PCI bridge at device 0.0 on pci8 pci9: PCI bus on pcib9 em0: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x6000-0x601f mem 0xc600-0xc601,0xc602-0xc603 irq 19 at device 0.0 on pci9 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:15:17:7b:be:f0 em1: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x6020-0x603f mem 0xc604-0xc605,0xc606-0xc607 irq 16 at device 0.1 on pci9 em1: Using MSI interrupt em1: [FILTER] em1: Ethernet address: 00:15:17:7b:be:f1 pcib10: PCI-PCI bridge at device 1.0 on pci8 pci10: PCI bus on pcib10 em2: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x5000-0x501f mem 0xc400-0xc401,0xc402-0xc403 irq 16 at device 0.0 on pci10 em2: Using MSI interrupt em2: [FILTER] em2: Ethernet address: 00:15:17:7b:be:f2 em3: Intel(R) PRO/1000 Network Connection 6.9.6 port 0x5020-0x503f mem 0xc404-0xc405,0xc406-0xc407 irq 17 at device 0.1 on pci10 em3: Using MSI interrupt em3: [FILTER] em3: Ethernet address: 00:15:17:7b:be:f3 pcib11: PCI-PCI bridge at device 5.0 on pci0 pci34: PCI bus on pcib11 pcib12: ACPI PCI-PCI bridge at device 6.0 on pci0 pci3: ACPI PCI bus on pcib12 pcib13: PCI-PCI bridge at device 0.0 on pci3 pci4: PCI bus on pcib13 bce0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) mem 0xc800-0xc9ff irq 18 at device 0.0 on pci4 miibus0: MII bus on bce0 brgphy0: BCM5708C 10/100/1000baseTX PHY PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:1a:64:79:1d:c4 bce0: [ITHREAD]
Re: [FUG-BR] Testar RAID 1 no FreebSD 7
On Thu, May 7, 2009 20:12, Ari Arantes Filho wrote: Em todas IBM 3550 e 3650 que temos, estamos usando o FreeBSD 7.0, pois em 3 casos, com o 7.1, tivemos travamos frequentes. Foi fazer downgrade p/ 7.0 e nunca mais travou. Sobre o RAID 1, quando vc tira o HD, na console mostra uma mensagem de erro na controladora. Quando coloca, mostra também mensagem de rebuild. Vai pro /var/log/messages, mas se digitar dmesg -a também mostra. []s, Ari tb não sei se tem, mas se entendi ele quer pra FreeBSD algo como bioctl para OpenBSD :) matheus -- We will call you cygnus, The God of balance you shall be A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? http://en.wikipedia.org/wiki/Posting_style - Histórico: http://www.fug.com.br/historico/html/freebsd/ Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd