Hello I thought I would write and see if anyone had any suggestions on
this problem.. for the most part an S3 suspend works the way it should
with one problem.. the system will not resume keyboard input, either via
USB or PS/2 the keyboard gets power again and it responds to minor
things like numlock and cabs lock but the system does not register any
text input. I'm running Freebsd 9.1 release. I have included a dmesg and
can supply an acpidump in needed, if someone has any other suggestions I
would be happy to try anything thanks!
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0: Thu Jan 3 14:45:04 EST 2013
r...@idoru.ops.inoc.net:/usr/obj/usr/src/sys/IDORU amd64
CPU: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (2394.61-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model = 2a Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8186150912 (7806 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL CBX3 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ACPI Warning: 32/64X FACS address mismatch in FADT -
0xCF7E4E40/0x00000000CF7E4D40, using 32 (20110527/tbfadt-517)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <DELL CBX3 > on motherboard
acpi0: Power Button (fixed)
can't fetch resources for \\_SB_.MEM2 - AE_AML_INVALID_RESOURCE_TYPE
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem
0xe3000000-0xe3ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at
device 0.0 on pci1
nvidia0: <NVS 4200M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <NVIDIA GF119 HDA Controller> mem 0xe4080000-0xe4083fff irq 17 at device
0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x4040-0x405f mem
0xe4d00000-0xe4d1ffff,0xe4d80000-0xe4d80fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: d4:be:d9:07:a5:93
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe4d70000-0xe4d703ff irq 16 at
device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac1: <Intel Cougar Point HDA Controller> mem 0xe4d60000-0xe4d63fff irq 22 at
device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
iwn0: <Intel Centrino Advanced-N 6205> mem 0xe4c00000-0xe4c01fff irq 17 at
device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <base peripheral, SD host controller> at device 0.0 (no driver attached)
pci5: <mass storage> at device 0.1 (no driver attached)
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe4d50000-0xe4d503ff irq 17 at
device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port
0x4090-0x4097,0x4080-0x4083,0x4070-0x4077,0x4060-0x4063,0x4020-0x403f mem
0xe4d40000-0xe4d407ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
battery2: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37b irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 6 on hdaa0
hdacc1: <IDT 92HD90BXX HDA CODEC> at cad 0 on hdac1
hdaa1: <IDT 92HD90BXX Audio Function Group> at nid 1 on hdacc1
pcm2: <IDT 92HD90BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 10,15 on hdaa1
pcm3: <IDT 92HD90BXX (Analog)> at nid 14 and 17 on hdaa1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ACPI Error: [EABF] Namespace lookup failure, AE_ALREADY_EXISTS
(20110527/dswload2-327)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog
(20110527/psloop-254)
ACPI Error: Method parse/execution failed [\\_SB_.EEAC] (Node
0xfffffe00054e9880), AE_ALREADY_EXISTS (20110527/psparse-560)
ACPI Error: Method parse/execution failed [\\_SB_.BAT2._STA] (Node
0xfffffe00054e8d00), AE_ALREADY_EXISTS (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.BAT2._STA] (Node
0xfffffe00054e8d00), AE_ALREADY_EXISTS (20110527/uteval-113)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <vendor 0x413c> at usbus0
uhub4: <vendor 0x413c product 0x2513, class 9/0, rev 2.00/a0.05, addr 3> on
usbus0
uhub4: MTT enabled
ugen1.3: <Broadcom Corp> at usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST320LT009-9WC142 1002DEMA> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-U633J D800> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 9353956 Hz quality 1000
uhub4: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <vendor 0x413c> at usbus0
uhub5: <vendor 0x413c product 0x2513, class 9/0, rev 2.00/a0.05, addr 4> on
usbus0
uhub5: MTT enabled
uhub5: 3 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.5: <vendor 0x0409> at usbus0
uhub6: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 5> on
usbus0
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0
ugen0.6: <vendor 0x0424> at usbus0
uhub7: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 6> on
usbus0
uhub7: MTT enabled
uhub7: 4 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.7: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 7> on usbus0
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 7> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 7> on usbus0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
vboxdrv: fAsync=0 offMin=0x218 offMax=0x2108
wlan0: Ethernet address: 08:11:96:ee:28:fc
_______________________________________________
freebsd-acpi@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"
