Re: HEADSUP: pca driver being retired.

2003-08-22 Thread Riccardo Torrini
On Wed, Aug 13, 2003 at 11:02:23AM +0200, Poul-Henning Kamp wrote: I plan to remove the pca driver in about a week. Protest only from actual users respected. Not really 'actual', only 'old'. A lot of time ago I sent a message about lost speaker (IIRC) because having both devive in the kernel

newsyslog problems with -C

2003-08-01 Thread Riccardo Torrini
I have created a private newsyslog.conf with this contents: -8- /var/tmp/foofoo:mail600 7 * @T00ZBCN /var/tmp/barbar:mail600 7 * @T00ZBCN -8- Without creating by hand /var/tmp/{foo,bar} this command fail leaving the

Re: newsyslog problems with -C

2003-08-01 Thread Riccardo Torrini
On Sat, Aug 02, 2003 at 02:03:32AM +0200, Riccardo Torrini wrote: Without creating by hand /var/tmp/{foo,bar} this command fail # newsyslog -v -F -C -f /usr/local/etc/rotatemailbackup.conf -- [creating entry for /var/tmp/foo] -- [creating entry for /var/tmp/bar] /var/tmp

Re: ReiserFS

2003-06-24 Thread Riccardo Torrini
On Sun, Jun 22, 2003 at 07:00:26PM +0200, Brad Knowles wrote: What if it's the same machine? What if they have only the one machine, so they can't even copy it over to another one, just to copy it back? What about using a FAT32 exchange partition? On the same disk or on a new one,

Re: Info please...xsession

2003-03-20 Thread Riccardo Torrini
On Thu, Mar 20, 2003 at 09:28:25AM +0100, CARTER Anthony wrote: Can someone give me their permissions on a users .xsession-errors file? -rw--- {me} {mygroup} Doesn't this above file get created automatically if it is deleted? Yes. At least here ;) FYI: I still using XFree86-4.2.1

Re: FreeBSD/i386 kern.flp flooding again

2003-02-17 Thread Riccardo Torrini
On Sun, Feb 16, 2003 at 09:03:59PM +0900, Makoto Matsushita wrote: If you are serious about this, attached below is a current kernel configuration file for kern.flp kernel named BOOTMFS (attention: it is only just for boot floppy, not GENERIC nor default installed kernel). machine i386

calendar(1) badly crashes

2003-01-21 Thread Riccardo Torrini
I (by mistake) passed a directory instead of a file to calendar(1): # uname -v FreeBSD 5.0-CURRENT #52: Sat Jan 18 00:40:27 CET 2003 ... # calendar -f /some.missing.file.or.dir calendar: no calendar file: ``/some.missing.file.or.dir'' # calendar -f /etc cpp: Internal error: Segmentation fault

Re: unrar doesn't work under current

2002-12-18 Thread Riccardo Torrini
On 18-Dec-2002 (07:33:03/GMT) Kris Kennaway wrote: But what about rar/unrar ports that overwrite one each other? I don't know what you mean here. Try to install /usr/ports/archivers/{rar,unrar} in any order... And then (or even better, before then) look at installed files: # cd

Re: unrar doesn't work under current

2002-12-17 Thread Riccardo Torrini
On 18-Dec-2002 (06:52:54/GMT) Kris Kennaway wrote: This is due to lack of rpc.lockd running on the nfs client and/or server. Yes, I tryed on a nfs mounted dir from my -CURRENT home machine. This means that this is a pilot error? Again? :-( I'm sorry. I think that I must sleep a little

unrar doesn't work under current

2002-12-16 Thread Riccardo Torrini
Trying to extract a single or multi volume archive doesn't work. Same archive can be extracted fine with unrar under 4.7-STABLE. My -CURRENT from 10 day ago. Tryed to remove and rebuild unrar without luck. rar on -CURRENT also works. Any idea? -8-[ from 4.7-STABLE ]-8- # date

The great perl script rewrite - big problem

2002-12-08 Thread Riccardo Torrini
I contributed to the great perl script rewrite but seems that we forgot to rewrite some important perl script: # grep -lR perl /etc/periodic/ /etc/periodic/daily/440.status-mailq /etc/periodic/daily/460.status-mail-rejects /etc/periodic/daily/470.status-named /etc/periodic/security/550.ipfwlimit

Re: The great perl script rewrite - big problem

2002-12-08 Thread Riccardo Torrini
On 08-Dec-2002 (17:07:02/GMT) Christian Brueffer wrote: this has already been taken care of: keramida2002/12/07 15:37:45 PST Log: Avoid using perl in the periodic security scripts. This brings the base system one step closer to being totally perl-free. And me one step back :-(

Re: The great perl script rewrite - big problem

2002-12-08 Thread Riccardo Torrini
On 08-Dec-2002 (17:54:49/GMT) Mark Murray wrote: The Perl rewrite does not affect 4.x, only 5.x. Yes, I know, but I think would be usefull remove it also from 4.x, at least for small job (perl script inline, as in periodic). Because FreeBSD.org use postfix I think it already resolved this

Re: Trivial patch: fdisk doesn't recognize my partitions

2002-12-01 Thread Riccardo Torrini
On 01-Dec-2002 (23:46:00/GMT) Terry Lambert wrote: WHY ARE WE NOT RESPECTING THE DECISION TO HIDE THE THINGS? A user installed the software doing the hiding on purpose. The software changed the ID hide it, on purpose. Windows ignores these partitions -- on purpose. I'm really sorry for

Re: Trivial patch: fdisk doesn't recognize my partitions

2002-11-28 Thread Riccardo Torrini
On 29-Nov-2002 (01:34:27/GMT) Bruce Evans wrote: RT I have 4 primary partitions and I use a boot manager (magic.com) [...] RT As far as I know it use an EXOR 0x10 to hide/unhide but fdisk RT doesn't recognize 0x0B/0x0C fat32 when hidden (0x1B/0x1C) PHK I think this is very marginal use really...

Re: Run two copies of named from rc.conf?

2002-11-19 Thread Riccardo Torrini
On 19-Nov-2002 (04:06:22/GMT) John De Boskey wrote: I need to kick off 2 name servers. The first is authoritive for the domain as seen externally and the 2nd which is authoritive for the internal network. I have only one named running, SOA for torrini.org for external and internal host and

RE: anybody help? undefined reference to 'xstrtod' occuring

2002-10-15 Thread Riccardo Torrini
On 14-Oct-2002 (18:10:16/GMT) David Francheski wrote: I'm trying to upgrade from a 5.0 DP1 system to the latest -current (as of last week sometime). I recently asked a similar question: upgrade from a too old -CURRENT (May 15) to a recent one. The solution was some small intermediate update,

RE: tcsh hang in -current (kse bug?)

2002-10-06 Thread Riccardo Torrini
On 06-Oct-2002 (23:10:55/GMT) Kris Kennaway wrote: Can anyone else reproduce this in tcsh? rpcgen -s `perl -e 'print ax5'` Word too long. Mee too mail. Using {50,500,5000} works, hang only with 5 (not tested with others numbers). Doing: # echo {your_command} print only word too

Access to ide cdrom/cd writer bugged?

2002-09-20 Thread Riccardo Torrini
I'm trying to understand why when accessing file to cdrom their contents change every time (in case of big file, at least). I usally backup some stuff (mail, sources, scanned images) and add to cdrom a files.md5 with the md5 keys of all files. (yes, I'm a bit paranoid :-) With my last system

It works ! (was Re: Unable to buildworld (new record, 18))

2002-09-10 Thread Riccardo Torrini
On 08-Sep-2002 (19:54:17/GMT) Riccardo Torrini wrote: There have been at least two gcc upgrades since then. I believe the easiest way to upgrade to today's -current would be to install a fairly recent snapshot ... instead of trying to debug ... I have tryed with a middle version (1 jul

Re: Unable to buildworld (new record, 18)

2002-09-08 Thread Riccardo Torrini
On 07-Sep-2002 (21:55:22/GMT) Giorgos Keramidas wrote: /usr/include/sys/_types.h:71: declaration does not declare anything *** Error code 1 Which revision of /usr/include/sys/_types.h do you have? # ident /usr/include/sys/_types.h /usr/include/sys/_types.h: $FreeBSD:

Re: Unable to buildworld (new record, 18)

2002-09-08 Thread Riccardo Torrini
On 08-Sep-2002 (13:56:34/GMT) Giorgos Keramidas wrote: There have been at least two gcc upgrades since then. I believe the easiest way to upgrade to today's -current would be to install a fairly recent snapshot from http://snapshots.jp.FreeBSD.org/ instead of trying to debug the many ways

Re: Unable to buildworld (new record, 18)

2002-09-07 Thread Riccardo Torrini
On 07-Sep-2002 (20:22:42/GMT) Kris Kennaway wrote: My -CURRENT is pre-gcc_3.1, running very fine from early May. I'm in between some big update? Where I'm wrong? Have you read through UPDATING? Yes, more and more, after every cvsup. I added -DNO_WERROR without luck, I also found two PR

Re: Unable to buildworld (new record, 18)

2002-09-07 Thread Riccardo Torrini
On 07-Sep-2002 (21:00:28/GMT) Riccardo Torrini wrote: Have you read through UPDATING? Yes, more and more ... I added -DNO_WERROR without luck I also found two PR speaking about wchar_t (31864 and 40084). I'm about to remove contrib/gcc tree and cvsuping again... No, same error :( Any

Re: CAM-ATAPI status?

2002-08-13 Thread Riccardo Torrini
On 13-Aug-2002 (00:27:51/GMT) Nate Lawson wrote: You'll be happy to tell them sys/dev/ata/atapi-cam.c: WOW ! Fri Aug 9 20:51:53 2002 UTC (3 days, 3 hours ago) by sos Add the ability to use ATAPI devices via CAM. I'm back from holidays and I'm still reading over 1200 old messages of

Re: cvs commit: src/sys/kern kern_sig.c (fwd)

2002-08-13 Thread Riccardo Torrini
On 13-Aug-2002 (13:59:39/GMT) Tim Robbins wrote: What about chpass, vipw, and the other pw_edit() consumers? vipw works correctly wrt suspending with ^Z on 4.6-RELEASE, but does not on -CURRENT. vipw works _perfectly_ here, on a not-too-current -CURRENT, from tcsh I can suspend (^Z), list

Re: cvs commit: src/sys/kern kern_sig.c (fwd)

2002-08-13 Thread Riccardo Torrini
On 13-Aug-2002 (15:06:48/GMT) Riccardo Torrini wrote: ...important data are on NFS -CURRENT server... No, I means -STABLE server (obvious :) Riccardo. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: custom kernel

2002-06-25 Thread Riccardo Torrini
On 24-Jun-2002 (11:36:34/GMT) Makoto Matsushita wrote: The only (I think) user configurable file under /usr/src tree is the custom kernel file, pointed by KERNCONF in /etc/make.conf. cd /usr/src; make {build,install}kernel with KERNCONF=YOUR_KERNEL_CFG

custom kernel

2002-06-24 Thread Riccardo Torrini
The only (I think) user configurable file under /usr/src tree is the custom kernel file, pointed by KERNCONF in /etc/make.conf. To avoid unwanted removal can we locate that file under any other place and point it (also by KERNCONF or some new black magic) with full path? Is this possible (or

Re: Floppy only 8.3 filenames

2002-06-23 Thread Riccardo Torrini
On 23-Jun-2002 (05:36:10/GMT) Bruce Evans wrote: msdos doesn't exist in -current (it has been renamed to msdosfs)... Aarrgghh! When it happens? I'm sure to miss something but here mount_msdos works (and in my /etc/fstab I have msdos not msdosfs). Is a manual removal required or would be done

usbd.core

2002-06-09 Thread Riccardo Torrini
This block crashes usbd with: ...(usbd), uid 0: exited on signal 11 (core dumped) I have a pre-GCC_3.1: (FreeBSD 5.0-CURRENT #34: Wed May 8 02:31:46 CEST 2002) -8-[ /etc/usbd.conf ]-8- device Scanner Epson Perfection 1240U (photo) # Perfection1240(0x010b),

I need USB and DEVFS info

2002-06-09 Thread Riccardo Torrini
I have a USB scanner (Epson Perfection 1240U) and a digital camera (Agfa CL18). The first is identified as uscanner0 and work really well, the second show up as ugen{0,0.1,0.2,0.3} With -CURRENT and DEVFS both come up with read/write enable only for root, so I added this line for scanner to

sendmail

2002-06-09 Thread Riccardo Torrini
I'm unable to hide: X-Authentication-Warning: ...goofy set sender to foobar using -f neither using this m4 macros: define(`confTRUSTED_USERS', ``goofy'') FEATURE(`use_ct_file') nor editing sendmail.cf adding T class. Tgoofy I'm using sendmail 8.12.3 on 4.6-PRERELEASE and 5.0-CURRENT

Add a Makefile.user on /usr/src and /usr/ports

2002-06-06 Thread Riccardo Torrini
To support fancy user and they own targets would be nice an infrastructure that check and (if it exist) include a file (named Makefile.user or .local or similar) with personal targets either under /usr/src than /usr/ports. This can save a lot of typing building various things (for example timing

RE: Please test PAUSE on non-Intel processors

2002-05-24 Thread Riccardo Torrini
On 24-May-2002 (14:25:53/GMT) John Baldwin wrote: Please compile the attached test program and run it... FreeBSD 5.0-CURRENT #34: Wed May 8 02:31:46 CEST 2002 CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) Origin = GenuineIntel Id = 0x672 Stepping = 2

RE: Any matrox users?

2002-05-23 Thread Riccardo Torrini
On 24-May-2002 (04:12:16/GMT) Seth Hettich wrote: I'd be interested to know if any other -current users with a G200 AGP are having problems. Only many months ago, when running moused before starting X (either from xdm/wdm or startx) forced mouse pointer in the upper right corner. But not

tcsh

2002-05-19 Thread Riccardo Torrini
If exists a directory named sort tcsh chdir to that dir instead of executing sort present in path (and no, I have no . anywere in path) # pwd /usr/src/contrib # find . -name Makefile | sort # pwd /usr/src/contrib/sort # cd .. # find . -name Makefile | /usr/bin/sort ./bind/Makefile

Re: tcsh

2002-05-19 Thread Riccardo Torrini
On 19-May-2002 (18:12:00/GMT) Mark Peek wrote: If exists a directory named sort tcsh chdir to that dir instead of executing sort present in path (and no, I have no . anywere in path) And it also happen with non existent commands: # pwd /usr/src/contrib # find . -name Makefile | libreadline #

Re: tcsh

2002-05-19 Thread Riccardo Torrini
On 19-May-2002 (18:27:40/GMT) Riccardo Torrini wrote: I have set implicitcd. But it would be honoured only when a directory is specified on a line itself, not after a pipe (IMHO). Or (even better), when a directory is followed by a / ? Riccardo. To Unsubscribe: send mail to [EMAIL

/usr/ports/emulators/bochs on -CURRENT

2002-05-16 Thread Riccardo Torrini
# grep BOCHS /etc/make.conf WITH_BOCHS_CPU_LEVEL= 6 WITH_BOCHS_PROCESSORS= 1 # uname -v FreeBSD 5.0-CURRENT #34: Wed May 8 02:31:46 CEST 2002 [...] # cd /usr/ports/emulators/bochs make [...] gmake[1]: Entering directory `/usr/ports/emulators/bochs/work/bochs-1.4/iodev' [...] c++ -c -O2

Re: make includes

2002-05-14 Thread Riccardo Torrini
On 14-May-2002 (06:21:18/GMT) Ruslan Ermilov wrote: I'm still unsure about the name; I'd have liked to rename it to includesinstall but that is too long. U, buildworld, installworld, buildkernel, installkernel... It would be: buildinclude{s}, installinclude{s} just to be simmetric :) And

Who broke 'make clean' for ports ?

2002-05-10 Thread Riccardo Torrini
After a cvsup of 10 minutes ago either on 5.0-CURRENT and on 4.6-PRERELEASE (both of May 8, 02:46 CEST) making a # make clean into /usr/ports/deve/gettext spawn zillions(!) of make process, lead to cpu load average at 96.xx before a reboot :-( Up to yesterday it works. Doing this into others

RE: Who broke 'make clean' for ports ?

2002-05-10 Thread Riccardo Torrini
On 10-May-2002 (17:01:26/GMT) Riccardo Torrini wrote: into /usr/ports/deve/gettext s/deve/devel/ I use make clean to show dependencies before install/update. No, I don't use neither pkg_update nor portupgrade. Riccardo. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe

Re: Who broke 'make clean' for ports ?

2002-05-10 Thread Riccardo Torrini
On 10-May-2002 (17:26:56/GMT) Dan Nelson wrote: After a cvsup of 10 minutes ago either on 5.0-CURRENT and on 4.6-PRERELEASE (both of May 8, 02:46 CEST) making a # make clean into /usr/ports/deve/gettext spawn zillions(!) of make process, lead to cpu load average at 96.xx before a reboot

Re: Who broke 'make clean' for ports ?

2002-05-10 Thread Riccardo Torrini
On 10-May-2002 (17:31:32/GMT) Garrett Rooney wrote: there's a circular dependency that was just introduced to gettext. gettext now depends on expat, which depends on gmake, which depends on gettext. it's a known problem, and is being worked on. Ok, thanks. Sorry for alarm but I don't see

Re: Who broke 'make clean' for ports ?

2002-05-10 Thread Riccardo Torrini
On 10-May-2002 (17:44:21/GMT) Garrett Rooney wrote: Ok, thanks. Sorry for alarm but I don't see any message before my own. Can I back-cvsup to a stable date? When (sh)it happens? the change is just a few hours old. you can just remove expat2 from the LIB_DEPENDS in

Re: Perl scripts that need rewiting - Any volunteers?

2002-05-09 Thread Riccardo Torrini
On 09-May-2002 (15:38:45/GMT) Mark Murray wrote: I tryed this one. I'm not a committer, just a volunteer :-) You're on! Please put appropriate (c) on this (Preferably 2-clause BSD license) and I'll commit it for you :-) Ahemm, I'm not sure to have done correct job. Please review last

RE: Status of USB subsystem.

2002-05-03 Thread Riccardo Torrini
On 03-May-2002 (13:22:48/GMT) Josef Karthauser wrote: If anyone has any others that they've not revealed I'd like to know please. I don't really know if is related, but gphoto2 doesn't work with my camera because of different linux-freebsd usb channel usage (i think). Also, if anyone

Re: truss

2002-04-28 Thread Riccardo Torrini
On 28-Apr-2002 (17:56:47/GMT) Harti Brandt wrote: RAOn a fresh current i get this RA# truss /bin/echo hello RAtruss: cannot open /proc/13245/mem: No such file or directory RAtruss: cannot open /proc/curproc/mem: No such file or directory You need to mount procfs. Mee too message. I

Bochs panic on current

2002-04-28 Thread Riccardo Torrini
I asked for same problem some time ago to this list and to ports without answer, anyone out there running bochs on current? I have installed bochs from ports but I was unable to start any sample image from support site, all fails with same error: Event type: PANIC Device: [APIC0] Message:

Unable to start bochs

2002-04-13 Thread Riccardo Torrini
I'm trying to run bochs without success. I'd like to know if is a -CURRENT or -PORTS issue. I have an Asus P2B-DS with dual pIII/500. Is crash related? # bochs [...] Event type: PANIC Device: [APIC0] Message: [APIC0] failed assertion irr[vector] == 1 at apic.cc:573 Riccardo. dmesg.gz

Please HELP with Zyxel Prestige P641 (router adsl)

2002-04-01 Thread Riccardo Torrini
Please, I need some help, my adsl access router (Zyxel Prestige P641) blow up last night (really exploded). A sourface mounted capacitor CP53 exploded destroying mother board. I need a zoomed scan of that area or even better of schematics of power section of the router, to try to adjust myself.

XFree86 4.2.0 with G200 fail to start with signal 10

2002-03-20 Thread Riccardo Torrini
With last update of world and ports I'm unable to start XFree86. I have a matrox G200 (agp) and I have tryed with and without the WITH_MATROX_GXX_DRIVER=yes but I got only a signal 10, core dump when starting X. At the same time I switched my MoBo from tyan trinity with k6 to a asus p2b-ds dual

automatic reboot without panic writing to local fat32 fs

2002-03-12 Thread Riccardo Torrini
Copying remote files (large backup, 200/300Megs) from my home file server (4.5-STABLE) using nfs or ftp or scp to a local msdos fat32 partition reboot machine without any error :-( Yes, local machine that has msdos mounted fs is -CURRENT: # uname -v FreeBSD 5.0-CURRENT #22: Tue Mar 5 20:50:06

Re: 5.0-CURRENT makebuild world fails

2002-03-03 Thread Riccardo Torrini
On 03-Mar-2002 (08:20:46/GMT) Thierry Herbelot wrote: cc: Internal compiler error: program cc1 got fatal signal 11 a signal 11 is generally linked to bad memory chips ...and/or overclocked CPU :) Riccardo. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in

RE: devfs(5) Permissions

2002-03-03 Thread Riccardo Torrini
On 03-Mar-2002 (16:31:36/GMT) Crist J. Clark wrote: How does one change the permissions on dynamically created devices? That is, when the node comes into existence, it has the permissions I want, and not necessarily the defaults. You can (must?) use /etc/rc.devfs [...] # Setup DEVFS, ie

Re: devfs(5) Permissions

2002-03-03 Thread Riccardo Torrini
On 03-Mar-2002 (17:02:35/GMT) Crist J. Clark wrote: I think some people missed the point of the earlier question. I'm really sorry :( Next time I'll double read the messages. Riccardo. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the

Re: usb product identified as ugen

2002-03-01 Thread Riccardo Torrini
On 28-Feb-2002 (19:33:04/GMT) Riccardo Torrini wrote: port 2 addr 2: full speed, power 400 mA, config 1, \ product 0x07d1(0x07d1), ScanLogic(0x04ce), rev 1.05 ugen0 [...] port 2 addr 2: full speed, self powered, config 1, \ USB to IDE(0x0002), USB to IDE(0x04ce), rev

Re: usb product identified as ugen

2002-02-28 Thread Riccardo Torrini
On 28-Feb-2002 (06:57:50/GMT) Riccardo Torrini wrote: The only difference in /dev was -ugen{0,0.1,0.2} +xpt0 :( # camcontrol rescan 0 Re-scan of bus 0 was successful # camcontrol devlist -v scbus0 on umass-sim0 bus 0: scbus-1 on xpt0 bus 0: at scbus-1 target -1

Re: usb product identified as ugen

2002-02-27 Thread Riccardo Torrini
On 27-Feb-2002 (18:35:18/GMT) Scott long wrote: You don't mention how your kernel is presently configured or what other troubleshooting you've done, so all you can hope to receive are wild guesses like: Usually I don't make stupid questions (I think), sorry for wasting your time, but after 4

Re: usb product identified as ugen

2002-02-27 Thread Riccardo Torrini
On 27-Feb-2002 (23:17:15/GMT) Scott Long wrote: I forgot this piece of messages, it happens only once, when I manually detached usb cable but never again when I rescan it. -8-[ messages ]-8- ...kernel: ugen0: at uhub0 port 2 (addr 2) disconnected ...kernel: ugen0: detached

Re: usb product identified as ugen

2002-02-27 Thread Riccardo Torrini
On 27-Feb-2002 (23:17:15/GMT) Scott Long wrote: Is the umass device compiled into the kernel, or loaded as a module? If it's a module, is it loaded before you attach the drive? The usb daemon isn't smart enough yet to load it... Now I have all compiled in. Something happens...

Re: usb product identified as ugen

2002-02-27 Thread Riccardo Torrini
On 28-Feb-2002 (05:05:40/GMT) Scott Long wrote: Anyway, ugen0 disappear from /dev/ but _no_ umass0 appear, only xpt0... The debug trace looks very good. I think this is the only good news... No umass0 device should appear in /dev. Instead, you should get a da device. Do 'camcontrol

RE: Today's panic on boot problem

2002-02-26 Thread Riccardo Torrini
On 26-Feb-2002 (17:27:19/GMT) Mike Silbersack wrote: I'm experiencing the same double panic on boot that PHK is now; are we the only ones, or is it just that nobody else has updated recently? Mee too, just survied to 4 auto-reboot without messages... Trying with a boot -v I see a keyboard

Re: -CURRENT in pretty good shape, after all

2002-02-23 Thread Riccardo Torrini
On 23-Feb-2002 (19:23:17/GMT) Julian Elischer wrote: I forgot the :-) [...] On Sat, Feb 23, 2002 at 10:35:44AM -0800, Julian Elischer wrote: that could change real soon! I certainly *hope* not. If you plan to break it, you plan to break it, but I hope you don't plan to render it

Re: -CURRENT in pretty good shape, after all

2002-02-23 Thread Riccardo Torrini
On 23-Feb-2002 (21:12:12/GMT) Dag-Erling Smorgrav wrote: Riccardo Torrini [EMAIL PROTECTED] writes: Anyway, any plan to fix build breakage? Sure: [...] This works. Thanks. I really need build to (try to?) locate missing /dev/speaker :( # kldload atspeaker This doesn't work. I'm

RE: USB detach crashes possibly fixed

2002-02-15 Thread Riccardo Torrini
On 14-Feb-2002 (08:29:50/GMT) Brian Fundakowski Feldman wrote: Please try this change (already committed to -CURRENT) and let me know if crashes due to detaching USB devices specifically have been eliminated. I cvsupped on Feb 14, 20:21 CET (GMT+1, Italian time), recompiled both world

Don't remove sc.0 from hints...

2002-02-15 Thread Riccardo Torrini
...or strange things happens. When trying to discover why /dev/speaker disappears from my last build (cvsupped on Feb 14, 20:21 CET) I commented sc.0 lines on /boot/device.hints. Big mistake :-) I think some sort of auto-pilot must stop this. Initial boot without sc.0 hint hide all highlight

Re: Don't remove sc.0 from hints...

2002-02-15 Thread Riccardo Torrini
On 15-Feb-2002 (22:17:10/GMT) Dan Nelson wrote: Same thing wrt floppy devices, I think. If you don't have hints lines, they don't get probed. hint.fdc.0.at=isa hint.fdc.0.port=0x3F0 hint.fdc.0.irq=6 hint.fdc.0.drq=2 hint.fd.0.at=fdc0 hint.fd.0.drive=0 May be. Or not. Even with _all_ this

RE: ftpd STOR and STOU work the same ?

2002-01-05 Thread Riccardo Torrini
On 05-Jan-2002 (19:47:53/GMT) Mike Heffner wrote: I noticed a strange behaviour, sending a file twice create version even if sunique is off, on all versions I can test. This is intentional... This is black magic. I hate it. I hope this would be (soon) documented _OR_ make configurable.

RE: ftpd STOR and STOU work the same ?

2002-01-04 Thread Riccardo Torrini
On 29-Dec-2001 (16:49:06/GMT) Riccardo Torrini wrote: I noticed a strange behaviour, sending a file twice create version even if sunique is off, on all versions I can test. This includes: - FreeBSD 5.0-CURRENT #0: Sun Dec 9 08:37:55 CET 2001 - FreeBSD 4.4-STABLE #6: Fri Oct 12 21:44:36

ftpd STOR and STOU work the same ?

2001-12-29 Thread Riccardo Torrini
I noticed a strange behaviour, sending a file twice create version even if sunique is off, on all versions I can test. This includes: - FreeBSD 5.0-CURRENT #0: Sun Dec 9 08:37:55 CET 2001 - FreeBSD 4.4-STABLE #6: Fri Oct 12 21:44:36 CEST 2001 - FreeBSD 4.5-PRERELEASE #0: Fri Dec 28 18:47:34 CET

Re: spam

2001-12-23 Thread Riccardo Torrini
On 22-Dec-2001 (22:23:24/GMT) aaron wrote: [...removed CC: because I suppose all subscribed this list...] any address found in the archives is automatically subscribed Any address found N times (where N reasonably high number, like 10, because we can not really assume that the archives are

Re: XFmail and libc.so.3

2001-11-02 Thread Riccardo Torrini
On 27-Oct-2001 (12:28:50/GMT) Riccardo Torrini wrote: I have the same problem of 27 october with src and world of last 31 oct, xfmail doesn't work with libc.so.3 from compat3x (either from ports or from COMPAT3X=yes), it crashes. Any ideas? The only method to make it happy is this hack

uscanner and devfs

2001-11-02 Thread Riccardo Torrini
With world of 31 oct I finally make my new scanner visible. It appear under /dev as uscanner0 and on console I got the notify: uscanner0: EPSON Perfection1240, rev 1.00/1.14, addr 2 and if I switch it off I got: uscanner0: at uhub0 port 1 (addr 2) disconnected uscanner0: detached and sane is

Re: buildworld breakage during make depend at usr.bin/kdump

2001-11-02 Thread Riccardo Torrini
On 02-Nov-2001 (12:58:55/GMT) Cyrille Lefevre wrote: because `echo' nicely removes \n's from env vars when it prints them. des@des ~% foo='bar quote baz' des@des ~% echo $foo bar baz des@des ~% /bin/echo $foo bar baz humm! what shell ($SHELL) are you using ? Here (5.0-CURRENT 31-Oct

XFmail and libc.so.3

2001-10-27 Thread Riccardo Torrini
To upgrade from xfree-3 to xfree-4 I removed all my installed ports but I lost mail program (I use XFMail, sorry for this :-) It compile and install fine but crashes with this message: The application crashed due to fatal error All unfinished messages were saved _: Report the bug with all the

XFree86-4 required?

2001-10-18 Thread Riccardo Torrini
Is a real need for ports under -CURRENT to require (from a week or two, I don't remember) XFree86-libraries? They asks for XFree86-libraries-4.1.0, but I have 3.3.6_10 installed. Can I (safetly) mix 3.3.6 and 4.1.0? Is the upgrade from 3.3.6 to 4.1.0 really needed? Planned? I haven't set

New features for -current

2001-10-14 Thread Riccardo Torrini
Over than an year ago (9.9.2000) I submitted a pr (kern/21154) to ask renaming from actual *_saver.ko to saver_*.ko of saver modules to uniform names under /boot/kernel as sound (snd_*), interfaces (if_*), splash (splash_*) and netgraph (ng_*). I tryed to figure where are used and I found only

Upgrade from old -CURRENT with this week src

2001-10-13 Thread Riccardo Torrini
After a successfull (?) upgrade from my old -CURRENT of Apr, 28 (usual stuff, buildworld, buildkernel, installkernel, installworld and mergemaster) I was unable to boot from yesterday night :( Yes, now it works, but first a little overview of my hardware: - MoBo Tyan Trinity S1590S, last bios,

Re: Different host behaviour

2001-10-03 Thread Riccardo Torrini
On 03-Oct-2001 (14:14:57/GMT) Bernd Walter wrote: Yes, my -CURRENT is really old, but I'm reading this list... ;) That's your problem. Pilot error :-( Ok, sorry for that. You see that this has been fixed at least since a month: ticso@cicely9 uname -v FreeBSD 5.0-CURRENT #1: Tue Sep

Different host behaviour

2001-10-02 Thread Riccardo Torrini
Different behaviour from 4.4 to 5.0 of host command. Why? Yes, I got finally delegation for reverse (with RFC 2317). Yes, my -CURRENT is really old, but I'm reading this list... ;) And sorry for long lines with custom formatting. Using nslookup from either 4.4 and 5.0 give me same results

Re: syslogd and -a

2001-07-01 Thread Riccardo Torrini
On 02-Jul-01 (04:20:44/GMT) Crist J. Clark wrote: It seems the -a option for syslogd does not work 100%. Hmmm... Looks like, # syslogd -a 192.168.1.0/29 Will work and, # syslogd -a 192.168.1.1/29 Won't. Under 4.3-STABLE is the same. To capure log from router I added (in rc.conf) -a

Can a program ignore all signals?

2001-06-12 Thread Riccardo Torrini
I'm trying to obtain a dump of a (working) cd disk on FreeBSD 5.0-CURRENT #17: Sat Apr 28 03:30:53 CEST 2001 I also have a 4.3-STABLE machine but I cannot test on it because it has no cd... The machine is all ide/ata, one hd, one cd and a writer. ---[ short-dmesg ]--- atapci0: VIA 82C586 ATA33

RE: ** HEADS UP **: sys/miscfs file systems moved

2001-05-23 Thread Riccardo Torrini
On 23-May-01 (09:53:13/GMT) Ruslan Ermilov wrote: - FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc - fdescfs, portal - portalfs, union - unionfs. - Renamed

Re: evil ATA

2001-05-16 Thread Riccardo Torrini
On 16-May-01 (15:14:50/GMT) Phil Knaack wrote: on udma controller. take a look at sysctl hw.atamodes (may look like 'dma,---,---,dma') and try change it to PIO mode. I noticed a few days ago that a new command was added to -current, called atacontrol. This command provides a real handy

Re: Boot messages

2001-04-25 Thread Riccardo Torrini
On 25-Apr-01 (01:31:59/GMT) Garrett Wollman wrote: The ``can't assign resources'' messages indicate that the devices are legacy ISA devices for which a non-PnP-aware driver is compiled into the kernel. These include devices such as keyboard... This means that I can remove this lines?

Re: nroff -man broken?

2001-04-25 Thread Riccardo Torrini
On 25-Apr-01 (07:55:22/GMT) Sheldon Hearn wrote: Check for catpages in */man/en.ISO_8859-1/cat* as well, using your own locale-dependent directory, of course. Only have /usr/share/man/en.ISO_8859-1/ but all dirs under this path (cat[1-9n] and cat1aout) are empty :-( # gzip -l cat1/man.1.gz

Re: nroff -man broken?

2001-04-25 Thread Riccardo Torrini
On 25-Apr-01 (07:18:57/GMT) Ruslan Ermilov wrote: There was a problem caused by broken `make cleandir' behavior. Make sure you have src/share/mk/bsd.obj.mk, revision 1.35. # $FreeBSD: src/share/mk/bsd.obj.mk,v 1.35 2001/04/23 14:47:40 ru Exp $ Going to make another world this night :(

nroff -man broken?

2001-04-24 Thread Riccardo Torrini
# man man Formatting page, please wait...mdoc error: end-macro (.em) respecification is not allowed. (#20) Should this have been `.Em ...'? User Abort. Done. This happens over last week. World of this night (after cvsup with also make kernel and mergemaster, for 4 times). I have also

Boot messages

2001-04-24 Thread Riccardo Torrini
I'm trying to understand why this happens at boot and if is my fault (maybe), strange hardware or undocumented feature :) isa0: unexpected small tag 14 unknown: PNP0303 can't assign resources pca1: AT-style speaker sound at port 0x61 on isa0 WARNING: Driver mistake: repeat

Re: Boot messages

2001-04-24 Thread Riccardo Torrini
On 24-Apr-01 (23:19:59/GMT) Dima Dorfman wrote: WARNING: Driver mistake: repeat make_dev(pcaudio) WARNING: Driver mistake: repeat make_dev(pcaudioctl) As it says, this is a driver mistake. It's a bug. Ok. It happens from first days of devfs. I'm looking into gnats but there isn't any

nroff stopped working

2001-04-21 Thread Riccardo Torrini
I'm using -current from 3.0 w/out big problems over last years. But after last 3 make world man breaks: trying _ANY_ man give me an empty page but under .../man/man*/*.gz sources are good. Only formatted-compressed pages are wrong. Even the command: # gzip -cd /usr/share/man/man1/man.1.gz |