Re: Why Adaptec 1540 bombing?

1999-10-13 Thread FreeBSD Bob
In message [EMAIL PROTECTED] Darryl Okahata writes: : If he can't, I've got a 1540A somewhere (in theory ;-) that I'd be : willing to lend out (if the address is in the US). It's been years : since I've used it, and so I'm not 100% sure that it still works, : though. Well, I could

Re: Why Adaptec 1540 bombing?

1999-10-13 Thread Warner Losh
In message [EMAIL PROTECTED] FreeBSD Bob writes: : The DPT did not run at all. I do not have access to the DPT controllers, nor to a EISA system for testing. : The 1540A did not run the 3.3 or 3.2, : but came up fine on 2.2.6 or 2.2.8. That got me to thinking that : something had changed in

Re: Why Adaptec 1540 bombing?

1999-10-12 Thread Warner Losh
In message [EMAIL PROTECTED] FreeBSD Bob writes: : It is a long shot, but I am curious if anyone knows of any problems in : using the Adaptec 1540A on 3.x or 4.x machines? The aha 1540 driver (me) didn't have access to the 1540A cards, so I made changes blind and never tested (nor did those

Re: Why Adaptec 1540 bombing?

1999-10-12 Thread Darryl Okahata
Warner Losh [EMAIL PROTECTED] wrote: If you can send me this card, I can see what I can do about making it work with the aha driver. There are problems with CAM and this hardware's use of transfer residuals which might make it hard to get working. If he can't, I've got a 1540A

Re: Why Adaptec 1540 bombing?

1999-10-12 Thread Warner Losh
In message [EMAIL PROTECTED] Darryl Okahata writes: : If he can't, I've got a 1540A somewhere (in theory ;-) that I'd be : willing to lend out (if the address is in the US). It's been years : since I've used it, and so I'm not 100% sure that it still works, : though. Well, I could install

Why Adaptec 1540 bombing?

1999-10-04 Thread FreeBSD Bob
Anyone in the current folks know why I might be getting problems with FreeBSD on an Adaptec 1540 controller? The machine works fine on 2.2.8 and 2.2.6, but dies a horrible screeching halt when installing 3.3 or 4.0. It literally just locks up solid when 3.3 or 4.0 probes the machine during the