Re: "vidcontrol -i mode" shows no output except header (in search of smaller console font)

Am 28.02.2022 um 09:35 schrieb Michael Schuster: On Mon, Feb 28, 2022 at 9:31 AM Ronald Klop > wrote: Hi, Where would this sysctl needed to be documented  for the OP to find it? There's many things to consider these days, so hard to find a single

Re: Dragonfly Mail Agent (dma) in the base system

Am 28.01.2022 um 19:04 schrieb Ed Maste: On Thu, 27 Jan 2022 at 16:34, Ed Maste wrote: If you have enabled DMA on your systems (or are willing to give it a try) and have any feedback or are aware of issues please follow up or submit a PR as appropriate. Thanks everyone for the feedback so

Re: No serial console: VBE not available

Am 26.02.2021 um 17:58 schrieb Toomas Soome via freebsd-current: On 26. Feb 2021, at 18:54, O. Hartmann wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 hello, running a FreeBSD appliance on top of a PCengines APU2C4 with the latest seabios (apu2_v4.13.0.3.rom). The PCengines boot

Re: New Optane AIC does not show up in FreeBSD until . . . ?

Am 16.02.2021 um 11:08 schrieb Mark Millard: On 2021-Feb-16, at 00:48, Harry Schmalzbauer wrote: Am 14.02.2021 um 02:36 schrieb Mark Millard via freebsd-current: On 2021-Feb-13, at 16:40, Warner Losh wrote: Are you aware of gpart create? Warner From which I derive that I had

Re: New Optane AIC does not show up in FreeBSD until . . . ?

Am 14.02.2021 um 02:36 schrieb Mark Millard via freebsd-current: On 2021-Feb-13, at 16:40, Warner Losh wrote: Are you aware of gpart create? Warner From which I derive that I had an implicit, incorrect assumption that gpart show would in some way list everything available that gpart could

Re: loader/boot fonts are painfully small (again)

Am 15.02.2021 um 16:55 schrieb Daniel Nebdal: On Fri, 12 Feb 2021 at 15:33, Rodney W. Grimes < freebsd-...@gndrsh.dnsmgr.net> wrote: On 11. Feb 2021, at 23:21, Yuri Pankov wrote: Lenovo P51 laptop, 15'' 4k (3840x2160) display. Booting from the latest available current snapshot (20210107),

Re: rc.d/zpool runs before ada(4) attaches

Am 01.12.2020 um 16:34 schrieb Ian Lepore:: : : : You can define these in /boot/loader.conf: #kern.cam.boot_delay="1" # Delay (in ms) of root mount for CAM bus #kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI Maybe that helps. Ronald. Those settings control waiting before

Re: rc.d/zpool runs before ada(4) attaches

Am 01.12.2020 um 10:33 schrieb Ronald Klop: : : : One machine fails importing zpool because the correponding vdevs (ada0-ada2) are not available at the time rc.d/zpool runs. Adhoc  I'm not aware of any rc(8) vs. driver awareness. Is there any? Suggestions how to fix else than 'sleep 1'?

rc.d/zpool runs before ada(4) attaches

Hello,  I'm playing with HEAD (post r364746, Merge OpenZFS support in to HEAD) on some of my non-out-of-box setups. One machine fails importing zpool because the correponding vdevs (ada0-ada2) are not available at the time rc.d/zpool runs. Adhoc  I'm not aware of any rc(8) vs. driver

zfs.core, 'send' crashing - how to debug offline?

Hello, playing with -current snapshot provides all kinds of surprises :-) The one  regarding the topic: 'zfs send' aborts with "invalid argument". The machine in question doesn't have internet access (but local FreeBSD FTP mirror, so I managed to install matching base-dbg). What debugger am I

kern.panic_reboot_wait_time – no effect on KDB-less machine

Hello, currently, I have one stable/12-i386 machine panicing as ESXi guest. The kernel was built without KDB.  Hence, I set debug.debugger_on_panic=0 in loader.conf. Additionally, I set kern.panic_reboot_wait_time=20 But after the panic, the memory is dumped to swap and an immediate reboot

Re: r339289 buildworld stopped in /usr/src/secure/lib/libcrypto

Am 12.10.2018 um 07:41 schrieb Dag-Erling Smørgrav: Jung-uk Kim writes: I forgot to patch one more file, i.e., Makefile.inc1. Please try the attached patch instead. Thanks, I missed that too. DES Even with 339326 (adjusting Makefile.inc1) I get the foollowing build error (compiling

Re: netipsec/key.c ALPHA3 uma_zalloc->witness_warn, exclusive sleep mutex xforms_list (IPsec transforms list)

Am 24.09.2018 um 14:50 schrieb Andrey V. Elsukov: On 24.09.2018 11:31, Harry Schmalzbauer wrote: Hello, unfortunately this is far beyond my scope and I forgot to report in time. If this is begnin, feel free to ignore, but in any case I'd appreciate any comments. Hi, I posted a review

netipsec/key.c ALPHA3 uma_zalloc->witness_warn, exclusive sleep mutex xforms_list (IPsec transforms list)

Hello, unfortunately this is far beyond my scope and I forgot to report in time. If this is begnin, feel free to ignore, but in any case I'd appreciate any comments. uma_zalloc_arg: zone "1024" with the following non-sleepable locks held: exclusive sleep mutex xforms_list (IPsec transforms

conf/MINIMAL without "options BUF_TRACKING"

Hello, is the MINIMAL (in sys/adm64/conf) kernel config intentionally missing options BUF_TRACKING    # Track buffer history Not that I'm missing it, but to my understanding debug features shouldn't differ for predefined -current KERNCONF. Thanks, -harry

Loader post r338064 deletes GOP screen when asking geli passphrase

Hello, as far as I understand, r338064 should bring back default loader environment. I'm UEFI booting r338093/amd64 (LynxPoint/Haswell). Since today, the GOP-console output of the first loader lines get deleted when the geli passphrase prompt shows up. Nothing uncommon here, and never

Re: EFIRT on machines with pcid after r337773

Am 15.08.2018 um 00:17 schrieb Konstantin Belousov: If you use UEFI boot, have EFIRT compiled in kernel (the case of GENERIC) or pre-loaded as module, and efirt is not disabled by a tunable, and the machine resets during kernel initialization, try this. diff --git a/sys/amd64/amd64/pmap.c

Re: CURRENT from today throws lots of ACPI errors, lost HDMI detection

Am 15.08.2018 um 10:43 schrieb Vladimir Zakharov: Hello! On Tue, Aug 14, 2018, Pete Wright wrote: On 8/14/18 6:13 PM, Kyle Evans wrote: On Tue, Aug 14, 2018 at 7:28 PM, Pete Wright wrote: i also attempted to boot using UEFI but the system hangs very early in the boot process. i have

non-bootable (UEFI, geli, ZFS) kernel on haswell [Was: Re: CURRENT from today throws lots of ACPI errors, lost HDMI detection]

Am 15.08.2018 um 06:01 schrieb Kyle Evans: On Tue, Aug 14, 2018 at 10:56 PM, Pete Wright wrote: On 8/14/18 8:45 PM, Kyle Evans wrote: On Tue, Aug 14, 2018 at 10:41 PM, Pete Wright wrote: On 8/14/18 6:13 PM, Kyle Evans wrote: On Tue, Aug 14, 2018 at 7:28 PM, Pete Wright wrote: i also

Re: [CFT] ypldap testing against OpenLDAP and Microsoft Active Directory

Bezüglich Jan Bramkamp's Nachricht vom 13.06.2016 14:46 (localtime): > > > On 10/06/16 16:29, Peter Wemm wrote: >> On 6/9/16 6:49 PM, Matthew Seaman wrote: >>> On 09/06/2016 18:34, Craig Rodrigues wrote: There is still value to ypldap as it is now, and getting feedback from users