On 31 March 2011 16:50, Sevan / Venture37 ventur...@gmail.com wrote:
On 31 March 2011 10:07, Aleksandr Rybalko r...@dlink.ua wrote:
Now good peoples help me with rework of driver, then this driver will be
available under ral(4).
So you need to wait some time.
Excellent, I'm happy to be a
rt28600: Ralink RT2790 PCIe mem 0xf7f0-0xf7f0 irq 17 at
device 0.0 on pci3
rt28600: invalid EEPROM LNA gain #2: 0x00
rt28600: invalid EEPROM LNA gain #3: 0x00
rt28600: invalid EEPROM powersave level
rt28600: MAC/BBP RT2860 (rev 0x28720200), RF RT3022 2.4G 2T2R
Wow, your
On Thu, 31 Mar 2011 23:44:03 -0700 (PDT)
PseudoCylon moonlightak...@yahoo.ca wrote:
rt28600: Ralink RT2790 PCIe mem 0xf7f0-0xf7f0 irq 17 at
device 0.0 on pci3
rt28600: invalid EEPROM LNA gain #2: 0x00
rt28600: invalid EEPROM LNA gain #3: 0x00
rt28600: invalid EEPROM
Hi Sevan,
On Thu, 31 Mar 2011 01:49:04 +0100
Sevan / Venture37 ventur...@gmail.com wrote:
On 20 March 2011 13:36, Aleksandr Rybalko r...@ddteam.net wrote:
Hi folks,
new version of patch for wireless card based on Ralink RT2860 plus
RT3090 that required testing.
Main part:
On 31 March 2011 10:07, Aleksandr Rybalko r...@dlink.ua wrote:
Now good peoples help me with rework of driver, then this driver will be
available under ral(4).
So you need to wait some time.
Excellent, I'm happy to be a tester for patches, the card is a
Azurewave RT2700E out of a EEPC if I
On Thu, 31 Mar 2011 16:50:16 +0100
Sevan / Venture37 ventur...@gmail.com wrote:
On 31 March 2011 10:07, Aleksandr Rybalko r...@dlink.ua wrote:
Now good peoples help me with rework of driver, then this driver
will be available under ral(4). So you need to wait some time.
Excellent, I'm
On 20 March 2011 13:36, Aleksandr Rybalko r...@ddteam.net wrote:
Hi folks,
new version of patch for wireless card based on Ralink RT2860 plus
RT3090 that required testing.
Main part:
http://my.ddteam.net/files/2011-03-20_rt2860.patch
sys/conf/(files|options), same as last:
I urge you to have a closer look at ral(4) and it's way of handling
RT2500 and RT2600 specific differences. In it's simplest form you can
copy the OpenBSD code 1:1 without any functional changes, heck, it's
the source of this driver anyway.
--
Bernhard
I've look on
On 22/03/11 01:35 AM, PseudoCylon wrote:
FreeBSD's if_runreg.h is the same as OpenBSD's if_rt2860reg.h. (Though, I
have
been ignoring syncing changes related to RT3090. run(4) doesn't supports it.)
In
fact, OpenBSD doesn't have if_runreg.h, instead they share if_rt2860reg.h. We
can
as far my knowledge goes, radiation from multi-frequency subcarriers in
a multi-path
system such as a wireless network (802.11 a/g/n) or a microwave oven
is something
you definitely want to avoid sitting in while hacking FreeBSD...
https://gthc.org/wiki/Advisories/OFDM_20110315
I may have done
as far my knowledge goes, radiation from multi-frequency subcarriers in
a multi-path
system such as a wireless network (802.11 a/g/n) or a microwave oven
is something
you definitely want to avoid sitting in while hacking FreeBSD...
https://gthc.org/wiki/Advisories/OFDM_20110315
I may
Date: Tue, 22 Mar 2011 06:46:12 -0400
From: Etienne Robillard e...@gthcfoundation.org
Subject: Re: [CFR]RT305xF support, w/o attachment
To: Adrian Chadd adr...@freebsd.org
Cc: freebsd-current@freebsd.org
Message-ID: 4d887df4.6060...@gthcfoundation.org
Content-Type: text/plain; charset=ISO
On Monday 21 March 2011 00:16:01 Aleksandr Rybalko wrote:
On Mon, 21 Mar 2011 05:59:45 +0800
Adrian Chadd adr...@freebsd.org wrote:
On 21 March 2011 04:28, Sergey V. Dyatko sergey.dya...@gmail.com
wrote:
Last patch from Aleksandr 'works fine for me', so... may be rt2860
should
Hi,
On Mon, 21 Mar 2011 07:04:22 +0100
Bernhard Schmidt bschm...@freebsd.org wrote:
On Monday 21 March 2011 00:16:01 Aleksandr Rybalko wrote:
On Mon, 21 Mar 2011 05:59:45 +0800
Adrian Chadd adr...@freebsd.org wrote:
On 21 March 2011 04:28, Sergey V. Dyatko sergey.dya...@gmail.com
On Monday, March 21, 2011 10:29:11 Aleksandr Rybalko wrote:
Hi,
On Mon, 21 Mar 2011 07:04:22 +0100
Bernhard Schmidt bschm...@freebsd.org wrote:
On Monday 21 March 2011 00:16:01 Aleksandr Rybalko wrote:
On Mon, 21 Mar 2011 05:59:45 +0800
Adrian Chadd adr...@freebsd.org wrote:
On Mon, 21 Mar 2011 11:00:49 +0100
Bernhard Schmidt bschm...@freebsd.org wrote:
On Monday, March 21, 2011 10:29:11 Aleksandr Rybalko wrote:
Hi,
On Mon, 21 Mar 2011 07:04:22 +0100
Bernhard Schmidt bschm...@freebsd.org wrote:
On Monday 21 March 2011 00:16:01 Aleksandr Rybalko wrote:
So can You (or someone else) hint me, how to done this?
switch (what to do) {
case 'Remake run to support PCI and SoC interface':
Much work to make driver bus independent;
case 'Port OpenBSD one':
driver do not support SoC (SoC device don't have MCU);
break;
case 'Place
on 21/03/2011 13:04 Etienne Robillard said the following:
So can You (or someone else) hint me, how to done this?
switch (what to do) {
case 'Remake run to support PCI and SoC interface':
Much work to make driver bus independent;
case 'Port OpenBSD one':
driver do not support
I am not sure why this thread has deserved your attention - not everyone has
as
good mastery of English as you do. And sometimes some people are more prone
to
doubts.
FYI im not very good in English as its not my main language too. However
constructive
comments are usually
Hi folks,
new version of patch for wireless card based on Ralink RT2860 plus
RT3090 that required testing.
Main part:
http://my.ddteam.net/files/2011-03-20_rt2860.patch
sys/conf/(files|options), same as last:
http://my.ddteam.net/files/2011-03-18_rt2860_invoking.patch
Who use Ralink
Hi all,
I plan on tidying up the initial support patch (removing some of the stuff
that snuck in from the ethernet, switch and wifi parts) and committing this
sometime in the next week or so.
I don't (yet) have hardware to test it myself. I'll just do a compile run
and try to make sure it hasn't
On Sun, 20 Mar 2011 15:36:04 +0200
Aleksandr Rybalko r...@ddteam.net wrote:
Hi folks,
new version of patch for wireless card based on Ralink RT2860 plus
RT3090 that required testing.
Main part:
http://my.ddteam.net/files/2011-03-20_rt2860.patch
sys/conf/(files|options), same as last:
On Sun, 20 Mar 2011 23:31:51 +0800
Adrian Chadd adr...@freebsd.org wrote:
Hi all,
Hi, Adrian
I plan on tidying up the initial support patch (removing some of the
stuff that snuck in from the ethernet, switch and wifi parts) and
committing this sometime in the next week or so.
I don't
On 21 March 2011 04:28, Sergey V. Dyatko sergey.dya...@gmail.com wrote:
Last patch from Aleksandr 'works fine for me', so... may be rt2860
should be replaced to 'rt' for example ?
rt0: flags= blah-blah-blah IHMO looks more .nice(?) than
rt28600: flags=
Yup, that's a good idea.
On Mon, 21 Mar 2011 05:59:45 +0800
Adrian Chadd adr...@freebsd.org wrote:
On 21 March 2011 04:28, Sergey V. Dyatko sergey.dya...@gmail.com
wrote:
Last patch from Aleksandr 'works fine for me', so... may be rt2860
should be replaced to 'rt' for example ?
rt0: flags= blah-blah-blah IHMO
Is someone able to help me hunt down a mini-PCIe ralink card?
I'd like to help Aleksandr include his SoC MIPS stuff to FreeBSD and as part
of that I'd like to try and make this wireless driver work on supported
PCI/PCIe cards. But I completely lack the hardware to do so, and I lack the
time to
On Thu, 17 Mar 2011 15:45:26 +0800
Adrian Chadd adr...@freebsd.org wrote:
Is someone able to help me hunt down a mini-PCIe ralink card?
I'd like to help Aleksandr include his SoC MIPS stuff to FreeBSD and
as part of that I'd like to try and make this wireless driver work on
supported
Cool! You've just volunteered to help Aleksandr at least get the driver
compiling, probing and attaching. :)
I'll review and commit something to head when you have it somewhat working,
ok? :)
Adrian
(Cool, I can get back to fixing if_ath issues.)
On 17 March 2011 16:08, Sergey V. Dyatko
On Thu, 17 Mar 2011 16:57:49 +0800
Adrian Chadd adr...@freebsd.org wrote:
Cool! You've just volunteered to help Aleksandr at least get the
driver compiling, probing and attaching. :)
I'll review and commit something to head when you have it somewhat
working, ok? :)
sure, cause I tired
Hi again!
On Wed, 16 Mar 2011 20:44:05 +0200
Aleksandr Rybalko r...@ddteam.net wrote:
Hi,
On Wed, 16 Mar 2011 18:06:59 +0100
Jan Henrik Sylvester m...@janh.de wrote:
Hello!
On 01/-10/-28163 20:59, Aleksandr Rybalko wrote:
3. RT2860 802.11n controller authors Damien Bergamini and
On Thu, 17 Mar 2011 13:26:16 +0200
Aleksandr Rybalko r...@dlink.ua wrote:
Hi again!
On Wed, 16 Mar 2011 20:44:05 +0200
Aleksandr Rybalko r...@ddteam.net wrote:
Hi,
On Wed, 16 Mar 2011 18:06:59 +0100
Jan Henrik Sylvester m...@janh.de wrote:
Hello!
On 01/-10/-28163
Hello!
On 01/-10/-28163 20:59, Aleksandr Rybalko wrote:
3. RT2860 802.11n controller authors Damien Bergamini and Alexander Egorenkov
http://my.ddteam.net/files/2011-03-14_rt2860.patch
only modification to work with RT2872 (embedded to RT305[02]F) wrote by
me.
Is this
Hi,
On Wed, 16 Mar 2011 18:06:59 +0100
Jan Henrik Sylvester m...@janh.de wrote:
Hello!
On 01/-10/-28163 20:59, Aleksandr Rybalko wrote:
3. RT2860 802.11n controller authors Damien Bergamini and Alexander
Egorenkov http://my.ddteam.net/files/2011-03-14_rt2860.patch
only modification
Hello, all.
I am pleased to present support for Ralink RT3050F/RT3052F MIPS SoC's for
FreeBSD.
This patches add support of
1. GPIO/Interrupt/System/UART controllers + internal bus
http://my.ddteam.net/files/2011-03-14_RT305xF_support.patch
2. RT305xF embedded ethernet controller
34 matches
Mail list logo
