With my Acer AW35/Pro (CS4236) and -current I can play sound just fine,
but I can't record. (Recording and full duplex worked fine with
3.4-stable.)
When I run
rec -c 1 -f s -r 44100 -s w test.wav
rec just sits, blocked in pcmrd, and rec can't be interrupted with
ctl-c. The output file test.wav never increases in size, always
remaining 0 bytes long.
My kernel config file has "device pcm".
Any ideas?
Matt
---------------------
cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Feb 4 2000 14:51:04
Installed devices:
pcm0: <CS423x> at io 0x534 irq 5 drq 1:0 (1p/1r channels duplex)
---------------------
FreeBSD 4.0-CURRENT #0: Fri Feb 4 14:52:00 PST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/BILBO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,XMM>
real memory = 134205440 (131060K bytes)
avail memory = 126857216 (123884K bytes)
Preloaded elf kernel "kernel" at 0xc0316000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
vga-pci0: <NVidia Riva TNT2 graphics accelerator> mem
0xe2000000-0xe3ffffff,0xe0
000000-0xe0ffffff irq 11 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xd800-0xd80f at device
4.1 on pc
i0
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086,
dev=0x7112) at 4.2
irq 10
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at
device
4.3 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem
0xdf800000-0xdf80
007f irq 10 at device 9.0 on pci0
xl0: Ethernet address: 00:10:5a:ab:87:55
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcm0: <CS423x> at port 0x534-0x537,0x388-0x38f,0x220-0x22f irq 5 drq 1,0
on isa0
joy0: <CSC0001 PnP Joystick> at port 0x200-0x207 on isa0
unknown0: <CTRL> at port 0x120-0x127 on isa0
unknown1: <MPU> at port 0x330-0x331 irq 9 on isa0
IPsec: Initialized Security Association Processing.
ad0: 8223MB <ST38422A> [16708/16/63] at ata0-master using UDMA33
acd0: CDROM <ATAPI 44X CDROM> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
---------------------
pnpinfo:
Card assigned CSN #1
Vendor ID CSCd937 (0x37d9630e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 1
Device Description: AW35/Pro (Resource R2.2-D7)
Logical Device ID: CSC0000 0x0000630e #0
Device Description: WSS/SB
TAG Start DF
Good Configuration
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 - only one type (true/edge)
I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8
[16-bit addr]
I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Acceptable Configuration
DMA: channel(s) 1 3
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 9 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8
[16-bit addr]
I/O Range 0x220 .. 0x260, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 9 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x3f8, alignment 0x8, len 0x8
[16-bit addr]
I/O Range 0x220 .. 0x300, alignment 0x20, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: CSC0001 0x0100630e #1
Device Description: GAME
TAG Start DF
Good Configuration
I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: CSC0010 0x1000630e #2
Device Description: CTRL
I/O Range 0x120 .. 0xff8, alignment 0x8, len 0x8
[16-bit addr]
Logical Device ID: CSC0003 0x0300630e #3
Device Description: MPU
TAG Start DF
Good Configuration
IRQ: 9 - only one type (true/edge)
I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 9 11 12 15 - only one type (true/edge)
I/O Range 0x330 .. 0x360, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
I/O Range 0x330 .. 0x3e0, alignment 0x8, len 0x2
[16-bit addr]
TAG End DF
End Tag
Successfully got 46 resources, 4 logical fdevs
-- card select # 0x0001
CSN CSCd937 (0x37d9630e), Serial Number 0xffffffff
Logical device #0
IO: 0x0534 0x0534 0x0534 0x0534 0x0534 0x0534 0x0534 0x0534
IRQ 5 0
DMA 1 0
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #3
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 9 0
DMA 4 4
IO range check 0x00 activate 0x01
------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
