Bernd,
.
Seems that handling the stalled condition failed.
Can you try the following patch:
I was *just* going to write you saying it was still running with this
patch, which would have been the longest yet. But then I saw these messages:
umass0: BBB reset failed, STALLED
On Mon, Aug 25, 2003 at 04:22:57PM -0700, Lars Eggert wrote:
It seems that this happens under light or no load only. I had been doing
a heavy cycle of dump/restore/dd, etc, and all was well. Could it be
that the MicroDrive does some kind of internal power management that
delays its reponses
Here's another, different one:
(da2:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:0): SCSI Status: Check Condition
(da2:umass-sim0:0:0:0): UNIT ATTENTION asc:0,0
(da2:umass-sim0:0:0:0): No additional sense
this happens with an IBM MicroDrive mounted on a USB CF reader, -current
from 8/19/03. I couldn't get a coredump:
umass0: BBB reset failed, STALLED
(da2:umass-sim0:0:0:0): AutoSense Failed
umass0: BBB reset failed, STALLED
(da2:umass-sim0:0:0:0): AutoSense Failed
panic: softdep_setup_freeblocks:
On Mon, 25 Aug 2003, Lars Eggert wrote:
Nate Lawson wrote:
this happens with an IBM MicroDrive mounted on a USB CF reader, -current
from 8/19/03. I couldn't get a coredump:
umass0: BBB reset failed, STALLED
(da2:umass-sim0:0:0:0): AutoSense Failed
umass0: BBB reset failed, STALLED
On Mon, Aug 25, 2003 at 02:11:45PM -0700, Lars Eggert wrote:
Here's another, different one:
(da2:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:0): SCSI Status: Check Condition
(da2:umass-sim0:0:0:0):