I installed two different tv cards in two different boxes running current. In both cases, I have severe problems. I have very little in the way of logs, case 1: ATI all in wonder 128 using gatos under linux emulation. tv player comes up, but I cant click on any buttons, and if I hit any key on the kb while the application has focus my box reboots without anything sent to syslog. I figure this is unsupported, so no big deal. case 2: after having the above problem, I got a haupage wintv card: bktr0: <BrookTree 878> mem 0xe8001000-0xe8001fff irq 9 at device 11.0 on pci0 iicbb0: <I2C generic bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only smbus0: <System Management Bus> on bti2c0 bktr0: Hauppauge Model 61201 A2ME Hauppauge WinCast/TV, Philips NTSC tuner. thats how the kernel reports it. Just when I was getting my hopes up, I made fxtv from the ports and ran it, little window comes up, looks great and 2 sec later the entire box freezes, I cant even soft reset, I have to turn the power off and back on. I tried with and without iicbb0, iicbus0, smbus0. No noticable difference. right now, it looks like my best option is either: downgrade to 3.4 where there are many success stories using BrookTree 878. play with the gatos code till I can figure out how to turn off all keyboard input. Any thoughts? I know its not my hardware cause both devices work fine in windows. -- ---------------------------------------------------- Adriel Ickler Network Administrator - [EMAIL PROTECTED] Self Trading Securities - Voice: 512-263-2769 www.selftrading.com - Fax: 512-263-2141 ---------------------------------------------------- I knew her before she was a virgin. -- Oscar Levant, on Doris Day To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message