Once again our vinum build failed. This time it could do over 90% of
14 hours of work and we didn't got a panic just a hang. Only we
could do while system was printing ata error messages was to press
reset button. Difference to earlier situation is that we put back old
3c905 xl-card and removed
After adding more disks to this system it dies continously. Last two
traces look quite the same.
Tomppa
---clipclip---
login: kernel trap 19 with interrupts disabled
NMI ... going to debugger
kernel: type 19 trap, code=0
Stopped at rtcintr+0x57: callrtcin
db trace
rtcintr(0) at
Tomi Vainio - Sun Finland [EMAIL PROTECTED] writes:
After adding more disks to this system it dies continously. Last two
traces look quite the same.
Tomppa
---clipclip---
login: kernel trap 19 with interrupts disabled
NMI ... going to debugger
An NMI almost certainly indicates a
On Sun, 28 Sep 2003 08:27 pm, Tomi Vainio - Sun Finland wrote:
After adding more disks to this system it dies continously. Last two
traces look quite the same.
Tomppa
It could be a power supply on the way out. I had an old dual P-166 that
rebooted misterously until I took out two CD-ROM