On 9 Nov, Archie Cobbs wrote:
[EMAIL PROTECTED] writes:
(101) netchild@ttyp2 man -k adadadad
cat: /etc/isdn/connect.parameters: Permission denied
adadadad: nothing appropriate
(102) netchild@ttyp2 grep cat /etc/rc.conf.local
spppconfig_isp0="`cat /etc/isdn/connect.parameters`"
Is this
[EMAIL PROTECTED] wrote in list.freebsd-current: you wrote (9 Nov
1999 21:13:42 +0100):
(101) netchild@ttyp2 man -k adadadad
cat: /etc/isdn/connect.parameters: Permission denied
adadadad: nothing appropriate
(102) netchild@ttyp2 grep cat /etc/rc.conf.local
spppconfig_isp0="`cat
Warner Losh [EMAIL PROTECTED] wrote:
Card ejection (including suspend) doesn't work, which I'll try to fix
at some point, but I might not get around to fixing that before new
pccard work begins. I think it would be easy to mostly fix (like the
old code mostly worked) with more thought on how to
On 10 Nov, Oliver Fromme wrote:
Using command substitution in /etc/rc.conf{,.local} is NOT
officially supported. I think it should have always been
clear that there should _only_ be plain variable assignments.
But with i4b you have to specify a username-password pair in rc.conf
[EMAIL PROTECTED] wrote:
(101) netchild@ttyp2 man -k adadadad
cat: /etc/isdn/connect.parameters: Permission denied
adadadad: nothing appropriate
(102) netchild@ttyp2 grep cat /etc/rc.conf.local
spppconfig_isp0="`cat /etc/isdn/connect.parameters`"
^^^
Calling
It seems Alexandr Listopad wrote:
Hello!
What about subj?
Did FreeBSD support HPT366 in the CURRENT???
Yes it does.
And if "yes" then what shall I do for it???
Use the ata driver.
If I boot from floppies - then error and reboot after 15sec, and don't
find this drive on IDE... what
On 10-Nov-99 at 06:59, Alexander Leidinger ([EMAIL PROTECTED])
wrote: On 10 Nov, Oliver Fromme wrote:
Using command substitution in /etc/rc.conf{,.local} is NOT
officially supported. I think it should have always been
clear that there should _only_ be plain variable assignments.
But
Just tried installing a 4.0-current system from Nov 9
snapshot, on a DELL 6350, 3 18g drives, 512m RAM,
Got Signal Trap 12 while in kernel mode. This happened
(each time) after it probed the CD drive.
I've installed previous 4.0 snaps on this platform without
incident.
FYI.
_F
To
On Wed, 10 Nov 1999, Doug Ambrisko wrote:
On one out of 8 machines, I ran into this problem. My network is running
at 100BaseTX. I noticed that ifconfig showed OACTIVE flag set and I
was running in autosense mode. So I setup the media to 100BaseTX and now
it works okay.
My guess is the
On 10 Nov, [EMAIL PROTECTED] wrote:
Ok, so we (root of machine xxx) have either a security hole
(dial-in-passwd visible to everyone) or we have to forget the
recommended way of doing it.
It looks to me as though the recommended way of doing it needs to
be changed. How about putting the
Greetings,
Just so everyone knows, the latest BIOSes for ABIT motherboards
and ABIT Controller cards with the HPT366 Controller as well as MS Drivers
can be found at:
http://140.113.153.55/stuff/ide_card/HighPoint/HPT366/index-e.htm
Cheers,
Vince - [EMAIL PROTECTED] - [EMAIL
I backed to Nov 01 snapshot and the install went fine;
however it appears it's not writing out partition information
correctly. We performed 3 installs, and went over each
step judiciously, and when you reboot after the install,
it complains about invalid parition information.
At 12:26 PM
In message [EMAIL PROTECTED] MIHIRA
Sanpei Yoshiro-san writes:
: I think FreeBSD-4-current does not support PC-Card suspend yet.
Yes. That's correct. I broke it when I did my last batch of newbus
code.
: I read and diffed old code and current code. But I did not find
: out anything
On Wed, Nov 10, 1999 at 03:05:28PM -0700, Warner Losh wrote:
: # or we need to rewrite and maintain pccard code(/sys/dev/pccard)?
That's the real answer. Anybody willing to help, please let me know.
I have probe/attach code for the pcic code (in /sys/dev/pcic) going,
but I've not hooked up
In message [EMAIL PROTECTED] Christopher Masto writes:
: I'd love to see this fixed, though. It's an incredible annoyance to
: have to shut my laptop off instead of suspending.
Agreed.
: As for the arguments about "safe" removal, let's not let the quest for
: the perfect shed kill this; if the
subscribe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
There are a couple of things you can do if your make release
fails while trying to make the docs.
You could use "on demand" dialing for ppp so that it connects only
when it needs to (and hangs up after some period of inactivity) so
you're not connected for so long. Making these ports is the
17 matches
Mail list logo