Re: 5.0/5.1: Installer does not find CD-ROM drive - even thoughit's booted off it

2003-06-11 Thread Vitaly Markitantov
On Tue, Jun 10, 2003 at 09:19:08PM -0500, [EMAIL PROTECTED] wrote: FWIW - I have a Samsung SM-348 48x CD/DVD combo unit that works just fine under 5.1 (and 4.8): acd0: CD-RW SAMSUNG CDRW/DVD SM-348B at ata0-master PIO4 Yes, i have 48X SAMSUNG CD-ROM SC-148T, and it works fine under 5.1 and

Re: New Kernel Breaks IPFW

2003-06-11 Thread Terry Lambert
Ian Freislich wrote: Terry Lambert wrote: Short term, cd /usr/src/sbin/ipfw; make depend make all install ought to fix it. I tried that as well, but the new binary also dumps core, but works well with previous versions of the firewall. Even back as far as my kernel.working

Re: New Kernel Breaks IPFW

2003-06-11 Thread Terry Lambert
Ian Freislich wrote: Andre Guibert de Bruet wrote: Ian, The new ipfw binary will work with an up-to-date kernel. What you need to do is boot this new kernel and only then try out the new ipfw binary. That doesn't really explain why the new ipfw binary core dumped with the new kernel,

Re: ACPI Regression in -CURRENT?

2003-06-11 Thread Terry Lambert
Stijn Hoop wrote: This is due to the Dell laptops having an invalid ACPI table in the BIOS. The only way to avoid these messages is to tell FreeBSD ACPI to override the vendor supplied table with a correct one. Alternately, since Microsoft works just peachy with this thing, it's somewhat

Re: Epson Perfection 1250 Photo USB scanner

2003-06-11 Thread Michael Reifenberger
On Wed, 11 Jun 2003, Martin Dieringer wrote: Date: Wed, 11 Jun 2003 01:51:12 +0200 (CEST) From: Martin Dieringer [EMAIL PROTECTED] To: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Epson Perfection 1250 Photo USB scanner Hi, I just got the Epson 1250 usb scanner working on -current by

Re: Correct PCI suspend and resume operations [ was Re: cirrus ich3doesn't work after suspend to disk ]

2003-06-11 Thread Terry Lambert
Orion Hodson wrote: It looks like the pci configuration space state has been lost during the suspend and resume. This may be because the bus has removed power from the devices attached to it on suspend. I've been through a cross section of drivers this morning and some explicitly save and

5.1 install failure

2003-06-11 Thread Petri Helenius
I´m booting 5.1 install in IBM x342 with floppies (because the thing does not seem to want to boot from the CD-ROM) and when sysinstall goes into probing devices, I get a message about / filesystem being full and I´m going nowhere without my init and then the kernel panics. Any ideas how to

Compaq and 5.1-RELEASE

2003-06-11 Thread Antony T Curtis
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'm trying to install 5.1-R onto a Compaq Amarda V300 series laptop. If I allow ACPI to be loaded, it hangs pretty quick right after trying to mount the memory disk. However, in safe mode, it works until during the unpacking/installing, I get a

Re: libevent for FreeBSD ?

2003-06-11 Thread Terry Lambert
David Leimbach wrote: Interesting. I don't believe it needs to be in the source tree. I am not saying its bad code or isn't useful... I just don't understand what it has to do with FreeBSD. Does any of the other base code need this library? If so it would already be there wouldn't it?

Re: fxp0: device timeout with 5.1BETA2

2003-06-11 Thread Markus Wennrich
On Tue, Jun 10, 2003 at 02:08:54PM +0200, Markus Wennrich wrote: fxp0: device timeout I get these as well. Is it on irq9 by any chance, along with acpi0 ? No. It's on irc 11 device 8 (as dmesg states). All irqs in bios are set to 11 (factory default). ACPI is disabled. Ok,

Re: Compaq and 5.1-RELEASE

2003-06-11 Thread Terry Lambert
Antony T Curtis wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'm trying to install 5.1-R onto a Compaq Amarda V300 series laptop. If I allow ACPI to be loaded, it hangs pretty quick right after trying to mount the memory disk. However, in safe mode, it works until during the

Re: [solved] buildworld error

2003-06-11 Thread Gordon Bergling
Hi all, On Tue Jun 10, 2003 at 07:50PM -0400, Garance A Drosihn wrote: At 9:42 PM +0200 6/10/03, Gordon Bergling wrote: Since I disable BDECFLAGS in /etc/make.conf this problem goes away. I don't know if this effects the build process in any other way. I had enable them around 4.5-RELEASE or

Re: ThinkPad T20 with 5.0R wakes up from halt -p

2003-06-11 Thread Oliver Fischer
Hello Kevin, Kevin Oberman schrieb: It is possible that the latest BIOS update (released 30-Apr) and ACPI code will fix the problem, but I can't confirm anything. In any case, you should go to 5.1. It fixes many, many things! where did you find it? At IBM's site I found only version 1.21. from

[-CURRENT tinderbox] failure on sparc64/sparc64

2003-06-11 Thread Tinderbox
TB --- 2003-06-11 09:41:32 - starting CURRENT tinderbox run for sparc64/sparc64 TB --- 2003-06-11 09:41:32 - checking out the source tree TB --- cd /home/des/tinderbox/CURRENT/sparc64/sparc64 TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src TB --- 2003-06-11 09:44:19 - building world TB

kernel: lnc0: Missed packet -- no reviece buffer QWE

2003-06-11 Thread Anthony Wyatt
Hi Everyone, I'm in the process of hand building a FreeBSD 5.1 CURRENT #2 box. I now have a booting system that I can log onto and use, but my network interface does not work :-( I get lots of: kernel: lnc0: Missed packet -- no recieve buffer and the occasional kernel: lnc0: Device

Re: libevent for FreeBSD ?

2003-06-11 Thread Daniel C. Sobral
David Leimbach wrote: Interesting. I don't believe it needs to be in the source tree. I am not saying its bad code or isn't useful... I just don't understand what it has to do with FreeBSD. Does any of the other base code need this library? If so it would already be there wouldn't it? If

adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread T. Muddletin
On my previous FreeBSD version (5.0 April 21 snapshot), my ADSL/pppoe setup worked fine... as it always has all the way back to 4.x. Now having installed 5.1-RELEASE, with no other changes, ppp no longer can seeming no longer connect to my adsl modem. I've been struggling with this for days. Is

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread Thomas Moestl
On Wed, 2003/06/11 at 01:16:50 +0200, Bernd Walter wrote: On Tue, Jun 10, 2003 at 03:34:36PM -0700, John-Mark Gurney wrote: M. Warner Losh wrote this message on Tue, Jun 10, 2003 at 08:27 -0600: : hdrtype = REG(PCIR_HEADERTYPE, 1); : This needs to be tested on that given

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Gerald Mixa
On Wednesday 11 June 2003 13:53, T. Muddletin wrote: Well, does your DSL Provider really support IPV6 ? Actually for me it seems that you try to establish an ipv6 connection, which is rarley supported! On my previous FreeBSD version (5.0 April 21 snapshot), my ADSL/pppoe setup worked fine...

Re: kernel: lnc0: Missed packet -- no reviece buffer QWE

2003-06-11 Thread Paul Richards
On Wed, Jun 11, 2003 at 09:51:02PM +1000, Anthony Wyatt wrote: Hi Everyone, I'm in the process of hand building a FreeBSD 5.1 CURRENT #2 box. I now have a booting system that I can log onto and use, but my network interface does not work :-( I get lots of: kernel: lnc0: Missed

Re: imgact_gzip.c

2003-06-11 Thread Peter Edwards
On Sat, 2003-06-07 at 10:13, Poul-Henning Kamp wrote: In message [EMAIL PROTECTED], David Yeske writes: imgact_gzip.c seems to be pretty stale.  Has anyone considered fixing this?  If this were fixed then kldload() / linker_load_module() could deal with a gzipped .ko file, and gzipped elf

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Michael Nottebrock
On Wednesday 11 June 2003 13:53, T. Muddletin wrote: On my previous FreeBSD version (5.0 April 21 snapshot), my ADSL/pppoe setup worked fine... as it always has all the way back to 4.x. Now having installed 5.1-RELEASE, with no other changes, ppp no longer can seeming no longer connect to my

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread P. U. Kruppa
On Wed, 11 Jun 2003, Gerald Mixa wrote: On Wednesday 11 June 2003 13:53, T. Muddletin wrote: Well, does your DSL Provider really support IPV6 ? Actually for me it seems that you try to establish an ipv6 connection, which is rarley supported! On my previous FreeBSD version (5.0 April 21

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread Thomas Moestl
On Tue, 2003/06/10 at 16:41:44 -0700, John-Mark Gurney wrote: Thomas Moestl wrote this message on Wed, Jun 11, 2003 at 01:02 +0200: On Tue, 2003/06/10 at 15:34:36 -0700, John-Mark Gurney wrote: There's a similar problem with hme devices in some Netra models, and so far I have just ignored

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Thomas Moestl [EMAIL PROTECTED] writes: : On Tue, 2003/06/10 at 16:41:44 -0700, John-Mark Gurney wrote: : Thomas Moestl wrote this message on Wed, Jun 11, 2003 at 01:02 +0200: : On Tue, 2003/06/10 at 15:34:36 -0700, John-Mark Gurney wrote: : There's a

kernel compile now depends on /usr/include ?

2003-06-11 Thread Poul-Henning Kamp
I thought that including stuff from /usr/include in kernel code was bad style ? If it is, Should src/include/bitstring.h be repocopied to src/sys/sys/bitstring.h ? Alternatively, we need some makefile magic to cater for the following case: + set -e + P=/bang/somewhere + rm -rf /bang/somewhere

Re: kernel: lnc0: Missed packet -- no reviece buffer QWE

2003-06-11 Thread Bruce Cran
On Wed, Jun 11, 2003 at 09:51:02PM +1000, Anthony Wyatt wrote: Hi Everyone, I'm in the process of hand building a FreeBSD 5.1 CURRENT #2 box. I now have a booting system that I can log onto and use, but my network interface does not work :-( I get lots of: kernel: lnc0: Missed

ACPI problems on 5.1-RELEASE

2003-06-11 Thread Jesse D. Guardiani
Howdy list, What info do I need to provide, and who do I need to send it to, so that I can get ACPI into a usable state on my IBM A30p thinkpad? The short description of my acpi problems is that I can suspend the laptop with 'acpiconf -s 3', but not with 'acpiconf -s 1', and the laptop never

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread Thomas Moestl
On Wed, 2003/06/11 at 08:34:39 -0600, M. Warner Losh wrote: In message: [EMAIL PROTECTED] Thomas Moestl [EMAIL PROTECTED] writes: : On Tue, 2003/06/10 at 16:41:44 -0700, John-Mark Gurney wrote: : Thomas Moestl wrote this message on Wed, Jun 11, 2003 at 01:02 +0200: : Ok, the

Re: ThinkPad T20 with 5.0R wakes up from halt -p

2003-06-11 Thread Kevin Oberman
Date: Wed, 11 Jun 2003 12:47:33 +0200 From: Oliver Fischer [EMAIL PROTECTED] Hello Kevin, Kevin Oberman schrieb: It is possible that the latest BIOS update (released 30-Apr) and ACPI code will fix the problem, but I can't confirm anything. In any case, you should go to 5.1. It

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Alistair Sutton
* Craig Boston ([EMAIL PROTECTED]) wrote: I recently purchased a generic CompUSA branded CardBus USB 2.0 controller for a challenge to try to get it to work under FreeBSD ;) It appears to use an NEC chip -- one that I've seen reports of the PCI version working -- so at least some of the

Makefile.yp aka /var/yp/Makefile.dist

2003-06-11 Thread Ruslan Ermilov
Just as a precaution, does anyone have any objections to my removing of these funny $^ sequences from Makefile.yp? They were apparently used to insert something into the map generation pipeline just before the yp_mkdb(8) invokation, but recent additions to this file did not follow this rule.

Re: kernel compile now depends on /usr/include ?

2003-06-11 Thread Ruslan Ermilov
On Wed, Jun 11, 2003 at 04:38:53PM +0200, Poul-Henning Kamp wrote: I thought that including stuff from /usr/include in kernel code was bad style ? Yes, src/sys/ should be self-hosted. If it is, Should src/include/bitstring.h be repocopied to src/sys/sys/bitstring.h ? Yes please. Then a

accessing smbfs volume using nautilus

2003-06-11 Thread Bruce Cran
I've got a new install of FreeBSD 5.1-RELEASE, and have installed gnome 2.2.1. Using Nautilus I access a volume mounted using smbfs. The files display correctly, but I get loads of messages: smb_maperror: Unmapped error 1:158 on the console, and accessing the files seems very slow. Is this a

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread T. Muddletin
Gerald wrote on Wednesday, June 11, 2003, 9:43:02 AM: Well, does your DSL Provider really support IPV6 ? Actually for me it seems that you try to establish an ipv6 connection, which is rarley supported! That is interesting; I can't see where it appears to be this though. Perhaps something in

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Craig Boston
On Wed, 2003-06-11 at 17:08, Alistair Sutton wrote: [snip dmesg] cardbus1: serial bus, USB at device 0.2 (no driver attached) That output seems a little funny, between the Resource not specified in CIS and claiming there is no driver attached right after it attaches ohci... Only the

Re: ACPI Regression in -CURRENT?

2003-06-11 Thread Harald Hanche-Olsen
+ Stijn Hoop [EMAIL PROTECTED]: | Hi Thorsten, | | On Tue, Jun 10, 2003 at 03:42:18PM +0200, Thorsten Greiner wrote: | some time ago several people (including me) reported ACPI related problems | on various Dell laptops resulting in error messages of the form | | ACPI-0293: ***

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread T. Muddletin
Michael wrote on Wednesday, June 11, 2003, 10:02:25 AM: Are you sure you really have 5.1-RELEASE and not 5-CURRENT shortly after -RELEASE? There have been many other reports on pppoe related breakage with ppp in -CURRENT, but 5.1-RELEASE should work (at least it works fine for me). I

BDECFLAGS being added to CFLAGS and CWARNFLAGS ( was Re: [solved]buildworld error)

2003-06-11 Thread Scot W. Hetzel
From: Munehiro Matsuda [EMAIL PROTECTED] I was having the same compile error, until I commeted out the BDECFLAGS definition from /etc/make.conf. Looking into the problematic Makefiles, I've found that following Makefiles do references BDECFLAGS, which matches errors I was getting:

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread Bernd Walter
On Wed, Jun 11, 2003 at 04:26:27PM +0200, Thomas Moestl wrote: On Tue, 2003/06/10 at 16:41:44 -0700, John-Mark Gurney wrote: Ok, the only problem is that is then we have the same problem the ACPI code does in that hot swapping cards would have a problem. Since it appears to me that the OFW

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Bernd Walter
On Tue, Jun 10, 2003 at 10:51:10AM -0500, Craig Boston wrote: I recently purchased a generic CompUSA branded CardBus USB 2.0 controller for a challenge to try to get it to work under FreeBSD ;) It appears to use an NEC chip -- one that I've seen reports of the PCI version working -- so at

Re: LG 5350 cell phone

2003-06-11 Thread Sean Welch
I have this phone myself. I have two adapters for it -- one is a serial cable the other a true (as in no serial to usb conversion box in the middle) usb cable. The phone works great under FreeBSD on the serial cable (normal Hayes modem type at commands work fine), but no version of FreeBSD has

Re: BDECFLAGS being added to CFLAGS and CWARNFLAGS ( was Re:[solved] buildworld error)

2003-06-11 Thread Garance A Drosihn
At 2:29 PM -0500 6/11/03, Scot W. Hetzel wrote: From: Munehiro Matsuda [EMAIL PROTECTED] I was having the same compile error, until I commeted out the BDECFLAGS definition from /etc/make.conf. Looking into the problematic Makefiles, I've found that following Makefiles do references

Re: ACPI Regression in -CURRENT?

2003-06-11 Thread Stijn Hoop
On Wed, Jun 11, 2003 at 08:18:26PM +0200, Harald Hanche-Olsen wrote: + Stijn Hoop [EMAIL PROTECTED]: | Hi Thorsten, | | On Tue, Jun 10, 2003 at 03:42:18PM +0200, Thorsten Greiner wrote: | some time ago several people (including me) reported ACPI related problems | on various Dell

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread Justin T. Gibbs
I'm thinking that the loop should be more like: pcifunchigh = 0; f = 0; hdrtype = REG(PCIR_HEADERTYPE, 1); if (hdrtype 0x7f 2) continue; My only complaint about this is that if no device is present in the

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread Justin T. Gibbs
+* +* If we don't hardware the bus down, pciconf gets confused. */ if (sc-secbus != 0) { - child = device_add_child(dev, pci, -1); + child = device_add_child(dev, pci, sc-secbus); if (child != NULL)

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Justin T. Gibbs [EMAIL PROTECTED] writes: : I'm thinking that the loop should be more like: : : pcifunchigh = 0; : f = 0; : hdrtype = REG(PCIR_HEADERTYPE, 1); : if (hdrtype 0x7f 2) :

Repeatable panic at boot with ida(4)

2003-06-11 Thread William Carrel
With 5.1-RELEASE and all recent SNAP's a Compaq Proliant 1850R I have here will panic during boot. The symptoms are consistent with the report mailed in by Ventsislav Velkov [EMAIL PROTECTED] on March 31st about other Compaq hardware, so it is within the realm of imagination that the machine

Re: PCI bus numbering and orphaned devices

2003-06-11 Thread Justin T. Gibbs
: I'm thinking that the loop should be more like: : : pcifunchigh = 0; : f = 0; : hdrtype = REG(PCIR_HEADERTYPE, 1); : if (hdrtype 0x7f 2) : continue; : : My only complaint about this is that if no device is present in the : slot, won't

smp idle pigs

2003-06-11 Thread Andy Farkas
With recent -current, in the :pigs page of systat(1) I've noticed that idle time gets displayed on NCPU+1 lines: NCPU=2: /0 /10 /20 /30 /40 /50 /60 /70 /80 /90 /100 idle root idle: cpu0 root idle: cpu1

[-CURRENT tinderbox] failure on sparc64/sparc64

2003-06-11 Thread Tinderbox
TB --- 2003-06-11 21:32:22 - starting CURRENT tinderbox run for sparc64/sparc64 TB --- 2003-06-11 21:32:22 - checking out the source tree TB --- cd /home/des/tinderbox/CURRENT/sparc64/sparc64 TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src TB --- 2003-06-11 21:34:43 - building world TB

Re: LG 5350 cell phone

2003-06-11 Thread Josef Karthauser
On Wed, Jun 11, 2003 at 01:05:00PM -0500, Sean Welch wrote: I have this phone myself. I have two adapters for it -- one is a serial cable the other a true (as in no serial to usb conversion box in the middle) usb cable. The phone works great under FreeBSD on the serial cable (normal Hayes

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Josef Karthauser
On Wed, Jun 11, 2003 at 09:37:35PM +0200, Bernd Walter wrote: On Tue, Jun 10, 2003 at 10:51:10AM -0500, Craig Boston wrote: I recently purchased a generic CompUSA branded CardBus USB 2.0 controller for a challenge to try to get it to work under FreeBSD ;) It appears to use an NEC chip --

Re: ACPI Regression in -CURRENT?

2003-06-11 Thread Harald Hanche-Olsen
+ Stijn Hoop [EMAIL PROTECTED]: | I tried that on my Inspiron 4150 with 5.1-RELEASE. The patch failed, | but only for trivial reasons like different placment of braces. | | Note that you have to patch the output of iasl -d, *NOT* the .asl file | that acpidump generates. There is a difference

DRI/XFree86/FreeBSD/OpenGL problem

2003-06-11 Thread Lefteris Chatzibarbas
Hello, I have a problem with DRI on FreeBSD. Specifically, in some OpenGL programs, objects are not drawn at all (in some cases only some of them get drawn) (DRI enabled), but when DRI is disabled all work fine. A simple example of such program is:

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Craig Boston
On Wed, 2003-06-11 at 19:37, Bernd Walter wrote: There are known problems with USB2.0 cardbus cards. We have some kind of resource problem - Warner already wrote something about it some time ago. Ah, thanks. Any hints on where to find it? I tried adding his name to my archive/google searches

Re: ACPI Regression in -CURRENT?

2003-06-11 Thread Stijn Hoop
On Thu, Jun 12, 2003 at 12:46:32AM +0200, Harald Hanche-Olsen wrote: + Stijn Hoop [EMAIL PROTECTED]: | I tried that on my Inspiron 4150 with 5.1-RELEASE. The patch failed, | but only for trivial reasons like different placment of braces. | | Note that you have to patch the output of

Re: ACPI Regression in -CURRENT?

2003-06-11 Thread Stijn Hoop
On Tue, Jun 10, 2003 at 11:38:18PM -0700, Terry Lambert wrote: Stijn Hoop wrote: This is due to the Dell laptops having an invalid ACPI table in the BIOS. The only way to avoid these messages is to tell FreeBSD ACPI to override the vendor supplied table with a correct one. Alternately,

Re: kernel: lnc0: Missed packet -- no reviece buffer QWE

2003-06-11 Thread Anthony Wyatt
Hi Bruce, -- To email me add QWE to the subject From: Bruce Cran To: Anthony Wyatt CC: [EMAIL PROTECTED] Subject: Re: kernel: lnc0: Missed packet -- no reviece buffer QWE Date: Wed, 11 Jun 2003 15:39:33 +0100 On Wed, Jun 11, 2003 at 09:51:02PM +1000, Anthony Wyatt

Re: kernel: lnc0: Missed packet -- no reviece buffer QWE

2003-06-11 Thread Anthony Wyatt
Hi Bruce, Thanks for -- To email me add QWE to the subject From: Bruce Cran To: Anthony Wyatt CC: [EMAIL PROTECTED] Subject: Re: kernel: lnc0: Missed packet -- no reviece buffer QWE Date: Wed, 11 Jun 2003 15:39:33 +0100 On Wed, Jun 11, 2003 at 09:51:02PM

Re: kernel: lnc0: Missed packet -- no reviece buffer QWE

2003-06-11 Thread Anthony Wyatt
Hi Bruce, Thanks for your reply: I get lots of: kernel: lnc0: Missed packet -- no recieve buffer and the occasional kernel: lnc0: Device timeout -- resetting I get this all the time on my FreeBSD 4.8-RELEASE system, which is a P75 with a lnc NIC. The

Re: ACPI Regression in -CURRENT?

2003-06-11 Thread Kevin Oberman
Date: Thu, 12 Jun 2003 01:12:06 +0200 From: Stijn Hoop [EMAIL PROTECTED] Sender: [EMAIL PROTECTED] On Thu, Jun 12, 2003 at 12:46:32AM +0200, Harald Hanche-Olsen wrote: + Stijn Hoop [EMAIL PROTECTED]: | I tried that on my Inspiron 4150 with 5.1-RELEASE. The patch failed, | but only

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Bernd Walter
On Wed, Jun 11, 2003 at 11:45:38PM +0100, Josef Karthauser wrote: On Wed, Jun 11, 2003 at 09:37:35PM +0200, Bernd Walter wrote: On Tue, Jun 10, 2003 at 10:51:10AM -0500, Craig Boston wrote: I recently purchased a generic CompUSA branded CardBus USB 2.0 controller for a challenge to try to

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Bernd Walter
On Wed, Jun 11, 2003 at 11:08:42PM +, Craig Boston wrote: On Wed, 2003-06-11 at 19:37, Bernd Walter wrote: There are known problems with USB2.0 cardbus cards. We have some kind of resource problem - Warner already wrote something about it some time ago. Ah, thanks. Any hints on

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Andrew Lankford
I'm having trouble with the latest build of -CURRENT as well. Same problem, slightly different symptoms: Portions of my config file: disable ipv6 deny pap set device PPPoE:xl0 ...produce this in the log (repeatedly): Jun 11 22:00:14 bogushost2 ppp[222]: Warning: Unexpected node type

CSTD=c99 breaks package creation

2003-06-11 Thread Kris Kennaway
On Tue, Jun 10, 2003 at 04:38:58AM -0700, Kris Kennaway wrote: A couple of ports are creating broken bzip2 archives since I updated the build environments to 5.1-CURRENT: ports-i386%bzip2 -t ja-makejvf-fkr-1.0_1.tbz bzip2: ja-makejvf-fkr-1.0_1.tbz: file ends unexpectedly You can use

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Kris Kennaway
On Wed, Jun 11, 2003 at 10:34:39PM -0400, Andrew Lankford wrote: I'm having trouble with the latest build of -CURRENT as well. Same problem, slightly different symptoms: Portions of my config file: disable ipv6 deny pap set device PPPoE:xl0 ...produce this in the log (repeatedly):

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Daniel O'Connor
On Thu, 12 Jun 2003 12:04, Andrew Lankford wrote: I'm having trouble with the latest build of -CURRENT as well. Same problem, slightly different symptoms: Portions of my config file: disable ipv6 deny pap set device PPPoE:xl0 ...produce this in the log (repeatedly): Jun 11 22:00:14

CURRENT console setttings borked

2003-06-11 Thread Andrew Lankford
Info about my buildworld: FreeBSD bogushost2 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Wed Jun 11 21:33:34 EDT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ARL5KERNEL i386 In addition to my pppoe/adsl connection no longer working, I find that I cannot use control-c to kill running programs when

sh job control

2003-06-11 Thread Paul Richards
I've installed a current built last night and job control no longer works in /bin/sh or /usr/local/bin/zsh, but it does with csh. ctr-c and ctrl-z are just ignored with both the sh style shells. -- Tis a wise thing to know what is wanted, wiser still to know when it has been achieved and wisest

Re: CURRENT console setttings borked

2003-06-11 Thread Paul Richards
On Wed, Jun 11, 2003 at 11:21:16PM -0400, Andrew Lankford wrote: Info about my buildworld: FreeBSD bogushost2 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Wed Jun 11 21:33:34 EDT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ARL5KERNEL i386 In addition to my pppoe/adsl connection no longer

Re: kernel: lnc0: Missed packet -- no reviece buffer QWE

2003-06-11 Thread Paul Richards
On Wed, Jun 11, 2003 at 03:39:33PM +0100, Bruce Cran wrote: I get this all the time on my FreeBSD 4.8-RELEASE system, which is a P75 with a lnc NIC. The man page does say this driver is one of the more verbose ones, and I think the message about no recieve buffer is just that the system cannot

*IT WORKS* Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Craig Boston
Believe it or not, after futzing with the debugger for hours, reading the OHCI spec, and trying to figure out why writing to the control registers works exactly as it should but the card seems to ignore the ED list, I decided to try something completely crazy and put the line

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Craig Boston
On Wednesday 11 June 2003 07:21 pm, Bernd Walter wrote: On Wed, Jun 11, 2003 at 11:45:38PM +0100, Josef Karthauser wrote: The detach code could be made to work fairly easily. It's mostly there I believe, but disabled. Nick couldn't convince himself that all the used memory was being

Re: CSTD=c99 breaks package creation

2003-06-11 Thread Tim Robbins
On Wed, Jun 11, 2003 at 07:37:01PM -0700, Kris Kennaway wrote: It's possible that there's either a bug in gcc or there is C code in the system that has a different meaning when interpreted to C99 standards. I think I may have found the problem, and I think it's in GNU tar. GNU tar does this:

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Andrew Lankford
Can you try backing out bsd.sys.mk to r1.26 and rebuild your world and kernel? Later versions of this file are causing strange problems with package builds. I was a little lazy and just backed out bsd.sys.mk to 1.26 as you suggested, rebuilt /usr/lib/ , /usr/include/, and ppp. My kernel is

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Kris Kennaway
On Wed, Jun 11, 2003 at 10:48:32PM -0600, Andrew Lankford wrote: Can you try backing out bsd.sys.mk to r1.26 and rebuild your world and kernel? Later versions of this file are causing strange problems with package builds. I was a little lazy and just backed out bsd.sys.mk to 1.26 as you

Re: Correct PCI suspend and resume operations

2003-06-11 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Orion Hodson [EMAIL PROTECTED] writes: : It looks like the pci configuration space state has been lost during : the suspend and resume. This may be because the bus has removed power : from the devices attached to it on suspend. During a suspend, devices

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Andrew Lankford
Thanks, that's actually more useful because it isolates the problem. It's probably something in ppp that is misbehaving with CSTD=c99. True. A simple rebuild of ppp (without libc, etc.) didn't change anything. Andrew Lankford

Re: Correct PCI suspend and resume operations

2003-06-11 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Mark Santcroos [EMAIL PROTECTED] writes: : On Tue, Jun 10, 2003 at 09:15:05PM +0200, Mark Santcroos wrote: : AFAICT, we don't common code for handling this and maybe there should : be some rather than have each driver replicate this behaviour. : :

Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Bernd Walter [EMAIL PROTECTED] writes: : On Tue, Jun 10, 2003 at 10:51:10AM -0500, Craig Boston wrote: : I recently purchased a generic CompUSA branded CardBus USB 2.0 : controller for a challenge to try to get it to work under FreeBSD ;) It : appears

Re: *IT WORKS* Re: CardBus USB 2.0 Controller (NEC uPD)

2003-06-11 Thread Craig Boston
Cut-and-paste of the patch since the attachment disappeared... Probably won't apply cleanly because of tabs. --- ohci_pci.c.orig 2003-06-11 22:32:42.0 -0500 +++ ohci_pci.c 2003-06-11 22:01:43.0 -0500 @@ -173,6 +173,8 @@ /* XXX where does it say so in the spec? */

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Wiktor Niesiobedzki
On Wed, Jun 11, 2003 at 09:50:22PM -0700, Kris Kennaway wrote: On Wed, Jun 11, 2003 at 10:48:32PM -0600, Andrew Lankford wrote: Can you try backing out bsd.sys.mk to r1.26 and rebuild your world and kernel? Later versions of this file are causing strange problems with package builds.

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Kris Kennaway
On Thu, Jun 12, 2003 at 07:18:12AM +0200, Wiktor Niesiobedzki wrote: On Wed, Jun 11, 2003 at 09:50:22PM -0700, Kris Kennaway wrote: On Wed, Jun 11, 2003 at 10:48:32PM -0600, Andrew Lankford wrote: Can you try backing out bsd.sys.mk to r1.26 and rebuild your world and kernel? Later

Re: adsl/pppoe no longer connecting on 5.1

2003-06-11 Thread Tim Robbins
On Thu, Jun 12, 2003 at 07:18:12AM +0200, Wiktor Niesiobedzki wrote: On Wed, Jun 11, 2003 at 09:50:22PM -0700, Kris Kennaway wrote: On Wed, Jun 11, 2003 at 10:48:32PM -0600, Andrew Lankford wrote: Can you try backing out bsd.sys.mk to r1.26 and rebuild your world and kernel? Later

Re: FTP and command-line multiple downloads

2003-06-11 Thread Mike Heffner
On 06-Jun-2003 Yar Tikhiy wrote: | | Luke Mewburn may be convinced to do that | in his ftp client. Technically, the task is as easy as removing a | single logical subexpression from an if statement. | When I proposed the patch to Luke back in February he was hesistant to implement it. He