On Thu, Jun 19, 2003 at 01:16:56AM +0200, Maxime Henrion wrote:
> walt wrote:
> > Poul-Henning Kamp wrote:
> >
> > >I have uploaded a proof of concept patch:
> > >
> > > http://phk.freebsd.dk/patch/fd_dev.patch
> >
> >
> > >...And with this code enabled, it is possible to go from userland to
>
> "Bernd" == Bernd Walter <[EMAIL PROTECTED]> writes:
Bernd> Please compile USB_DEBUG into your kernel and do a sysctl
Bernd> hw.usb.ehci.debug=2 before connecting a device.
Here's the report... (I'm includin the syslog timestamps because the
output happens in several spurts.)
Jun 19 00:41:2
On 18 Jun, I wrote:
> When I was attempting to debug a system deadlock problem where the
> culprit process was sleeping on a "pool mutex", I noticed that "show
> witness" in ddb doesn't report anything about this particular mutex
> flavor. I discovered that witness doesn't monitor these mutexes be
One thing that jumps out at me on my T30 is that when I issue the S3,
the disk spins down instantly. Under APM it takes several seconds and
under Windows XP it also pauses bor a few (maybe 4) seconds.
I suspect it is powering down the disk as soon as the S3 is issued and
the write cache is never g
My Dell is exhibiting this error message all over the place..
At USENIX I was told someone had a fix..
Julian
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECT
My new web server won't mount NFS from fstab on reboot.
on NFSD: (/etc/exports)
/home2 -maproot=0 -alldirs httpd
on HTTPD: (/etc/fstab)
NFSD:/home2 /home nfs rw,bg 0 0
mount NFSD:/home2 /home
Works fine until I reboot. Shouldn't it mou
On 18 Jun, Chris Shenton wrote:
> Don Lewis <[EMAIL PROTECTED]> writes:
>
>> Try the very untested patch below ...
>
>> RCS file: /home/ncvs/src/sys/kern/uipc_syscalls.c,v
>> retrieving revision 1.150
>> Try the very untested patch below ...
>> diff -u -r1.150 uipc_syscalls.c
>> --- uipc_syscalls
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Thanks!
I have it working nicely now - without any problems.
I decompiled, fixed and compiled... problem sorted :)
On Wednesday 18 June 2003 8:58 am, Sid Carter wrote:
> On Tue, Jun 17, 2003 at 04:21:41PM +0100, Antony T Curtis wrote:
> > On a Comp
Soeren Schmidt writes:
> It seems Nicolai E M Plum wrote:
> > I noticed some ATA problems solved in -current recently, so I tried
> > compiling a kernel from sources about 2 days ago. Booting from that
> > (GENERIC) kernel, I do not get "Mounting root..", instead I get
> > (approximately, can't cut
Jesse Guardiani <[EMAIL PROTECTED]> wrote:
> Help! This APM BIOS suspends fine under Linux (2.4.18
> kernel)! I've tried everything I can think of to
> get suspend working under 5.1-RELEASE!
Wild-a** guess:
> ata1-slave: timeout waiting for interrupt
> ata1-slave: ATAPI identify failed
Don Lewis <[EMAIL PROTECTED]> writes:
> Try the very untested patch below ...
> RCS file: /home/ncvs/src/sys/kern/uipc_syscalls.c,v
> retrieving revision 1.150
> Try the very untested patch below ...
> diff -u -r1.150 uipc_syscalls.c
> --- uipc_syscalls.c 12 Jun 2003 05:52:09 - 1.150
>
walt wrote:
> Poul-Henning Kamp wrote:
>
> >I have uploaded a proof of concept patch:
> >
> > http://phk.freebsd.dk/patch/fd_dev.patch
>
>
> >...And with this code enabled, it is possible to go from userland to
> >device driver without touching Giant underway.
>
> I'm sorry, I can't parse t
Poul-Henning Kamp wrote:
I have uploaded a proof of concept patch:
http://phk.freebsd.dk/patch/fd_dev.patch
...And with this code enabled, it is possible to go from userland to
device driver without touching Giant underway.
I'm sorry, I can't parse that last sentence. Could you explain in
25
I have uploaded a proof of concept patch:
http://phk.freebsd.dk/patch/fd_dev.patch
WARNING: It is perfectly possibly that this patch eats your machine
WARNING: destroys your disk and makes your corn-flakes soggy.
WARNING: RUN AT YOUR OWN RISK!
This patch basically shortcuts access
> From: "Robert Hulme" <[EMAIL PROTECTED]>
> Date: Wed, 18 Jun 2003 21:03:18 +0100
> Sender: [EMAIL PROTECTED]
>
> Hi,
>
> Yesterday I sent in an email to freebsd-current about the problems with
> wi in 5.1-Current. There haven't been any replies to suggest anyone
> knows why this is happening, h
> From: Juan Rodriguez Hervella <[EMAIL PROTECTED]>
> Date: Wed, 18 Jun 2003 17:51:00 +0200
> Sender: [EMAIL PROTECTED]
>
> On Wednesday 18 June 2003 17:39, Bernd Walter wrote:
> > On Wed, Jun 18, 2003 at 04:54:44PM +0200, Juan Rodriguez Hervella wrote:
> > > Hello!:
> > >
> > > I tried to make my
Hi,
Yesterday I sent in an email to freebsd-current about the problems with
wi in 5.1-Current. There haven't been any replies to suggest anyone
knows why this is happening, how to fix it, or anyone looking into
fixing it.
Can someone please direct me as to which list (or which person) I should
co
I put this on comp.unix.bsd.freebsd.misc, but I'll ask here too.
Is there any reason for the terminfo man page?
It's a good man page, a very stylish and well-written man page, but it's
wrong.
It says the terminfo files are in /usr/share/misc/terminfo (they're not
there). They do get installed i
On Wed, 18 Jun 2003, Sebastian Yepes [ESN] wrote:
> Any one know how to turn off the screen on a notebook i mean totally
> off, Not the dpms
>
> The problem is that when i close the lid it stays on and produces to
> much heat..
>
> 5-Current on dell inspiron 8500 (with AML patch)
More sucky a
On 18 Jun, Chris Shenton wrote:
> Don Lewis <[EMAIL PROTECTED]> writes:
>
>> Try the very untested patch below ...
>
>> RCS file: /home/ncvs/src/sys/kern/uipc_syscalls.c,v
>
> When I do the patch, how much of the OS do I need to rebuild, just do
> a "make install" in the ".../src/sys/kern" dir?
Don Lewis <[EMAIL PROTECTED]> writes:
> Try the very untested patch below ...
> RCS file: /home/ncvs/src/sys/kern/uipc_syscalls.c,v
When I do the patch, how much of the OS do I need to rebuild, just do
a "make install" in the ".../src/sys/kern" dir? Rebuild the OS from
the top dir? Rebuild the
Not sure if this is the appropriate list, but
I've tried the -mobile list a few times with no
response.
Background:
---
I have an IBM Thinkpad A30p with all the latest
BIOS code and Controller code.
It's running 5.1-RELEASE well. But I had to set:
hw.pci.allow_unsupported_io_range=1
T
On Wednesday 18 June 2003 09:42 am, Sebastian Yepes [ESN] wrote:
> Any one know how to turn off the screen on a notebook
> i mean totally off, Not the dpms
>
> The problem is that when i close the lid it stays on and produces to much
> heat..
It varies from notebook to notebook. For example, on m
Hi all..
Any one know how to turn off the screen on a notebook
i mean totally off, Not the dpms
The problem is that when i close the lid it stays on and produces to much
heat..
5-Current on dell inspiron 8500 (with AML patch)
--
/*
FingerPrint:
5BF1 58B1 DE75 CBE3 6044
7098 1246 1EF6 9E7
> "Mark" == Mark Santcroos <[EMAIL PROTECTED]> writes:
Mark> Ok, it would really help if you try and document all cases until
Mark> you at least exactly know the behavior. From there we can go on.
What am I looking for? S1 appears to work. S5 appears to work (that
is: shutdown -p now works)
On Wed, Jun 18, 2003 at 12:11:52PM -0400, David Gilbert wrote:
> You shouldn't happen to have a reference to the one posted to the
> list, would you? Sometimes the FreeBSD list search facility isn't
> that useful. I'll make an effort to find it.
Date: Tue, 27 May 2003 22:28:32 +0200
Subject: Re:
> "Mark" == Mark Santcroos <[EMAIL PROTECTED]> writes:
Mark> On Tue, Jun 17, 2003 at 10:57:32PM -0400, David Gilbert wrote:
>> I have a Dell D800 laptop (as I've mentioned a few times here) and
>> I've gone so far as to upgrade the BIOS to A03 and fetch new ACPI
>> DSDT code from the linux sit
On Wed, Jun 18, 2003 at 05:51:00PM +0200, Juan Rodriguez Hervella wrote:
> On Wednesday 18 June 2003 17:39, Bernd Walter wrote:
> > On Wed, Jun 18, 2003 at 04:54:44PM +0200, Juan Rodriguez Hervella wrote:
> > > Hello!:
> > >
> > > I tried to make my Nvidia video card work yesterday, and everytime
>
On Wednesday 18 June 2003 17:39, Bernd Walter wrote:
> On Wed, Jun 18, 2003 at 04:54:44PM +0200, Juan Rodriguez Hervella wrote:
> > Hello!:
> >
> > I tried to make my Nvidia video card work yesterday, and everytime
> > I launched the X system my computer hang up. So I had to
> > make a hard reboot.
On Tue, Jun 17, 2003 at 06:40:59AM -0600, M. Warner Losh wrote:
> : I think devd(8) should be used for this, but I havn't tried.
>
> devd does not (currently) get events for suspend/resume. Maybe it
> should.
Either devd should or we do need an acpid.
Mark
--
Mark Santcroos
On Tue, Jun 17, 2003 at 10:57:32PM -0400, David Gilbert wrote:
> I have a Dell D800 laptop (as I've mentioned a few times here) and
> I've gone so far as to upgrade the BIOS to A03 and fetch new ACPI DSDT
> code from the linux site.
Please compare that one with the one posted on the list. I recall
On Wed, Jun 18, 2003 at 04:54:44PM +0200, Juan Rodriguez Hervella wrote:
> Hello!:
>
> I tried to make my Nvidia video card work yesterday, and everytime
> I launched the X system my computer hang up. So I had to
> make a hard reboot.
> (I think I will fix the Xs problem this night at home)
>
>
On Wed, Jun 18, 2003 at 08:39:12AM -0500, Thomas T. Veldhouse wrote:
> I posted this in April and received no response. However, this has been an
> ongoing issue since at least 2001 (where I found the first reference to this
> trouble via Google).
>
> The problem seems to be that the FreeBSD USB
On Wed, Jun 18, 2003 at 09:11:23AM +0200, Maikel Verheijen wrote:
> I have recently installed FreeBSD 5.1 on my Dell C800 laptop, and I get
> quite a lot (well: 48 :) of these errors on boot:
>
> ACPI-0293: *** Warning: Buffer created with zero length in AML
> -0166: *** Error: UtAlloc
This isn't really a -current issue, moving to hardware. Please strip the
Cc: in your reply.
Thus spake Gerrit K?hn ([EMAIL PROTECTED]) [18/06/03 11:20]:
> > FWIW, the best way I've seen to figure out which chip you're using (at least
> > between Ezra/Ezra-T and Nehemiah) is to look at the clockin
On Wed, Jun 18, 2003 at 11:10:49AM -0400, Damian Gerow wrote:
> > Well, all I can say is, that I bought it as "Ezra" and there is "Ezra"
> > printed on it. FreeBSD identifies it as Samuel2, though.
> And I bought my Ezra as a Nehemiah.
[...]
> So maybe they do have a way to distinguish the chip
Thus spake Gerrit K?hn ([EMAIL PROTECTED]) [18/06/03 11:00]:
> > If you have a 'Samuel2' core, then you have a Samuel2 core. It's neither
> > Ezra nor Ezra-T -- those two are the successors to Samuel2.
>
> Well, all I can say is, that I bought it as "Ezra" and there is "Ezra"
> printed on it. Fre
> On Wednesday 18 June 2003 16:05, Kenneth Culver wrote:
> > > #pciconf -l -v
> > >
> > > [EMAIL PROTECTED]:12:0:class=0x03 card=0x chip=0x002d10de
> > > rev=0x15 hdr=0x00 vendor = 'NVIDIA Corporation'
> > > device = 'NV5 TNT2 Model 64 / TNT2 Model 64 Pro'
> > >
> > > T
On Wed, Jun 18, 2003 at 10:44:17AM -0400, Damian Gerow wrote:
> I have an Ezra or an Ezra-T core (the only difference is Tualatin
> compatibility), and it produces an Unknown.
> If you have a 'Samuel2' core, then you have a Samuel2 core. It's neither
> Ezra nor Ezra-T -- those two are the succe
Hello!:
I tried to make my Nvidia video card work yesterday, and everytime
I launched the X system my computer hang up. So I had to
make a hard reboot.
(I think I will fix the Xs problem this night at home)
But I've got another weird problem. :)
The fsck of my partitions is always made on the f
I'm trying to do a make release on 5.1-RELEASE to do a custom 5.1.
CHROOTDIR=/home/custom and CVSROOT=/home/ncvs are both on a redhat nfs
server. I had some errors related to telnet, telnetd and libtelnet.
After a few makes the error went away. Now the the error is this:
cd /usr/src/release/../et
Thus spake Gerrit K?hn ([EMAIL PROTECTED]) [15/06/03 10:40]:
> > CPU: VIA/IDT Unknown (998.70-MHz 686-class CPU)
> > Origin = "CentaurHauls" Id = 0x689 Stepping = 9
> > Features=0x803035
>
> This one doesn't seem to support SSE, though I wonder why there is
> this "unknown". My C3 here is an
On Wednesday 18 June 2003 16:05, Kenneth Culver wrote:
> > #pciconf -l -v
> >
> > [EMAIL PROTECTED]:12:0:class=0x03 card=0x chip=0x002d10de
> > rev=0x15 hdr=0x00 vendor = 'NVIDIA Corporation'
> > device = 'NV5 TNT2 Model 64 / TNT2 Model 64 Pro'
> >
> > This is my video
> #pciconf -l -v
>
> [EMAIL PROTECTED]:12:0:class=0x03 card=0x chip=0x002d10de
> rev=0x15 hdr=0x00
> vendor = 'NVIDIA Corporation'
> device = 'NV5 TNT2 Model 64 / TNT2 Model 64 Pro'
>
> This is my video card, which sounds just like yours. I have it working
> fine
> I've got a PCI-NVidia Riva TNT 64 video card at home,
> and I've tried to compile the drivers but it doesn't work,
> and after changing the source to let the compilation progress,
> when the module is loaded I've received a "kernel panic".
>
> Im using FreeBSD-5.1 with XFree86-4.3, what can I do
I posted this in April and received no response. However, this has been an
ongoing issue since at least 2001 (where I found the first reference to this
trouble via Google).
The problem seems to be that the FreeBSD USB LPT driver (even with no-reset)
is somehow dropping the first bits of the data
Juan Rodriguez Hervella wrote:
Hello:
I've got a PCI-NVidia Riva TNT 64 video card at home,
and I've tried to compile the drivers but it doesn't work,
and after changing the source to let the compilation progress,
when the module is loaded I've received a "kernel panic".
Im using FreeBSD-5.1 with
On Tue, Jun 17, 2003 at 10:46:53PM -0400, David Gilbert wrote:
> I'm running 5.1-RELEASE and have USB2.0 ports in my Dell D800 laptop.
> I also have a USB2.0 drive encloseure with a 120G drive in it... so
> I'm very motivated to get this to work :).
>
> To start, I posted briefly about this before
After updating 5.1-CURRENT this morning I get the following error when
trying to build any port:
Your system is too old to use this bsd.port.mk. You need a fresh make
world or an upgrade kit. Please go to http://www.FreeBSD.org/ports/ or
a mirror site and follow the instructions.
I always do
I have just committed the GEOM_FOX class, see commit message below.
GEOM_FOX is named after the common red fox, which amongst other
traits have a liking for having multiple exits from its den.
GEOM_FOX will recognize a magic label on the device, and all devices
which come up with the same label
TB --- 2003-06-18 08:47:04 - starting CURRENT tinderbox run for sparc64/sparc64
TB --- 2003-06-18 08:47:04 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/sparc64/sparc64
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-06-18 08:49:58 - building world
TB
On Wed, Jun 18, 2003 at 02:43:43AM -0400, Jeff Roberson wrote:
> On Wed, 18 Jun 2003, Wiktor Niesiobedzki wrote:
>
> > On Tue, Jun 17, 2003 at 03:51:32PM -0400, Jeff Roberson wrote:
> > >
> > > I am still not able to reproduce this. Can you update your sources? I
> > > commited some code just no
TB --- 2003-06-18 07:46:25 - starting CURRENT tinderbox run for ia64/ia64
TB --- 2003-06-18 07:46:25 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/ia64/ia64
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-06-18 07:50:34 - building world
TB --- cd /home
On Tue, Jun 17, 2003, Peter Losher wrote:
> Hi -
>
> If this sort of question is better asked on a more specialized list
> @freebsd.org, please let me know. (Since 5.1 is still considered a
> developmental release, one doesn't know if either -current or -stable
> would be more appropriate. So I a
When I was attempting to debug a system deadlock problem where the
culprit process was sleeping on a "pool mutex", I noticed that "show
witness" in ddb doesn't report anything about this particular mutex
flavor. I discovered that witness doesn't monitor these mutexes because
mtx_pool_setup() calls
On Tue, 17 Jun 2003 02:45:18 -0400 (EDT), Jeff Roberson
<[EMAIL PROTECTED]> wrote:
My last few commits, including this one, went a long way towards
improving
ULE's interactive responsiveness under heavy load. I was just able to do
a make -j32 of my kernel while browsing the web with mozilla and
Wiktor Niesiobedzki wrote:
> On Tue, Jun 17, 2003 at 03:51:32PM -0400, Jeff Roberson wrote:
> > I am still not able to reproduce this. Can you update your sources? I
> > commited some code just now that removed an external dependency from
> > sched_nice(). This should make it more robust.
> Got
On Tue, Jun 17, 2003 at 04:21:41PM +0100, Antony T Curtis wrote:
>
> On a Compaq Armada V300 notebook, if I load the acpi module, boot fails after
> the kernel prints about half a dozen "acpi_bus_number: can't get _ADR", fails
> to detect any of the hardware and panics because of failure to moun
TB --- 2003-06-18 06:52:24 - starting CURRENT tinderbox run for i386/pc98
TB --- 2003-06-18 06:52:24 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/i386/pc98
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-06-18 06:55:06 - building world
TB --- cd /home
On Wed, 18 Jun 2003, Glenn Dawson wrote:
> I'm trying to get a Novatel Merlin for Ricochet working under -CURRENT.
> http://www.novatelwireless.com/support/support_ricochet.html
> ...
> I've noticed (in the PPP logs and when sending AT commands directly) that
> characters get dropped occasionally.
On Wed, 18 Jun 2003, 09:14+0200, Juan Rodriguez Hervella wrote:
> Hello:
>
> I've got a PCI-NVidia Riva TNT 64 video card at home,
> and I've tried to compile the drivers but it doesn't work,
> and after changing the source to let the compilation progress,
> when the module is loaded I've received
Hello:
I've got a PCI-NVidia Riva TNT 64 video card at home,
and I've tried to compile the drivers but it doesn't work,
and after changing the source to let the compilation progress,
when the module is loaded I've received a "kernel panic".
Im using FreeBSD-5.1 with XFree86-4.3, what can I do
to
Hi list!
I have recently installed FreeBSD 5.1 on my Dell C800 laptop, and I get
quite a lot (well: 48 :) of these errors on boot:
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
Are those harmfull? Is there
I'm trying to get a Novatel Merlin for Ricochet working under -CURRENT.
http://www.novatelwireless.com/support/support_ricochet.html
I've been able to connect to their network via PPP and do things like ping
and traceroute to the rest of the internet. However, when I try things
that produce larg
64 matches
Mail list logo
