Fw: SATA drive lock-up

2003-09-28 Thread Putinas
my verbose dmesg is in attached zip file, from today. my disks are connected with sata - pata converter based on marvel 88i8030 and one more question about ata3 and cable 40 wires, the cable actually is serial ata cable, not the 40 wires pata cable. and why it doesn't say then same thing about

Re: ATANG Vs. Acer chipset

2003-09-28 Thread Soren Schmidt
It seems Michael McGoldrick wrote: I haven't been able to boot a -current kernel since the ATAng import. They all die after (in a boot -v) a message from GEOM about creating ad0. If any further info would be helpful, just let me know what you need. I know there are a problem with *some* Acer

Re: Status of SCHED_ULE?

2003-09-28 Thread Morten Rodal
On Sat, Sep 27, 2003 at 11:31:25PM -0400, Jeff Roberson wrote: On Sat, 27 Sep 2003, Morten Rodal wrote: It has improved quite a bit lately, and is now also working with KSE. However, the mouse will get sluggish whenever the computer is under bursts of load (i.e. a compile) I have not

UMASS: fatal trap while unplugging floppy drive

2003-09-28 Thread Antony T Curtis
Hi I cvsupped this morning and rebuilt world and kernel... When I unplug the USB floppy drive, I get the following umass0: at uhub1 port 1 (addr 2) disconnected (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry GEOM: destroy disk da0 dp=0xc40b6450 Fatal

more panics from current (partII)

2003-09-28 Thread Tomi Vainio - Sun Finland
After adding more disks to this system it dies continously. Last two traces look quite the same. Tomppa ---clipclip--- login: kernel trap 19 with interrupts disabled NMI ... going to debugger kernel: type 19 trap, code=0 Stopped at rtcintr+0x57: callrtcin db trace rtcintr(0) at

Re: UMASS: fatal trap while unplugging floppy drive

2003-09-28 Thread Antony T Curtis
On Sun, 2003-09-28 at 11:48, John-Mark Gurney wrote: Antony T Curtis wrote this message on Sun, Sep 28, 2003 at 11:34 +0100: I cvsupped this morning and rebuilt world and kernel... When I unplug the USB floppy drive, I get the following Did you have the filesystem mounted? Right now

Re: Status of SCHED_ULE?

2003-09-28 Thread Matt
Morten Rodal wrote: On Sat, Sep 27, 2003 at 11:31:25PM -0400, Jeff Roberson wrote: On Sat, 27 Sep 2003, Morten Rodal wrote: It has improved quite a bit lately, and is now also working with KSE. However, the mouse will get sluggish whenever the computer is under bursts of load (i.e. a compile) I

Re: Status of SCHED_ULE?

2003-09-28 Thread Morten Rodal
On Sun, Sep 28, 2003 at 01:26:24PM +0100, Matt wrote: Morten Rodal wrote: On Sat, Sep 27, 2003 at 11:31:25PM -0400, Jeff Roberson wrote: On Sat, 27 Sep 2003, Morten Rodal wrote: It has improved quite a bit lately, and is now also working with KSE. However, the mouse will get sluggish

Re: Status of SCHED_ULE?

2003-09-28 Thread Matt
Morten Rodal wrote: On Sun, Sep 28, 2003 at 01:26:24PM +0100, Matt wrote: Morten Rodal wrote: On Sat, Sep 27, 2003 at 11:31:25PM -0400, Jeff Roberson wrote: On Sat, 27 Sep 2003, Morten Rodal wrote: It has improved quite a bit lately, and is now also working with KSE. However, the mouse will

Re: Status of SCHED_ULE?

2003-09-28 Thread Arjan van Leeuwen
On Sunday 28 September 2003 14:38, Matt wrote: Morten Rodal wrote: On Sun, Sep 28, 2003 at 01:26:24PM +0100, Matt wrote: Morten Rodal wrote: On Sat, Sep 27, 2003 at 11:31:25PM -0400, Jeff Roberson wrote: On Sat, 27 Sep 2003, Morten Rodal wrote: It has improved quite a bit lately, and is now

Re: Status of SCHED_ULE?

2003-09-28 Thread Alexander Langer
I have not had this experience. Can you give me details of your machine and the kind of load that causes slugishness? I'll correct it as soon as I can identify it. Using Linux-Firebird with some Java applets shows this effect, i.e. completelly bogging down X to a unusable state. Also, it's

Re: Status of SCHED_ULE?

2003-09-28 Thread Matteo Riondato
Il Dom, 2003-09-28 alle 15:45, Arjan van Leeuwen ha scritto: Ahh I tell you the other difference. I had a USB mouse when I tried ULE with 5.1-release and it stuttered. It's just a ps2 one on the current kernel where it's not stuttering. Matt. I have a PS/2 mouse, I run -CURRENT from

uplcom driver and USB modem

2003-09-28 Thread Bruce Cran
I've recently been trying to get my USB modem working in FreeBSD -CURRENT, without much success. In Linux, I can load the pl2303 driver and a ttyUSB0 device node is then used to communicate with the modem as if were attached to a serial port. In FreeBSD, I load the uplcom driver and the

Re: Status of SCHED_ULE?

2003-09-28 Thread Peter Kadau
Hi ! I have a PS/2 mouse, I run -CURRENT from 2 days ago, and I experience the stuttering too. Me too, though I have to relativize this. My configuration is UP with a pentium 4, 2.4 GHz running gnome2, evolution, mozilla and some gnome-terminals. With 4BSD, the mouse cycles through

Re: Status of SCHED_ULE?

2003-09-28 Thread Matt Douhan
On Sunday 28 September 2003 16.40, Peter Kadau wrote: Hi ! I have a PS/2 mouse, I run -CURRENT from 2 days ago, and I experience the stuttering too. Me too, though I have to relativize this. My configuration is UP with a pentium 4, 2.4 GHz running gnome2, evolution, mozilla and some

Re[2]: Sil680 RAID Support while installing 5.1-Release

2003-09-28 Thread Gabriel Ambuehl
Hello Derek, Saturday, September 27, 2003, 8:50:21 PM, you wrote: Gabriel, I experienced the same problem using 5.1 release with an Adaptec SATA Raid card that uses the SATA Sil3112A chip. With 5.1-CURRENT I can get FreeBSD to install, but the server locks-up because the disk subsystem

TEST PLEASE: if_tap patch

2003-09-28 Thread Poul-Henning Kamp
There is now also another patch http://phk.freebsd.dk/patch/if_tap.patch for the /dev/tap and /dev/vmnet driver. Please test this too, it follows the if_tun patch very closely. Please test this patch: http://phk.freebsd.dk/patch/if_tun.patch There is a slight change in

HEADSUP: Change of makedev() semantics.

2003-09-28 Thread Poul-Henning Kamp
I am in the process of adding ref-counting and locking to dev_t, and would very much prefer if we could get this step completed soon before 5-STABLE gets branched. All this will be transparent to the majority of device drivers, as the refcounting will happen in the make_dev() and destroy_dev()

Re: HEADSUP: Change of makedev() semantics.

2003-09-28 Thread Greg 'groggy' Lehey
On Sunday, 28 September 2003 at 23:22:07 +0200, Poul-Henning Kamp wrote: Basically: 3. If you do a normal device driver, cache the result from when you call make_dev(). ... ./dev/vinum Failure to cache result of make_dev() ? Where should this be cached?

Re: HEADSUP: Change of makedev() semantics.

2003-09-28 Thread Bernd Walter
On Sun, Sep 28, 2003 at 11:22:07PM +0200, Poul-Henning Kamp wrote: I am in the process of adding ref-counting and locking to dev_t, and would very much prefer if we could get this step completed soon before 5-STABLE gets branched. All this will be transparent to the majority of device

Re: HEADSUP: Change of makedev() semantics.

2003-09-28 Thread Robert Watson
On Mon, 29 Sep 2003, Greg 'groggy' Lehey wrote: On Sunday, 28 September 2003 at 23:22:07 +0200, Poul-Henning Kamp wrote: Basically: 3. If you do a normal device driver, cache the result from when you call make_dev(). ... ./dev/vinum Failure to cache

Re: HEADSUP: Change of makedev() semantics.

2003-09-28 Thread Greg 'groggy' Lehey
On Sunday, 28 September 2003 at 19:46:20 -0400, Robert Watson wrote: On Mon, 29 Sep 2003, Greg 'groggy' Lehey wrote: On Sunday, 28 September 2003 at 23:22:07 +0200, Poul-Henning Kamp wrote: Basically: 3. If you do a normal device driver, cache the result from when you call

Re: TEST PLEASE: if_tun patch

2003-09-28 Thread Brooks Davis
On Sat, Sep 27, 2003 at 11:57:19PM +0200, Poul-Henning Kamp wrote: Please test this patch: http://phk.freebsd.dk/patch/if_tun.patch There is a slight change in semantics in that the interface will disappear entirely when the /dev/tun%d device is closed. If no objections this

Re: Status of SCHED_ULE?

2003-09-28 Thread Jeff Roberson
On Sun, 28 Sep 2003, Morten Rodal wrote: On Sat, Sep 27, 2003 at 11:31:25PM -0400, Jeff Roberson wrote: On Sat, 27 Sep 2003, Morten Rodal wrote: It has improved quite a bit lately, and is now also working with KSE. However, the mouse will get sluggish whenever the computer is under

Re: Status of SCHED_ULE?

2003-09-28 Thread Jeff Roberson
On Sun, 28 Sep 2003, Arjan van Leeuwen wrote: On Sunday 28 September 2003 14:38, Matt wrote: Morten Rodal wrote: On Sun, Sep 28, 2003 at 01:26:24PM +0100, Matt wrote: Morten Rodal wrote: On Sat, Sep 27, 2003 at 11:31:25PM -0400, Jeff Roberson wrote: On Sat, 27 Sep 2003, Morten Rodal

Re: HEADSUP: Change of makedev() semantics.

2003-09-28 Thread Poul-Henning Kamp
In message [EMAIL PROTECTED], Greg 'groggy' Lehey writes: --yRA+Bmk8aPhU85Qt Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Sunday, 28 September 2003 at 23:22:07 +0200, Poul-Henning Kamp wrote: Basically: 3. If you do a normal device driver, cache the result

Re: more panics from current (partII)

2003-09-28 Thread Dag-Erling Smørgrav
Tomi Vainio - Sun Finland [EMAIL PROTECTED] writes: After adding more disks to this system it dies continously. Last two traces look quite the same. Tomppa ---clipclip--- login: kernel trap 19 with interrupts disabled NMI ... going to debugger An NMI almost certainly indicates a

Re: TEST PLEASE: if_tun patch

2003-09-28 Thread Poul-Henning Kamp
In message [EMAIL PROTECTED], Brooks Davis writes: | Properly dismantle and remove the interface and destroy the dev_t=20 | at last close of the device. I'm not convinced this is the right direction to move in. The problem is that users are beginning to expect that pseudo-interfaces be

Re: more panics from current (partII)

2003-09-28 Thread Lucas James
On Sun, 28 Sep 2003 08:27 pm, Tomi Vainio - Sun Finland wrote: After adding more disks to this system it dies continously. Last two traces look quite the same. Tomppa It could be a power supply on the way out. I had an old dual P-166 that rebooted misterously until I took out two CD-ROM