[r222277] Strange GEOM, bsdlabel and ZFS behavior
I have FreeBSD-CURRENT r77. I try to install ZFS root into MBR using manual on wiki page. There is some problem with GEOM and BSD label: # gpart create -s BSD ada0s1 # gpart add -s 192G -t freebsd-zfs ada0s1 # gpart add -t freebsd-swap ada0s1 #gpart show ada0s1 ... gpart show is work now, but not when I load zfs into memory and try to add zpool into. and when I'll boot gpart says 'GEOM: ada0s1a invalid disklabel' PS: there're too much bsdlabel devices (previous releases gives much less device nodes (there was no aa, ab, ac, ca, cb) ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: NEW_PCIB? pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff
- John Baldwin's Original Message - On Monday, June 06, 2011 9:33:30 pm John wrote: - John Baldwin's Original Message - On Sunday, June 05, 2011 8:23:53 pm John wrote: I just attempted to update an HP385G0 system from current as of 4-15-2011 to 6-2-2011. The new system will not boot, and shows the following message when it hangs: I applied your patch/rebuilt/installed/rebooted. The system seems to get farther, but still locks up tight. A screen pic is here: http://people.freebsd.org/~jwd/dmesg.jpg Hmmm, an MCA is not a good sign. Yes, there are multiple ranges. Would it be possible to use a serial port to capture a full verbose dmesg up to the point where it hangs? -- John Baldwin Hi John Yes, I did get a serial console ilo configured on the system today. I've attached two verbose consoles. The 1st is from -current as of today which fails to boot. The 2nd is from earlier this year which boot correctly. In looking at the output, I did the the following which I don't remember seeing previously, not sure if it's related: ACPI: RSDP 0xf4f20 00024 (v02 HP) ACPI: XSDT 0xf57f83e0 00044 (v01 HP A05 0002 ?? 162E) ACPI: FACP 0xf57f8460 000F4 (v03 HP A05 0002 ?? 162E) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-638) ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 (20110527/tbfadt-638) ACPI: DSDT 0xf57f8560 0422D (v01 HP DSDT 0001 MSFT 0201) Also, I tried to boot the system with ACPI disabled. The system booted farther, but then dropped into the debugger: device_attach: powernow0 attach returned 6 Device configuration finished. procfs registered panic: No usable event timer found! cpuid = 0 KDB: enter: panic [ thread pid 0 tid 10 ] Stopped at kdb_enter+0x3b: movq$0,0x8dde12(%rip) db Just another datapoint... Let me know what else I can do to help. Thanks, John Failed boot 2011-06-07 -current --- boot.config: -Dh BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 637kB/4021216kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (r...@zfscarp1p.unx.sas.com, Tue Jun 7 20:32:05 EST 2011) Loading /boot/defaults/loader.conf Warning: unable to open file /boot/loader.conf.local /boot/kernel/kernel text=0xb2e1e8 data=0x13b6a8+0x2821f0 syms=[0x8+0x102768+0x8+0xebac1] zpool_cache...failed! To get back to the menu, type `menu' and press ENTER or type `boot' and press ENTER to start FreeBSD. Type '?' for a list of commands, 'help' for more detailed help. OK lsmod 0x20: /boot/kernel/kernel (elf kernel, 0x12d9cc0) args: -v modules: x86bios.1 hptrr.1 io.1 ufs.1 kernel_mac_support.4 krpc.1 nfslockd.1 nfssvc.1 nfslock.1 wlan_sta.1 wlan_ratectl_none.1 wlan.1 wlan_wep.1 wlan_tkip.1 wlan_ccmp.1 wlan_amrr.1 if_vlan.3 if_gif.1 if_firewire.1 if_faith.1 ether.1 sysvshm.1 sysvsem.1 sysvmsg.1 firmware.1 kernel.900038 cd9660.1 isa.1 pseudofs.1 procfs.1 nfsd.1 nfscl.1 nfs.1 nfscommon.1 msdosfs.1 wpi.1 usb_quirk.1 ums.1 ukbd.1 uhid.1 ucom.1 uvscom.1 uvisor.1 uslcom.1 uplcom.1 ulpt.1 uipaq.1 uftdi.1 ubsa.1 uark.1 u3g.1 zyd.1 urtw.1 ural.1 if_upgt.1 uath.1 run.1 rum.1 uether.1 udav.1 rue.1 kue.1 cue.1 cdce.1 axe.1 aue.1 uhub.1 usb.1 usb_linux.1 urio.1 umass.1 siis.1 random.1 ppbus.1 pci.1 pccard.1 null.1 mwl.1 mvs.1 mpt_user.1 mpt_raid.1 mpt.1 mpt_cam.1 mpt_core.1 miibus.1 mfi.1 mem.1 malo.1 iwn.1 iwi.1 isp.1 ipw.1 sbp.1 fwip.1 fwe.1 firewire.1 splash.1 exca.1 dcons.2 dcons_crom.1 cardbus.1 bt.1 if_ath.1 ath_pci.1 ata_via.1 ata_sis.1 ata_sii.1 ata_serverworks.1 ata_promise.1 ata_nvidia.1 ata_netcell.1 ata_national.1 ata_micron.1 ata_marvell.1 ata_jmicron.1 ata_ite.1 ata_intel.1 ata_highpoint.1 ata_cyrix.1 ata_cypress.1 ata_cenatek.1 ata_ati.1 ata_amd.1 ata_adaptec.1 ata_ali.1 ata_acard.1 ata_ahci.1 atapci.1 ata.1 ahc.1 ahd.1 ahd_pci.1 ahc_pci.1 ahc_isa.1 ahci.1 agp.1 acpi_pci.1 acpi.1 cam.1 OK boot -v GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base= len=0009f400 SMAP type=02 base=0009f400 len=0c00 SMAP type=02 base=000f len=0001 SMAP type=01 base=0010 len=f56f8000 SMAP type=03 base=f57f8000 len=8000 SMAP type=02 base=fec0 len=1000 SMAP type=02 base=fec1 len=1000 SMAP type=02 base=fec2 len=1000 SMAP type=02 base=fdc0 len=1000 SMAP type=02 base=fdc1 len=1000 SMAP type=02 base=fee0 len=0001 SMAP type=02 base=ff80 len=0080 SMAP type=01 base=0001 len=0002f000 Table 'FACP' at 0xf57f8460 Table 'APIC' at 0xf57f8100 APIC: Found table at 0xf57f8100 APIC: Using the MADT enumerator. MADT: Found CPU APIC
Re: [r222277] Strange GEOM, bsdlabel and ZFS behavior
08.06.2011 11:10, Eir Nym wrote: gpart show is work now, but not when I load zfs into memory and try to add zpool into. and when I'll boot gpart says 'GEOM: ada0s1a invalid disklabel' Output: gpart show ada0 -- Vladislav V. Prodan VVP24-UANIC +380[67]4584408 +380[99]4060508 vla...@jabber.ru ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: [r222277] Strange GEOM, bsdlabel and ZFS behavior
On 8 June 2011 16:10, Vladislav V. Prodan univers...@ukr.net wrote: 08.06.2011 11:10, Eir Nym wrote: gpart show is work now, but not when I load zfs into memory and try to add zpool into. and when I'll boot gpart says 'GEOM: ada0s1a invalid disklabel' Output: gpart show ada0 #gpart show ada0 =63 1250263665 ada0 MBR (596G) 63 411807627 1 freebsd (196G) 411807690 54- free - (27k) 411807744 202752 2 !239 (99M) 412010496 204800 3 ntfs [active] (100M) 412215296 838045696 4 ntfs (399G) 12502609922736- free - (1.3M) #gpart show ada0s1 =0 411807627 ada0s1 BSD (196G) 0 402653247 1 freebsd-zfs (192G) 4026532479154380 2 freebsd-swap (4.4G) -- Vladislav V. Prodan VVP24-UANIC +380[67]4584408 +380[99]4060508 vla...@jabber.ru ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: IPv4 broken on r222048
On 7 June 2011 22:11, Garrett Cooper yaneg...@gmail.com wrote: On Tue, Jun 7, 2011 at 11:00 AM, Garrett Cooper yaneg...@gmail.com wrote: On Tue, Jun 7, 2011 at 10:41 AM, Bjoern A. Zeeb bzeeb-li...@lists.zabbadoz.net wrote: On Jun 7, 2011, at 5:29 PM, Garrett Cooper wrote: Hi, I'm running into an issue where ifconfig isn't executing properly, and is emitting the following message: # ifconfig re0 inet w.x.y.z ifconfig: can't set link-level netmask or broadcast # ... I haven't traced down what commit exactly is causing this, but the issue appears to be a purely userland based problem so far (I accidentally forgot to swap kernels before booting up the second time and the symptoms are exactly the same). Yes, you lost. My changes did that. You are the second to hit it. Your kernel does not have FEATURES() present and the new user space that came a couple of days later expect it and disable your IPv4 because of that. The real problem is when people update the kernel, then update world and then figure out they need to go back to kernel.old. I'll add an UPDATING entry. That I would expect, but I just built the kernel last night, installed it, and am running it right now and I run into the same issue as I do with the older kernel :). Was there any magic foo that I needed to use to get FEATURES working properly, or was it supposed to be seamless? I don't know because I never had a need to fiddle around with the framework.. Is there a tool I can use (minus banging on the interfaces in C) to determine what the features are on the machine to diagnose why things aren't working for me? Answering my own question: sysctl kern.features.inet sysctl kern.features.inet6 Hmmm... they turn up unknown OIDs. Need to do some digging to discover why that's the case.. Oh... And no UPDATING messages. It's bad practice for this features. You need an old user land or a new kernel to recover. Looks like I need an old userland, because a new kernel/userland combo doesn't seem to work as advertised :/... I have both INET and INET6 built into my kernel and userland, but my immediate upstream router only supports IPv4 right now. I tried building with WITHOUT_INET6=yes to see if it made a difference, and it didn't. I'll test any patches needed to remedy the issue. Thankfully I have flash media I can use in the meantime to push code between my two boxes :) Welcome to FreeBSD HEAD, being a developer and not following the rule;-) Sorry for the hassle though. It's ok -- that's why I have two near workstations -- one for daily use and the other for testing :). Thanks, -Garrett ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: pcib allocation failure
On Tue, Jun 7, 2011 at 4:35 PM, John Baldwin j...@freebsd.org wrote: On Monday, June 06, 2011 11:02:59 pm deeptec...@gmail.com wrote: On Mon, Jun 6, 2011 at 4:52 PM, John Baldwin j...@freebsd.org wrote: Can you try out this change. It is a possible real solution (or at least a stopgap until we start using multipass to untangle the resource mess a bit further): [snip] that doesn't work. i get an allocation failure. It is expected to still get an allocation failure. Instead what the change does is avoid updating the registers for the window until after all the devices on the bus have been probed. Were you able to save a dmesg somehow from the boot with this patch? == dmesg begins == Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #0 r222709M: Sun Jun 5 20:01:55 CEST 2011 devhc@:/usr/obj/usr/src/sys/HQ i386 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2798.71-MHz 686-class CPU) Origin = GenuineIntel Id = 0xf29 Family = f Model = 2 Stepping = 9 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE Features2=0x4400CNXT-ID,xTPR real memory = 536870912 (512 MB) avail memory = 513818624 (490 MB) Event timer LAPIC quality 400 ACPI APIC Table: A M I OEMAPIC FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 Version 2.0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: A M I OEMXSDT on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a (3) failed acpi0: reservation of 10, 1fef (3) failed Timecounter ACPI-fast frequency 3579545 Hz quality 900 acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0 cpu0: ACPI CPU on acpi0 cpu1: ACPI CPU on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 agp0: Intel 82865 host to AGP bridge on hostb0 pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0 pci1: ACPI PCI bus on pcib1 vgapci0: VGA-compatible display port 0xd000-0xd0ff mem 0xd000-0xdfff,0xf7ee-0xf7ee irq 16 at device 0.0 on pci1 drm0: ATI Radeon AP 9600 on vgapci0 info: [drm] AGP at 0xf800 64MB info: [drm] Initialized radeon 1.31.0 20080613 vgapci1: VGA-compatible display mem 0xe000-0xefff,0xf7ef-0xf7ef at device 0.1 on pci1 uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0xc880-0xc89f irq 16 at device 29.0 on pci0 usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0 uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0 usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1 ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem 0xf7dffc00-0xf7df irq 23 at device 29.7 on pci0 usbus2: EHCI version 1.0 usbus2: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0 pcib2: ACPI PCI-PCI bridge at device 30.0 on pci0 pcib2: failed to allocate initial memory window: 0xf7f0-0xfbff pci2: ACPI PCI bus on pcib2 skc0: 3Com 3C940 Gigabit Ethernet port 0xe800-0xe8ff mem 0xf7ffc000-0xf7ff irq 22 at device 5.0 on pci2 skc0: 3Com Gigabit LOM (3C940) rev. (0x1) sk0: Marvell Semiconductor, Inc. Yukon on skc0 sk0: Ethernet address: 00:0e:a6:35:15:91 miibus0: MII bus on sk0 e1000phy0: Marvell 88E1011 Gigabit PHY PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto pcm0: Creative CT5880-E port 0xec00-0xec3f irq 20 at device 12.0 on pci2 pcm0: eMicro EM28028 AC97 Codec pcm0: Playback: DAC1,DAC2 / Record: ADC isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH5 UDMA100 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 ata0: ATA channel 0 on atapci0 ata1: ATA channel 1 on atapci0 pci0: serial bus, SMBus at device 31.3 (no driver attached) acpi_button0: Power Button on acpi0 attimer0: AT timer port 0x40-0x43 irq 0 on acpi0 Timecounter i8254 frequency 1193182 Hz quality 0 Event timer i8254 frequency 1193182 Hz quality 100 atrtc0: AT realtime clock port 0x70-0x71 irq 8 on acpi0 Event timer RTC frequency 32768 Hz quality 0 atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: ISA Option ROM at iomem 0xc-0xccfff pnpid ORM on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 p4tcc0: CPU Frequency Thermal Control on cpu0 p4tcc1: CPU Frequency Thermal Control on cpu1 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0
Re: IPv4 broken on r222048
On Jun 7, 2011, at 6:15 PM, Garrett Cooper wrote: I think I just found a good recovery idea -- I should disable the features with rescue builds. That should give one a working /rescue/ifconfig in all cases and should be sufficient to recover? That would be a good backup plan so people could at least avoid painting themselves into a corner by accident. Can you confirm that http://people.freebsd.org/~bz/20110608-02-ifconfig-rescue.diff would work for you? One will still be screwed if doing it remotely without serial console or keyb access, but with that there should be a way to recover. Note that the rc scripts also check the AF to be present and will not configure them if not. Bjoern -- Bjoern A. Zeeb You have to have visions! Stop bit received. Insert coin for new address family. ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: IPv4 broken on r222048
On Jun 8, 2011, at 9:07 AM, Bjoern A. Zeeb bzeeb-li...@lists.zabbadoz.net wrote: On Jun 7, 2011, at 6:15 PM, Garrett Cooper wrote: I think I just found a good recovery idea -- I should disable the features with rescue builds. That should give one a working /rescue/ifconfig in all cases and should be sufficient to recover? That would be a good backup plan so people could at least avoid painting themselves into a corner by accident. Can you confirm that http://people.freebsd.org/~bz/20110608-02-ifconfig-rescue.diff would work for you? One will still be screwed if doing it remotely without serial console or keyb access, but with that there should be a way to recover. Note that the rc scripts also check the AF to be present and will not configure them if not. Will do when I get back home. I rebuilt world and kernel a few times, reinstalled, and I'm still running into the same issues (kern.features.inet is missing), so something is really funky with the system. I'll look at my last buildkernel log, an if that doesn't turn up anything helpful try building GENERIC tonight and boot it to see what happens.. I'll let you know how the patch goes.. Thanks! -Garrett___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: IPv4 broken on r222048
On Jun 8, 2011, at 4:25 PM, Garrett Cooper wrote: On Jun 8, 2011, at 9:07 AM, Bjoern A. Zeeb bzeeb-li...@lists.zabbadoz.net wrote: On Jun 7, 2011, at 6:15 PM, Garrett Cooper wrote: I think I just found a good recovery idea -- I should disable the features with rescue builds. That should give one a working /rescue/ifconfig in all cases and should be sufficient to recover? That would be a good backup plan so people could at least avoid painting themselves into a corner by accident. Can you confirm that http://people.freebsd.org/~bz/20110608-02-ifconfig-rescue.diff would work for you? One will still be screwed if doing it remotely without serial console or keyb access, but with that there should be a way to recover. Note that the rc scripts also check the AF to be present and will not configure them if not. Will do when I get back home. I rebuilt world and kernel a few times, reinstalled, and I'm still running into the same issues (kern.features.inet is missing), so something is really funky with the system. I'll look at my last buildkernel log, an if that doesn't turn up anything helpful try building GENERIC tonight and boot it to see what happens.. I'll let you know how the patch goes.. check with strings if you can find a __kern_features_inet /bz -- Bjoern A. Zeeb You have to have visions! Stop bit received. Insert coin for new address family. ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: NEW_PCIB? pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff
On Wednesday, June 08, 2011 12:13:05 am John wrote: - John Baldwin's Original Message - On Monday, June 06, 2011 9:33:30 pm John wrote: - John Baldwin's Original Message - On Sunday, June 05, 2011 8:23:53 pm John wrote: I just attempted to update an HP385G0 system from current as of 4-15-2011 to 6-2-2011. The new system will not boot, and shows the following message when it hangs: I applied your patch/rebuilt/installed/rebooted. The system seems to get farther, but still locks up tight. A screen pic is here: http://people.freebsd.org/~jwd/dmesg.jpg Hmmm, an MCA is not a good sign. Yes, there are multiple ranges. Would it be possible to use a serial port to capture a full verbose dmesg up to the point where it hangs? -- John Baldwin Hi John Yes, I did get a serial console ilo configured on the system today. I've attached two verbose consoles. The 1st is from -current as of today which fails to boot. The 2nd is from earlier this year which boot correctly. Humm, is the first with any patches applied? Earlier you reported a problem that occured much later (failing to allocate the initial window) but in your new dmesg it isn't getting that far. -- John Baldwin ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: 2 day GENERIC-current eat 2 CPU core at 100%
On 07.06.2011 20:12, Andrey Smagin wrote: vmstat -i interrupt total rate irq16: uhci3 205 0 irq20: hpet0 147924380 1126 irq23: uhci0 ehci0 522517 3 total148447102 1130 Tue, 7 Jun 2011 10:34:01 +0200 письмо от Hans Petter Selaskyhsela...@c2i.net: On Tuesday 07 June 2011 10:09:47 Andrey Smagin wrote: I upgraded 2 day ago from 2010-current box on Intel D525MW. System very slow down after that. kern.hz=50 in systat -vmstat - 140hpet interrupts/s at top 25% in interrupts 25% in system because hyperthreading system found 4 cpu. What does vmstat -i output? Send me please full verbose dmesg and output of the `sysctl kern.eventtimer` and `sysctl kern.timecounter`. Try to switch to another timer: sysctl kern.eventtimer.timer=LAPIC Try to switch to periodic timers (instead): sysctl kern.eventtimer.periodic=1 -- Alexander Motin ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: pcib allocation failure
On Wednesday, June 08, 2011 11:20:17 am deeptec...@gmail.com wrote:
On Tue, Jun 7, 2011 at 4:35 PM, John Baldwin j...@freebsd.org wrote:
found- vendor=0x1002, dev=0x4170, revid=0x00
domain=0, bus=1, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe000, size 28,
enabled
pcib1: attempting to grow prefetch window for
(0xe000-0xefff,0x1000)
pcib1: attempting to grow memory window for (0xe000-0xefff,0x1000)
Odd, I'm not sure why this failed. Hmm, it seems this was always failing for
you though in the older dmesg's though.
Hmmm, can you revert all your changes to pci_pci.c and try just this change:
Index: pci_pci.c
===
--- pci_pci.c (revision 222863)
+++ pci_pci.c (working copy)
@@ -953,7 +975,7 @@ pcib_grow_window(struct pcib_softc *sc, struct pci
* ok, ensure it is properly aligned for this window.
* Also check for overflow.
*/
- if (back = end start_free = back) {
+ if (back = end + 1 start_free = back) {
if (bootverbose)
printf(\tback candidate range: %#lx-%#lx\n,
start_free, back);
--
John Baldwin
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: Boot halts on Thinkpad X220 (Sandy Bridge)
On Monday, May 16, 2011 2:57:21 pm Johannes Dieterich wrote: On 05/16/2011 03:40 PM, John Baldwin wrote: On Sunday, May 15, 2011 8:09:21 pm Johannes Dieterich wrote: Hello everybody, on a Thinkpad X220 (Sandy Bridge/Cougar Point based) the installation medium loads but halts during boot. I tested the following versions of FreeBSD * 8.2-RELEASE * 9-CURRENT (latest official snapshot from 02/2011) * 9-CURRENT (latest snapshot from Nathan Whitehorn as of 20/04/2011 [1]) * 9-CURRENT (own release medium as of today prepared with the generate-release script) With 8.2, I see the same error messages as [2] with PCBSD-8 (not surprising, of course, but please note that there is no Firewire in this notebook). I do not see what the error message is with 9.0 before it halts. Anyway, according to Kris Moore this is a known issue with FreeBSD. I have not found anything about such problem in the mailing list archives (apologies if I am wrong). Therefore my question simply is, whether this problem is known and (if yes) there is a fix or workaround available for CURRENT. If needed, I can post a dmesg of a successful boot of the openSUSE-11.4-LiveCD as reference (not doing so now because I assume the list will anyway eat the attachment). Also, I can provide whatever can be obtained using said Linux. Thanks a lot or any replies! :-) Hmm, is this booting amd64 or i386? Can you try i386 if you haven't? If i386 doesn't work at first, you might need to try disabling APIC via 'set hint.apic.0.disabled=1' at the loader prompt. The i386 image as of 11/04/2011 of Nathan Whitehorn booted into the live system without problems. The hint was not needed. Please find a verbose dmesg at http://pastebin.com/4UTHsg7F Does this tell you anything? If you (or anybody else) should need anything more, just let me know how to obtain it! :-) I think this should be fixed by recent changes to the atkbd driver in HEAD by Jung-uk Kim. I'm not sure if there is a newer snapshot built yet, but perhaps you can try booting a HEAD kernel into single user mode (will probably blow up due to not liking /sbin/init) on your i386 world (would need to use a cross-build (so 'make TARGET=amd64 kernel-toolchain; make TARGET=amd64 buildkernel', etc.) as a test? -- John Baldwin ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: pcib allocation failure
On Wed, Jun 8, 2011 at 7:56 PM, John Baldwin j...@freebsd.org wrote: Hmmm, can you revert all your changes to pci_pci.c let me note that so far i had at most 1 of the (4) patches applied at a time (always the last one). if u'd like me to apply multiple patches, please send 1 combined patch. ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: [r222277] Strange GEOM, bsdlabel and ZFS behavior
08.06.2011 17:54, Eir Nym wrote: On 8 June 2011 16:10, Vladislav V. Prodanunivers...@ukr.net wrote: 08.06.2011 11:10, Eir Nym wrote: gpart show is work now, but not when I load zfs into memory and try to add zpool into. and when I'll boot gpart says 'GEOM: ada0s1a invalid disklabel' Output: gpart show ada0 #gpart show ada0 = 63 1250263665 ada0 MBR (596G) 63 411807627 1 freebsd (196G) 411807690 54- free - (27k) 411807744 202752 2 !239 (99M) 412010496 204800 3 ntfs [active] (100M) 412215296 838045696 4 ntfs (399G) 12502609922736- free - (1.3M) #gpart show ada0s1 = 0 411807627 ada0s1 BSD (196G) 0 402653247 1 freebsd-zfs (192G) 4026532479154380 2 freebsd-swap (4.4G) gpart modify -i 1 -l disk0 ada0s1 and after reboot try: zpool create tank /dev/gpt/disk0 -- Vladislav V. Prodan VVP24-UANIC +380[67]4584408 +380[99]4060508 vla...@jabber.ru ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: Boot halts on Thinkpad X220 (Sandy Bridge)
On Wednesday, June 08, 2011 2:04:36 pm John Baldwin wrote: On Monday, May 16, 2011 2:57:21 pm Johannes Dieterich wrote: On 05/16/2011 03:40 PM, John Baldwin wrote: On Sunday, May 15, 2011 8:09:21 pm Johannes Dieterich wrote: Hello everybody, on a Thinkpad X220 (Sandy Bridge/Cougar Point based) the installation medium loads but halts during boot. I tested the following versions of FreeBSD * 8.2-RELEASE * 9-CURRENT (latest official snapshot from 02/2011) * 9-CURRENT (latest snapshot from Nathan Whitehorn as of 20/04/2011 [1]) * 9-CURRENT (own release medium as of today prepared with the generate-release script) With 8.2, I see the same error messages as [2] with PCBSD-8 (not surprising, of course, but please note that there is no Firewire in this notebook). I do not see what the error message is with 9.0 before it halts. Anyway, according to Kris Moore this is a known issue with FreeBSD. I have not found anything about such problem in the mailing list archives (apologies if I am wrong). Therefore my question simply is, whether this problem is known and (if yes) there is a fix or workaround available for CURRENT. If needed, I can post a dmesg of a successful boot of the openSUSE-11.4-LiveCD as reference (not doing so now because I assume the list will anyway eat the attachment). Also, I can provide whatever can be obtained using said Linux. Thanks a lot or any replies! :-) Hmm, is this booting amd64 or i386? Can you try i386 if you haven't? If i386 doesn't work at first, you might need to try disabling APIC via 'set hint.apic.0.disabled=1' at the loader prompt. The i386 image as of 11/04/2011 of Nathan Whitehorn booted into the live system without problems. The hint was not needed. Please find a verbose dmesg at http://pastebin.com/4UTHsg7F Does this tell you anything? If you (or anybody else) should need anything more, just let me know how to obtain it! :-) I think this should be fixed by recent changes to the atkbd driver in HEAD by Jung-uk Kim. I'm not sure if there is a newer snapshot built yet, but perhaps you can try booting a HEAD kernel into single user mode (will probably blow up due to not liking /sbin/init) on your i386 world (would need to use a cross-build (so 'make TARGET=amd64 kernel-toolchain; make TARGET=amd64 buildkernel', etc.) as a test? Oh, disregard me, I missed the other replies to this thread by accident. -- John Baldwin ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: pcib allocation failure
On Wednesday, June 08, 2011 2:05:42 pm deeptec...@gmail.com wrote: On Wed, Jun 8, 2011 at 7:56 PM, John Baldwin j...@freebsd.org wrote: Hmmm, can you revert all your changes to pci_pci.c let me note that so far i had at most 1 of the (4) patches applied at a time (always the last one). if u'd like me to apply multiple patches, please send 1 combined patch. No, just the last small patch I e-mailed all by itself against a stock pci_pci.c should be fine. -- John Baldwin ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on ia64/ia64
TB --- 2011-06-08 19:05:50 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 19:05:50 - starting HEAD tinderbox run for ia64/ia64 TB --- 2011-06-08 19:05:50 - cleaning the object tree TB --- 2011-06-08 19:06:06 - cvsupping the source tree TB --- 2011-06-08 19:06:06 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/ia64/ia64/supfile TB --- 2011-06-08 19:06:23 - building world TB --- 2011-06-08 19:06:23 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 19:06:23 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 19:06:23 - TARGET=ia64 TB --- 2011-06-08 19:06:23 - TARGET_ARCH=ia64 TB --- 2011-06-08 19:06:23 - TZ=UTC TB --- 2011-06-08 19:06:23 - __MAKE_CONF=/dev/null TB --- 2011-06-08 19:06:23 - cd /src TB --- 2011-06-08 19:06:23 - /usr/bin/make -B buildworld World build started on Wed Jun 8 19:06:23 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo mca.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo! xz.lo tar.lo vi.lo id.lo chroot.lo chown.lo /obj/ia64.ia64/src/rescue/rescue/../librescue/exec.o /obj/ia64.ia64/src/rescue/rescue/../librescue/getusershell.o /obj/ia64.ia64/src/rescue/rescue/../librescue/login_class.o /obj/ia64.ia64/src/rescue/rescue/../librescue/popen.o /obj/ia64.ia64/src/rescue/rescue/../librescue/rcmdsh.o /obj/ia64.ia64/src/rescue/rescue/../librescue/sysctl.o /obj/ia64.ia64/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0xf72): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x20f2): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x2342): undefined reference to `sec2str' *** Error code 1 Stop in /obj/ia64.ia64/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 20:10:15 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 20:10:15 - ERROR: failed to build world TB --- 2011-06-08 20:10:15 - 3027.23 user 597.51 system 3864.58 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-ia64-ia64.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: pcib allocation failure
On Wed, Jun 8, 2011 at 7:56 PM, John Baldwin j...@freebsd.org wrote:
On Wednesday, June 08, 2011 11:20:17 am deeptec...@gmail.com wrote:
On Tue, Jun 7, 2011 at 4:35 PM, John Baldwin j...@freebsd.org wrote:
found- vendor=0x1002, dev=0x4170, revid=0x00
domain=0, bus=1, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe000, size 28,
enabled
pcib1: attempting to grow prefetch window for
(0xe000-0xefff,0x1000)
pcib1: attempting to grow memory window for
(0xe000-0xefff,0x1000)
Odd, I'm not sure why this failed. Hmm, it seems this was always failing for
you though in the older dmesg's though.
Hmmm, can you revert all your changes to pci_pci.c and try just this change:
Index: pci_pci.c
===
--- pci_pci.c (revision 222863)
+++ pci_pci.c (working copy)
@@ -953,7 +975,7 @@ pcib_grow_window(struct pcib_softc *sc, struct pci
* ok, ensure it is properly aligned for this window.
* Also check for overflow.
*/
- if (back = end start_free = back) {
+ if (back = end + 1 start_free = back) {
if (bootverbose)
printf(\tback candidate range: %#lx-%#lx\n,
start_free, back);
failure.
== dmesg begins ==
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r222709M: Sun Jun 5 20:01:55 CEST 2011
devhc@:/usr/obj/usr/src/sys/HQ i386
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2798.72-MHz 686-class CPU)
Origin = GenuineIntel Id = 0xf29 Family = f Model = 2 Stepping = 9
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
Features2=0x4400CNXT-ID,xTPR
real memory = 536870912 (512 MB)
avail memory = 513818624 (490 MB)
Event timer LAPIC quality 400
ACPI APIC Table: A M I OEMAPIC
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 Version 2.0 irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: A M I OEMXSDT on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a (3) failed
acpi0: reservation of 10, 1fef (3) failed
Timecounter ACPI-fast frequency 3579545 Hz quality 900
acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0
cpu0: ACPI CPU on acpi0
cpu1: ACPI CPU on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
agp0: Intel 82865 host to AGP bridge on hostb0
pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0
pci1: ACPI PCI bus on pcib1
vgapci0: VGA-compatible display port 0xd000-0xd0ff mem
0xd000-0xdfff,0xf7ee-0xf7ee irq 16 at device 0.0 on
pci1
drm0: ATI Radeon AP 9600 on vgapci0
info: [drm] AGP at 0xf800 64MB
info: [drm] Initialized radeon 1.31.0 20080613
vgapci1: VGA-compatible display mem
0xe000-0xefff,0xf7ef-0xf7ef at device 0.1 on pci1
uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0xc880-0xc89f
irq 16 at device 29.0 on pci0
usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0
uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0xcc00-0xcc1f
irq 19 at device 29.1 on pci0
usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1
ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem
0xf7dffc00-0xf7df irq 23 at device 29.7 on pci0
usbus2: EHCI version 1.0
usbus2: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0
pcib2: ACPI PCI-PCI bridge at device 30.0 on pci0
pcib2: failed to allocate initial memory window: 0xf7f0-0xfbff
pci2: ACPI PCI bus on pcib2
skc0: 3Com 3C940 Gigabit Ethernet port 0xe800-0xe8ff mem
0xf7ffc000-0xf7ff irq 22 at device 5.0 on pci2
skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
sk0: Marvell Semiconductor, Inc. Yukon on skc0
sk0: Ethernet address: 00:0e:a6:35:15:91
miibus0: MII bus on sk0
e1000phy0: Marvell 88E1011 Gigabit PHY PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
pcm0: Creative CT5880-E port 0xec00-0xec3f irq 20 at device 12.0 on pci2
pcm0: eMicro EM28028 AC97 Codec
pcm0: Playback: DAC1,DAC2 / Record: ADC
isab0: PCI-ISA bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel ICH5 UDMA100 controller port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
pci0
ata0:
[head tinderbox] failure on mips/mips
TB --- 2011-06-08 19:59:18 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 19:59:18 - starting HEAD tinderbox run for mips/mips TB --- 2011-06-08 19:59:18 - cleaning the object tree TB --- 2011-06-08 19:59:24 - cvsupping the source tree TB --- 2011-06-08 19:59:24 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/mips/mips/supfile TB --- 2011-06-08 20:00:14 - building world TB --- 2011-06-08 20:00:14 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 20:00:14 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 20:00:14 - TARGET=mips TB --- 2011-06-08 20:00:14 - TARGET_ARCH=mips TB --- 2011-06-08 20:00:14 - TZ=UTC TB --- 2011-06-08 20:00:14 - __MAKE_CONF=/dev/null TB --- 2011-06-08 20:00:14 - cd /src TB --- 2011-06-08 20:00:14 - /usr/bin/make -B buildworld World build started on Wed Jun 8 20:00:15 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo xz.lo ! tar.lo vi.lo id.lo chroot.lo chown.lo /obj/mips.mipsel/src/rescue/rescue/../librescue/exec.o /obj/mips.mipsel/src/rescue/rescue/../librescue/getusershell.o /obj/mips.mipsel/src/rescue/rescue/../librescue/login_class.o /obj/mips.mipsel/src/rescue/rescue/../librescue/popen.o /obj/mips.mipsel/src/rescue/rescue/../librescue/rcmdsh.o /obj/mips.mipsel/src/rescue/rescue/../librescue/sysctl.o /obj/mips.mipsel/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0xb04): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x189c): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x1bfc): undefined reference to `sec2str' *** Error code 1 Stop in /obj/mips.mipsel/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 20:46:57 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 20:46:57 - ERROR: failed to build world TB --- 2011-06-08 20:46:57 - 2027.04 user 525.98 system 2859.66 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-mips-mips.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on powerpc64/powerpc
TB --- 2011-06-08 20:32:48 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 20:32:48 - starting HEAD tinderbox run for powerpc64/powerpc TB --- 2011-06-08 20:32:48 - cleaning the object tree TB --- 2011-06-08 20:33:08 - cvsupping the source tree TB --- 2011-06-08 20:33:08 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc64/powerpc/supfile TB --- 2011-06-08 20:33:22 - building world TB --- 2011-06-08 20:33:22 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 20:33:22 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 20:33:22 - TARGET=powerpc TB --- 2011-06-08 20:33:22 - TARGET_ARCH=powerpc64 TB --- 2011-06-08 20:33:22 - TZ=UTC TB --- 2011-06-08 20:33:22 - __MAKE_CONF=/dev/null TB --- 2011-06-08 20:33:22 - cd /src TB --- 2011-06-08 20:33:22 - /usr/bin/make -B buildworld World build started on Wed Jun 8 20:33:23 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] (cd /src/rescue/rescue/../../usr.sbin/chroot /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chroot/ depend /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chroot/ chroot.o) `chroot.o' is up to date. (cd /src/rescue/rescue/../../usr.sbin/chown /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ depend /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ chown.o) `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo xz.lo ! tar.lo vi.lo id.lo chroot.lo chown.lo /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/exec.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/getusershell.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/login_class.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/popen.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/rcmdsh.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/sysctl.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo:(.text+0x838): undefined reference to `sec2str' rtsol.lo:(.text+0xf5c): undefined reference to `sec2str' rtsol.lo:(.text+0x1098): undefined reference to `sec2str' *** Error code 1 Stop in /obj/powerpc.powerpc64/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 21:24:30 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 21:24:30 - ERROR: failed to build world TB --- 2011-06-08 21:24:30 - 2459.51 user 537.30 system 3101.97 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-powerpc64-powerpc.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: ZFS panic with concurrent recv and read-heavy workload
On Fri, Jun 03, 2011 at 03:03:56AM -0400, Nathaniel W Filardo wrote: I just got this on another machine, no heavy workload needed, just booting and starting some jails. Of interest, perhaps, both this and the machine triggering the below panic are SMP V240s with 1.5GHz CPUs (though I will confess that the machine in the original report may have had bad RAM). I have run a UP 1.2GHz V240 for months and never seen this panic. This time the kernel is FreeBSD 9.0-CURRENT #9: Fri Jun 3 02:32:13 EDT 2011 csup'd immediately before building. The full panic this time is panic: Lock buf_hash_table.ht_locks[i].ht_lock not exclusively locked @ /usr/src/sys/modules/zfs/../../cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:4659 cpuid = 1 KDB: stack backtrace: panic() at panic+0x1c8 _sx_assert() at _sx_assert+0xc4 _sx_xunlock() at _sx_xunlock+0x98 l2arc_feed_thread() at l2arc_feed_thread+0xeac fork_exit() at fork_exit+0x9c fork_trampoline() at fork_trampoline+0x8 SC Alert: SC Request to send Break to host. KDB: enter: Line break on console [ thread pid 27 tid 100121 ] Stopped at kdb_enter+0x80: ta %xcc, 1 db reset ttiimmeeoouutt sshhuuiinngg ddoowwnn CCPPUUss.. Half of the memory in this machine is new (well, came with the machine) and half is from the aforementioned UP V240 which seemed to work fine (I was attempting an upgrade when this happened); none of it (or indeed any of the hardware save the disk controller and disks) are common between this and the machine reporting below. Thoughts? Any help would be greatly appreciated. Thanks. --nwf; On Wed, Apr 06, 2011 at 04:00:43AM -0400, Nathaniel W Filardo wrote: [...] panic: Lock buf_hash_table.ht_locks[i].ht_lock not exclusively locked @ /usr/src/sys/modules/zfs/../../cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:1869 cpuid = 1 KDB: stack backtrace: panic() at panic+0x1c8 _sx_assert() at _sx_assert+0xc4 _sx_xunlock() at _sx_xunlock+0x98 arc_evict() at arc_evict+0x614 arc_get_data_buf() at arc_get_data_buf+0x360 arc_buf_alloc() at arc_buf_alloc+0x94 dmu_buf_will_fill() at dmu_buf_will_fill+0xfc dmu_write() at dmu_write+0xec dmu_recv_stream() at dmu_recv_stream+0x8a8 zfs_ioc_recv() at zfs_ioc_recv+0x354 zfsdev_ioctl() at zfsdev_ioctl+0xe0 devfs_ioctl_f() at devfs_ioctl_f+0xe8 kern_ioctl() at kern_ioctl+0x294 ioctl() at ioctl+0x198 syscallenter() at syscallenter+0x270 syscall() at syscall+0x74 -- syscall (54, FreeBSD ELF64, ioctl) %o7=0x40c13e24 -- userland() at 0x40e72cc8 user trace: trap %o7=0x40c13e24 pc 0x40e72cc8, sp 0x7fd4641 pc 0x40c158f4, sp 0x7fd4721 pc 0x40c1e878, sp 0x7fd47f1 pc 0x40c1ce54, sp 0x7fd8b01 pc 0x40c1dbe0, sp 0x7fd9431 pc 0x40c1f718, sp 0x7fdd741 pc 0x10731c, sp 0x7fdd831 pc 0x10c90c, sp 0x7fdd8f1 pc 0x103ef0, sp 0x7fde1d1 pc 0x4021aff4, sp 0x7fde291 done [...] Apparently this is a locking issue in the ARC code, the ZFS people should be able to help you. Marius ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on sparc64/sparc64
TB --- 2011-06-08 20:46:58 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 20:46:58 - starting HEAD tinderbox run for sparc64/sparc64 TB --- 2011-06-08 20:46:58 - cleaning the object tree TB --- 2011-06-08 20:47:14 - cvsupping the source tree TB --- 2011-06-08 20:47:14 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/sparc64/sparc64/supfile TB --- 2011-06-08 20:47:28 - building world TB --- 2011-06-08 20:47:28 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 20:47:28 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 20:47:28 - TARGET=sparc64 TB --- 2011-06-08 20:47:28 - TARGET_ARCH=sparc64 TB --- 2011-06-08 20:47:28 - TZ=UTC TB --- 2011-06-08 20:47:28 - __MAKE_CONF=/dev/null TB --- 2011-06-08 20:47:28 - cd /src TB --- 2011-06-08 20:47:28 - /usr/bin/make -B buildworld World build started on Wed Jun 8 20:47:29 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo bsdlabel.lo sunlabel.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo! gzip.lo bzip2.lo xz.lo tar.lo vi.lo id.lo chroot.lo chown.lo /obj/sparc64.sparc64/src/rescue/rescue/../librescue/exec.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/getusershell.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/login_class.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/popen.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/rcmdsh.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/sysctl.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0x8f8): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xf8c): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x1094): undefined reference to `sec2str' *** Error code 1 Stop in /obj/sparc64.sparc64/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 21:32:44 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 21:32:44 - ERROR: failed to build world TB --- 2011-06-08 21:32:44 - 2236.59 user 505.78 system 2746.22 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-sparc64-sparc64.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on powerpc/powerpc
TB --- 2011-06-08 20:10:16 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 20:10:16 - starting HEAD tinderbox run for powerpc/powerpc TB --- 2011-06-08 20:10:16 - cleaning the object tree TB --- 2011-06-08 20:10:28 - cvsupping the source tree TB --- 2011-06-08 20:10:28 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile TB --- 2011-06-08 20:10:43 - building world TB --- 2011-06-08 20:10:43 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 20:10:43 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 20:10:43 - TARGET=powerpc TB --- 2011-06-08 20:10:43 - TARGET_ARCH=powerpc TB --- 2011-06-08 20:10:43 - TZ=UTC TB --- 2011-06-08 20:10:43 - __MAKE_CONF=/dev/null TB --- 2011-06-08 20:10:43 - cd /src TB --- 2011-06-08 20:10:43 - /usr/bin/make -B buildworld World build started on Wed Jun 8 20:10:43 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo xz.lo ! tar.lo vi.lo id.lo chroot.lo chown.lo /obj/powerpc.powerpc/src/rescue/rescue/../librescue/exec.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/getusershell.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/login_class.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/popen.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/rcmdsh.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/sysctl.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0x86c): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xf90): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x10d0): undefined reference to `sec2str' *** Error code 1 Stop in /obj/powerpc.powerpc/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 21:40:34 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 21:40:34 - ERROR: failed to build world TB --- 2011-06-08 21:40:34 - 4509.32 user 745.87 system 5417.91 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-powerpc-powerpc.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on arm/arm
TB --- 2011-06-08 21:50:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 21:50:00 - starting HEAD tinderbox run for arm/arm TB --- 2011-06-08 21:50:00 - cleaning the object tree TB --- 2011-06-08 21:50:16 - cvsupping the source tree TB --- 2011-06-08 21:50:16 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/arm/arm/supfile TB --- 2011-06-08 21:50:35 - building world TB --- 2011-06-08 21:50:35 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 21:50:35 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 21:50:35 - TARGET=arm TB --- 2011-06-08 21:50:35 - TARGET_ARCH=arm TB --- 2011-06-08 21:50:35 - TZ=UTC TB --- 2011-06-08 21:50:35 - __MAKE_CONF=/dev/null TB --- 2011-06-08 21:50:35 - cd /src TB --- 2011-06-08 21:50:35 - /usr/bin/make -B buildworld World build started on Wed Jun 8 21:50:39 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chroot.o' is up to date. (cd /src/rescue/rescue/../../usr.sbin/chown /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ depend /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ chown.o) `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo xz.lo ! tar.lo vi.lo id.lo chroot.lo chown.lo /obj/arm.arm/src/rescue/rescue/../librescue/exec.o /obj/arm.arm/src/rescue/rescue/../librescue/getusershell.o /obj/arm.arm/src/rescue/rescue/../librescue/login_class.o /obj/arm.arm/src/rescue/rescue/../librescue/popen.o /obj/arm.arm/src/rescue/rescue/../librescue/rcmdsh.o /obj/arm.arm/src/rescue/rescue/../librescue/sysctl.o /obj/arm.arm/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo $a': _$$hide$$ rtsol.lo rtsock.c:(.text+0x790): undefined reference to `sec2str' _$$hide$$ rtsol.lo rtsock.c:(.text+0x11b4): undefined reference to `sec2str' _$$hide$$ rtsol.lo rtsock.c:(.text+0x1468): undefined reference to `sec2str' *** Error code 1 Stop in /obj/arm.arm/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 22:34:15 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 22:34:15 - ERROR: failed to build world TB --- 2011-06-08 22:34:15 - 1913.57 user 562.59 system 2655.00 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-arm-arm.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: NEW_PCIB? pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff
- John Baldwin's Original Message - On Wednesday, June 08, 2011 12:13:05 am John wrote: - John Baldwin's Original Message - On Monday, June 06, 2011 9:33:30 pm John wrote: - John Baldwin's Original Message - On Sunday, June 05, 2011 8:23:53 pm John wrote: I just attempted to update an HP385G0 system from current as of 4-15-2011 to 6-2-2011. The new system will not boot, and shows the following message when it hangs: I applied your patch/rebuilt/installed/rebooted. The system seems to get farther, but still locks up tight. A screen pic is here: http://people.freebsd.org/~jwd/dmesg.jpg Hmmm, an MCA is not a good sign. Yes, there are multiple ranges. Would it be possible to use a serial port to capture a full verbose dmesg up to the point where it hangs? -- John Baldwin Hi John Yes, I did get a serial console ilo configured on the system today. I've attached two verbose consoles. The 1st is from -current as of today which fails to boot. The 2nd is from earlier this year which boot correctly. Humm, is the first with any patches applied? Earlier you reported a problem that occured much later (failing to allocate the initial window) but in your new dmesg it isn't getting that far. Sorry John, here's the verbose dmesg output with your patch applied. This is at the tail of the console: pcib1: allocated memory range (0xf600-0xf6ff) for rid 10 of pci0:1:3:0 map[14]: type I/O Port, range 32, base 0x4400, size 8, enabled pcib1: failed to allocate initial I/O port window (0x4000-0x4fff,0x1000) map[18]: type Memory, range 32, base 0xf5ff, size 12, enabled Output ends with a single 'M', not MCA as earlier. -John /boot/kernel/kernel text=0xb2e368 data=0x13b6a8+0x2821f0 syms=[0x8+0x102780+0x8+0xebad3] OK boot -v GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=01 base= len=0009f400 SMAP type=02 base=0009f400 len=0c00 SMAP type=02 base=000f len=0001 SMAP type=01 base=0010 len=f56f8000 SMAP type=03 base=f57f8000 len=8000 SMAP type=02 base=fec0 len=1000 SMAP type=02 base=fec1 len=1000 SMAP type=02 base=fec2 len=1000 SMAP type=02 base=fdc0 len=1000 SMAP type=02 base=fdc1 len=1000 SMAP type=02 base=fee0 len=0001 SMAP type=02 base=ff80 len=0080 SMAP type=01 base=0001 len=0002f000 Table 'FACP' at 0xf57f8460 Table 'APIC' at 0xf57f8100 APIC: Found table at 0xf57f8100 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled MADT: Found CPU APIC ID 4 ACPI ID 4: disabled MADT: Found CPU APIC ID 5 ACPI ID 5: disabled MADT: Found CPU APIC ID 6 ACPI ID 6: disabled MADT: Found CPU APIC ID 7 ACPI ID 7: disabled Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-CURRENT #1: Wed Jun 8 16:33:48 EST 2011 r...@zfscarp1p.unx.sas.com:/usr/obj/usr/src.2011-06-07_1.00/sys/GENERIC amd64 WARNING: WITNESS option enabled, expect reduced performance. Table 'FACP' at 0xf57f8460 Table 'APIC' at 0xf57f8100 Table 'SPCR' at 0xf57f81e0 Table 'SRAT' at 0xf57f8260 SRAT: Found table at 0xf57f8260 SRAT: Found CPU APIC ID 0 domain 1: enabled SRAT: Found CPU APIC ID 1 domain 2: enabled SRAT: Found CPU APIC ID 2 domain 3: disabled SRAT: Found CPU APIC ID 3 domain 4: disabled SRAT: Found CPU APIC ID 4 domain 1: disabled SRAT: Found CPU APIC ID 5 domain 2: disabled SRAT: Found CPU APIC ID 6 domain 3: disabled SRAT: Found CPU APIC ID 7 domain 4: disabled SRAT: Found memory domain 1 addr 0 len 2: enabled SRAT: Found memory domain 2 addr 2 len 2: enabled SRAT: Found memory domain 3 addr 0 len 0: disabled SRAT: Found memory domain 4 addr 0 len 0: disabled Preloaded elf kernel /boot/kernel/kernel at 0x814db000. Calibrating TSC clock ... TSC clock: 2605970896 Hz CPU: AMD Opteron(tm) Processor 252 (2605.97-MHz K8-class CPU) Origin = AuthenticAMD Id = 0x20f51 Family = f Model = 25 Stepping = 1 Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2 Features2=0x1SSE3 AMD Features=0xe2500800SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow! L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data
[head tinderbox] failure on amd64/amd64
TB --- 2011-06-08 21:50:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 21:50:00 - starting HEAD tinderbox run for amd64/amd64 TB --- 2011-06-08 21:50:00 - cleaning the object tree TB --- 2011-06-08 21:50:22 - cvsupping the source tree TB --- 2011-06-08 21:50:22 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/amd64/amd64/supfile TB --- 2011-06-08 21:50:42 - building world TB --- 2011-06-08 21:50:42 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 21:50:42 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 21:50:42 - TARGET=amd64 TB --- 2011-06-08 21:50:42 - TARGET_ARCH=amd64 TB --- 2011-06-08 21:50:42 - TZ=UTC TB --- 2011-06-08 21:50:42 - __MAKE_CONF=/dev/null TB --- 2011-06-08 21:50:42 - cd /src TB --- 2011-06-08 21:50:42 - /usr/bin/make -B buildworld World build started on Wed Jun 8 21:50:43 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] (cd /src/rescue/rescue/../../usr.sbin/chown /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ depend /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ chown.o) `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo bsdlabel.lo fdisk.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gz! ip.lo bzip2.lo xz.lo tar.lo vi.lo id.lo chroot.lo chown.lo /obj/src/rescue/rescue/../librescue/exec.o /obj/src/rescue/rescue/../librescue/getusershell.o /obj/src/rescue/rescue/../librescue/login_class.o /obj/src/rescue/rescue/../librescue/popen.o /obj/src/rescue/rescue/../librescue/rcmdsh.o /obj/src/rescue/rescue/../librescue/sysctl.o /obj/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `rtsol_timer_update': rtsock.c:(.text+0x6aa): undefined reference to `sec2str' rtsol.lo: In function `main': rtsock.c:(.text+0xcf5): undefined reference to `sec2str' rtsock.c:(.text+0xe29): undefined reference to `sec2str' *** Error code 1 Stop in /obj/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 23:32:40 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 23:32:40 - ERROR: failed to build world TB --- 2011-06-08 23:32:40 - 5042.34 user 814.25 system 6160.23 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-amd64-amd64.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on i386/pc98
TB --- 2011-06-08 21:50:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 21:50:00 - starting HEAD tinderbox run for i386/pc98 TB --- 2011-06-08 21:50:00 - cleaning the object tree TB --- 2011-06-08 21:50:18 - cvsupping the source tree TB --- 2011-06-08 21:50:18 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/i386/pc98/supfile TB --- 2011-06-08 21:50:35 - building world TB --- 2011-06-08 21:50:35 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 21:50:35 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 21:50:35 - TARGET=pc98 TB --- 2011-06-08 21:50:35 - TARGET_ARCH=i386 TB --- 2011-06-08 21:50:35 - TZ=UTC TB --- 2011-06-08 21:50:35 - __MAKE_CONF=/dev/null TB --- 2011-06-08 21:50:35 - cd /src TB --- 2011-06-08 21:50:35 - /usr/bin/make -B buildworld World build started on Wed Jun 8 21:50:39 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo bsdlabel.lo sconfig.lo fdisk.lo dhclient.lo head.lo mt.lo sed.lo tail.l! o tee.lo gzip.lo bzip2.lo xz.lo tar.lo vi.lo id.lo chroot.lo chown.lo /obj/pc98.i386/src/rescue/rescue/../librescue/exec.o /obj/pc98.i386/src/rescue/rescue/../librescue/getusershell.o /obj/pc98.i386/src/rescue/rescue/../librescue/login_class.o /obj/pc98.i386/src/rescue/rescue/../librescue/popen.o /obj/pc98.i386/src/rescue/rescue/../librescue/rcmdsh.o /obj/pc98.i386/src/rescue/rescue/../librescue/sysctl.o /obj/pc98.i386/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0x605): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xc65): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xd90): undefined reference to `sec2str' *** Error code 1 Stop in /obj/pc98.i386/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 23:32:45 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 23:32:45 - ERROR: failed to build world TB --- 2011-06-08 23:32:46 - 5036.76 user 821.18 system 6165.45 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-i386-pc98.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on i386/i386
TB --- 2011-06-08 21:50:00 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 21:50:00 - starting HEAD tinderbox run for i386/i386 TB --- 2011-06-08 21:50:00 - cleaning the object tree TB --- 2011-06-08 21:50:23 - cvsupping the source tree TB --- 2011-06-08 21:50:23 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/i386/i386/supfile TB --- 2011-06-08 21:55:47 - building world TB --- 2011-06-08 21:55:47 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 21:55:47 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 21:55:47 - TARGET=i386 TB --- 2011-06-08 21:55:47 - TARGET_ARCH=i386 TB --- 2011-06-08 21:55:47 - TZ=UTC TB --- 2011-06-08 21:55:47 - __MAKE_CONF=/dev/null TB --- 2011-06-08 21:55:47 - cd /src TB --- 2011-06-08 21:55:47 - /usr/bin/make -B buildworld World build started on Wed Jun 8 21:55:47 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo bsdlabel.lo sconfig.lo fdisk.lo dhclient.lo head.lo mt.lo sed.lo tail.l! o tee.lo gzip.lo bzip2.lo xz.lo tar.lo vi.lo id.lo chroot.lo chown.lo /obj/i386.i386/src/rescue/rescue/../librescue/exec.o /obj/i386.i386/src/rescue/rescue/../librescue/getusershell.o /obj/i386.i386/src/rescue/rescue/../librescue/login_class.o /obj/i386.i386/src/rescue/rescue/../librescue/popen.o /obj/i386.i386/src/rescue/rescue/../librescue/rcmdsh.o /obj/i386.i386/src/rescue/rescue/../librescue/sysctl.o /obj/i386.i386/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0x605): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xc65): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xd90): undefined reference to `sec2str' *** Error code 1 Stop in /obj/i386.i386/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 23:38:52 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 23:38:52 - ERROR: failed to build world TB --- 2011-06-08 23:38:52 - 5060.83 user 796.97 system 6531.77 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-i386-i386.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on ia64/ia64
TB --- 2011-06-08 22:34:16 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 22:34:16 - starting HEAD tinderbox run for ia64/ia64 TB --- 2011-06-08 22:34:16 - cleaning the object tree TB --- 2011-06-08 22:34:21 - cvsupping the source tree TB --- 2011-06-08 22:34:21 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/ia64/ia64/supfile TB --- 2011-06-08 22:34:34 - building world TB --- 2011-06-08 22:34:34 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 22:34:34 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 22:34:34 - TARGET=ia64 TB --- 2011-06-08 22:34:34 - TARGET_ARCH=ia64 TB --- 2011-06-08 22:34:34 - TZ=UTC TB --- 2011-06-08 22:34:34 - __MAKE_CONF=/dev/null TB --- 2011-06-08 22:34:34 - cd /src TB --- 2011-06-08 22:34:34 - /usr/bin/make -B buildworld World build started on Wed Jun 8 22:34:35 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo mca.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo! xz.lo tar.lo vi.lo id.lo chroot.lo chown.lo /obj/ia64.ia64/src/rescue/rescue/../librescue/exec.o /obj/ia64.ia64/src/rescue/rescue/../librescue/getusershell.o /obj/ia64.ia64/src/rescue/rescue/../librescue/login_class.o /obj/ia64.ia64/src/rescue/rescue/../librescue/popen.o /obj/ia64.ia64/src/rescue/rescue/../librescue/rcmdsh.o /obj/ia64.ia64/src/rescue/rescue/../librescue/sysctl.o /obj/ia64.ia64/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0xf72): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x20f2): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x2342): undefined reference to `sec2str' *** Error code 1 Stop in /obj/ia64.ia64/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-08 23:40:16 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-08 23:40:16 - ERROR: failed to build world TB --- 2011-06-08 23:40:16 - 3108.94 user 584.51 system 3960.23 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-ia64-ia64.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on mips/mips
TB --- 2011-06-08 23:32:41 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 23:32:41 - starting HEAD tinderbox run for mips/mips TB --- 2011-06-08 23:32:41 - cleaning the object tree TB --- 2011-06-08 23:32:46 - cvsupping the source tree TB --- 2011-06-08 23:32:46 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/mips/mips/supfile TB --- 2011-06-08 23:33:00 - building world TB --- 2011-06-08 23:33:00 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 23:33:00 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 23:33:00 - TARGET=mips TB --- 2011-06-08 23:33:00 - TARGET_ARCH=mips TB --- 2011-06-08 23:33:00 - TZ=UTC TB --- 2011-06-08 23:33:00 - __MAKE_CONF=/dev/null TB --- 2011-06-08 23:33:00 - cd /src TB --- 2011-06-08 23:33:00 - /usr/bin/make -B buildworld World build started on Wed Jun 8 23:33:00 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo xz.lo ! tar.lo vi.lo id.lo chroot.lo chown.lo /obj/mips.mipsel/src/rescue/rescue/../librescue/exec.o /obj/mips.mipsel/src/rescue/rescue/../librescue/getusershell.o /obj/mips.mipsel/src/rescue/rescue/../librescue/login_class.o /obj/mips.mipsel/src/rescue/rescue/../librescue/popen.o /obj/mips.mipsel/src/rescue/rescue/../librescue/rcmdsh.o /obj/mips.mipsel/src/rescue/rescue/../librescue/sysctl.o /obj/mips.mipsel/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0xb04): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x189c): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x1bfc): undefined reference to `sec2str' *** Error code 1 Stop in /obj/mips.mipsel/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-09 00:19:38 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-09 00:19:38 - ERROR: failed to build world TB --- 2011-06-09 00:19:38 - 2037.37 user 535.30 system 2816.45 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-mips-mips.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on sparc64/sparc64
TB --- 2011-06-08 23:40:16 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 23:40:16 - starting HEAD tinderbox run for sparc64/sparc64 TB --- 2011-06-08 23:40:16 - cleaning the object tree TB --- 2011-06-08 23:40:24 - cvsupping the source tree TB --- 2011-06-08 23:40:24 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/sparc64/sparc64/supfile TB --- 2011-06-08 23:40:36 - building world TB --- 2011-06-08 23:40:36 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 23:40:36 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 23:40:36 - TARGET=sparc64 TB --- 2011-06-08 23:40:36 - TARGET_ARCH=sparc64 TB --- 2011-06-08 23:40:36 - TZ=UTC TB --- 2011-06-08 23:40:36 - __MAKE_CONF=/dev/null TB --- 2011-06-08 23:40:36 - cd /src TB --- 2011-06-08 23:40:36 - /usr/bin/make -B buildworld World build started on Wed Jun 8 23:40:37 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo bsdlabel.lo sunlabel.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo! gzip.lo bzip2.lo xz.lo tar.lo vi.lo id.lo chroot.lo chown.lo /obj/sparc64.sparc64/src/rescue/rescue/../librescue/exec.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/getusershell.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/login_class.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/popen.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/rcmdsh.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/sysctl.o /obj/sparc64.sparc64/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0x8f8): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xf8c): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x1094): undefined reference to `sec2str' *** Error code 1 Stop in /obj/sparc64.sparc64/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-09 00:30:50 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-09 00:30:50 - ERROR: failed to build world TB --- 2011-06-09 00:30:50 - 2309.87 user 534.16 system 3033.80 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-sparc64-sparc64.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on powerpc64/powerpc
TB --- 2011-06-08 23:38:52 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 23:38:52 - starting HEAD tinderbox run for powerpc64/powerpc TB --- 2011-06-08 23:38:52 - cleaning the object tree TB --- 2011-06-08 23:38:57 - cvsupping the source tree TB --- 2011-06-08 23:38:57 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc64/powerpc/supfile TB --- 2011-06-08 23:39:09 - building world TB --- 2011-06-08 23:39:09 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 23:39:09 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 23:39:09 - TARGET=powerpc TB --- 2011-06-08 23:39:09 - TARGET_ARCH=powerpc64 TB --- 2011-06-08 23:39:09 - TZ=UTC TB --- 2011-06-08 23:39:09 - __MAKE_CONF=/dev/null TB --- 2011-06-08 23:39:09 - cd /src TB --- 2011-06-08 23:39:09 - /usr/bin/make -B buildworld World build started on Wed Jun 8 23:39:10 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] (cd /src/rescue/rescue/../../usr.sbin/chroot /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chroot/ depend /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chroot/ chroot.o) `chroot.o' is up to date. (cd /src/rescue/rescue/../../usr.sbin/chown /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ depend /usr/bin/make -DRESCUE CRUNCH_CFLAGS=-DRESCUE DIRPRFX=rescue/rescue/chown/ chown.o) `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo xz.lo ! tar.lo vi.lo id.lo chroot.lo chown.lo /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/exec.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/getusershell.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/login_class.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/popen.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/rcmdsh.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/sysctl.o /obj/powerpc.powerpc64/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo:(.text+0x838): undefined reference to `sec2str' rtsol.lo:(.text+0xf5c): undefined reference to `sec2str' rtsol.lo:(.text+0x1098): undefined reference to `sec2str' *** Error code 1 Stop in /obj/powerpc.powerpc64/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-09 00:32:37 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-09 00:32:37 - ERROR: failed to build world TB --- 2011-06-09 00:32:37 - 2496.14 user 549.33 system 3224.62 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-powerpc64-powerpc.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on powerpc/powerpc
TB --- 2011-06-08 23:32:46 - tinderbox 2.7 running on freebsd-current.sentex.ca TB --- 2011-06-08 23:32:46 - starting HEAD tinderbox run for powerpc/powerpc TB --- 2011-06-08 23:32:46 - cleaning the object tree TB --- 2011-06-08 23:32:51 - cvsupping the source tree TB --- 2011-06-08 23:32:51 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile TB --- 2011-06-08 23:33:03 - building world TB --- 2011-06-08 23:33:03 - MAKEOBJDIRPREFIX=/obj TB --- 2011-06-08 23:33:03 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2011-06-08 23:33:03 - TARGET=powerpc TB --- 2011-06-08 23:33:03 - TARGET_ARCH=powerpc TB --- 2011-06-08 23:33:03 - TZ=UTC TB --- 2011-06-08 23:33:03 - __MAKE_CONF=/dev/null TB --- 2011-06-08 23:33:03 - cd /src TB --- 2011-06-08 23:33:03 - /usr/bin/make -B buildworld World build started on Wed Jun 8 23:33:03 UTC 2011 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries stage 4.3: make dependencies stage 4.4: building everything [...] `chown.o' is up to date. cc -static -o rescue rescue.o cat.lo chflags.lo chio.lo chmod.lo cp.lo date.lo dd.lo df.lo echo.lo ed.lo expr.lo getfacl.lo hostname.lo kenv.lo kill.lo ln.lo ls.lo mkdir.lo mv.lo pkill.lo ps.lo pwd.lo realpath.lo rm.lo rmdir.lo setfacl.lo sh.lo stty.lo sync.lo test.lo rcp.lo csh.lo atacontrol.lo badsect.lo camcontrol.lo ccdconfig.lo clri.lo devfs.lo dmesg.lo dump.lo dumpfs.lo dumpon.lo fsck.lo fsck_ffs.lo fsck_msdosfs.lo fsdb.lo fsirand.lo gbde.lo geom.lo ifconfig.lo init.lo kldconfig.lo kldload.lo kldstat.lo kldunload.lo ldconfig.lo md5.lo mdconfig.lo mdmfs.lo mknod.lo mount.lo mount_cd9660.lo mount_msdosfs.lo mount_nfs.lo mount_ntfs.lo mount_nullfs.lo mount_udf.lo mount_unionfs.lo newfs.lo newfs_msdos.lo nos-tun.lo ping.lo reboot.lo restore.lo rcorder.lo route.lo routed.lo rtquery.lo rtsol.lo savecore.lo spppcontrol.lo swapon.lo sysctl.lo tunefs.lo umount.lo atmconfig.lo ping6.lo ipf.lo zfs.lo zpool.lo dhclient.lo head.lo mt.lo sed.lo tail.lo tee.lo gzip.lo bzip2.lo xz.lo ! tar.lo vi.lo id.lo chroot.lo chown.lo /obj/powerpc.powerpc/src/rescue/rescue/../librescue/exec.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/getusershell.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/login_class.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/popen.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/rcmdsh.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/sysctl.o /obj/powerpc.powerpc/src/rescue/rescue/../librescue/system.o -lcrypt -ledit -lkvm -ll -ltermcap -lutil -lalias -lcam -lcurses -ldevstat -lipsec -lipx -lavl -lnvpair -lpthread -lzfs -luutil -lumem -lgeom -lbsdxml -ljail -lkiconv -lmd -lreadline -lsbuf -lufs -lz -lbz2 -llzma -larchive -lcrypto -lm rtsol.lo: In function `_$$hide$$ rtsol.lo rtsol_timer_update': (.text+0x86c): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0xf90): undefined reference to `sec2str' rtsol.lo: In function `_$$hide$$ rtsol.lo main': (.text+0x10d0): undefined reference to `sec2str' *** Error code 1 Stop in /obj/powerpc.powerpc/src/rescue/rescue. *** Error code 1 Stop in /src/rescue/rescue. *** Error code 1 Stop in /src/rescue. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. *** Error code 1 Stop in /src. TB --- 2011-06-09 01:03:10 - WARNING: /usr/bin/make returned exit code 1 TB --- 2011-06-09 01:03:10 - ERROR: failed to build world TB --- 2011-06-09 01:03:10 - 4561.03 user 730.36 system 5424.32 real http://tinderbox.freebsd.org/tinderbox-head-HEAD-powerpc-powerpc.full ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
any place to look at for PCI-express performance issues ?
hi, during my tests with netmap with 10Gbit cards (82599, dual port), i notice that a motherboard with an AMD 880G chipset is performing significantly worse than an intel based one. In both cases the NIC is mounted on a 16x PCIe slot, and in both cases the driver reports the use 5Gb/4x per port. On the intel i reach easily 14.88Mpps, on the AMD the card tops at 1.8Mpps, and is not CPU limited (changing dev.cpu.0.freq does not change the throughput). Disabling flow control does not help (and in any case the other end of the link is the same), and since I am using the same picobsd image (based on FreeBSD/i386 head w/ my netmap code) i suspect that the difference in performance has to do with the PCIe controller. My netmap code http://info.iet.unipi.it/~luigi/netmap/ does nothing special on the bus. Now, the question is, is there any place in FreeBSD sources that might be related to PCIe performance, e.g. initialising specific features in one or another northbridge, etc ? cheers luigi ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: IPv4 broken on r222048
On Wed, Jun 8, 2011 at 9:31 AM, Bjoern A. Zeeb
bzeeb-li...@lists.zabbadoz.net wrote:
On Jun 8, 2011, at 4:25 PM, Garrett Cooper wrote:
On Jun 8, 2011, at 9:07 AM, Bjoern A. Zeeb
bzeeb-li...@lists.zabbadoz.net wrote:
On Jun 7, 2011, at 6:15 PM, Garrett Cooper wrote:
I think I just found a good recovery idea -- I should disable the
features with rescue builds. That should give one a working
/rescue/ifconfig in all cases and should be sufficient to recover?
That would be a good backup plan so people could at least avoid
painting themselves into a corner by accident.
Can you confirm that
http://people.freebsd.org/~bz/20110608-02-ifconfig-rescue.diff
would work for you?
One will still be screwed if doing it remotely without serial console or
keyb access, but with that there should be a way to recover. Note that
the rc scripts also check the AF to be present and will not configure them
if not.
Will do when I get back home. I rebuilt world and kernel a few times,
reinstalled, and I'm still running into the same issues (kern.features.inet
is missing), so something is really funky with the system.
I'll look at my last buildkernel log, an if that doesn't turn up anything
helpful try building GENERIC tonight and boot it to see what happens..
I'll let you know how the patch goes..
check with strings if you can find a __kern_features_inet
Is that the right string to look for? All I found was
sysctl__kern_features_children (despite the fact that I do actually
have OIDs hanging off of kern.features).
BTW, objdump -x /boot/kernel/kernel | grep __kern_features_ turned
up a lot more data, but unfortunately inet isn't one of the missing
pieces between strings and objdump -x :/..
I checked opt_global.h and opt_inet.h and #define INET 1 is
present in opt_inet.h at least.. Nothing apparently fishy in the
buildkernel log either... but why isn't it pulling in headers from -I@
or ${KERNBUILDDIR} (!). Also, why is /sys/conf/*.mk blantantly
ignoring my CFLAGS (I hardcoded /usr/obj/usr/src/sys/FALLOUT just for
kicks and it was clearly omitted from the cc calls I saw)?? I haven't
dug down that deep yet, but it would be interesting if someone knew
the answer to that question offhand.
Just for grins I put...
#ifndef INET
#error you lose!
#endif
... in in_proto.c and it didn't bail. So obviously it thinks it
has INET support.
Time to try GENERIC.
Thanks!
-Garrett
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
