Re: SATA2 mode on SATA3 SSD (marvell controller) after boot
On Thu, Apr 17, 2014 at 2:10 PM, Andrey Fesenko f0and...@gmail.com wrote: if disconnect ssd pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout time=1us status= Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us status=0133 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after 0ms Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3 Apr 17 14:07:18 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: ada3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10 Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: pass3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled # uname -a FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932: Sun Mar 30 15:43:01 MSK 2014 root@desktop.local:/usr/obj/usr/src/sys/MY_DES amd64 Is it possible camcontrol repeat behavior as physical disable/enable or enable SATA 3.x mode? camcontrol negotiate only report not set new mode. # camcontrol negotiate pass2 Current parameters: (pass2:ahcich3:0:0:0): SATA revision: 2.x (pass2:ahcich3:0:0:0): ATA mode: UDMA6 (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: SATA2 mode on SATA3 SSD (marvell controller) after boot
On 20.04.2014 22:31, Andrey Fesenko wrote: On Thu, Apr 17, 2014 at 2:10 PM, Andrey Fesenko f0and...@gmail.com wrote: if disconnect ssd pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout time=1us status= Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us status=0133 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after 0ms Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3 Apr 17 14:07:18 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: ada3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10 Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: pass3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled # uname -a FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932: Sun Mar 30 15:43:01 MSK 2014 root@desktop.local:/usr/obj/usr/src/sys/MY_DES amd64 Is it possible camcontrol repeat behavior as physical disable/enable or enable SATA 3.x mode? camcontrol negotiate only report not set new mode. # camcontrol negotiate pass2 Current parameters: (pass2:ahcich3:0:0:0): SATA revision: 2.x (pass2:ahcich3:0:0:0): ATA mode: UDMA6 (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled camcontrol negotiate can limit maximal SATA mode, but not specify it exactly. Unless you limited it previously, there should be no limitation set and HBA should negotiate it freely. The limitations could be read/set with `camcontrol negotiate pass2 -U`, and affect operation after following `camcontrol reset ...`. -- Alexander Motin ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: SATA2 mode on SATA3 SSD (marvell controller) after boot
On Sun, Apr 20, 2014 at 11:44 PM, Alexander Motin m...@freebsd.org wrote: On 20.04.2014 22:31, Andrey Fesenko wrote: On Thu, Apr 17, 2014 at 2:10 PM, Andrey Fesenko f0and...@gmail.com wrote: if disconnect ssd pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout time=1us status= Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us status=0133 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after 0ms Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3 Apr 17 14:07:18 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: ada3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10 Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: pass3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled # uname -a FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932: Sun Mar 30 15:43:01 MSK 2014 root@desktop.local:/usr/obj/usr/src/sys/MY_DES amd64 Is it possible camcontrol repeat behavior as physical disable/enable or enable SATA 3.x mode? camcontrol negotiate only report not set new mode. # camcontrol negotiate pass2 Current parameters: (pass2:ahcich3:0:0:0): SATA revision: 2.x (pass2:ahcich3:0:0:0): ATA mode: UDMA6 (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled camcontrol negotiate can limit maximal SATA mode, but not specify it exactly. Unless you limited it previously, there should be no limitation set and HBA should negotiate it freely. The limitations could be read/set with `camcontrol negotiate pass2 -U`, and affect operation after following `camcontrol reset ...`. -- Alexander Motin system this installer usb image without limitation # uname -a FreeBSD 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r264634: Fri Apr 18 08:25:11 MSK 2014 andrey@desktop.local:/usr/obj/usr/src/sys/GENERIC amd64 root@:~ # camcontrol negotiate pass2 -U User parameters: (pass2:ahcich3:0:0:0): SATA revision: 0.x (pass2:ahcich3:0:0:0): ATA mode: NONE (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled root@:~ # camcontrol reset pass2 Reset of bus 0 was successful root@:~ # camcontrol negotiate pass2 Current parameters: (pass2:ahcich3:0:0:0): SATA revision: 2.x (pass2:ahcich3:0:0:0): ATA mode: UDMA6 (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: SATA2 mode on SATA3 SSD (marvell controller) after boot
On 20.04.2014 22:51, Andrey Fesenko wrote: On Sun, Apr 20, 2014 at 11:44 PM, Alexander Motin m...@freebsd.org wrote: On 20.04.2014 22:31, Andrey Fesenko wrote: On Thu, Apr 17, 2014 at 2:10 PM, Andrey Fesenko f0and...@gmail.com wrote: if disconnect ssd pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout time=1us status= Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:08 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 s/n P0242921 detached Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset... Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us status=0133 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after 0ms Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3 Apr 17 14:07:18 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: ada3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10 Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 Apr 17 14:07:18 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device Apr 17 14:07:18 desktop kernel: pass3: Serial Number P0242921 Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled # uname -a FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932: Sun Mar 30 15:43:01 MSK 2014 root@desktop.local:/usr/obj/usr/src/sys/MY_DES amd64 Is it possible camcontrol repeat behavior as physical disable/enable or enable SATA 3.x mode? camcontrol negotiate only report not set new mode. # camcontrol negotiate pass2 Current parameters: (pass2:ahcich3:0:0:0): SATA revision: 2.x (pass2:ahcich3:0:0:0): ATA mode: UDMA6 (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled camcontrol negotiate can limit maximal SATA mode, but not specify it exactly. Unless you limited it previously, there should be no limitation set and HBA should negotiate it freely. The limitations could be read/set with `camcontrol negotiate pass2 -U`, and affect operation after following `camcontrol reset ...`. -- Alexander Motin system this installer usb image without limitation # uname -a FreeBSD 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r264634: Fri Apr 18 08:25:11 MSK 2014 andrey@desktop.local:/usr/obj/usr/src/sys/GENERIC amd64 root@:~ # camcontrol negotiate pass2 -U User parameters: (pass2:ahcich3:0:0:0): SATA revision: 0.x (pass2:ahcich3:0:0:0): ATA mode: NONE (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled root@:~ # camcontrol reset pass2 Reset of bus 0 was successful root@:~ # camcontrol negotiate pass2 Current parameters: (pass2:ahcich3:0:0:0): SATA revision: 2.x (pass2:ahcich3:0:0:0): ATA mode: UDMA6 (pass2:ahcich3:0:0:0): ATAPI packet length: 0 (pass2:ahcich3:0:0:0): PIO transaction length: 8192 (pass2:ahcich3:0:0:0): PMP presence: 0 (pass2:ahcich3:0:0:0): Number of tags: 32 (pass2:ahcich3:0:0:0): SATA capabilities: 0030 (pass2:ahcich3:0:0:0): tagged queueing: enabled Then it is a question to hardware or firmware not an OS driver. -- Alexander Motin ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[head tinderbox] failure on arm/arm
TB --- 2014-04-20 18:50:39 - tinderbox 2.21 running on freebsd-current.sentex.ca TB --- 2014-04-20 18:50:39 - FreeBSD freebsd-current.sentex.ca 9.2-STABLE FreeBSD 9.2-STABLE #0 r263721: Tue Mar 25 09:27:39 EDT 2014 d...@freebsd-current.sentex.ca:/usr/obj/usr/src/sys/GENERIC amd64 TB --- 2014-04-20 18:50:39 - starting HEAD tinderbox run for arm/arm TB --- 2014-04-20 18:50:39 - cleaning the object tree TB --- 2014-04-20 18:50:39 - /usr/local/bin/svn stat --no-ignore /src TB --- 2014-04-20 18:50:44 - At svn revision 264702 TB --- 2014-04-20 18:50:45 - building world TB --- 2014-04-20 18:50:45 - CROSS_BUILD_TESTING=YES TB --- 2014-04-20 18:50:45 - MAKEOBJDIRPREFIX=/obj TB --- 2014-04-20 18:50:45 - PATH=/usr/bin:/usr/sbin:/bin:/sbin TB --- 2014-04-20 18:50:45 - SRCCONF=/dev/null TB --- 2014-04-20 18:50:45 - TARGET=arm TB --- 2014-04-20 18:50:45 - TARGET_ARCH=arm TB --- 2014-04-20 18:50:45 - TZ=UTC TB --- 2014-04-20 18:50:45 - __MAKE_CONF=/dev/null TB --- 2014-04-20 18:50:45 - cd /src TB --- 2014-04-20 18:50:45 - /usr/bin/make -B buildworld Building an up-to-date make(1) World build started on Sun Apr 20 18:50:52 UTC 2014 Rebuilding the temporary build tree stage 1.1: legacy release compatibility shims stage 1.2: bootstrap tools stage 2.1: cleaning up the object tree stage 2.2: rebuilding the object tree stage 2.3: build tools stage 3: cross tools stage 4.1: building includes stage 4.2: building libraries [...] cc -O -pipe -I/src/lib/libc/include -I/src/lib/libc/../../include -I/src/lib/libc/arm -DNLS -D__DBINTERFACE_PRIVATE -I/src/lib/libc/../../contrib/gdtoa -I/src/lib/libc/../../contrib/libc-vis -DINET6 -I/obj/arm.arm/src/lib/libc -I/src/lib/libc/resolv -D_ACL_PRIVATE -DPOSIX_MISTAKE -I/src/lib/libc/../../contrib/jemalloc/include -I/src/lib/libc/../../contrib/tzcode/stdtime -I/src/lib/libc/stdtime -I/src/lib/libc/locale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN -I/src/lib/libc/rpc -I/src/lib/libc/arm/softfloat -I/src/lib/libc/softfloat -DSOFTFLOAT_FOR_GCC -DYP -DNS_CACHING -DSYMBOL_VERSIONING -std=gnu99 -Qunused-arguments -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized -Wno-pointer-sign -Wno-empty-body -Wno-string-plus-int -Wno-unused-const-variable -Wno-tautological-compare -Wno-unused-value -Wno-parentheses-equality -Wno-unused-function -Wno-enum-conversion -Wno-switch -Wno-switch-enum -Wno-knr-promoted-parameter -c /src/lib/libc/uuid/uuid_create_nil.c -o! uuid_create_nil.o cc -O -pipe -I/src/lib/libc/include -I/src/lib/libc/../../include -I/src/lib/libc/arm -DNLS -D__DBINTERFACE_PRIVATE -I/src/lib/libc/../../contrib/gdtoa -I/src/lib/libc/../../contrib/libc-vis -DINET6 -I/obj/arm.arm/src/lib/libc -I/src/lib/libc/resolv -D_ACL_PRIVATE -DPOSIX_MISTAKE -I/src/lib/libc/../../contrib/jemalloc/include -I/src/lib/libc/../../contrib/tzcode/stdtime -I/src/lib/libc/stdtime -I/src/lib/libc/locale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN -I/src/lib/libc/rpc -I/src/lib/libc/arm/softfloat -I/src/lib/libc/softfloat -DSOFTFLOAT_FOR_GCC -DYP -DNS_CACHING -DSYMBOL_VERSIONING -std=gnu99 -Qunused-arguments -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized -Wno-pointer-sign -Wno-empty-body -Wno-string-plus-int -Wno-unused-const-variable -Wno-tautological-compare -Wno-unused-value -Wno-parentheses-equality -Wno-unused-function -Wno-enum-conversion -Wno-switch -Wno-switch-enum -Wno-knr-promoted-parameter -c /src/lib/libc/uuid/uuid_equal.c -o uuid! _equal.o cc -O -pipe -I/src/lib/libc/include -I/src/lib/libc/../../include -I/src/lib/libc/arm -DNLS -D__DBINTERFACE_PRIVATE -I/src/lib/libc/../../contrib/gdtoa -I/src/lib/libc/../../contrib/libc-vis -DINET6 -I/obj/arm.arm/src/lib/libc -I/src/lib/libc/resolv -D_ACL_PRIVATE -DPOSIX_MISTAKE -I/src/lib/libc/../../contrib/jemalloc/include -I/src/lib/libc/../../contrib/tzcode/stdtime -I/src/lib/libc/stdtime -I/src/lib/libc/locale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN -I/src/lib/libc/rpc -I/src/lib/libc/arm/softfloat -I/src/lib/libc/softfloat -DSOFTFLOAT_FOR_GCC -DYP -DNS_CACHING -DSYMBOL_VERSIONING -std=gnu99 -Qunused-arguments -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized -Wno-pointer-sign -Wno-empty-body -Wno-string-plus-int -Wno-unused-const-variable -Wno-tautological-compare -Wno-unused-value -Wno-parentheses-equality -Wno-unused-function -Wno-enum-conversion -Wno-switch -Wno-switch-enum -Wno-knr-promoted-parameter -c /src/lib/libc/uuid/uuid_from_string.c -! o uuid_from_string.o cc -O -pipe -I/src/lib/libc/include -I/src/lib/libc/../../include -I/src/lib/libc/arm -DNLS -D__DBINTERFACE_PRIVATE -I/src/lib/libc/../../contrib/gdtoa -I/src/lib/libc/../../contrib/libc-vis -DINET6 -I/obj/arm.arm/src/lib/libc -I/src/lib/libc/resolv -D_ACL_PRIVATE -DPOSIX_MISTAKE -I/src/lib/libc/../../contrib/jemalloc/include -I/src/lib/libc/../../contrib/tzcode/stdtime -I/src/lib/libc/stdtime -I/src/lib/libc/locale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN
Re: SATA2 mode on SATA3 SSD (marvell controller) after boot
On Mon, Apr 21, 2014 at 12:05 AM, Alexander Motin m...@freebsd.org wrote: Then it is a question to hardware or firmware not an OS driver. -- Alexander Motin Thanks for the tips try to change to another, it seems some problems with the firmware In the linux (grml) Sata-3 hdd have section Standards: Supported: 9 8 7 6 5 Likely used: 9 # hdparm -I /dev/sdc /dev/sdc: ATA device, with non-removable media Model Number: PLEXTOR PX-128M5S Serial Number: P0242921 Firmware Revision: 1.05 Transport: Serial, ATA8-AST, SATA II Extensions, SATA Rev 2.6, SATA Rev 3.0 Standards: Used: ATA/ATAPI-7 T13 1532D revision 4a Supported: 8 7 6 5 some of 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBAuser addressable sectors: 250069680 LBA48 user addressable sectors: 250069680 Logical Sector size: 512 bytes Physical Sector size: 512 bytes Logical Sector-0 offset: 0 bytes device size with M = 1024*1024: 122104 MBytes device size with M = 1000*1000: 128035 MBytes (128 GB) cache/buffer size = unknown Nominal Media Rotation Rate: Solid State Device Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: *SMART feature set Security Mode feature set *Power Management feature set *Write cache *Look-ahead *Host Protected Area feature set *WRITE_BUFFER command *READ_BUFFER command *DOWNLOAD_MICROCODE SET_MAX security extension *48-bit Address feature set *Device Configuration Overlay feature set *Mandatory FLUSH_CACHE *FLUSH_CACHE_EXT *SMART error logging *SMART self-test *General Purpose Logging feature set *64-bit World wide name *Segmented DOWNLOAD_MICROCODE *Gen1 signaling speed (1.5Gb/s) *Gen2 signaling speed (3.0Gb/s) *Gen3 signaling speed (6.0Gb/s) *Native Command Queueing (NCQ) *Host-initiated interface power management *Phy event counters *DMA Setup Auto-Activate optimization Device-initiated interface power management *Software settings preservation unknown 78[8] *SMART Command Transport (SCT) feature set *SCT Write Same (AC2) *SCT Error Recovery Control (AC3) *SCT Features Control (AC4) *SCT Data Tables (AC5) *Data Set Management TRIM supported (limit 8 blocks) Security: supported not enabled not locked frozen not expired: security count supported: enhanced erase 6min for SECURITY ERASE UNIT. 6min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 500230310017df1b NAA : 5 IEEE OUI: 002303 Unique ID : 10017df1b Checksum: correct after reconnect SSD this information not change, but syslog 2014-04-21T00:23:21.223409+00:00 grml kernel: [3.482230] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 2014-04-21T00:23:21.223410+00:00 grml kernel: [3.482375] Switched to clocksource tsc 2014-04-21T00:23:21.223410+00:00 grml kernel: [3.484803] ata4.00: ATA-8: PLEXTOR PX-128M5S, 1.05, max UDMA/133 2014-04-21T00:23:21.223413+00:00 grml kernel: [3.484804] ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ... 2014-04-21T00:43:52.004962+00:00 grml kernel: [ 1199.327857] ata4: SError: { DevExch } 2014-04-21T00:43:52.004962+00:00 grml kernel: [ 1199.327860] ata4: hard resetting link 2014-04-21T00:43:52.728949+00:00 grml kernel: [ 1200.048622] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) 2014-04-21T00:43:52.728953+00:00 grml kernel: [ 1200.051217] ata4.00: ATA-8: PLEXTOR PX-128M5S, 1.05, max UDMA/133 2014-04-21T00:43:52.728954+00:00 grml kernel: [ 1200.051219] ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA ___