Does anyone have the ed0 driver working with current of the last few
days utilizing a pcmcia card like the de660?
Thanks,
ed
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
I had that a few days back and just added
controller miibus0
to my kernel config file for my xl0 controler.
provecho,
ed
Tomas TPS Ulej wrote:
CVSUP + make world from today is ok. Than I tried recompilation of kernel.
Exits with:
/libkern/strlen.c ../../libkern/strncmp.c
"Matthew N. Dodd" wrote:
On Sun, 19 Sep 1999, Wes Morgan wrote:
The ed* ne2k and friends driver has quit working for me with a recent
-current snapshot as of sometime early this afternoon. The board is
correctly probed, but seems that it is never initialized.
I'm working on fixing this
This morning I made world, updated XFree86 and kde, which didn´t seem to
be a problem until I started X and nowI get revers Icon's - silhouettes
on the kde background. I get no text but a block where the text is and
the mouse will often change to a block. I have never seen anything like
it. I
with this.
Have a great weekend,
ed
Ian Dowse wrote:
In message [EMAIL PROTECTED], Edwin Culp writes:
libraries, I decided as a last resort to substitute the SiS-6326 that worked
flawlessly on 3.3.4. I changed it for a Matrox G200 and ran xf86config and
it worked perfectly with no other changes
Fry´s was out of Intel 100/10 ethernet cards, so I bought a Linksys
LNE100TX remembering that I there was a driver for it.
I added
device pn0
to my kernel configuration and compiled the kernel. It was not detected
during boot. I added the mii_bus0 controller just in case. Recompiled
Bill Paul wrote:
Of all the gin joints in all the towns in all the world, Edwin Culp had
to walk into mine and say:
Fry´s was out of Intel 100/10 ethernet cards, so I bought a Linksys
LNE100TX remembering that I there was a driver for it.
No, you bought an LNE100TX v2.0, forgetting
Systems Administrator
PC Tech Reports
http://www.pctechreports.com
---FreeBSD... The choice of the smart generation---
- Original Message -
From: Edwin Culp [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, September 30, 1999 11:07 AM
Subject: Linksys LNE100TX
| Fry´s was out
I just installed it out of curiosity. Everything went well until I try to execute
it. It starts as if it were going to work and then it gives me a core dump with a
message box that says, "An unrecoverable error has occurred. All modified files
have been saved and probably can be recovered at
Johan Karlsson wrote:
At Sun, 10 Oct 1999 23:40:04 PDT, Edwin Culp wrote:
I just installed it out of curiosity. Everything went well until I try to exe
cute
it. It starts as if it were going to work and then it gives me a core dump wi
th a
message box that says, "An unrecoverable
Edwin Culp wrote:
Sean O'Connell wrote:
On 1999 Oct 11, Edwin Culp (aka [EMAIL PROTECTED]) wrote:
I didn't install it there, to begin with;-) Still, I can't seem to find the
problem.
Ed-
I saw this problem with a user on a laptop running 3.2+PAO. It
seems to mostly work
I seem to have a problem compiling a kernel on my laptop with the ed0
driver that I use for my D-link 660 pcmcia card.
Running current, cvsup this morning. Make world finished with no problems
but my attempt at kernel compilation yielded:
if_ed_isa.o: In function `ed_isa_attach':
I got 63 bytes also.
ed
Maxim Sobolev wrote:
Kenneth Culver wrote:
For all those who mailed this list about the temperature monitor apps
saying that the device wasn't configured, I have a preliminary version of
an app that should work for you. I just finished writing it about 10
Leonard Sitongia wrote:
At 2:47 PM -0400 10/16/99, Matthew N. Dodd wrote:
On Sat, 16 Oct 1999, Leonard Sitongia wrote:
download the patch, apply it in sys/dev/ed, edit files.i386 and uncomment
sys/dev/ed/if_ed_pccard.c. Re-config make.
I've tried it, and if_ed_pccard.c compiles now
"Matthew N. Dodd" wrote:
On Sat, 16 Oct 1999, Edwin Culp wrote:
I had the same problem yesterday and Matthew Dodd sent me the
following fix that worked fine. I recompiled the kernel and am now
using it with ed0.
Ok, if someone could test the following patch:
ftp://ftp.jurai
Michael Reifenberger wrote:
Hi,
after upgrading my Tecra-8000 to -current as of -now I get the attached output
during boot.
And the ep0 driver doesnt get attached with the following message:
Cannot allocate ports 0x240-0x24f
I have been getting the same with yesterday's and today's world
I just saw my log file from this mornings make world.
ed
cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc/include
-D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE
-I/usr/src/lib/libc/../libc/locale -DBROKEN_DES -DYP
-I/usr/obj/usr/src/tmp/usr/include -c
/usr/src/lib/libc/../libc/gen/getcwd.c -o
I'm in the process, thank you.
ed
Julian Elischer wrote:
re-sup
On Thu, 21 Oct 1999, Edwin Culp wrote:
I just saw my log file from this mornings make world.
ed
cc -O -pipe -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc/include
-D__DBINTERFACE_PRIVATE -DPOSIX_MISTAKE
-I/usr/src
Just looking at the results of a make world from a cvsup at about 4:40
PST.
ed
/usr/obj/usr/src/tmp/usr/include/sys/ttydev.h:60: warning: `B115200'
redefined
/usr/obj/usr/src/tmp/usr/include/termios.h:227: warning: this is the
location of the previous definition
cc -nostdinc -O -pipe -DBSD
Michael,
I just threw one in my laptop a couple of days ago. I didn't even have to recompile
the kernel. I just
added the stock WaveLAN section to my pccard.conf let it load the if_wi.ko and it
worked. Although when I
reboot I have to take the card out and put it back in because there seems
Edwin Culp wrote:
Michael,
I just threw one in my laptop a couple of days ago. I didn't even have to recompile
the kernel. I just
added the stock WaveLAN section to my pccard.conf let it load the if_wi.ko and it
worked. Although when I
reboot I have to take the card out and put it back
John Hay wrote:
: Are there any datasheets available for this bridge ?
Yes. However, I've had several reports of the lucent wavelan bridge
working flawlessly.
I recall (but might be wrong) that most if not all sucess stories are
on notebooks with the TI-1225 on the motherboard. Maybe
Ilya Naumov wrote:
Hello,
make release fails with the following diagnosis:
=== bin/csh/nls
=== bin/csh/nls/finnish
install -c -o root -g wheel -m 444 tcsh.cat
/R/stage/trees/bin/../usr/share/nls/fi_FI.ISO_8859-1/tcsh.cat
*** Error code 71
I just finished one a couple of hours ago
On today's current, I plugged in my WaveLan Card that I haven't used for
about a week and it first has a problem with IRQ: wi0: No irq?!I
added some others and it responded with: wi0: No I/O space?! Has
something changed in the last few days that would cause this? My
network card DE-660
failed
wi0: device timeout
wi0: tx buffer allocation failed
wi0: xmit failed
It worked fine with this configuration on current for many months. I'm not
sure if I am making progress or not:-)
ed
I'm using 5.0 current as of this morning.
Russell Cattelan wrote:
Edwin Culp wrote:
On today's
00050 divert 8668 ip from any to any via dc0
ipfw: setsockopt(IP_FW_ADD): Invalid argument
I'm getting this error with ipfw running current as of this morning.
Has something changed?
Thanks,
ed
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of
Will Andrews wrote:
On Sun, Jun 11, 2000 at 01:19:44PM -0700, Edwin Culp wrote:
00050 divert 8668 ip from any to any via dc0
ipfw: setsockopt(IP_FW_ADD): Invalid argument
I'm getting this error with ipfw running current as of this morning.
Has something changed?
Other than that you
Luigi Rizzo wrote:
00050 divert 8668 ip from any to any via dc0
ipfw: setsockopt(IP_FW_ADD): Invalid argument
I'm getting this error with ipfw running current as of this morning.
Has something changed?
well, there was a commit to dummynet few days ago, which requires
you to
I have 5 machines running current. All are booting fine with the
changes made on June 12, with the exception of a k-6 laptop. I have
been booting the kernel.works since the changes and can't seem to get
something right. I have tried with my original kernel configuration and
now have been
Donn Miller wrote:
Did you compile your kernel with any optimizations, such as -Os? If so,
try it recompiling it without optimizations.
Unfortunately, no. I wish that I had, because I'm fresh out of things to
try.
Thanks,
ed
- Donn
On Tue, 27 Jun 2000, Edwin Culp wrote:
I have 5
2000, Warner Losh wrote:
In message [EMAIL PROTECTED] Edwin Culp writes:
: int=000d err= eft=00010046 eip=92eb
: eax=00fb ebx= ecx=0152 edx=03f6
: esi=000fbc92 edi=000f ebp=17b4 esp=17b4
: cs:eip=0f 32 89 45 1c 89 55 14-46 eb cf 80 65 31 fd
John Baldwin wrote:
On 27-Jun-00 Edwin Culp wrote:
Donn Miller wrote:
Did you compile your kernel with any optimizations, such as -Os? If so,
try it recompiling it without optimizations.
Unfortunately, no. I wish that I had, because I'm fresh out of things to
try.
It's fixed
After a successful make world and kernel this morning, I am having a problem
with ld-elf.so.1/pam/imap.
Everytime someone tries to login to imap the following error is generated.
Aug 27 09:20:17 aNeed2Learn /usr/libexec/ld-elf.so.1:
Aug 27 09:20:17 aNeed2Learn /usr/lib/pam_nologin.so:
I hadn't rebooted my laptop since Aug 28 although I have been building world
and a new kernel daily. I thought today would be a good day to see how acpi
was comming. Mistake. It comes up fine, I think because all I can see are:
acpi_cmbat0: bif size changed 0
at what looks like several per
I just realized that booting an old kernel doesn't stop the errors. It that
the case or am I now doing something totally stupid in addition to having
decided to reboot my laptop today? :-)
Thanks,
ed
Quoting Edwin Culp [EMAIL PROTECTED]:
|
| I hadn't rebooted my laptop since Aug 28
David,
You are a life saver, as you so often are. I am copying this to the
developers so they can let me know what they need because this Compaq
seems to be a mess.
I'll add this to my hints and see what happens.
Thanks again,
ed
Quoting David Wolfskill [EMAIL PROTECTED]:
| Per Mike
I'm getting the same problem on one of my current servers and on others no
thanks,
ed
Quoting Storms of Perfection [EMAIL PROTECTED]:
|
|
| Sep 12 13:55:57 boom imapd[469]: imap service init from 192.168.0.40
| Sep 12 13:55:57 boom /usr/libexec/ld-elf.so.1:
| Sep 12 13:55:57 boom
Julian,
I started getting this yesterday and am still getting it today.
* $FreeBSD: src/sys/sys/proc.h,v 1.180 2001/09/12 08:38:05 julian Exp $
I'm still running my yesterday's kernel. I'm sure that in my case it has
nothing to do with your commit.
ed
Quoting Julian Elischer [EMAIL
In case no one has seen this, I'm getting
(cd /usr/src/etc; install -c -o root -g wheel -m 444 amd.map apmd.conf auth.con
f crontab csh.cshrc csh.login csh.logout dhclient.conf dm.conf fbtab ftpusers
gettytab group hosts hosts.allow hosts.equiv hosts.lpd inetd.conf login.access
login.conf
It's working now.
Thanks,
ed
Quoting Hellmuth Michaelis [EMAIL PROTECTED]:
| From the keyboard of Peter Wemm:
| Edwin Culp wrote:
| I just rebooted and was put into single user with the following
| message:
|
|/boot/kernel/kernel: KLD linprocfs.ko: depends on linux - not
| available
Quoting Warner Losh [EMAIL PROTECTED]:
| In message [EMAIL PROTECTED] Peter Wemm
| writes:
| : Edwin Culp wrote:
| : I just rebooted and was put into single user with the following
| message:
| :
| : /boot/kernel/kernel: KLD linprocfs.ko: depends on linux - not
| available
| :
| : I just
With my kernel and with a Generic kernel, I am getting a Fatal trap 12
when trying to access the network.
The first thing that happens on the network seems to cause the panic.
The following was an error with a
generic kernel. I'm typing it so there could be mistakes.
Fatal trap 12: page
wrote:
cvsup -- this was fixed sometime within the last 24hours.
On Sat, 1 Dec 2001, Edwin Culp wrote:
:With my kernel and with a Generic kernel, I am getting a Fatal trap 12
:when trying to access the network.
:The first thing that happens on the network seems to cause the panic
Manfred Antar wrote:
At 07:12 PM 12/1/2001 -0800, Edwin Culp wrote:
Andrew,
Thanks. Now my problem is that I can't cvsup. Any ideas on how to update my
sources?
Maybe someone could email me a patch and I could take it over with a floppy. Right
now
I have no access to the network
and it's happily
doing a cvsup right now that will be followed
by a make world and new kernel.
Many thanks to you, Andrew and Manfred for keeping me from drowning in a
glass of water.
ed
Alfred Perlstein wrote:
* Edwin Culp [EMAIL PROTECTED] [011201 21:25] wrote:
Andrew,
Thanks. Now my
This may explain my problem with the excite@home/attbi.com change over.
According to them it is pure dhcp. Since it has always just worked when
I needed it, I haven't really tested.
ed
Quoting Warner Losh [EMAIL PROTECTED]:
In message [EMAIL PROTECTED] Pierre Y.
Dampure writes:
: Are you
Is anyone using dhclient successfully with Current of the last week or so?
I don't use it all the time but I have been trying for the last couple of
days without success.
It accesses the server and changes the interface ip to 0.0.0.0 netmask
255.255.255.255.
Thanks,
ce
---
To
Emiel,
Thanks a lot for the feedback. I have to look further.
Hmmm... Maybe it is my dhcp server but the problem originated with the
excite@home service change to attbi.com and their dhcp. Neither work:-(
ed
Quoting Emiel Kollof [EMAIL PROTECTED]:
* Edwin Culp ([EMAIL PROTECTED]) wrote
Quoting David Wolfskill [EMAIL PROTECTED]:
Date: Thu, 13 Dec 2001 06:15:32 -0800
From: Edwin Culp [EMAIL PROTECTED]
Is anyone using dhclient successfully with Current of the last week or so?
Sure; hadn't noticed any problems with it.
I don't use it all the time but I have been trying
, 13 Dec 2001, Edwin Culp wrote:
Is anyone using dhclient successfully with Current of the last week or
so? I don't use it all the time but I have been trying for the last
couple of days without success.
It accesses the server and changes the interface ip to 0.0.0.0 netmask
My laptop sound seems to have quit working after some changes that were
submitted, between my Tuesday morning +-4:30 am PST and wednesday
4:30 am PST. I assumed that I had not cvsuped all the changes but
today's build still doesn't work. The module loads but no sound.
/root # cat /dev/sndstat
26, 2002 at 10:28:52PM +0100, Anders Andersson wrote:
On Fri, Jan 25, 2002 at 06:21:30AM -0800, Edwin Culp wrote:
My laptop sound seems to have quit working after some changes that were
submitted, between my Tuesday morning +-4:30 am PST and wednesday
4:30 am PST. I assumed that I had
David,
Thanks for posting this. I have built a new world and kernel but haven't
run mergemaster, yet. I did see the problem just waiting in
/usr/src/etc/rc.d so I think I'll just leave it there for the time being.
Thanks again for the advance notice.
ed
Quoting David W. Chapman Jr. [EMAIL
World is breaking for me at:
=== usr.sbin/rpc.yppasswdd
cc -nostdinc -O -pipe -I/usr/src/usr.sbin/rpc.yppasswdd/../../usr.sbin/vipw
-I/usr/src/usr.sbin/rpc.yppasswdd/../../usr.sbin/ypserv
-I/usr/src/usr.sbin/rpc.yppasswdd/../../libexec/ypxfr
World is breaking for me at:
=== usr.sbin/rpc.yppasswdd
cc -nostdinc -O -pipe -I/usr/src/usr.sbin/rpc.yppasswdd/../../usr.sbin/vipw
-I/usr/src/usr.sbin/rpc.yppasswdd/../../usr.sbin/ypserv
-I/usr/src/usr.sbin/rpc.yppasswdd/../../libexec/ypxfr
I just realized that current/XFree86-4.1.0_12,1 core dumps with either
kde or gnome. I seems to work fine with twm. It dumps at the same
place when starting x with both.
(II) XINPUT: Adding extended input device Mouse1 (type: MOUSE)
Could not init font path element
Today's make buildkernel seems to break because of a missing opt_compat.h.
mkdep -f .depend -a -nostdinc -nostdinc -D_KERNEL -DKLD_MODULE -I- -I. -I@ -I@
/dev -I@/../include -I/usr/obj/usr/src/i386/usr/include /usr/src/sys/modules/di
gi/digi/../../../dev/digi/digi.c
) appears to be causing the problem
At 07:28 PM 2/14/2002 -0800, Edwin Culp wrote:
I just realized that current/XFree86-4.1.0_12,1 core dumps with either
kde or gnome. I seems to work fine with twm. It dumps at the same
place when starting x with both.
(II) XINPUT: Adding extended
On my daily build, my kernels are broken as per log:
=== wi
cd /usr/obj/usr/src/sys/PIII850N; MAKESRCPATH=/usr/src/sys/dev/aic7xxx/aicasm
make -
f /usr/src/sys/dev/aic7xxx/aicasm/Makefile
Warning: Object directory not changed from original /usr/obj/usr/src/sys/PIII850N
cc -O -pipe
20, 2002 at 05:53:59AM -0800, Edwin Culp wrote:
On my daily build, my kernels are broken as per log:
=== wi
cd /usr/obj/usr/src/sys/PIII850N;
MAKESRCPATH=/usr/src/sys/dev/aic7xxx/aicasm
make -
f /usr/src/sys/dev/aic7xxx/aicasm/Makefile
Warning: Object directory not changed from
Quoting David Wolfskill [EMAIL PROTECTED]:
Date: Thu, 21 Feb 2002 09:48:10 -0800
From: [EMAIL PROTECTED]
I sure missed something, I'm sorry. I still have the problem with
buildworld. What should I do to fix it?
# /usr/bin/cc -print-search-dirs
install: /usr/libexec/(null)
Actually, I need to create a local wireless backbone between 8 seperate
buildings in a small campus area that will share an sdsl internet connection
through our freebsd server. The new intel pro wireless 2100 seems to address
all of our issues, at least according to the intel webpage. :-) They
I got a similar error yesterday with current, linux-communicator and a new kde2.
I had to execute linux netscape from a text screen with -display. I would get
the libc.so.6 error from kde. It was really strange but updating pam.conf, fixed
it for me.
ed
Glen Gross wrote:
I am running the
The Hermit Hacker wrote:
do a 'make -k world' ... I had the same problem with vi, and the same
SegFault ... by using -k, it bypasses the error, which allows it to get to
the point that the newer vi is installed, which doesn't SegFault ...
Thanks, I just started them all up with -k . I
Mark,
Thanks a lot. I read Marc's mail first so I'm trying the -k solution first
but I will also take USB support out of the kernels that have it.
Thanks,
ed
Mark Hittinger wrote:
Maybe this is related, maybe not... I upgraded to the latest CURRENT
available this morning and now I also
Szilveszter,
I've got some other weird problems with cores and panics but vi is the only
one that I can define well enough. I'm also taking all USB support from the
kernels that have it to see if my other strange problems disappear like access
to mysql databases with php4 cvs and some strange
I am starting to get the following error. I've never seen it before and don't
really understand why it should fail. Where should I start looking for the
problem?
/boot/kernel/kernel: swap_pager_getswapspace: failed
This seems to have started in the last week.
Thanks,
ed
--
EnContacto.Net
With this morning's make world, I get the following error with man. I've checked
six different machines with slightly different cvsup and build times and using
different cvsup locations. They all coincide.
FreeBSD dsl.mexcomusa.net 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Fri Jan 19
07:52:22 PST
Quoting Chris A. Mattingly [EMAIL PROTECTED]:
|
| In trying to recompile php-4.2.1 on my current -current system, to go
| along with the new apache, I've run into some problems that haven't shown
| up in all the other places I've had to recompile apache/php these past
| few days which is
Quoting Kenneth Culver [EMAIL PROTECTED]:
| I'm running a uniproc. box at work with -CURRENT and over 4-5hrs, wired
| grew from 50megs (when I first time checked) to 141megs (now). Dunno if
| this normal, but it has kept growing.
|
| OK, I don't see it happening here on my uniproc box,
Quoting Mario Goebbels [EMAIL PROTECTED]:
| 4th July 5pm CET, with world and kernel from 11am 3rd July, after a
| couple of hours runtime, doing mainly xchat and Mozilla, I got these stats:
|
| Mem: 73M Active, 221M Inact, 210M Wired, 1128K Cache, 61M Buf, 136M Free
| Swap: 512M Total,
Simon,
Alex Dupre [EMAIL PROTECTED] submitted mod_php-dev with
PR ports/39623 on July 7 that I have been using and works great
There is/was a copy of the port at:
http://www.gufi.org/~alex/php-dev.tar.gz
Alex has done a several updates on this and I think it has never
been committed. I have
Quoting karl agee [EMAIL PROTECTED]:
|
| Excuse my newbie ignorance, but, how to do print a file bypassing lpr
| and apsfilter
How about
# cat file_to_print.ps /dev/lpt0
or
# cp file_to_pring.ps /dev/lpt0
ed
-
This doesn't make much sense and is probably not related but I've had the
problem for about a month and thought it was going to go away but it hasn't.
I really don't know where to start looking. Just after the KSE changes at
the beginning of July I upgraded mysql. Since then I have had
Quoting Marc Recht [EMAIL PROTECTED]:
| I really don't know where to start looking. Just after the KSE changes at
| the beginning of July I upgraded mysql. Since then I have had
| intermittent
| problems with mysql hanging far too often. It takes 100% of the resources
| and has to be
Quoting Edwin Culp [EMAIL PROTECTED]:
Update. I have two machines with this problem so I installed mysql-3.23.49
on one and it exhibited the same race condition so it would appear to have
to do with the KSE of GCC compiler changes but again, I'm way out of my
league here.
Thanks,
ed
Quoting Manfred Antar [EMAIL PROTECTED]:
| The same thing happend to me a few weeks ago when I did an upgrade from
| 3.23.49 == 3.23.51
| I think what I ended up doing was to use the gcc3.2 from ports, and I built
| it staticlly.
| First i installed gcc3.2 the made sure /usr/local/bin
Quoting Manfred Antar [EMAIL PROTECTED]:
| At 08:54 AM 8/2/2002 -0700, Edwin Culp wrote:
| This doesn't make much sense and is probably not related but I've had the
| problem for about a month and thought it was going to go away but it
| hasn't.
| I really don't know where to start looking
Quoting Manfred Antar [EMAIL PROTECTED]:
Manfred,
! ! IT WORKS ! ! for the first time is several weeks:-)
! THANKS !
I followed your steps and added a couple of my own below just in case someone
else is having problems.
|
| Ed
| I think i did this
| Build and install the gcc32 port
Trying to boot with today's current I am getting
GTX Loader 1.0 BTX Version 0.00
Error: Client format not supported
Anyone have any ideas to be able to boot.
Thanks,
ed
I haven't seen murphy for a while but boy did he show
up today. (I don't think I have ever rebooted both my
machines
Quoting David W. Chapman Jr. [EMAIL PROTECTED]:
| On Fri, Aug 30, 2002 at 11:48:52AM -0700, walt wrote:
| After make world/kernel yesterday I get this error from the bootloader:
|
| BTX version =0.00 (instead of 1.01)
| Client format not supported.
|
| and then it hangs. I have
Today's current gave me the following error while building a new kernel after
a successful make world.
cd /usr/src/sys/modules ; MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/PIII850N/modules
KMODDIR=/boot/kernel MACHINE=i386 make cleandir
=== 3dfx
=== accf_data
=== accf_http
=== agp
=== aha
===
Quoting Justin T. Gibbs [EMAIL PROTECTED]:
| Today's current gave me the following error while building a new kernel
| after a successful make world.
|
| cd /usr/src/sys/modules ;
| MAKEOBJDIRPREFIX=/usr/obj/usr/src/sys/PIII850N/modules
| KMODDIR=/boot/kernel MACHINE=i386 make
After a successful make world, I got the following error on initiating
buildkernel.
mkdep -f .depend -a -nostdinc -D_KERNEL -DKLD_MODULE -I- -I. -I@ -I@/dev -I@/.
./include -I/usr/obj/usr/src/i386/usr/include /usr/src/sys/modules/linux/../../
i386/linux/linux_dummy.c
Quoting Alexander Kabaev [EMAIL PROTECTED]:
| Hi everyone,
|
| I've collected a number of patches for several problems with
| GCC 3.2 compiler which have been brought to my attention so far.
| While I am waiting for these patches or other suitable fixes to be
| incorporated into FSF CVS
Quoting Alexander Kabaev [EMAIL PROTECTED]:
| Hi everyone,
|
| I've collected a number of patches for several problems with
| GCC 3.2 compiler which have been brought to my attention so far.
| While I am waiting for these patches or other suitable fixes to be
| incorporated into FSF CVS
I just bought an new battery and that combined with the fact that
I've seen so many recent emails about acpi that I decided to check my
laptop. I've never really been able to take advantage of acpi with it
and may never be able to, but previously I was able to do an acpidump
and now I get:
I am using current with a patched gcc3.2. The patched gcc was used to
make world (cvsup - patch gcc - make world) I get the following when
trying to compile ports/mail/courier.
gmake[1]: Entering directory `/usr/ports/mail/courier/work/courier-0.39.3/afx'
c++ -I.. -I./.. -Wall -O -pipe
Quoting Edwin Culp [EMAIL PROTECTED]:
| I am using current with a patched gcc3.2. The patched gcc was used to
| make world (cvsup - patch gcc - make world) I get the following when
| trying to compile ports/mail/courier.
|
| gmake[1]: Entering directory
| `/usr/ports/mail/courier/work
I just realized that slapd dumps core with:
Fatal error '_pq_insert_head: prioq not protected!' at line 185 in file
/usr/src/lib/libc_r/uthread/uthread_priority_queue.c (errno = 22)
Abort (core dumped)
I have recompiled openldap and db3 but it didn't help. Any suggestions
would be
Quoting Julian Elischer [EMAIL PROTECTED]:
| threads is broken right now..
| due to a miscommunicatin,. the kernel and the threads library have
| a disagreement regarding something..
| Unfortunatly the person to slap up over this is offline for aday or
| so..
| please be patient for a day
Quoting Wesley Morgan [EMAIL PROTECTED]:
| Boot from a kernel from a day or two ago and you should be fine. Unless
| you build every day, your kernel.old/kernel should be in agreement with
| libc_r
I do build everyday and
Thanks,
ed
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
Quoting Frode Nordahl [EMAIL PROTECTED]:
| Hello,
|
| As some of you may know, Opera has a native FreeBSD version of Opera in
| the works!
|
| http://web.opera.com/download/unix/untested/intel-freebsd/248-20020923-6.1-P1/
|
| (Beware: the shared version requires qt-3.0.4, and will not
Quoting Niels Chr. Bank-Pedersen [EMAIL PROTECTED]:
| On Sat, Sep 28, 2002 at 05:55:02PM +0100, Mark Murray wrote:
| Hi
|
| I can't boot a kernel after my 22nd Sept one. The ATA disk controller
| does not probe at all, and no bootable disk is found by the kernel.
|
| The machine
I just compiled apache1.3.17 modssl from ports and it prefers to dump core than
run. I tried apache13 (same sources) and it runs fine. Looks like there may be
an issue with mod_ssl-2.8.0-1.3.17. Shoot, I just realized that I forgot to
test it without ssl:-( I'll recompile it and and try it
I've got the same problem on my laptop.
Quoting Coleman Kane [EMAIL PROTECTED]:
So, do you need me to do anything or just wait until it gets worked out?
Bruce Evans had the audacity to say:
On Mon, 19 Feb 2001, Coleman Kane wrote:
Yeah, this seems to be broken across all
Quoting Harti Brandt [EMAIL PROTECTED]:
On Mon, 19 Feb 2001, Edwin Culp wrote:
Reverting /usr/src/sys/conf/kmod.mk to rev. 1.90 fixes the problem for
the moment.
harti
Thanks, I'll do that right now.
ed
-
EnContacto.Net - CafeMania.Net
I have a kernel that hangs at boot, so when I try to boot kernel.old, I
have a problem. At the Default: F1 prompt, I give it an F1 and then the
space key give me
FreeBSD/i386 BOOT
Default: 0:wd(o,a)/boot/loader
boot: _
What do I put at the boot prompt. I think the changes of the
I am in the process of trying to get all my current machines on the same
page and I am finding a very strange problem. In theory, the machines
were/are configured almost exactly the same with the same applications
and versions. Now as I finish updating them about half (2 and 2 right
ow)
I just found something new in current. When I rebooted with todays current, it
put me into single user with the following message:
mount: /dev/ad0s1e: File name too long
The problem seems to be the directory that I have been mounting it under for a
couple of years. /var/ftp/release If I
1 - 100 of 168 matches
Mail list logo
