Hi all,
recently I upgraded my kernel to the last version ( Aug 28 now, before was
runing Aug 5 version ), and I startet to get error like this:
Aug 27 17:03:23 pilkishome kernel: ad4: WARNING - WRITE_DMA recovered from
missing interrupt
Aug 27 17:03:23 pilkishome kernel: ad4: WARNING - WRITE_DMA
do over ssh remotely, but same thing
happened via console and even when booting on the starting up services.
- Original Message -
From: Soren Schmidt
To: Putinas
Cc: [EMAIL PROTECTED]
Sent: Thursday, August 28, 2003 13:43 PM
Subject: Re: Sil3112 dma errors
It seems Putinas wrote:
Hi
about notebooks and acpi ...
Best regards,
Putinas Piliponis
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
and without ping -f from other server,
but just makes things faster... I have cvsup'ed again and will try to rebuild world
again tonight.
- Original Message -
From: Soren Schmidt
To: Putinas
Cc: [EMAIL PROTECTED]
Sent: Thursday, August 28, 2003 14:58 PM
Subject: Re: Sil3112
WARNING: /var was not properly dismounted
- Original Message -
From: Andre Guibert de Bruet
To: Putinas
Cc: [EMAIL PROTECTED]
Sent: Friday, August 29, 2003 22:28 PM
Subject: Re: sony vaio pcg-gr390
On Fri, 29 Aug 2003, Putinas wrote:
I tried to check might be my problem with choppy
looks like and my problem with sil 3112 which still exist...
- Original Message -
From: Daniel Rock
To: Soren Schmidt
Cc: [EMAIL PROTECTED]
Sent: Wednesday, September 03, 2003 16:15 PM
Subject: Re: ATAng probe updated please test
Just an additional notice: Booting in PIO mode (by
computers with nearly similar custom
kernel configuration
Could you tell me, what's causing the problem ?
* If needed I can submit my kernel configuration *
Regards,
Putinas Piliponis
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman
RANDOM_IP_ID
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
options DUMMYNET
options BRIDGE
options DEVICE_POLLING
- Original Message -
From: Mark Murray
To: Putinas
Cc: [EMAIL PROTECTED]
Sent: Thursday, September 04, 2003 12:40 PM
Subject: Re
But I wonder, what sysctl has to do with hardware ?
- Original Message -
From: Doug Barton
To: Putinas
Cc: [EMAIL PROTECTED] ; Mark Murray
Sent: Thursday, September 04, 2003 18:30 PM
Subject: Re: Entropy harvesting: interrupts ethernet point_to_point
-BEGIN PGP
Hi all, maybe not really proper mailling list, I just cvsuped 4.9 prerelease
and funny thing with syslog
this is newsyslog.conf
/var/log/httpd-referer.log 644 20*$M1D0 BZ /var/run/httpd.pid
30
this is newsyslog -v output
/var/log/httpd-referer.log 20Z: -- will
I started to get panic in ufs after few system crashes, and what I found what to run
fsck once is not enough. After crash I had to run 3 times fsck -y until it stoped
saying about any error ( only 4th pass was ok ). I just was wondering is it meant to
be like this ?
- Original Message
Since Adapted 1210SA is based on Sil3112A controller I still also have same problem
what I reported few weeks before with my onboard sil3112a controller.
tested tonight with fresh kernel
- Original Message -
From: Soren Schmidt [EMAIL PROTECTED]
To: Derek Ragona [EMAIL PROTECTED]
Cc:
August
Best regards,
Putinas
- Original Message -
From: Soren Schmidt [EMAIL PROTECTED]
To: Derek Ragona [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Saturday, September 20, 2003 10:07
Subject: Re: SATA drive lock-up
It seems Derek Ragona wrote:
I have a single SATA drive
ad4: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad4
ata3-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin
- Original Message -
From: Soren Schmidt [EMAIL PROTECTED]
To: Derek Ragona [EMAIL PROTECTED]
Cc: Putinas [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Thursday, September 25
think
off it would be to use atacontrol _before_ the installation to create
exactly same stripe, and probably then I would see real filesystems on ar0.
Or maybe there is any other way of easy ( or not ) doing this ?
Regards,
Putinas Piliponis
___
[EMAIL
there is no atacontrol...
- Original Message -
From: Doug White [EMAIL PROTECTED]
To: Putinas [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, October 14, 2003 18:18 PM
Subject: Re: sata stripe dual boot
On Tue, 14 Oct 2003, Putinas wrote:
Just a quick question, I have setup
if you use portupgrade and you want to pass make arguments you should look at
/usr/local/etc/pkgtools.conf
my example :
MAKE_ARGS = {
'irc/bitchx-*' = 'WITH_SSL=1 WITH_IPV6=1',
'net/samba*' = 'WITHOUT_CUPS=1',
'databases/mysql323-server*' = 'SKIP_INSTALL_DB=1',
Hi all,
I had today to format a lot of floppy disks and wanted to speed up things
with connecting second floppy disk drive to my desktop, but with no sucsess
... Here is what I got when I try to fdformat /dev/da0 , detach, attach
device :
( in case you need full dmesg is attached )
You can use a freebsd-current snapshot ( ftp://current.freebsd.org ) or wait for
5.2-RELEASE. Maybe this will be supported in coming 4.9-RELEASE but this I don't know.
- Original Message -
From: Anton Savoschik [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, October 27, 2003
I do software raid with atacontrol, and I believe it will boot even if one hard disk
fails.
here are my disk configuration:
ar0: 57241MB ATA RAID1 array [7297/255/63] status: READY subdisks:
0 READY ad0: 57241MB WDC WD600AB-22CBA1 [116301/16/63] at ata0-master UDMA100
1 READY ad2:
Hi,
I just cvsuped and when I do
make buildkernel I get this:
cc -c -O -pipe -march=pentium4 -Wall -Wredundant-decls -Wnested-externs -Wst
rict
-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -ffo
rmat
-extensions -std=c99 -g -nostdinc -I- -I. -I/usr/src/sys
21 matches
Mail list logo
