Re: No amdtemp sysctls, acpi errors, AMD Ryzen 5 2400G

2018-11-13 Thread Daniel Eischen
On Tue, 13 Nov 2018, Conrad Meyer wrote: On Tue, Nov 13, 2018 at 6:26 PM Daniel Eischen wrote: I've attached it. If it gets filtered by the mail list, I'll make it http accessible. Thanks Daniel. It looks like your hostbridge zero device has a different device id than in my first

Re: No amdtemp sysctls, acpi errors, AMD Ryzen 5 2400G

2018-11-13 Thread Daniel Eischen
On Tue, 13 Nov 2018, Conrad Meyer wrote: Hi Daniel, On Tue, Nov 13, 2018 at 10:01 AM Daniel Eischen wrote: Greetings, I'm trying to track down a couple of things. amdtemp doesn't report any temperature sensors, and acpi seems to have some errors. Not sure if they are related. Maybe

Re: No amdtemp sysctls, acpi errors, AMD Ryzen 5 2400G

2018-11-13 Thread Daniel Eischen
> On Nov 13, 2018, at 2:06 PM, Rozhuk Ivan wrote: > > On Tue, 13 Nov 2018 12:59:59 -0500 (EST) > Daniel Eischen wrote: > >> I'm trying to track down a couple of things. amdtemp doesn't >> report any temperature sensors, and acpi seems to have some >> erro

Re: No amdtemp sysctls, acpi errors, AMD Ryzen 5 2400G

2018-11-13 Thread Daniel Eischen
> On Nov 13, 2018, at 4:02 PM, Stefan Ehmann wrote: > >> On 11/13/18 8:59 PM, Daniel Eischen wrote: >>> On Tue, 13 Nov 2018, Greg V wrote: >>> >>> >>> >>> On Tue, Nov 13, 2018 at 8:59 PM, Daniel Eischen >>> wrote: >

Re: No amdtemp sysctls, acpi errors, AMD Ryzen 5 2400G

2018-11-13 Thread Daniel Eischen
On Tue, 13 Nov 2018, Greg V wrote: On Tue, Nov 13, 2018 at 8:59 PM, Daniel Eischen wrote: Greetings, I'm trying to track down a couple of things. amdtemp doesn't report any temperature sensors, and acpi seems to have some errors. Not sure if they are related. These are the ACPI-related

No amdtemp sysctls, acpi errors, AMD Ryzen 5 2400G

2018-11-13 Thread Daniel Eischen
Greetings, I'm trying to track down a couple of things. amdtemp doesn't report any temperature sensors, and acpi seems to have some errors. Not sure if they are related. These are the ACPI-related warnings and errors during boot. Firmware Warning (ACPI): Optional FADT field

Re: Graphics open-source-friendliness, AMD Ryzen vs. Intel

2018-11-11 Thread Daniel Eischen
>> On Nov 11, 2018, at 9:03 PM, Johannes Dieterich >> wrote: >> >> On Sun, Nov 11, 2018 at 4:48 PM Johannes Lundberg wrote: >> >> I have an AMD Ryzen 3 2200G (with Vega graphics) and it panics all the time >> with references to various memory access errors (use after free among >> other).

Re: Current status of Ryzen (non-)support

2018-10-22 Thread Daniel Eischen
Sent from my iPhone > On Oct 22, 2018, at 6:00 PM, Hannes Hauswedell wrote: > >> On 21.10.18 19:33, Konstantin Belousov wrote: >>> On Sun, Oct 21, 2018 at 06:09:50PM +0200, Hannes Hauswedell wrote: >>> Hi everyone, >>> >>> I wanted to ask what the current status of Ryzen support is and/or

Re: OpenSSL 1.1.1 libssl.so version number

2018-10-14 Thread Daniel Eischen
> On Oct 14, 2018, at 2:00 AM, Don Lewis wrote: > >> On 12 Oct, Don Lewis wrote: >> Prior to the OpenSSL 1.1.1 import, the base OpenSSL library was >> /usr/lib/libssl.so.8. The security/openssl port (1.0.2p) installed >> ${LOCALBASE}/lib/ilbssl.so.9 and the security/openssl-devel port >>

Re: OpenSSL 1.1.1 libssl.so version number

2018-10-13 Thread Daniel Eischen
> On Oct 12, 2018, at 10:58 PM, Cy Schubert wrote: > > In message , Don Lewis writes: >> Prior to the OpenSSL 1.1.1 import, the base OpenSSL library was >> /usr/lib/libssl.so.8. The security/openssl port (1.0.2p) installed >> ${LOCALBASE}/lib/ilbssl.so.9 and the security/openssl-devel port >>

Re: [RFC] Deprecation and removal of the drm2 driver

2018-05-31 Thread Daniel Eischen
On Thu, 31 May 2018, Konstantin Belousov wrote: On Thu, May 31, 2018 at 08:34:44AM +0100, Johannes Lundberg wrote: We're not replacing anything. We are moving the older drm1 and drm2 from kernel to ports to make it easier for the majority of the users to load the correct driver without

Re: [RFC] Deprecation and removal of the drm2 driver

2018-05-18 Thread Daniel Eischen
> On May 18, 2018, at 6:27 PM, Cy Schubert <cy.schub...@cschubert.com> wrote: > > In message <pine.gso.4.64.1805181617250.21...@sea.ntplx.net>, Daniel > Eischen wr > ites: >>> On Fri, 18 May 2018, Warner Losh wrote: >>> >>>

Re: [RFC] Deprecation and removal of the drm2 driver

2018-05-18 Thread Daniel Eischen
On Fri, 18 May 2018, Warner Losh wrote: On Fri, May 18, 2018 at 1:30 PM, Steve Kargl < s...@troutmask.apl.washington.edu> wrote: Check the Makefiles % more /usr/ports/graphics/drm-next-kmod/Makefile ONLY_FOR_ARCHS= amd64 ONLY_FOR_ARCHS_REASON= the new KMS components are only supported on

Re: NanoBSD (Was Re: [CFT] packaging the base system with pkg(8))

2016-04-24 Thread Daniel Eischen
On Sun, 24 Apr 2016, Warner Losh wrote: On Sun, Apr 24, 2016 at 6:34 AM, Daniel Eischen <deisc...@freebsd.org> wrote: On Sat, 23 Apr 2016, Warner Losh wrote: On Sat, Apr 23, 2016 at 7:51 AM, Daniel Eischen <deisc...@freebsd.org> wrote: [CC trimmed] On Fri, 22 Apr 2016, Warne

Re: NanoBSD (Was Re: [CFT] packaging the base system with pkg(8))

2016-04-24 Thread Daniel Eischen
On Sat, 23 Apr 2016, Warner Losh wrote: On Sat, Apr 23, 2016 at 7:51 AM, Daniel Eischen <deisc...@freebsd.org> wrote: [CC trimmed] On Fri, 22 Apr 2016, Warner Losh wrote: I personally will be refraining from engaging further. I plan on seeing what gaps there are by adding s

NanoBSD (Was Re: [CFT] packaging the base system with pkg(8))

2016-04-23 Thread Daniel Eischen
[CC trimmed] On Fri, 22 Apr 2016, Warner Losh wrote: I personally will be refraining from engaging further. I plan on seeing what gaps there are by adding support to NanoBSD for packages. I'll be busy with that. In talking to Glen and others, we've already identified a few easy gaps to fill.

Re: [CFT] packaging the base system with pkg(8)

2016-04-20 Thread Daniel Eischen
On Wed, 20 Apr 2016, Allan Jude wrote: On 2016-04-20 01:12, Daniel Eischen wrote: For one of our Solaris 11 boxes, which also serves as a VNC thin client server and NFS server, we have: [sol11] $ pkg list | wc -l 968 That server includes the gnome desktop, firefox, thunderbird, perl

Re: [CFT] packaging the base system with pkg(8)

2016-04-19 Thread Daniel Eischen
On Wed, 20 Apr 2016, Julian Elischer wrote: my problem with 400 packages is that is is hard to decide what you are actually running.. or is it FreeBSD 11? is it FreeBSD 10.95342453? you have no way to tell exactly what you have without comparing all the packages to a known list. uname

Re: [CFT] packaging the base system with pkg(8)

2016-04-19 Thread Daniel Eischen
On Tue, 19 Apr 2016, Russell L. Carter wrote: What is missing from this debate is some perspective from the POV of actually existing packaging systems. I've been maintaining debian-stable + debian-testing systems for over 15 years. The number of packaging glitches I've had I can count on one

Re: [CFT] packaging the base system with pkg(8)

2016-03-13 Thread Daniel Eischen
On Sat, 12 Mar 2016, Bryan Drewery wrote: On 3/11/16 9:01 AM, Daniel Eischen wrote: On Fri, 11 Mar 2016, Slawa Olhovchenkov wrote: On Fri, Mar 11, 2016 at 01:05:11PM +0100, Baptiste Daroussin wrote: On Tue, Mar 08, 2016 at 05:35:59PM +, David Chisnall wrote: On 8 Mar 2016, at 15:14

Re: [CFT] packaging the base system with pkg(8)

2016-03-11 Thread Daniel Eischen
On Fri, 11 Mar 2016, Slawa Olhovchenkov wrote: On Fri, Mar 11, 2016 at 01:05:11PM +0100, Baptiste Daroussin wrote: On Tue, Mar 08, 2016 at 05:35:59PM +, David Chisnall wrote: On 8 Mar 2016, at 15:14, Slawa Olhovchenkov wrote: In terms of comparing packages, if

Cross-building for i386 from amd64

2016-01-25 Thread Daniel Eischen
Is cross-building world for i386 from amd64 suppose to work? It doesn't in -stable. From reading the documentation out there, one of these should work: make TARGET=i386 buildworld make TARGET_ARCH=i386 buildworld What incantations do I need? The end result is I want multiple developers

Re: Cross-building for i386 from amd64

2016-01-25 Thread Daniel Eischen
On Mon, 25 Jan 2016, Daniel Eischen wrote: Is cross-building world for i386 from amd64 suppose to work? It doesn't in -stable. From reading the documentation out there, one of these should work: make TARGET=i386 buildworld make TARGET_ARCH=i386 buildworld What incantations do I need

Re: librt symbol versioning breakage (was Re: Build failure, undefined reference to __mq_oshandle)

2015-12-03 Thread Daniel Eischen
On Mon, 30 Nov 2015, Konstantin Belousov wrote: On Sun, Nov 29, 2015 at 12:27:40PM -0500, Daniel Eischen wrote: On Sun, 29 Nov 2015, Konstantin Belousov wrote: On Sun, Nov 29, 2015 at 01:23:04AM -0500, Daniel Eischen wrote: So I found out that sometime in the last year or so, symbol

Re: librt symbol versioning breakage (was Re: Build failure, undefined reference to __mq_oshandle)

2015-11-29 Thread Daniel Eischen
On Sun, 29 Nov 2015, Konstantin Belousov wrote: On Sun, Nov 29, 2015 at 01:23:04AM -0500, Daniel Eischen wrote: On Fri, 27 Nov 2015, Daniel Eischen wrote: Damn, please use deisc...@freebsd.org for replies. On Fri, 27 Nov 2015, Daniel Eischen wrote: On Fri, 27 Nov 2015, Daniel Eischen

librt symbol versioning breakage (was Re: Build failure, undefined reference to __mq_oshandle)

2015-11-28 Thread Daniel Eischen
On Fri, 27 Nov 2015, Daniel Eischen wrote: Damn, please use deisc...@freebsd.org for replies. On Fri, 27 Nov 2015, Daniel Eischen wrote: On Fri, 27 Nov 2015, Daniel Eischen wrote: $ uname -a FreeBSD vega 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r277320: Mon Jan 19 09:02:50 EST 2015 deischen

Build failure, undefined reference to __mq_oshandle

2015-11-27 Thread Daniel Eischen
$ uname -a FreeBSD vega 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r277320: Mon Jan 19 09:02:50 EST 2015 deischen@vega:/usr/FreeBSD/svn/obj/usr/FreeBSD/svn/src/sys/vega amd64 Upgrading to today's current, 'rm -rf /usr/obj/*; make -j8 buildworld' fails here: ===> lib/libc/tests/gen/execve

Re: Build failure, undefined reference to __mq_oshandle

2015-11-27 Thread Daniel Eischen
On Fri, 27 Nov 2015, Daniel Eischen wrote: $ uname -a FreeBSD vega 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r277320: Mon Jan 19 09:02:50 EST 2015 deischen@vega:/usr/FreeBSD/svn/obj/usr/FreeBSD/svn/src/sys/vega amd64 Upgrading to today's current, 'rm -rf /usr/obj/*; make -j8 buildworld' fails

Re: Build failure, undefined reference to __mq_oshandle

2015-11-27 Thread Daniel Eischen
Damn, please use deisc...@freebsd.org for replies. On Fri, 27 Nov 2015, Daniel Eischen wrote: On Fri, 27 Nov 2015, Daniel Eischen wrote: $ uname -a FreeBSD vega 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r277320: Mon Jan 19 09:02:50 EST 2015 deischen@vega:/usr/FreeBSD/svn/obj/usr/FreeBSD/svn/src

Re: Upgrading to r297291 LAGG(4) stops working.

2015-09-06 Thread Daniel Eischen
the time). On Fri, 4 Sep 2015, Daniel Eischen wrote: On Fri, 4 Sep 2015, Sergey Kandaurov wrote: On 1 September 2015 at 04:47, John Baldwin <j...@freebsd.org> wrote: On Monday, August 31, 2015 09:58:45 AM Adrian Chadd wrote: Hi, +glebius, as he recently messed around with the wifi stack a

Re: Upgrading to r297291 LAGG(4) stops working.

2015-09-04 Thread Daniel Eischen
On Fri, 4 Sep 2015, Sergey Kandaurov wrote: On 1 September 2015 at 04:47, John Baldwin wrote: On Monday, August 31, 2015 09:58:45 AM Adrian Chadd wrote: Hi, +glebius, as he recently messed around with the wifi stack and his changes may have broken how mac addresses are

Re: Upgrading to r297291 LAGG(4) stops working.

2015-08-31 Thread Daniel Eischen
On Mon, 31 Aug 2015, Adrian Chadd wrote: Hi, Because it works by magic, not works by intent. There's no guarantee that a STA device will let you re-program its MAC address. As long as an attempt to set the MAC address returns an error that is meaningful (ENOTSUP?), that is fine. I still

Re: Upgrading to r297291 LAGG(4) stops working.

2015-08-31 Thread Daniel Eischen
On Mon, 31 Aug 2015, Ranjan1018 . wrote: 2015-08-30 17:12 GMT+02:00 Adrian Chadd : hi, don'tr set ath0 to the MAC of your ethernet device, set your ethernet MAC to the MAC of your atheros device. (But I keep telling people, failover between ethernet/wifi isn't

Re: SSE in libthr

2015-03-27 Thread Daniel Eischen
On Fri, 27 Mar 2015, Eric van Gyzen wrote: In a nutshell: Clang emits SSE instructions on amd64 in the common path of pthread_mutex_unlock. This reduces performance by a non-trivial amount. I'd like to disable SSE in libthr. This makes sense to me. -- DE

Re: default pager (csh)

2015-02-19 Thread Daniel Eischen
On Thu, 19 Feb 2015, Ian Lepore wrote: On Thu, 2015-02-19 at 07:46 +0100, Franco Fichtner wrote: On 19 Feb 2015, at 02:27, Davide Italiano dav...@freebsd.org wrote: On Wed, Feb 18, 2015 at 5:18 PM, Adam McDougall mcdou...@egr.msu.edu wrote: The PAGER was less for about half a year and

Re: default pager (csh)

2015-02-19 Thread Daniel Eischen
On Thu, 19 Feb 2015, Alfred Perlstein wrote: Not as annoying as people who don't search the web for an answer for things. ~ % export PAGER=less -X everyone please stop crying over small changes, it really sucks. Not sure what you are saying, but the question posed is changing the default

Re: libthr and main thread stack size

2014-09-22 Thread Daniel Eischen
On Sun, 21 Sep 2014, Julian Elischer wrote: On 9/20/14, 3:27 AM, John Baldwin wrote: On Tuesday, September 16, 2014 11:13:24 AM Konstantin Belousov wrote: On Mon, Sep 15, 2014 at 03:47:41PM -0600, Justin T. Gibbs wrote: On Aug 8, 2014, at 5:22 AM, Konstantin Belousov kostik...@gmail.com

RE: shells/bash port, add a knob which symlinks to /bin/bash ?

2014-09-12 Thread Daniel Eischen
On Fri, 12 Sep 2014, Rang, Anton wrote: If you want interoperability just use /usr/bin/env bash as a shebang. That doesn't work for this use case -- the user shell coming from LDAP -- but I agree that the port shouldn't be modifying /usr/bin. It's easy enough to add the symlink manually

Re: did tar(1) loose xz compression support in 11?

2014-08-27 Thread Daniel Eischen
On Wed, 27 Aug 2014, Warren Block wrote: On Tue, 26 Aug 2014, Daniel Eischen wrote: The man page is a little confusing. Here it says: --options options Select optional behaviors for particular modules. The argument is a text string containing comma-separated keywords

Re: did tar(1) loose xz compression support in 11?

2014-08-26 Thread Daniel Eischen
On Tue, 26 Aug 2014, Tim Kientzle wrote: On Aug 26, 2014, at 11:05 AM, Chris H bsd-li...@bsdforge.com wrote: Greetings, I'm currently testing 11. My build / install is from about 2 days ago. I generally use xz compression, when creating archives. But when I attempt the following: tar -cvJ

Re: login.conf -- UTF-8

2014-04-02 Thread Daniel Eischen
On Thu, 3 Apr 2014, Steve Wills wrote: On Wed, Apr 02, 2014 at 03:56:35PM -0700, Sean Bruno wrote: On Wed, 2014-04-02 at 18:06 -0400, Garrett Wollman wrote: In article 1396457629.2280.2.ca...@powernoodle.corp.yahoo.com, sbr...@freebsd.org writes: I'd like to make this change to login.conf

Re: new Xorg (KMS, etc.) for Radeon 9600

2013-11-10 Thread Daniel Eischen
On Sun, 10 Nov 2013, d...@gmx.com wrote: I've built the ports with the following lines in my /etc/make.conf: WITH_NEW_XORG=1 WITH_KMS=1 WITH_GALLIUM=1 And I've attempted to run ``startx''. My -current is still from ~July 3, and I also got panics when trying new Xorg. Take the drm devices

Re: new Xorg (KMS, etc.) for Radeon 9600

2013-11-10 Thread Daniel Eischen
On Nov 10, 2013, at 12:20 PM, d...@gmx.com wrote: Daniel Eischen wrote, On 11/10/2013 17:40: My -current is still from ~July 3, and I also got panics when trying new Xorg. Take the drm devices out of your kernel configuration and let X load the necessary drm2 devices when it starts

Re: [Heads Up] RCS removed from base

2013-10-08 Thread Daniel Eischen
On Tue, 8 Oct 2013, Cy Schubert wrote: I've started work on a port (not that this was my highest priority but received a private email that I may want to do this instead of rcs57). Would the majority here rather have it in base? Just finished schlepping the OpenBSD source to my laptop (the link

Re: Question about socket timeouts

2013-08-19 Thread Daniel Eischen
On Mon, 19 Aug 2013, Adrian Chadd wrote: Yes! Please file a PR! This sorta implies that both are acceptable (although, the Linux behavior seems more desirable). http://austingroupbugs.net/view.php?id=369 On 19 August 2013 12:33, Vitja Makarov vitja.maka...@gmail.com wrote: Hi!

Re: openjdk6 broken on current

2013-05-08 Thread Daniel Eischen
On Wed, 8 May 2013, Larry Rosenman wrote: Daniel Eischen deisc...@freebsd.org wrote: On Wed, 8 May 2013, Larry Rosenman wrote: Can SOMEONE please look at this? I have a real need to get java back on my -CURRENT server soon. Did/can you try just backing out r249606? -- DE How can I

Re: openjdk6 broken on current

2013-05-08 Thread Daniel Eischen
On Wed, 8 May 2013, Daniel Eischen wrote: On Wed, 8 May 2013, Larry Rosenman wrote: Daniel Eischen deisc...@freebsd.org wrote: On Wed, 8 May 2013, Larry Rosenman wrote: Can SOMEONE please look at this? I have a real need to get java back on my -CURRENT server soon. Did/can you try just

Re: openjdk6 broken on current

2013-05-08 Thread Daniel Eischen
On Wed, 8 May 2013, Larry Rosenman wrote: Can SOMEONE please look at this? I have a real need to get java back on my -CURRENT server soon. Did/can you try just backing out r249606? -- DE ___ freebsd-current@freebsd.org mailing list

Re: Any objections/comments on axing out old ATA stack?

2013-03-28 Thread Daniel Eischen
On Thu, 28 Mar 2013, Ian Lepore wrote: On Thu, 2013-03-28 at 09:17 +0200, Alexander Motin wrote: On 28.03.2013 02:43, Adrian Chadd wrote: My main concern with the new stuff is that it requires CAM and that's reasonably big compared to the standalone ATA code. It'd be nice if we could slim

Re: X220 loses keyboard when Logitech USB wireless adaptor is unplugged

2013-03-25 Thread Daniel Eischen
On Mon, 25 Mar 2013, Erich Dollansky wrote: Hi, On Mon, 25 Mar 2013 19:21:05 +0700 Erich Dollansky er...@alogt.com wrote: As you can see, I took the adaptor connected to ugne0.3 out. In addition, the keyboard ukbd0 was disconnected too. When I put the adaptor back in, the keyboard comes back

Re: USB not working

2013-02-25 Thread Daniel Eischen
On Mon, 25 Feb 2013, Hans Petter Selasky wrote: On Sunday 24 February 2013 20:31:52 Daniel Eischen wrote: Hey, I've got a Dell Inspiron 15R Special Edition and haven't had working USB since first installing FreeBSD on it. I'm currently at r247154. When I insert a flash drive (which works

Re: USB not working

2013-02-25 Thread Daniel Eischen
On Mon, 25 Feb 2013, Hans Petter Selasky wrote: On Monday 25 February 2013 15:01:24 Daniel Eischen wrote: On Mon, 25 Feb 2013, Hans Petter Selasky wrote: On Sunday 24 February 2013 20:31:52 Daniel Eischen wrote: Hey, I've got a Dell Inspiron 15R Special Edition and haven't had working USB

Re: USB not working

2013-02-25 Thread Daniel Eischen
On Mon, 25 Feb 2013, Daniel Eischen wrote: On Mon, 25 Feb 2013, Hans Petter Selasky wrote: On Monday 25 February 2013 15:01:24 Daniel Eischen wrote: On Mon, 25 Feb 2013, Hans Petter Selasky wrote: Try to set: sysctl hw.usb.xhci.xhci_port_route=-1 In /boot/loader.conf I see you have

Re: USB not working

2013-02-25 Thread Daniel Eischen
On Mon, 25 Feb 2013, Hans Petter Selasky wrote: On Monday 25 February 2013 15:32:26 Daniel Eischen wrote: On Mon, 25 Feb 2013, Hans Petter Selasky wrote: On Monday 25 February 2013 15:01:24 Daniel Eischen wrote: On Mon, 25 Feb 2013, Hans Petter Selasky wrote: On Sunday 24 February 2013 20

USB not working

2013-02-24 Thread Daniel Eischen
Hey, I've got a Dell Inspiron 15R Special Edition and haven't had working USB since first installing FreeBSD on it. I'm currently at r247154. When I insert a flash drive (which works fine on my desktop -current system), it is not recognized. I've tried multiple different USB drives (external

WITHOUT_CLANG_IS_CC: There and back again

2013-02-22 Thread Daniel Eischen
In trying to debug an unrelated problem, I switched CC from Clang back to GCC. I had a -current kernel and world r247050 built and installed with Clang as the system compiler I have nothing special in /etc/make.conf: BATCH=yes WITH_NEW_XORG=true WITH_KMS=true WITH_PKGNG=yes

Re: WITHOUT_CLANG_IS_CC: There and back again

2013-02-22 Thread Daniel Eischen
On Fri, 22 Feb 2013, Dimitry Andric wrote: On 2013-02-22 22:30, Daniel Eischen wrote: In trying to debug an unrelated problem, I switched CC from Clang back to GCC. I had a -current kernel and world r247050 built and installed with Clang as the system compiler I have nothing special in /etc

Re: Clang as default compiler November 4th

2012-09-11 Thread Daniel Eischen
On Tue, 11 Sep 2012, Konstantin Belousov wrote: On Tue, Sep 11, 2012 at 02:06:49PM +0200, Roman Divacky wrote: We currently dont compile 4680 ports (out of 23857). Top 10 ports that prevent the most other ports from compiling together prevent ports from compilation. So if we fixed those

Re: Clang as default compiler November 4th

2012-09-10 Thread Daniel Eischen
On Mon, 10 Sep 2012, Brooks Davis wrote: [Please confine your replies to toolch...@freebsd.org to keep the thread on the most relevant list.] For the past several years we've been working towards migrating from GCC to Clang/LLVM as our default compiler. We intend to ship FreeBSD 10.0 with

Re: rtld or lang/gcc cannot find libgcc_s.so.1

2012-02-21 Thread Daniel Eischen
On Tue, 21 Feb 2012, Steve Kargl wrote: On Tue, Feb 21, 2012 at 05:00:53PM -0500, Diane Bruce wrote: On Tue, Feb 21, 2012 at 10:37:15PM +0100, Dimitry Andric wrote: On 2012-02-21 20:42, Steve Kargl wrote: ... Yes, /lib comes before /usr/local/lib/gcc46. I suppose that this is a heads up for

Re: CVS removal from the base

2011-12-05 Thread Daniel Eischen
On Mon, 5 Dec 2011, Julian Elischer wrote: On 12/4/11 9:21 PM, Daniel Eischen wrote: On Dec 4, 2011, at 7:42 PM, Julian Elischerjul...@freebsd.org wrote: On 12/4/11 3:36 PM, Randy Bush wrote: This seems too reasonable a suggestion, but, as always, the devil is in the details

Re: CVS removal from the base

2011-12-04 Thread Daniel Eischen
On Sat, 3 Dec 2011, Doug Barton wrote: On 12/3/2011 5:03 AM, sth...@nethelp.no wrote: The fact that we have so many people who are radically change-averse, no matter how rational the change; is a bug, not a feature. This particular bug is complicated dramatically by the fact that the majority

Re: CVS removal from the base

2011-12-04 Thread Daniel Eischen
On Dec 4, 2011, at 7:42 PM, Julian Elischer jul...@freebsd.org wrote: On 12/4/11 3:36 PM, Randy Bush wrote: This seems too reasonable a suggestion, but, as always, the devil is in the details. There will be long. painful discussions (and arguments) about what to remove from the base to the

Re: CVS removal from the base

2011-12-03 Thread Daniel Eischen
On Sat, 3 Dec 2011, Max Khon wrote: Hello! On Sat, Dec 3, 2011 at 8:03 PM, sth...@nethelp.no wrote: I use CVS (or rather csup) to keep the base system up to date. I would be perfectly okay with using a different utility - however, I would strongly prefer that this utility was included in

Re: Has ath(4) ever worked one release and not worked another, please poke me..

2011-09-12 Thread Daniel Eischen
On Mon, 12 Sep 2011, Adrian Chadd wrote: Hi all, I've had reports here and there from users who have said ath(4) worked for them in a previous release, and then suddenly stopped working. Either it stopped probing at all during boot, or it would probe but then spit out errors when trying to get

Re: ath0 no longer attaches, cardbus problems?

2011-09-10 Thread Daniel Eischen
On Fri, 9 Sep 2011, Warner Losh wrote: On Sep 9, 2011, at 1:22 PM, Daniel Eischen wrote: I found the commit that broke ath for me, r222753, specifically, the change to /dev/cardbus/cardbus_cis.c. To be sure, I updated to head using svn, and applied the patch included below. ath attaches

Re: ath0 no longer attaches, cardbus problems?

2011-09-09 Thread Daniel Eischen
I found the commit that broke ath for me, r222753, specifically, the change to /dev/cardbus/cardbus_cis.c. To be sure, I updated to head using svn, and applied the patch included below. ath attaches and works. Without the patch, ath does not attach. On another note, I've no idea why updating

Re: ath0 no longer attaches, cardbus problems?

2011-09-08 Thread Daniel Eischen
On Thu, 8 Sep 2011, John Baldwin wrote: On Wednesday, September 07, 2011 5:48:01 pm Daniel Eischen wrote: On Wed, 7 Sep 2011, John Baldwin wrote: On Wednesday, September 07, 2011 4:18:25 pm Daniel Eischen wrote: Setting debug.acpi.disabled=hostres in /boot/loader.conf did not help. I

Re: ath0 no longer attaches, cardbus problems?

2011-09-08 Thread Daniel Eischen
On Thu, 8 Sep 2011, John Baldwin wrote: On Thursday, September 08, 2011 1:19:23 pm Daniel Eischen wrote: I suspect you don't really need the pciconf -lb from before r220195 because r220195 works - ath attaches and is at the correct base address (0x8800). So the commit that broke ath

Re: ath0 no longer attaches, cardbus problems?

2011-09-07 Thread Daniel Eischen
On Tue, 6 Sep 2011, John Baldwin wrote: On Tuesday, September 06, 2011 3:34:58 pm Daniel Eischen wrote: On Tue, 6 Sep 2011, John Baldwin wrote: Looks like I had a typo in my original e-mail, try debug.acpi.disabled=hostres rather than debug.acpi.disable=hostres. Ok, I'll try

Re: ath0 no longer attaches, cardbus problems?

2011-09-07 Thread Daniel Eischen
On Wed, 7 Sep 2011, John Baldwin wrote: On Wednesday, September 07, 2011 4:18:25 pm Daniel Eischen wrote: On Tue, 6 Sep 2011, John Baldwin wrote: On Tuesday, September 06, 2011 3:34:58 pm Daniel Eischen wrote: On Tue, 6 Sep 2011, John Baldwin wrote: Looks like I had a typo in my original

Re: ath0 no longer attaches, cardbus problems?

2011-09-06 Thread Daniel Eischen
On Tue, 6 Sep 2011, John Baldwin wrote: On Friday, September 02, 2011 12:27:02 pm Daniel Eischen wrote: On Thu, 25 Aug 2011, Daniel Eischen wrote: [ snip ] Any hopes of getting this cardbus problem fixed? Hmm, the dmesg for the 'hostres' case shows the 'hostres' code as still being

Re: ath0 no longer attaches, cardbus problems?

2011-09-03 Thread Daniel Eischen
On Sep 3, 2011, at 2:02 AM, Adrian Chadd adr...@freebsd.org wrote: On 3 September 2011 12:35, Eitan Adler li...@eitanadler.com wrote: The best way to do this is to find a known working version of the kernel and then bisect the version from the known bad and known good versions until you

Re: ath0 no longer attaches, cardbus problems?

2011-09-02 Thread Daniel Eischen
On Thu, 25 Aug 2011, Daniel Eischen wrote: On Thu, 25 Aug 2011, John Baldwin wrote: On Wednesday, August 24, 2011 8:19:42 pm Daniel Eischen wrote: Hello, I have an older Dell 4150 laptop that takes forever to build world, so I don't update it that often. The last time I updated

Re: ath0 no longer attaches, cardbus problems?

2011-08-25 Thread Daniel Eischen
On Thu, 25 Aug 2011, Adrian Chadd wrote: On 25 August 2011 08:19, Daniel Eischen deisc...@freebsd.org wrote: I have an older Dell 4150 laptop that takes forever to build world, so I don't update it that often.  The last time I updated it was March 1, 2010.  I just updated the system yesterday

Re: ath0 no longer attaches, cardbus problems?

2011-08-25 Thread Daniel Eischen
On Thu, 25 Aug 2011, John Baldwin wrote: On Wednesday, August 24, 2011 8:19:42 pm Daniel Eischen wrote: Hello, I have an older Dell 4150 laptop that takes forever to build world, so I don't update it that often. The last time I updated it was March 1, 2010. I just updated the system

Re: ath0 no longer attaches, cardbus problems?

2011-08-25 Thread Daniel Eischen
On Thu, 25 Aug 2011, Daniel Eischen wrote: On Thu, 25 Aug 2011, John Baldwin wrote: On Wednesday, August 24, 2011 8:19:42 pm Daniel Eischen wrote: Hello, I have an older Dell 4150 laptop that takes forever to build world, so I don't update it that often. The last time I updated

ath0 no longer attaches, cardbus problems?

2011-08-24 Thread Daniel Eischen
Hello, I have an older Dell 4150 laptop that takes forever to build world, so I don't update it that often. The last time I updated it was March 1, 2010. I just updated the system yesterday and ath0 (a Linksys PCCard) no longer attaches. The interesting thing is that ath0 is detected at

Re: CURRENT /usr/ports

2011-05-26 Thread Daniel Eischen
On Thu, 26 May 2011, Kostik Belousov wrote: On Thu, May 26, 2011 at 10:16:15AM -0400, b. f. wrote: Matthias Apitz: ... I'm running -CURRENT on my laptop (r220692 from ~mid of April) and /usr/ports from CVS from the same day; I want from time to time (let's says once a week) SVN update my

Re: CURRENT /usr/ports

2011-05-26 Thread Daniel Eischen
On Thu, 26 May 2011, Kostik Belousov wrote: On Thu, May 26, 2011 at 12:47:53PM -0400, Daniel Eischen wrote: On Thu, 26 May 2011, Kostik Belousov wrote: On Thu, May 26, 2011 at 10:16:15AM -0400, b. f. wrote: Matthias Apitz: ... I'm running -CURRENT on my laptop (r220692 from ~mid of April

Re: Devices numbering [Was Re: Switch from legacy ata(4) to CAM-based ATA]

2011-04-21 Thread Daniel Eischen
On Thu, 21 Apr 2011, Arnaud Lacombe wrote: Hi, On Thu, Apr 21, 2011 at 1:31 PM, Garrett Cooper yaneg...@gmail.com wrote: Although this may not be a list of fixable issues, here are some observations (in part with the new geom raid infrastructure): 1. Channels are no longer fixed of course

Re: How can I clone a mac address on wlan0?

2011-03-29 Thread Daniel Eischen
On Mon, 28 Mar 2011, Doug Barton wrote: For a variety of boring reasons I need to clone a mac address on wlan0. The documented way to do this: ifconfig wlan0 create wlandev wpi0 wlanaddr 00:11:22:33:44:55:66 works in the sense that it sets up the interface with that mac, but then the wlan0

Re: [WORKAROUND] www/seamonkey2 on CURRENT

2011-01-29 Thread Daniel Eischen
On Sat, 29 Jan 2011, Alexey Shuvaev wrote: Hello! It seems www/seamonkey2 is broken on CURRENT for at least 1 month now [1]. Examining build log and reproducing it locally, the problem is in the usage of libiconv in nsNativeCharsetUtils.cpp. The linker fails to produce libxpcom_core.so

Re: [WORKAROUND] www/seamonkey2 on CURRENT

2011-01-29 Thread Daniel Eischen
On Sat, 29 Jan 2011, Alexander Kabaev wrote: On Sat, 29 Jan 2011 13:21:44 -0500 Alexander Kabaev kab...@gmail.com wrote: On Sat, 29 Jan 2011 13:02:24 -0500 (EST) Daniel Eischen deisc...@freebsd.org wrote: On Sat, 29 Jan 2011, Alexey Shuvaev wrote: Hello! It seems www/seamonkey2 is broken

Re: [WORKAROUND] www/seamonkey2 on CURRENT

2011-01-29 Thread Daniel Eischen
On Sat, 29 Jan 2011, Alexey Shuvaev wrote: And here is the winner: On Sat, Jan 29, 2011 at 08:32:07AM +0300, Anonymous wrote: Alexey Shuvaev shuv...@physik.uni-wuerzburg.de writes: Hello! It seems www/seamonkey2 is broken on CURRENT for at least 1 month now [1]. Examining build log and

Re: HEADSUP: Realtime thread scheduling changed

2011-01-14 Thread Daniel Eischen
On Fri, 14 Jan 2011, John Baldwin wrote: This is just a heads up that I've committed some changes to how the scheduler handles realtime thread priorities. Please let me know of any issues you encounter with nice, rtprio, or idprio. Note that as a result of these changes, rtprio threads will

Re: UDP checksum broken, -head and releng_8

2011-01-08 Thread Daniel Eischen
On Fri, 7 Jan 2011, Daniel Eischen wrote: On Fri, 7 Jan 2011, Daniel Eischen wrote: On Fri, 7 Jan 2011, Bjoern A. Zeeb wrote: On Fri, 7 Jan 2011, Daniel Eischen wrote: When sending multicast packets to a socket that is _not_ bound to the multicast address, this generates bad UDP checksums

Re: UDP checksum broken, -head and releng_8

2011-01-08 Thread Daniel Eischen
On Sat, 8 Jan 2011, Bjoern A. Zeeb wrote: On Sat, 8 Jan 2011, Daniel Eischen wrote: When sending multicast packets to a socket that is _not_ bound to the multicast address, this generates bad UDP checksums. This use to work and was broke sometime between the middle of October and late

UDP checksum broken, -head and releng_8

2011-01-07 Thread Daniel Eischen
When sending multicast packets to a socket that is _not_ bound to the multicast address, this generates bad UDP checksums. This use to work and was broke sometime between the middle of October and late December as far as I can tell. A test program is here:

Re: UDP checksum broken, -head and releng_8

2011-01-07 Thread Daniel Eischen
On Fri, 7 Jan 2011, Bjoern A. Zeeb wrote: On Fri, 7 Jan 2011, Daniel Eischen wrote: When sending multicast packets to a socket that is _not_ bound to the multicast address, this generates bad UDP checksums. This use to work and was broke sometime between the middle of October and late

Re: UDP checksum broken, -head and releng_8

2011-01-07 Thread Daniel Eischen
On Fri, 7 Jan 2011, Daniel Eischen wrote: On Fri, 7 Jan 2011, Bjoern A. Zeeb wrote: On Fri, 7 Jan 2011, Daniel Eischen wrote: When sending multicast packets to a socket that is _not_ bound to the multicast address, this generates bad UDP checksums. This use to work and was broke sometime

Re: CFT: patch for process shared pthread objects

2010-11-30 Thread Daniel Eischen
On Tue, 30 Nov 2010, Anonymous wrote: David Xu davi...@freebsd.org writes: Garrett Cooper wrote: Doesn't build :/...: === lib/libthr (obj,depend,all,install) make: don't know how to make thr_sleepq.c. Stop *** Error code 2 Sorry, I have updated it, please download it again, or just

Re: [TESTING]: ClangBSD branch needs testing before the import to HEAD

2010-05-31 Thread Daniel Eischen
On Mon, 31 May 2010, Robert Watson wrote: I think Kostik's question here is legitimate: clang maturity changes over time. The earlier we adopt it, the sooner we get the advantages of clang -- but we also end up being the people who fault in more of the hard-to-diagnose compiler bugs. Since

Re: Results of BIND RFC

2010-04-02 Thread Daniel Eischen
On Fri, 2 Apr 2010, Kevin Oberman wrote: Date: Fri, 2 Apr 2010 03:14:54 -0700 From: Jeremy Chadwick free...@jdc.parodius.com Sender: owner-freebsd-sta...@freebsd.org I disagree (so what else is new?) It should be kept out of the base system. KISS: Doug pulling BIND out of the base system /

Re: HEADS UP: COMPAT_IA32 renamed COMPAT_FREEBSD32

2010-03-22 Thread Daniel Eischen
[ Some CC's stripped ] On Mon, 22 Mar 2010, M. Warner Losh wrote: P.S. I think that there's much traction to the idea of moving from COMPAT_FREEBSDx to some other variable called, for example, COMPAT_FREEBSD_BACK_TO=x, which will give compatibility for binaries as old as FreeBSD x.0, and have

Re: licq KSE - resolved

2003-12-03 Thread Daniel Eischen
On Wed, 3 Dec 2003, Alexander Motin wrote: Daniel Eischen wrote: From which system is this? The nvidia or the ATI? We know nvidia I try to use same HDD on two systems. On system with ATI video I only disable nvidia kernel module loading and change X driver. Right, it's not only

Re: licq KSE

2003-12-02 Thread Daniel Eischen
On Tue, 2 Dec 2003, Alexander Motin wrote: Daniel Eischen wrote: licq 1.2.7 installed from ports does not works on 5.2-BETA with mapping libc_r to libkse: %licq -d0 -p qt-gui -- -noxim Fatal error 'No current thread. ' at line 318 in file /usr/src/lib/libpthread/thread/thr_sig.c (errno

Re: licq KSE

2003-12-02 Thread Daniel Eischen
On Tue, 2 Dec 2003, Alexander Motin wrote: Daniel Eischen wrote: You haven't told me if you are getting static LDT warnings out of the kernel (check /var/log/messages). If I use libkse I get: kernel: Warning: pid 25341 used static ldt allocation. kernel: See the i386_set_ldt man page

Re: licq KSE

2003-12-02 Thread Daniel Eischen
On Tue, 2 Dec 2003, Alexander Motin wrote: Alexander Motin wrote: If I use libkse I get: kernel: Warning: pid 25341 used static ldt allocation. kernel: See the i386_set_ldt man page for more info in my messages. When I use libc_r I do not get this messages. I'm sorry. Messages

Re: licq KSE

2003-12-02 Thread Daniel Eischen
On Tue, 2 Dec 2003, Mark Dixon wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tuesday 02 Dec 2003 14:05, Daniel Eischen wrote: libthr, libkse, and nvidia drivers/OpenGL use LDTs and %gs. nvidia drivers (and/or their version of OpenGL) stomp on the LDTs/%gs that both libthr

  1   2   3   4   5   >