Re: vinum error: statfs related?

2003-11-17 Thread Eric Anholt
to dump on. Kernel was built using configure MYKERNEL; cd ../compile/MYKERNEL; make depend all install instead of buildkernel. DDB enabled but no invariants/witness, not sure what else from my config might be applicable. -- Eric Anholt[EMAIL PROTECTED

Re: -CURRENT and -STABLE fails on IBM R30 in agp_ali.c

2003-11-11 Thread Eric Anholt
it?) and to have agp_alloc_gatt() just fail instead of panicing in contigmalloc if the aperture size is 0? -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] Index: agp.c

Re: driver problem without lock held

2003-11-11 Thread Eric Anholt
been reported by both FreeBSD and Linux users for several months. Does it prevent the DRI from initializing? Looks like it should. Under what circumstances do you get this error? -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt

Re: Radeon DRM-Problem

2003-11-07 Thread Eric Anholt
think the hangs are related to the error, since Linux people haven't been complaining about hangs. The agp message, however, is something I haven't seen or heard about before. What does dmesg| grep agp say? -- Eric Anholt[EMAIL PROTECTED] http

Re: drm, irqs, etc.

2003-11-05 Thread Eric Anholt
XF86Config? -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send

Re: DRM error messages - easy way to turn them off?

2003-11-03 Thread Eric Anholt
that need libGL to link to libGL. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd

Re: Radeon 7500 w/ DRI locking on restart of X

2003-10-28 Thread Eric Anholt
happens whenever an mpsafe interrupt handler is installed. It gets installed upon initializing the DRI in the server. I don't think any drivers do it more often. It may happen frequently if glxgears is your only app running, in which case you'll get a server regenerate on exit of glxgears. -- Eric

Re: DRM related error

2003-10-26 Thread Eric Anholt
very much. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe

Re: FreeBSD-Current and XFree86

2003-10-24 Thread Eric Anholt
. Solution I suggested was to try chipid 0x4e48 because his is 0x4e49, which is the same generation of chip. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL

Re: fresh -current trap

2003-10-24 Thread Eric Anholt
(going really slow, our internet connection is terrible). Sorry for the trouble everyone. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing

Re: fresh -current trap

2003-10-24 Thread Eric Anholt
, __sysctl), eip = 0x280bed2f, esp = 0xbfbff38c, ebp = 0xbfbff3b8 --- Any idea? I just committed a fix for this to CVS. Sorry for the trouble. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED

Re: FreeBSD-Current and XFree86

2003-10-23 Thread Eric Anholt
. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail

Re: Radeon 7500 w/ DRI locking on restart of X

2003-10-23 Thread Eric Anholt
On Tue, 2003-08-26 at 20:37, Glenn Johnson wrote: On Tue, Aug 26, 2003 at 01:27:11PM -0700, Eric Anholt wrote: On Tue, 2003-08-26 at 18:05, Vulpes Velox wrote: I had similar problem with a 7200 and OGL. I solved the problem by turning off some of the options in the X config

PCI domains?

2003-10-21 Thread Eric Anholt
independent PCI subsystems in the same machine. On linux, you can use pci_name(pdev) to get a truly unique descriptor of the device (within the PCI subsystem). It will look something like :00:02.0 for domain 0, bus 0, device 2, function 0. -- Eric Anholt

Re: PCI domains?

2003-10-21 Thread Eric Anholt
On Tue, 2003-10-21 at 15:42, Scott Long wrote: Eric Anholt wrote: Is there any concept of PCI domains in the kernel? This is for the DRM, while dealing with a complaint from Linus recently: Please fix the fact that modern PCI is _not_ enumerated with just bus, slot, function. A lot

Re: DRM SMPng locking for review

2003-10-19 Thread Eric Anholt
On Thu, 2003-10-16 at 23:03, Eric Anholt wrote: I've been working on locking of the DRM, based off of the work that was already done for linux and ported to BSD. I think the current locking was wrong, including that it used lockmgr and simplelocks on -stable when as far as I know

DRM SMPng locking for review

2003-10-17 Thread Eric Anholt
an error, close doesn't get called, does it? -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman

Re: Problems with XFree86-4

2003-10-14 Thread Eric Anholt
/XFree86-4. I had this same error a week ago, someone have a clue? Fixed yesterday. cvsup and try again. (The fix is in XFree86-4-libraries/files/ and XFree86-4-clients/scripts -- you need to cvs update both before rebuilding -clients) -- Eric Anholt[EMAIL

Re: XFree86-4-clients port broken.

2003-10-13 Thread Eric Anholt
caused this. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe

Re: XFree86-4-clients port broken.

2003-10-13 Thread Eric Anholt
On Mon, 2003-10-13 at 16:05, Peter Wemm wrote: Eric Anholt wrote: On Mon, 2003-10-13 at 15:51, Peter Wemm wrote: David Gilbert wrote: I don't really have a clue where to look for this fix as there seems to be a serious amount of magic going into the divided XFree86-4 port builds

Re: XFree86-4-clients port broken.

2003-10-13 Thread Eric Anholt
/XFree86-4-clients/work/xc/exports/lib/libfntstubs.a. Stop Dave. It should be fixed now. Please cvsup (in ~1hour) and try again. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED

Re: i865 Video Memory

2003-10-11 Thread Eric Anholt
/ You can just run 855patch 8192 before starting X, and suddenly you can do a resolution higher than 640x480 in 8 bit mode ;-) I'm pretty sure code got included in XFree86 a week or so ago to accomplish this. I'll be updating XFree86-4-Server-snap when I can so people can try this out. -- Eric

Re: i386_set_ldt messages with today's world

2003-09-07 Thread Eric Anholt
/modules. That said, I could find nothing about ldts being used anywhere in the source (grepping for LDT, sldt, and set_ldt). Perhaps the nvidia driver is being used? That's the only thing I could think of. -- Eric Anholt[EMAIL PROTECTED] http

Anyone had hangs with Radeon, XF86 4.3.0, and DRI on logout?

2003-04-04 Thread Eric Anholt
. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any

Re: alpha tinderbox failure

2003-02-13 Thread Eric Anholt
' undeclared (first use in this function) *** Error code 1 I'm very sorry about this, I committed only one of the two files. It should be fixed now. As a side note, do any of these AGP chipsets apply to sparc64, alpha, ia64? -- Eric Anholt[EMAIL PROTECTED

Re: buildkernel error on latest cvs src's

2003-02-13 Thread Eric Anholt
' undeclared (first use in this function) Revert sys/pci/agp_i810.c to revision 1.16 and it will all build fine. Or cvsup as of 7 hours ago. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] To Unsubscribe: send

Re: kld problem ? (was: Re: MSDOSFS wastes 256k when nothing ismounted!)

2003-02-09 Thread Eric Anholt
and in loader.conf. In the agp case, it appears to initialize, but then doesn't function when other devices (DRM) try to use it. I would guess it's being initialized twice, too. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED

Re: X compilation problems

2003-02-06 Thread Eric Anholt
not sure about the exact date, but I think it happened about a week or so ago.) Has anyone seen this? How do I fix it? Please remove your nonstandard CFLAGS and try again. -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt

Re: problem with X

2003-01-29 Thread Eric Anholt
is unresolved! I'm sorry this error was still around. Apparently I had looked at a CVS version of X when trying to figure out why it was happening, and CVS X has it fixed. Until I commit a fix, you can add -fno-merge-constants to your CFLAGS. -- Eric Anholt[EMAIL

Re: problem with X

2003-01-29 Thread Eric Anholt
On Wed, 2003-01-29 at 15:17, Eric Anholt wrote: On Wed, 2003-01-29 at 11:29, Charlie ROOT wrote: On Tue, 28 Jan 2003, joseph wrote: Try a make build world and see if that version of libc_r works. It should fix the problem. joseph I tried that... now the error is: Symbol from

Re: problem with X

2003-01-29 Thread Eric Anholt
the information from it. (The question is whether imake is detecting whether that flag is available in gcc or not). -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/ [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED

Re: font failure in X

2003-01-07 Thread Eric Anholt
such). Adding the following line to my XF86Config's Monitor section fixed it. DisplaySize 310 270 If this is the problem, could you tell me what card you're using? -- Eric Anholt

Re: 5.0-RC2 informal PR: X hangups using radeon driver

2003-01-01 Thread Eric Anholt
card you have and loads the appropriate driver (radeon, r128, atimisc). -- Eric Anholt[EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body

Re: DRM_LINUX, potential draw backs?

2002-11-11 Thread Eric Anholt
the DRI. -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: XFree

2002-11-07 Thread Eric Anholt
On Thu, 2002-11-07 at 04:40, Horen wrote: On 6 Nov 2002, Eric Anholt wrote: On Wed, 2002-11-06 at 18:34, Horen wrote: Posted a week ago the question, didn't get any reaction. Everything with current from last night works fine but killing X or logging out ends in a black

Re: XFree

2002-11-07 Thread Eric Anholt
On Thu, 2002-11-07 at 16:56, Horen wrote: On 7 Nov 2002, Eric Anholt wrote: On Thu, 2002-11-07 at 04:40, Horen wrote: On 6 Nov 2002, Eric Anholt wrote: On Wed, 2002-11-06 at 18:34, Horen wrote: Posted a week ago the question, didn't get any reaction

Re: XFree

2002-11-06 Thread Eric Anholt
too. How long has this been going on? Did it start at any particular point (a specific kernel or XFree86 upgrade)? What video card do you use? Does starting X again not work? -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL

Panic in swapon on 10/24

2002-10-25 Thread Eric Anholt
locked. 2165 * If we are doing a vput, the node is already locked, 2166 * but, in the case of vrele, we must explicitly lock -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED

Re: X problems 5.0... -RELEASE?

2002-10-19 Thread Eric Anholt
On Sun, 2002-10-13 at 23:00, Eric Anholt wrote: On Sun, 2002-10-13 at 21:14, Kris Kennaway wrote: On Sun, Oct 13, 2002 at 11:28:51PM -0400, Wesley Morgan wrote: I know there is some work being done on the recent signal changes to fix some things, but are we sure this is the problem? I

Re: sorry state of Xserver in 5.0

2002-10-19 Thread Eric Anholt
a hardware cursor and smooth mouse on (it's default) you'll still be able to move the mouse because the mouse response is done in a signal handler, so a busy server doesn't make your mouse stop working. Still wishing I could get a working gdb on an X. -- Eric Anholt [EMAIL PROTECTED] http

Re: X problems 5.0... -RELEASE?

2002-10-13 Thread Eric Anholt
this up to kernel bugs. -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: XFree86 crash, Bezier thing (was Re: Is phk rewriting thekernel over the weekend?)

2002-09-29 Thread Eric Anholt
of kernel. I hadn't experienced it, so I ignored it. I don't know about that link posted, I thought that was a mozilla bug that was supposed to be fixed. -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe

Re: groff and X11 broken (before gcc3.2)

2002-09-02 Thread Eric Anholt
some sort of suid Xwrapper installed with XFree86-4-Server, but that would probably be shot down for security concerns by those who don't use startx. -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd

Re: Still no XFree86-4

2002-07-21 Thread Eric Anholt
that'll help figure out build errors (particularly relating to dependencies like this) will be to include an ls -l /var/db/pkg/XFree86* /var/db/pkg/imake* with bug reports -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED

Re: Problem with agpgart on current, XFree86-4, Matrox G400 video

2002-07-17 Thread Eric Anholt
had 'device agp' in my kernel). But, I'm happy enough to have finally tracked down what the issue was. Can you still make it panic after adding agp? -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe

Re: Problem with agpgart on current, XFree86-4, Matrox G400 video

2002-07-17 Thread Eric Anholt
On Wed, 2002-07-17 at 20:59, Peter Wemm wrote: Eric Anholt wrote: This looks like the classic error of the agp module having been loaded by the drm because it's required, but agp doesn't probe/attach because a generic bridge driver has already claimed the agp device. I doubt

Re: Still no XFree86-4?

2002-07-16 Thread Eric Anholt
-current in the body of the message -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: Still no XFree86-4?

2002-07-16 Thread Eric Anholt
On Tue, 2002-07-16 at 17:25, Eric Anholt wrote: As far as the Wraphelp.c issues, I'm working on cleaning that mess up right now (testing the patch on a full XFree86-4 build on clean -current). I've put the patch up at http://people.freebsd.org/~anholt/files/x420diff2-1 It does the following

Re: Still no XFree86-4?

2002-07-16 Thread Eric Anholt
On Tue, 2002-07-16 at 19:38, Garance A Drosihn wrote: At 7:27 PM -0600 7/16/02, Eric Anholt wrote: It notably doesn't include md5summing of Wraphelp.c. If I can find what's the 'best' Wraphelp.c (and most legal? What's the status of wraphelp importing/exporting?), I'll switch

Re: Update to the DRM

2002-07-13 Thread Eric Anholt
On Sat, 2002-07-13 at 11:23, Michael Nottebrock wrote: Eric Anholt wrote: I have just compiled a world with the 20020711.diff. It sure runs fast, but the quality isn't very good. I tested with glxgears and gltron and in both there is a lot of flashing and lighting errors. Do you have

Re: Update to the DRM

2002-07-12 Thread Eric Anholt
process now for most chipsets, but does take some time. -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: Update to the DRM

2002-07-12 Thread Eric Anholt
On Fri, 2002-07-12 at 13:49, Stanislav Grozev wrote: On Fri, Jul 12, 2002 at 01:06:31PM -0600, Eric Anholt wrote: Luckily for you, support for mach64s (Rage Pros specifically, which I think your chip is) is being worked on in DRI CVS, so it should be available soon. What's needed

Re: Update to the DRM

2002-07-11 Thread Eric Anholt
and nothing showed up. any ideas? Missed the N on my cvs diff -uN. New patch is uploaded, including not stripping FreeBSD ID tags. http://people.freebsd.org/~anholt/dri/files/currentdrm-20020711.diff -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail

Re: don't know how to make /usr/X11R6/bin/ucs2any.pl. on v.recen t-CURRENT when trying to build ports/x11/XFree86-4

2002-07-11 Thread Eric Anholt
-bad-extern.patch. === XFree86-libraries-4.2.0_2 depends on executable: imake - not found ===Verifying install for imake in /usr/ports/devel/imake-4 === Extracting for imake-4.2.0_1 Checksum OK for xc/X420src-1.tgz. === imake-4.2.0_1 depends on executable: perl5.6.1 - found -- Eric Anholt

Update to the DRM

2002-07-10 Thread Eric Anholt
I've posted a diff to the DRM at http://people.freebsd.org/~anholt/dri/files/currentdrm-20020709.ta -- Eric Anholt [EMAIL PROTECTED] http://people.freebsd.org/~anholt/dri/ To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: Update to the DRM

2002-07-10 Thread Eric Anholt
On Wed, 2002-07-10 at 17:17, Eric Anholt wrote: I've posted a diff to the DRM at http://people.freebsd.org/~anholt/dri/files/currentdrm-20020709.ta Evolution's send button is way too big. http://people.freebsd.org/~anholt/dri/files/currentdrm-20020709.diff is the file. The patch brings

Re: crash when starting X

2002-05-26 Thread Eric Anholt
/trans_tmp.h:124: Internal compiler error in failed_reload, at reload1.c:5050 Please submit a full bug report, with preprocessed source if appropriate. See URL:http://www.gnu.org/software/gcc/bugs.html for instructions. If someone is interested I can give them more full logs. -- Eric Anholt [EMAIL

Re: DRM in the sys/ tree: looking for testers

2002-04-26 Thread Eric Anholt
On Fri, 2002-04-26 at 01:03, moto kawasaki wrote: Thank you very much, Mr. Eric Anholt, I have been testing your code on my PC, and found that kernel cannot initialize agpgart device so far. The i8x0 DRM drivers require AGP to be working. I took a look at your i830 patch today

DRM in the sys/ tree: looking for testers

2002-04-17 Thread Eric Anholt
The DRM kernel modules (kernel support for 3d hardware acceleration through the DRI) may be integrated into our sys tree soon. I may be getting a commit bit soon to work on this. I think getting the modules in the sys tree will help keep the DRI supported on FreeBSD even if I become less

ppp troubles

2000-08-11 Thread Eric Anholt
ery nasty connection that keeps dropping and making me route delete, ifconfig -a ( repeat), route add again. If there is any other info needed, I would be glad to post. -- -- Eric Anholt [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message

Re: syscons hangs with -current

2000-07-12 Thread Eric Anholt
0 Jul 2000 10:39:44 MST, Eric Anholt wrote: Nope, same old device sc 1. I've tried unmodified GENERIC, and it does the same thing. Why am I special? I believe that the attached commit message describes the fix to the problem. However, I'd recommend going all the way to rev 1.10 or whatever

syscons hangs with -current

2000-07-11 Thread Eric Anholt
help would be greatly appreciated. -- -- Eric Anholt [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message

Re: fcnt, ecvt, gcvt and XFree86 2.9.16f build errors

1999-12-17 Thread Eric Anholt
__FreeBSD__ in config/cf/Imake.cf, it'll detect and get at least farther along. (still having troubles compiling from their cvs, going to submit a report rsn). Hopefully we can find a bit nicer way of doing things soon. -- Eric Anholt [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED