ATAng seems to cause nothing but trouble for me. It won't recognize
HPT370 arrays at all (whereas older 5.1 Kernels work perfectly) and
just goes on complaining it can't mount root from it. Promise RAID is
somewhat better (can mount root from it but goes on telling me one of
the subdisks is down
Hello Janet,
Sunday, October 26, 2003, 1:52:52 PM, you wrote:
Gabriel Ambuehl wrote:
Further, 4.9RC3 also gives me headaches with HPT370 but seems to work ok with
Promise RAID, didn't try SATA or VT8325 so far. I'd definitely vote
for delaying 4.9 until some more people have beaten
Hi John Hay,
you wrote.
JH Return-Path: [EMAIL PROTECTED]
JH Delivered-To: [EMAIL PROTECTED]
JH Received: (qmail 61696 invoked from network); 18 Oct 2003 16:55:08 -
JH Received: from mx2.freebsd.org (216.136.204.119)
JH by 0 with SMTP; 18 Oct 2003 16:55:08 -
JH Received: from
Hi Bruno Van Den Bossche,
you wrote.
BVDB On Thu, 9 Oct 2003 14:36:12 +0200
BVDB Gabriel Ambuehl [EMAIL PROTECTED] wrote:
A machine I had recompiled with a CVSUP as of yesterday (and again
today, to no avail) can't mount root from a HPT370 (/dev/ar0s1a)
RAID 1 array anymore, with the saved
A machine I had recompiled with a CVSUP as of yesterday (and again
today, to no avail) can't mount root from a HPT370 (/dev/ar0s1a)
RAID 1 array anymore, with the saved old kernel (two weeks or so I think)
it boots without any trouble.
Regards,
Gabriel
Hi Steve Ames,
you wrote.
SA G'day.
SA My company is putting together a system with lots of file
SA system on it to do disk based backup.
SA Under 5.1-CURRENT what's the best supported (and performing
SA optimally) SATA RAID controller (RAID 0, maybe 5)? What
SA manufacturer/model of SATA disks
Hi Soren Schmidt,
you wrote.
SS It seems Will Andrews wrote:
On Tue, Sep 30, 2003 at 10:22:33PM +0200, Soren Schmidt wrote:
No what I mean is that the Raptor is a PATA device fitted with a
marvell PATA-SATA converter on board, its not a pure SATA
design, but just the old stuff they used to
Hi Derek Ragona,
you wrote.
DR My troublesome system uses an Adaptec Serial ATA RAID 1210SA which has the
DR SiI3112 RAID chip. I have only one drive connected, so no RAID functionality.
DR Here is my verbose dmesg using the 9/28/03 snapshot:
DR http://www.computinginnovations.com/dmesg.html
The drivers in 28.9.JPSNAP of current will allow you to install
FreeBSD on a SATA disk connected to a Silicon Image 3112 SATA RAID
controller but not much more. Shortly after booting, the system will
start getting UDMA timeouts and basically just freezes. Furthermore,
the disks connected to the
Hello Derek,
Saturday, September 27, 2003, 8:50:21 PM, you wrote:
Gabriel,
I experienced the same problem using 5.1 release with an Adaptec SATA
Raid card that uses the SATA Sil3112A chip.
With 5.1-CURRENT I can get FreeBSD to install, but the server locks-up
because the disk subsystem
Hi Travis Troyer,
you wrote.
TT I just purchased a Sil680 IDE RAID controller, and have setup
TT a striped RAID array. When I boot from the 5.1 installation
TT CD-ROM, FreeBSD does not recognize them as one disk. I
TT checked the hardware notes, and Sil680 UDMA6 is listed.
TT Seeing Sil680
-BEGIN PGP SIGNED MESSAGE-
Hello,
I just installed 5 CURRENT (20.1. snapshot) on a K6-2 500 whic was
previously running 4.4 STABLE without any problems but since CURRENT
is running, it keeps printing error messages about microuptime went
backwards which doesn't seem to hurt the system
-BEGIN PGP SIGNED MESSAGE-
Hello,
I can't seem to be able to build 5-CURRENT since several days. I just
cvsupped again (tracking everything on CURRENT branch) but I always
run
into the following:
sh /usr/src/tools/install.sh -c -o root -g wheel -m 444 libmd.a
-BEGIN PGP SIGNED MESSAGE-
Hello,
I can't seem to be able to build 5-CURRENT since several days. I just
cvsupped again (tracking everything on CURRENT branch) but I always
run
into the following:
sh /usr/src/tools/install.sh -c -o root -g wheel -m 444 libmd.a
-BEGIN PGP SIGNED MESSAGE-
Hello Makoto,
Tuesday, March 27, 2001, 7:55:15 PM, you wrote:
gabriel_ambuehl I can't seem to be able to build 5-CURRENT since
several days.
You should have src/secure/lib/libcrypt/crypt-blowfish.c. If you
don't
have, it's your problem. The CVS repository
15 matches
Mail list logo
