Data corruption issue? (Was: NFS writes over a VLAN trunk wedges system)

2003-09-04 Thread Georg-W. Koltermann
Just trying to make sure Bosko takes note of this. He might have something to say as DISABLE_PSE appears to fix your problem. -- Regards, Georg. On Do, 2003-09-04 at 00:02, Peter Jeremy wrote: I have a system running 5.1-RELEASE-p2 which is an NFS client of another FreeBSD (4.x) machine.

still data corruption with 5.1-R on Intel Pentium 4

2003-07-23 Thread Georg-W. Koltermann
There have been threads about data corruption in RAM on P4 and other i386 machines on this list. I also observed the problem, on my laptop with 5.0-R. It seemed to go away with 5.1-R, on the laptop. Recently I upgraded my home PC which is a P4 2.0A from 4.8-R to 5.1-R. No problems at first.

spontaneous reboot while dump -0uaLf - /var on a UFS2 FS in5.0-RELEASE

2003-02-25 Thread Georg-W. Koltermann
removing the snapshot), and all went well this time. Does this sound like a known problem? -- Regards, Georg. -- Georg-W. Koltermann [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: fxp0 device timeout on 5.0-RELEASE

2003-01-31 Thread Georg-W. Koltermann
Am Do, 2003-01-30 um 12.41 schrieb Sergey A. Osokin: 3) Put hw.pci.allow_unsupported_io_range=1 into your /boot/loader.conf.local Thanks, that did the trick. Could we, maybe, add a little note about this to the release notes or errata? Or better yet, how about a big fat warning message if

5.0-R: no network connectivity with generic kernel andfirewall_enable=YES

2003-01-31 Thread Georg-W. Koltermann
Hi, I couldn't connect to anything on the network with my 5.0-RELEASE, with the generic kernel and rc.conf containing firewall_enable=YES natd_interface=fxp0 natd_interface=fxp0 natd_flags=-t 255.255.255.255 The firewall loaded ok but natd silently vanished. When I tried to

fxp0 device timeout on 5.0-RELEASE

2003-01-30 Thread Georg-W. Koltermann
Hi, on an HP Omnibook 6100 which ran -current about half a year ago successfully, I get fxp0 device timeouts after installing 5.0-R. The network interface does not work at all. arp -an says incomplete for every host that I try to connect. The system now runs 4.7-STABLE with no problems, and as

Re: install crash on hp omnibook 6100

2002-08-21 Thread Georg-W. Koltermann
Am Mi, 2002-08-21 um 21.52 schrieb Andy Sparrow: i'm trying to install current from cd (i took 3 different builds) to my notebook hp omnibook 6100. by booting the kernel after few lines is the machine crashing. i'm not abte to see the reason, everything goes too fast. has anybody

Re: fsck hosed?

2002-07-08 Thread Georg-W. Koltermann
Yes, I see that as well. Another symptom is that fsck -p now always announces unexpected inconsistencies and drops back to singleuser when it indeed was able to fix the problems, i.e. it marks the filesystem clean and a manual fsck does not report anything unusual. My last cvsup was with

Re: dump(8) is hosed

2002-07-05 Thread Georg-W. Koltermann
Am Mi, 2002-07-03 um 17.31 schrieb David O'Brien: On a 27-June-2002 23:02:00 UTC system (just before ipfw2 went in, pre-KSE3), dump will not complete dumping more than 5GB. At that point it stops responding properly to ^T, which should give DUMP: 47.52% done, finished in 1:19. At the 5GB

panic: Most recently used by kqueue

2002-07-04 Thread Georg-W. Koltermann
Hi, I got this panic with -current of date=2002.06.27.22.00.00. It reminds me of another panic that I had recently with a -current of 25-June, the message of that earlier incident was panic: Most recently used by routetbl. hunter[7]$ gdb -k /boot/kernel/kernel vmcore.26 GNU gdb 4.18

ipfw divert not accepted

2002-07-03 Thread Georg-W. Koltermann
hunter# ipfw add 50 divert natd all from any to any via fxp0 ipfw: getsockopt(IP_FW_ADD): Invalid argument hunter# ipfw list 00100 allow ip from any to any via lo0 00200 deny ip from any to 127.0.0.0/8 00300 deny ip from 127.0.0.0/8 to any 65000 allow ip from

Re: ipfw divert not accepted

2002-07-03 Thread Georg-W. Koltermann
: Georg-W. Koltermann wrote: hunter# ipfw add 50 divert natd all from any to any via fxp0 ipfw: getsockopt(IP_FW_ADD): Invalid argument Add option IPFIREWALL_FORWARD into your kernel config. -Maxim To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd

PANIC Most recently used by routetbl

2002-07-01 Thread Georg-W. Koltermann
Hi, panic: Most recently used by routetbl I get this type of panic withing minutes of uptime with a -current of 25-Jun-2002 around 13:52 GMT-2. Another anomaly is that name resolution doesn't seem to work reliably, or maybe even TCP in general has a problem -- it all takes very long if it

panic -- trap in atomic_cmpset_int

2002-06-25 Thread Georg-W. Koltermann
Hi, with a -current CVSupped 17 May 22:27 GMT-2: hunter[4]$ gdb -k kernel.debug vmcore.23 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under

panic -- trap in mtx_lock_sleep

2002-06-14 Thread Georg-W. Koltermann
Hi, I got the following panic while compiling openoffice. I suspect it was somehow triggered by the high I/O activity. Last CVSup was 17 May 22:27 GMT-2. I'll keep the dump around for a couple of days, so let me know if I should provide any additional information. -- Georg. hunter# cat

Panic in softdep_fsync() while running VMWare in background

2002-06-06 Thread Georg-W. Koltermann
Hi, I get this panic sometimes when VMWare is executing in the background (iconified). It can take a while (a couple of hours) until it happens. The panic string says buffer not busy, but that seems to be fallout of a second panic during the panic. The first one seems to be caused by a trap in

Re: reading kernel dump - post gcc 3.1

2002-06-03 Thread Georg-W. Koltermann
Am Mo, 2002-05-27 um 19.52 schrieb David O'Brien: On Mon, May 27, 2002 at 12:23:13PM +0200, Georg-W. Koltermann wrote: Please read bin/38236. I wasn't asking for general directions but for a specific solution to a current -current problem. RTFM specifically the -gstabs+ GCC option

Re: reading kernel dump - post gcc 3.1

2002-05-27 Thread Georg-W. Koltermann
Am Sa, 2002-05-25 um 02.30 schrieb Craig Carey: [...] savecore(8) should copy a dump of the crashed kernel to /var/crash and created files kernel.0 and vmcore.0. gdb -k kernel.0 vmcore.0 hunter[13]$ gdb -k kernel.debug vmcore.19 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free

reading kernel dump - post gcc 3.1

2002-05-24 Thread Georg-W. Koltermann
Hi, I got a couple of kernel panics recently, some of them buffer not locked. I would like to know how I can get more information out of the dump. The system's gdb does not like the dump format any more, see also bin/38236. There is an advertised workaround in that pr of using gdb52, but I

Re: cannot link C++ apps any more (GCC 3.1)

2002-05-22 Thread Georg-W. Koltermann
Am Di, 2002-05-21 um 21.35 schrieb Szilveszter Adam: Hello, On Tue, May 21, 2002 at 02:26:57PM +0200, Georg-W. Koltermann wrote: Hi, I am unable to link C++ apps with a recent -current. It seems I would need a new libstdc++ which was not included. My libstdc++.so is a leftover from

cannot link C++ apps any more (GCC 3.1)

2002-05-21 Thread Georg-W. Koltermann
Hi, I am unable to link C++ apps with a recent -current. It seems I would need a new libstdc++ which was not included. My libstdc++.so is a leftover from the previous cvsup. hunter[205]$ cat gwk.cc #include iostream int main(int argc, const char *argv[]) { cout

Re: Problem with FreeBSD dc driver and Xircom PCMCIA card

2002-04-08 Thread Georg-W. Koltermann
Ah, finally someone else sees what I ran into last year. Look for my posting to -current in May 2001, subject dc0 ARP problem with CISCO. At that time, the only advice I got was to hardwire speed detection (which didn't help). My solution then was to switch hardware :-( So I'm afraid this is

Re: HEADS UP: cvs commit: src/sys/conf kern.pre.mk (fwd)

2002-02-26 Thread Georg-W Koltermann
Hi Warner, a simple cast char *baz = (char*)foo; works for me. -- Regards, Georg. At Mon, 25 Feb 2002 21:59:23 -0700 (MST), M. Warner Losh [EMAIL PROTECTED] wrote: In message: [EMAIL PROTECTED] Peter Wemm [EMAIL PROTECTED] writes: : There are a couple of offending files in

Re: panic: softdep_setup_inomapdep: found inode

2002-02-15 Thread Georg-W Koltermann
Hi, I had another one of these panics. The previous one was with -current of CVSupped in early January, this one is with -current of February 6. The panic seems to be triggered when I do a filesystem copy to an online disk for backup purposes, like this: newfs /dev/ad2s5e

Re: [FIXED] /dev/rtc not configured message when starting VMWare2 on -current

2002-02-13 Thread Georg-W Koltermann
Yes, that seems to fix it, although I had a spontaneous system lockup while I was running with this patch. I have no idea wether the lockup was connected to that patch; I am running that code again right now and it does not lockup. Many thanks to Munehiro and Takanori. Maybe someone else with

/dev/rtc not configured message when starting VMWare2 on -current

2002-02-11 Thread Georg-W Koltermann
Hi, since many weeks I get /dev/rtc: device not configured in -current when I start VMWare2. The VMWare2 port works fine otherwise. Yes, rtc-2001.09.16.1 is installed, and the module is loaded during startup. -- Regards, Georg. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe

Re: Performance of -current vs -stable

2002-02-11 Thread Georg-W Koltermann
At Wed, 06 Feb 2002 23:33:14 -0500 (EST), John Baldwin wrote: [...] I guess. Note that you can use a loader tunable 'debug.witness_watch' to turn witness off from the loader. If it's set to 0 witness won't be used even if it's compiled into the kernel (just a general FYI, witness(4)

/dev/rtc not configured message when starting VMWare2 on -current

2002-02-11 Thread Georg-W Koltermann
Hi, since many weeks I get /dev/rtc: device not configured in -current when I start VMWare2. The VMWare2 port works fine otherwise. Yes, rtc-2001.09.16.1 is installed, and the module is loaded during startup. -- Regards, Georg. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe

PCCARD not working on HP Omnibook 6100

2002-02-11 Thread Georg-W Koltermann
Hi, I can't get my PCMCIA card to work on my HP Omnibook 6100. -current is from Feb 6. During boot I get: Feb 7 10:14:04 hunter kernel: pcic0: TI PCI-1420 PCI-CardBus Bridge irq 5 at device 5.0 on pci2 Feb 7 10:14:04 hunter kernel: pcic0: PCI Memory allocated: 0xd020 Feb 7

/dev/rtc not configured message when starting VMWare2 on -current

2002-02-07 Thread Georg-W Koltermann
Hi, since many weeks I get /dev/rtc: device not configured in -current when I start VMWare2. The VMWare2 port works fine otherwise. Yes, rtc-2001.09.16.1 is installed, and the module is loaded during startup. -- Regards, Georg. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe

/dev/rtc not configured message when starting VMWare2 on -current

2002-02-07 Thread Georg-W Koltermann
Hi, since many weeks I get /dev/rtc: device not configured in -current when I start VMWare2. The VMWare2 port works fine otherwise. Yes, rtc-2001.09.16.1 is installed, and the module is loaded during startup. -- Regards, Georg. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe

PCCARD not working on HP Omnibook 6100

2002-02-07 Thread Georg-W Koltermann
Hi, I can't get my PCMCIA card to work on my HP Omnibook 6100. -current is from Feb 6. During boot I get: Feb 7 10:14:04 hunter kernel: pcic0: TI PCI-1420 PCI-CardBus Bridge irq 5 at device 5.0 on pci2 Feb 7 10:14:04 hunter kernel: pcic0: PCI Memory allocated: 0xd020 Feb 7

Re: Performance of -current vs -stable

2002-02-07 Thread Georg-W Koltermann
At Wed, 06 Feb 2002 23:33:14 -0500 (EST), John Baldwin wrote: [...] I guess. Note that you can use a loader tunable 'debug.witness_watch' to turn witness off from the loader. If it's set to 0 witness won't be used even if it's compiled into the kernel (just a general FYI, witness(4)

panic: softdep_setup_inomapdep: found inode

2002-02-04 Thread Georg-W Koltermann
IdlePTD at phsyical address 0x00487000 initial pcb at physical address 0x003702c0 panicstr: bremfree: bp 0xd3bf08d0 not locked panic messages: --- panic: softdep_setup_inomapdep: found inode syncing disks... panic: bremfree: bp 0xd3bf08d0 not locked Uptime: 1h49m20s pccbb0: pccbb_power:

PANIC when connecting USB device

2002-01-17 Thread Georg-W Koltermann
Hi, I frequently see panics when I connect or disconnect USB devices. It seems this is fallout from application software not handling the device correctly, i.e. it only occurs (IIRC) after some application program had problems with the device, an example being gphoto2 which is currently unable

Re: endless loop with gettimeofday in mozilla

2001-12-17 Thread Georg-W Koltermann
At Fri, 14 Dec 2001 12:40:21 -0800 (PST), Steven G. Kargl [EMAIL PROTECTED] wrote: Switching to a vty and running truss -p mozilla's pid yields the following endless stream. gettimeofday(0x28254b6c,0x0) = 0 (0x0) sigprocmask(0x3,0x28254bfc,0x0) = 0

Re: ACPI causes immediate reboot [Omnibook 6100] ?

2001-12-17 Thread Georg-W Koltermann
Hi, I finally got around to hook up a serial console and capture the error message. This is with ACPI_DEBUG enabled in the kernel config, but ACPI is still loaded as a module, not configured statically. acpi0: PTLTD EBRSDT on motherboard ACPI-0294: *** Error: Method execution

panic: kernel trap doesn't have ucred

2001-12-11 Thread Georg-W Koltermann
Hi, I get a panic kernel trap doesn't have ucred when I try to install Linux ORACLE 8.1.7. The ORACLE installation program is a JAVA application and only seems to work with the included JRE (the IBM 1.1.8 JRE according to the LICENSE file). The JRE is using native Linux threads, and I know I

Re: ACPI causes immediate reboot [Omnibook 6100] ?

2001-12-07 Thread Georg-W Koltermann
Hi, I CVSuped yesterday and still see the problem that was discussed in this thread, i.e. immediate reset during kernel initialization when ACPI is enabled on an HP Omnibook 6100. The error message flies by so quickly that I cannot even read it. Has there been any progress towards a solution?

What happened to current.freebsd.org again?

2001-11-30 Thread Georg-W. Koltermann
Hello, since some time again I can't get to ftp://current.freebsd.org to download current snapshots and packages. Is the machine broken again? -- Regards, Georg. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message

Re: vmware fails on -current

2001-11-19 Thread Georg-W. Koltermann
At Sun, 18 Nov 2001 09:37:12 +0100 (MET), Hellmuth Michaelis wrote: Thought i update my current this morning and ran into two problem with vmware: 1) when starting vmware, vmware.sh aborts with vmware.sh: cannot create /compat/linux/dev/vmnet1: no such device or address Hi

Re: VMWare2 permission problems on -current as of Sep 26 [FIXED]

2001-10-12 Thread Georg-W. Koltermann
Robert, the problem wan't with access(2) but with preceding setresuid(2) calls. There was a false widening conversion taking place in linux_uid16.c. Various setXXid() calls allow the caller to set several ids at once, or leave them unchanged by specifying the magic parameter -1. Unfortunately

Re: VMWare2 permission problems on -current as of Sep 26

2001-10-08 Thread Georg-W. Koltermann
. At Sun, 7 Oct 2001 19:28:35 -0400 (EDT), Robert Watson wrote: On Sun, 7 Oct 2001, Georg-W. Koltermann wrote: [...] I ran the vmware command through ktrace(1) (had to do that as root since it won't trace a SUID program for a normal user), and it does get an error return from an access(2

Re: NIS client performance seems very poor under network load

2001-10-05 Thread Georg-W. Koltermann
You know, I have been using and NSD, at work on IRIX. I had trouble with it, it sometimes wouldn't sync with the nameserver, or would cease to serve any names until I HUPed it. And, seriously, I don't really understand what it's good for. Bind has been responsible for resolving host names as

VMWare2 permission problems on -current as of Sep 26

2001-10-02 Thread Georg-W. Koltermann
Hi, I have applied the KSE patches to vmware2 that were posted on http://www.ripe.net/home/mark/files/vmware2_kse.patch.tgz. I can now build vmware2, but run into a number of permission problems running it: 1. Xlib: connection to :0.0 refused by server Xlib: Client is not authorized to

Re: cardbus nonfunctional in -current as of 9/24

2001-10-01 Thread Georg-W. Koltermann
At Sun, 30 Sep 2001 02:57:27 -0600, Warner Losh wrote: Try disabling acpi and let me know what's what. Warner Still the same without acpi. Last night, undocked: Sep 30 20:22:59 hunter /boot/kernel/kernel: pccbb0: TI1225 PCI-CardBus Bridge at device 4.0 on pci0 Sep 30 20:22:59

ACPI and APM interoperability?

2001-10-01 Thread Georg-W. Koltermann
Hi, I'm wondering how I should handle APM now that ACPI has basically taken over power management responsibility. It seems I still need to configure APM so that /dev/apm is there and battery monitoring utilities like the GNOME battery_applet can work. I also was able to suspend and resume my

Re: ACPI and APM interoperability?

2001-10-01 Thread Georg-W. Koltermann
At Mon, 1 Oct 2001 08:49:10 -0600, Scott Long wrote: On Mon, Oct 01, 2001 at 10:50:17AM +0200, Georg-W. Koltermann wrote: [...] I also was able to suspend and resume my machine (DELL Inspiron 7500) with APM being configured (and ACPI being active by default). Sound is dead after

cardbus nonfunctional in -current as of 9/24

2001-09-28 Thread Georg-W. Koltermann
Hi, the latest current (CVSuped Sep 24) does not like my Cardbus system any more. I have a Dell Inspiron 7500 with a CBEM56G cardbus Ethernet/Modem combo card and an older 16 bit modem card (which hasn't been recognized by cardbus since a while). Last night, when I booted the new -current

amd not loading nfsclient.ko in -current of 9/26

2001-09-28 Thread Georg-W. Koltermann
Hi, after upgrading my current a few days ago I find that amd does not work any more: Sep 28 09:47:19 hunter amd[309]: /net: mount: No such file or directory Sep 28 09:47:19 hunter amd[309]: extra mkdirs required for /net Sep 28 09:47:19 hunter amd[309]: amfs_toplvl_mount:

Re: Dell laptop cardbus problem

2001-09-15 Thread Georg-W. Koltermann
At Sat, 15 Sep 2001 14:43:38 -0500, Vladimir V. Egorin [EMAIL PROTECTED] wrote: I have a Dell Latitude CPx with a Xircom RealPort CardBus Ethernet 10/100+Modem 56 card. The card used to work on an Aug 1, 2001 -CURRENT. I've cvsup'ed and built the system yesterday (sep 15) and cannot

Re: linux netscape hangs in -current

2001-09-06 Thread Georg-W. Koltermann
At Wed, 5 Sep 2001 15:50:31 -0700, Steve Kargl wrote: Linux netscape appears to be having problems with the kernel's linux compatibility module. troutmask:kargl[202] uname -a FreeBSD troutmask.apl.washington.edu 5.0-CURRENT FreeBSD 5.0-CURRENT\ #0: Fri Jul 27 16:04:55 PDT 2001 World

cannot print to remote printer

2001-06-22 Thread Georg-W. Koltermann
Hi, with current as of June 20 I can no longer print to a remote printer. Syslog says filter 'f' exited (retcode=108). I added a set -x to the filter which is a shell program, and sure enough the last action it does is an exit 0. So the problem must be somewhere in lpd. -- Regards, Georg.

Re: Linux JDK 1.3 and hotspot (native threads)

2001-06-09 Thread Georg-W. Koltermann
At Mon, 30 Apr 2001 11:59:38 +0200, Georg-W. Koltermann [EMAIL PROTECTED] wrote: On Fri, Apr 27, 2001 at 09:32:58PM -0400, Andrew Gallatin wrote: Georg-W. Koltermann writes: ... In order to get real performance I would like to run either the SUN JDK with -hotspot, or the IBM

Re: lockup after resume

2001-05-04 Thread Georg-W. Koltermann
On Mon, Apr 09, 2001 at 11:10:54AM +0200, Dag-Erling Smorgrav wrote: Georg-W. Koltermann [EMAIL PROTECTED] writes: I am experiencing a strange lockup with -current as of about a week ago: It will suspend and resume, but after the resume the console is dead and the system hangs after

Re: Linux JDK 1.3 and hotspot (native threads)

2001-04-30 Thread Georg-W. Koltermann
On Fri, Apr 27, 2001 at 09:32:58PM -0400, Andrew Gallatin wrote: Georg-W. Koltermann writes: ... In order to get real performance I would like to run either the SUN JDK with -hotspot, or the IBM 1.3 JVM. Both of these use native linux threads. With a recent -current I can

Re: lockup after resume

2001-04-26 Thread Georg-W. Koltermann
On Thu, Mar 29, 2001 at 07:19:20PM +1000, Bruce Evans wrote: On Wed, 28 Mar 2001, Georg-W. Koltermann wrote: I am experiencing a strange lockup with -current as of about a week ago: It will suspend and resume, but after the resume the console is dead and the system hangs after a short

Linux JDK 1.3 and hotspot (native threads)

2001-04-26 Thread Georg-W. Koltermann
I remember some reports of success running Linux JAVA with native threads on -current. I've tried several times myself, and can't get it to work. The Linux JDK 1.3 (SUN's version) runs fine on -current as well as 4.x as long as I use the classic VM. This version doesn't use native Linux