Thank You, Andriy!
It solved the problem for me too.
Also this can be applied without reboot via command:
sysctl hw.usb.no_cs_fail=1
вс, 28 февр. 2021 г. в 14:21, Andriy Gapon :
> On 28/02/2021 11:03, KOT MATPOCKuH wrote:
> > Hello!
> >
> > I'm using FreeBSD 12.2-STABL
Hello!
I'm using FreeBSD 12.2-STABLE r368656 and got usb-to-rs232 with this
controller.
I see /dev/cuaU0 after plugging in adapter, I can attach to serial line
using cu, but after sending any symbol to device I have device reconnection:
uchcom0 on uhub0
uchcom0: on usbus0
uchcom0: CH340 detected
open or create pidfile: Operation not permitted
DHCPDISCOVER on epair71b.71 to 255.255.255.255 port 67 interval 6
2017-11-16 16:07 GMT+03:00 Kristof Provost <kris...@sigsegv.be>:
> On 16 Nov 2017, at 14:04, KOT MATPOCKuH wrote:
>
> Hello, all!
>
> I'm got same problem...
>
>
Hello, all!
I'm got same problem...
Did someone open an PR for this issue?
2017-10-11 22:48 GMT+03:00 Goran Mekić :
> On Tue, Oct 10, 2017 at 09:10:37PM +, Oleg Ginzburg wrote:
> > I think I found something, but I do not understand why this is only
> > observed in jail
Hi all!
Is possible to use radeonkms on Radeon HD 6290 card?
I tried to boot kernel with loaded radeonkms module, but amd64 and i386
kernels hangs while booting after messages like this:
drmn0: Wrestler [Radeon HD 6290] on vgapci0
info: [drm] MSI enabled 1 message(s)
[drm] RADEON_IS_PCIE
[drm]
Hello!
2011/12/6 Peter Maloney peter.malo...@brockmann-consult.de:
Invalid format sounds like the software doesn't understand the disks.
Check your pool (software) version with:
# zpool upgrade -v
zpool upgrade -v does not show pools, available for upgrade :)
# zpool upgrade
This system is
2011/12/6 Peter Maloney peter.malo...@brockmann-consult.de:
Invalid format sounds like the software doesn't understand the disks.
Check your pool (software) version with:
# zpool upgrade -v
zpool upgrade -v does not show pools, available for upgrade :)
# zpool upgrade
This system is
Hello all!
On 24 nov I updated sources via csup to RELENG_9 (9.0-PRERELEASE).
After make installboot I successfully booted to single user.
But after make installworld system was fail to boot with message:
ZFS: i/o error all block copies unavailable
Invalid format
status command shows status of
2011/7/11 KOT MATPOCKuH matpoc...@gmail.com:
Oops, sorry, I forgot to revert the previous patch when test-compiling.
Please re-fetch sparc64_isc_atomic.h.diff2 and try again.
I started named from ports (dns/bind96) at Sat Jul 9 10:08:41 MSD,
and it worked properly till Sun Jul 10 22:25:41 MSD
2011/7/8 Marius Strobl mar...@alchemy.franken.de:
In order to have a result which can be compared with the base BIND.
Whether bind98 works or works without the ISC atomic operations says
nothing about the bind96 port or the base version.
Okey...
Oops, sorry, I forgot to revert the previous
2011/7/7 Marius Strobl mar...@alchemy.franken.de:
That's not the patch I was referring to. I did a second one which just
entirely disables the use of atomic operations on sparc64:
http://people.freebsd.org/~marius/sparc64_isc_disable_atomic.diff
Omg. I'm sorry.
I applied this patch and
2011/7/8 Marius Strobl mar...@alchemy.franken.de:
Please try the following:
a) Instead of the base BIND use the dns/bind96 port. The native build
of the latter defaults to not using the ISC atomic implementation
on sparc64 (and arm) and should properly enable the alternative. I
can at
I updated system to r223824 and got named patched to 9.6.-ESV-R4-P3,
but problem is still exists:
07-Jul-2011 13:24:22.765 general:
/usr/src/lib/bind/dns/../../../contrib/bind9/lib/dns/rbtdb.c:1622:
REQUIRE(prev 0) failed
07-Jul-2011 13:24:22.781 general: exiting (due to assertion failure)
How
2011/7/7 Marius Strobl mar...@alchemy.franken.de:
On Thu, Jul 07, 2011 at 01:46:23PM +0400, KOT MATPOCKuH wrote:
I updated system to r223824 and got named patched to 9.6.-ESV-R4-P3,
but problem is still exists:
07-Jul-2011 13:24:22.765 general:
/usr/src/lib/bind/dns/../../../contrib/bind9/lib
2011/6/28 Marius Strobl mar...@alchemy.franken.de:
I'm got a problem with named on FreeBSD-CURRENT/sparc64.
Up to 5 times a day it crashes with these messages:
27-Jun-2011 03:42:14.384 general:
/usr/src/lib/bind/dns/../../../contrib/bind9/lib/dns/rbtdb.c:1614:
REQUIRE(prev 0) failed
2011/6/29 KOT MATPOCKuH matpoc...@gmail.com:
I'm got a problem with named on FreeBSD-CURRENT/sparc64.
Up to 5 times a day it crashes with these messages:
27-Jun-2011 03:42:14.384 general:
/usr/src/lib/bind/dns/../../../contrib/bind9/lib/dns/rbtdb.c:1614:
REQUIRE(prev 0) failed
27-Jun-2011
Hello!
I'm got a problem with named on FreeBSD-CURRENT/sparc64.
Up to 5 times a day it crashes with these messages:
27-Jun-2011 03:42:14.384 general:
/usr/src/lib/bind/dns/../../../contrib/bind9/lib/dns/rbtdb.c:1614:
REQUIRE(prev 0) failed
27-Jun-2011 03:42:14.385 general: exiting (due to
Hi all!
I got another problem with latest kernel: net/isc-dhcp31-server not
started on VLAN interface with message:
Internet Systems Consortium DHCP Server 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Hello!
I fixed it with attached patch.
Omg... Why You are using strcmp, but not strncmp(fs, zfs, strlen(zfs))?
--
MATPOCKuH
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any
On my sparc64 system with today kernel I also got this problem.
With old kernel system boots properly.
boot -sv log attached.
--
MATPOCKuH
boot-sv.log
Description: Binary data
___
freebsd-current@freebsd.org mailing list
On 19.10.2010 03:50, Xin LI wrote:
Escaping to boot loader prompt, and load old kernel, old opensolaris.ko,
old zfs.ko doesn't work.
I think you forgot to load zpool.cache:
load -t /boot/zfs/zpool.cache /boot/zfs/zpool.cache
___
On fresh freebsd-current automatic swap configuration on zvol with
org.freebsd:swap=on by /etc/rc.d/zvol doesn't work because
zfs list -H -o org.freebsd:swap,name -t volume
fails with bus error.
To repeat a problem try:
# zfs create -V 128m rpool/test
# zfs list rpool/test
NAME USED AVAIL REFER
2010/3/1 Scot Hetzel swhet...@gmail.com:
I'm trying to build OOo 3.2.0 on my notebook with 2Gb of memory and 4Gb swap
size.
and build fails with messages:
*Out of memory during request for 788 bytes, total sbrk() is 96739328 bytes!
Why I have out of memory error and how can I fix this
Hello!
I'm trying to build OOo 3.2.0 on my notebook with 2Gb of memory and 4Gb swap
size.
from dmesg.boot:
real memory = 2147483648 (2048 MB)
avail memory = 2089287680 (1992 MB)
swapinfo:
Device 1K-blocks UsedAvail Capacity
/dev/gpt/swap 41943040 4194304 0%
2010/2/24 Bernhard Froehlich de...@bluelife.at
00:00:15.481 !!Assertion Failed!!
00:00:15.481 Expression: paPages[i].Phys != 0 paPages[i].Phys !=
NIL_RTHCPHYS !(paPages[i].Phys PAGE_OFFSET_MASK)
00:00:15.481 Location :
25 matches
Mail list logo