updating stable-5.1 fails buildkernel

Updating from RELENG_4 to RELENG_5_1 fails on buildkernel because C-language specification iso9899:1999 is not understood by stable. Edited transcript attached. Cheers, Kent ___ [EMAIL PROTECTED] mailing list

scsi controller causes sysinstall to freeze machine

Hi all, I have started running down why my machine won't boot off of a current CD when my new SCSI controller is installed. When my scsi controller is installed (with or without the SCSI-bus connected to the controller), `sysinstall' hangs at the deviceTry call at line 403 of `devices.c'. A

scsi tape problem

Hi, I did a make release on a CURRENT (Jul 15) system and find I can't boot from the CD if my adaptec 29160 SCSI controller my Sony SDT-11000 4mm DAT are installed. The kernel probe successfully finds the devices, but the booting hangs with probing for system devices (this may take a while)

ipsec pkts dropped: unknown/unsupported protocol

Hi all, When I brought my -current box forward from a May build, my VPN stopped working. From tcpdump netstat -s I see the pkts come go correctly, but are dropped because: netstat -s: ip: xx packets for unknown/unsupported protocol. I have net.inet.ip.check_interface=0 which was sufficient

IPSEC checkinterface

Hi, I just rebuilt my several month old -current system found that IPSEC processing appears broken. I restored my IPSEC functionality by setting `ip_checkinterface = 0' in "netinet/ip_input.c". However, something tells me that this is not the long-term fix. Thanks. Kent To Unsubscribe:

Re: HEADSUP! change to atapi-cd driver and burncd

Hi all, I've been getting errors with "burncd" that I've not seen before. Specifically, I'm seeing the following: chapel-hill# burncd -f /dev/acd1c -s 4 blank data *1.iso fixate blanking CD - 100 % done burncd: ioctl(CDRIOCNEXTWRITEABLEADDR): Device busy chapel-hill# Trace messages from

SBLive (value)

Hi All, I've again been trying to get my sound support working. The problem I have is the machine panic's (RAM parity error) whenever I (for instance) play an mp3. I have a SBLive Value card. The card works fine under W98. The EMU10K1 is recognized during the probe, but the "sbc" is not. I

FIXIT problems with /dev

Hi All, I just did something foolhardy -- and yet instructive. Pls let me relate. As I had polluted my system with an unstable recent CURRENT, I decided to rebuild from a more stable CURRENT. I (eventually) choose "cvs co -D 2000.06.21.04.00". Works great. Given the difficulty in finding

building stable from current

Hi, For the last while (several months), whenever I try to build a RELENG_4 release from my -current box, it fails building gcc. As -current is supposed to be "fluid" for the next several months, I wanted to make a set of -current and -stable CDs now. The current build was fine. To build

/dev/lkm

To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message

Re: make release problem

In trying to build "make release" today, I discovered that the "vn" driver is required now to build the boot floppies. You make it sound like a new thing - the release process has required the vn device for years. Jordan, Thanks for your time. I guess I need to rephrase my comment I've done

make release problem

In trying to build "make release" today, I discovered that the "vn" driver is required now to build the boot floppies. I would suggest that this driver be added to "GENERIC". For what it's worth, I added the driver to my kernel, rebooted, and completed the make release. Thanks all. Kent To

buildworld error: now it's ngctl

After cvsup'ing this afternoon, mtree compiles. But ngctl fails: === usr.sbin/ngctl cc -O -pipe -Wall -c /usr/src/usr.sbin/ngctl/types.c /usr/src/usr.sbin/ngctl/types.c: In function `TypesCmd': /usr/src/usr.sbin/ngctl/types.c:86: structure has no member named `type_name' *** Error code 1

Re: make release problem

Curious. I've done several (say a dozen) make release builds in the last 4 months of 4.0-CURRENT 5.0-CURRENT. The previous one was about 2 weeks ago. I've never had "vn" in my kernel, nor had a problem. Maybe something in the latest "loadable kernel modules" synchronization/version control

psm with SBLive == processor reset

Hi all, I (and a couple of other people as I recall) reported this some time back. My current kernel as of 5/1/00 still *resets* (not panics, does not pass go, does not collect $200) whenever I access a sound device. This goes for "realaudio plugin" from the linux netscape, mp3blaster, and a

pcm with SBLive - processor reset

(Sorry all, I of course mistyped psm for pcm in the last message -- (I repeat for those with filtering software...) Hi all, I (and a couple of other people as I recall) reported this some time back. My current kernel as of 5/1/00 still *resets* (not panics, does not pass go, does not collect

sound output causes reset

Hi again, I'm still having trouble getting sound out of my SBLive card. I'm running -CURRENT as of 4/28. My box performs a "reset" (not a panic) whenever I try to play a mp3 file or a real-audio clip. The box makes no noise (but at least doesn't reset) when I try "cdcontrol play" I've tried

Kernel builds fail

I can't build a kernel after CVSUP'ing today. After successfully completing a `make world', I tried to build a kernel. Edited script below. chapel-hill# cd /sys/i386/conf chapel-hill# rm -rf ../../compile/GENERIC chapel-hill# config GENERIC WARNING: Old ISA driver compatability shims present.

current status of pcm ??

Hi all, I've been unable to get audio (mp3 cdplay) to work on my desktop with a SBLive card or on my laptop (TP 600E). I would *really* like to have IPSec and a working audio cd player on my laptop. I this supposed to work, or am I swimming upstream. Thanks all. Kent To Unsubscribe: send

make release causes reset

Hi all, I'm trying to build a "stable" release CD for my laptop on my "current" desktop. The "chroot" make world completes, but when the "dorelease" runs, the machine resets. There was no panic message nor entry in /var/log/messages. I've done this a few times, and it always dies in the same

Re: SBlive driver

Doug, On my -CURRENT system (from last week), I also found that the SBlive driver caused spontaneous reset -- no panic, no dump, just reset. I was using "realaudio7" as my audio source. Kent To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the

pcm SoundBlaster Live! PCI card

Hi all, I can't for the life of me get my new gateway computer to make any noise (at least with FreeBSD). I've tried all the PNP/nonPNP combinations from LINT (and then some). The card is a "Creative Labs Soundblaster Live!" PCI card. The gateway blurb is found on:

no audio with newpcm driver on TP600E

Hi, I'm having problems with the newpcm driver. Basically, I can't get audio from the speakers. This while trying to play a cd. The output of mixer looks reasonable. Hardware is a ThinkPad 600E. "audio" portions of the config attached along with the output of dmesg. Help would be greatly

IPSec ppp

Hi, I've configured my laptop to use IPSec to set up a link back to my office network. Every encapsulated packet generates an error message "cksum: out of data". The link works fine otherwise. I'm using AH+ESP over a normal PPP dialup link to my ISP. Normal internet packets do not generate

make rerelease

Hi, Today I did a "make rerelease" in "/usr/src/release" and the kernels were rebuilt, but the binaries weren't. I think the following patch to "release/Makefile" fixes the problem. Basically, this patch does a "make world" for target "release" for target "rerelease" if "/tmp/.world_done"

3C589C interrupt problem

Hi, I just moved my laptop (Thinkpad 600E) from 3.2-5.0-CURRENT. Everything is great *except* the ethernet link is not working correctly. If I set the interrupt to `?' (as in pccard.conf.sample) or 10 (as worked under 3.2) the probe fails "no int?!". If I set it to 11, then the probe works,

build failure w/ current

make world fails: cvsup from 3/15/00 14:00 GMT or so. === sys/boot/i386/libi386 cc -O -pipe -I/usr/src/sys/boot/i386/libi386/../../common -I/usr/src/sys/boot/i386/libi386/../btx/lib -I/usr/src/sys/boot/i386/libi386/../../.. -I. -DCOMPORT=0x3f8 -DCOMSPEED=9600 -DTERM_EMU

PCI modems

Hi all, I've tried hard to get my PCI internal modem work with current. I've tried editing /sys/isa/sio.c with the all possible byte and word swaps of the vendor/dev printouts from the kernel probe. The documentation for this USR modem says it's *not* a winmodem, but a "standalone" modem. The

IPSec/VPN Config

Hi all, Is there a howto/example guide for configuring IPSec for -current. Needless to say I've spent fruitless hours trying to convince "setkey" to sent an IPSec packet to my network's internet gateway w/o success. My setup is typical: mobile/dynamic-assigned-ip-address freebsd box trying to