Re: A dumb question.

1999-09-01 Thread Nathan Ahlstrom

"Arthur H. Johnson II" [EMAIL PROTECTED] wrote:
 When I try to compile the kernel, I get this error at the end:
 
 ../../pci/if_xl.c
 ../../pci/if_xl.c:133: miibus_if.h: No such file or directory
 *** Error code 1
 
 Stop in /usr/src/sys/compile/ARTHUR.
 You must first build a kernel first.
 *** Error code 1
 
 Stop in /usr/src/sys/compile/ARTHUR.
 
 
 What happened to this file?

You may have to add:

controller miibus0 

to you kernel config file.  See LINT for details.

-- 
Nathan AhlstromFreeBSD: http://www.FreeBSD.org/
[EMAIL PROTECTED] PGP Key ID: 0x67BC9D19


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message



Re: Spontaneous reboots

1999-03-25 Thread Nathan Ahlstrom
,
 intel_piix_status:  fast PIO disabled
 ide_pci: busmaster 0 status: 04 from port: f002
 intel_piix_status: secondary master/slave sample = 3, master/slave recovery = 
 1
 intel_piix_status: secondary master fastDMAonly disabled, pre/post enabled,
 intel_piix_status:  IORDY sampling enabled,
 intel_piix_status:  fast PIO enabled
 intel_piix_status: secondary master/slave sample = 3, master/slave recovery = 
 1
 intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
 intel_piix_status:  IORDY sampling disabled,
 intel_piix_status:  fast PIO disabled
 ide_pci: busmaster 1 status: 04 from port: f00a
 found-   vendor=0x5333, dev=0x8811, revid=0x54
   class=03-00-00, hdrtype=0x00, mfdev=0
   subordinatebus=0secondarybus=0
   intpin=a, irq=11
   map[0]: type 1, range 32, base e000, size 26
 vga0: S3 Trio graphics accelerator rev 0x54 int a irq 11 on pci0.10.0
 Probing for devices on the ISA bus:
 atkbd: the current kbd controller command byte 0047
 atkbd: keyboard ID 0x41ab (2)
 kbdc: RESET_KBD return code:00fa
 kbdc: RESET_KBD status:00aa
 sc0 on isa
 sc0: fb0 kbd0
 sc0: VGA color 8 virtual consoles, flags=0x0
 atkbdc0 at 0x60-0x6f on motherboard
 atkbd0 irq 1 on isa
 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d
 sio0: irq maps: 0x1 0x11 0x1 0x1
 sio0 at 0x3f8-0x3ff irq 4 on isa
 sio0: type 16550A
 sio2: irq maps: 0x1 0x9 0x1 0x1
 sio2 at 0x3e8-0x3ef irq 3 on isa
 sio2: type 16550A
 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
 fd0: 1.44MB 3.5in
 wdc0 at 0x1f0-0x1f7 irq 14 on isa
 wdc0: unit 0 (wd0): QUANTUM FIREBALL_TM1700A, LBA, 32-bit, multi-block-16
 wd0: 1628MB (3335472 sectors), 827 cyls, 64 heads, 63 S/T, 512 B/S
 wd0: ATA INQUIRE valid = 0003, dmamword = 0407, apio = 0003, udma = 
 wdc1 at 0x170-0x177 irq 15 on isa
 wdc1: unit 0 (wd2): QUANTUM FIREBALL EL5.1A, LBA, 32-bit, multi-block-16
 wd2: 4892MB (10018890 sectors), 623 cyls, 255 heads, 63 S/T, 512 B/S
 wd2: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007
 wdc1: unit 1 (atapi): SCR-831/38C11S10, removable, dma, iordy
 acd0: drive speed 1375KB/sec, 86KB cache
 acd0: supported read types: CD-DA
 acd0: Audio: play, 255 volume levels
 acd0: Mechanism: ejectable tray
 acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
 npx0 flags 0x1 on motherboard
 npx0: INT 16 interface
 vga0 at 0x3b0-0x3df maddr 0xa msize 131072 on isa
 fb0: vga0, vga, type:VGA (5), flags:0x7007f
 fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa 0x2
 fb0: init mode:24, bios mode:3, current mode:24
 fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k
 VGA parameters upon power-up
 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
 VGA parameters in BIOS for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
 EGA/VGA parameters to be used for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
 imasks: bio c008c040, tty c003001a, net c006
 BIOS Geometries:
  0:03393f3f 0..825=826 cylinders, 0..63=64 heads, 1..63=63 sectors
  1:026dfe3f 0..621=622 cylinders, 0..254=255 heads, 1..63=63 sectors
  0 accounted for
 Device configuration finished.
 IP packet filtering initialized, divert disabled, rule-based forwarding 
 disabled, logging limited to 5000 packets/entry
 bpf: tun0 attached
 bpf: lo0 attached
 Considering FFS root f/s.
 changing root device to wd0s2a
 wd0s1: type 0x6, start 63, end = 2088575, size 2088513 : OK
 wd0s2: type 0xa5, start 2088576, end = 2153087, size 64512 : OK
 wd0s3: type 0xa5, start 2153088, end = 3334463, size 1181376 : OK
 wd2s1: type 0xa5, start 63, end = 289169, size 289107 : OK
 wd2s2: type 0xa5, start 289170, end = 6554519, size 6265350 : OK
 wd2s3: type 0xa5, start 6554520, end = 9687194, size 3132675 : OK
 wd2s4: type 0xa5, start 9687195, end = 10008494, size 321300 : OK
 ffs_mountfs: superblock updated for soft updates
 ffs_mountfs: superblock updated for soft updates
 ffs_mountfs: superblock updated for soft updates
 ffs_mountfs: superblock updated for soft updates
 splash: image decoder found: green_saver
 
 -- 
 Ben Smithurst
 b...@scientia.demon.co.uk
 
 send a blank message to ben+...@scientia.demon.co.uk for PGP key
 
 
 To Unsubscribe: send mail to majord...@freebsd.org
 with unsubscribe freebsd-current in the body of the message

-- 

Nathan Ahlstrom
nrahl...@winternet.com
http://www.FreeBSD.org/


To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message