The subject says it all. Sorry, no DMESG output, as it has not yet been
installed. My relavent hardware is:
Pentium 4 - 3.06GHz w/800MHz FSB Hyperthreading
512MB Rambus
Dell Dimension 8250
Tom Veldhouse
___
[EMAIL PROTECTED] mailing list
Actually, the memory is 512MB PC1066 RDRAM (Rambus). The FSB is 533MHz.
Tom Veldhouse
The subject says it all. Sorry, no DMESG output, as it has not yet been
installed. My relavent hardware is:
Pentium 4 - 3.06GHz w/800MHz FSB Hyperthreading
512MB Rambus
Dell Dimension 8250
Tom
Will 5.2-RELEASE mark the beginning of the new STABLE branch? If not, do we
know approximately when this branch is planned?
Thanks in advance,
Tom Veldhouse
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
I have had the problem listed in the article below for years (4.x and 5.x).
I have been unable to use my Lexmark Optra 312 (USB) with FreeBSD (w/cups)
because there is so often a page of trash printed before a print job
begins. This ONLY happens on FreeBSD and not on Linux 2.4 (w/cups). I have
Stefan Eßer wrote:
Have you tried using /dev/unlpt0 instead of /dev/ulpt0 ?
See man 4 ulpt ...
Regards, STefan
Yes, the problem occurs with both. One just takes longer to start the
printjob than the other, but both will spew out a bad page prior to the
first page of the job. It is not
/usr/src/bin/csh/Makefile, line 3: warning: cd
/usr/src/bin/csh/../../contrib/tcsh/nls/ukrainian; echo set[0-9]* returned
non-zero status
install -s -o root -g wheel -m 555 csh /bin
install -o root -g wheel -m 444
/usr/src/bin/csh/../../contrib/tcsh/complete.tcsh
cc -elf -ffreestanding -Os -fno-builtin -fno-guess-branch-probability -fomi
t-frame-pointer -mno-align-long-strings -mrtd -DUFS1_AND_UFS2 -I/usr/src/
sys/boot/i386/boot2/../../common -I/usr/src/sys/boot/i386/boot2/../btx/lib
-I. -Wall -Waggregate-return -Wbad-function-cast -Wcast-align
Actually, a 2.4 could have HT.
Intel extends Hyper-Threading Technology? to a variety of desktop PCs, with
the new Intel® Pentium® 4 processor, featuring an advanced 800 MHz system
bus and speeds ranging from 2.40C to 3.20 GHz. Hyper-Threading Technology
from Intel enables the processor to
From: Allan Bowhill [EMAIL PROTECTED]
When you upgraded to -current, did you read /usr/src/UPDATING?
You might find the following entry interesting:
20020831:
gcc has been upgraded to 3.2. It is not all binary compatible
with earlier versions of gcc for c++
I posted this in April and received no response. However, this has been an
ongoing issue since at least 2001 (where I found the first reference to this
trouble via Google).
The problem seems to be that the FreeBSD USB LPT driver (even with no-reset)
is somehow dropping the first bits of the data
[EMAIL PROTECTED]
To: Thomas T. Veldhouse [EMAIL PROTECTED]; Emil A Eklund
[EMAIL PROTECTED]
Cc: FreeBSD-Current [EMAIL PROTECTED]
Sent: Sunday, June 08, 2003 1:01 PM
Subject: Re: Sound Blaster Live DD5.1
[ Thomas and Emil talk about Dell OEM SB, Emil gives a pciconf ]
Could somebody with Dell
I have recently purchased a Dell Dimension 8250 which contains a Creative
Labs SoundBlaster Live! DD 5.1 card. My previous SoundBlaster Live! card
was detected in FreeBSD 4.7, but this one is not detected in this machine
using FreeBSD 5.1 RELEASE (cvsup to it). No pcm devices show during boot.
I have been watching this list and I have not seen much talk about the
stability of FreeBSD 5.0 (RELENG_5_0) or of its use as a server? I did see
that some people have upgraded their 4.7 servers to 5.0. Can anybody relate
their experience with the OS release? I am looking for cases in
No, probably not. The original user to start X was probably root and then
the file was created. If another user then tries to start X (assuming they
are allowed), then they may not be able to append to that log file because
it will have permissions and ownership set for root.
Also, startx does
Not if you are trying to log to that file from an X server started under a
regular user. You could put the user you want into the wheel group and then
add permissions for write at the group level. Or just a+w.
Tom Veldhouse
- Original Message -
From: Charlie ROOT [EMAIL PROTECTED]
To:
. Veldhouse [EMAIL PROTECTED]
Cc: FreeBSD-Current [EMAIL PROTECTED]
Sent: Tuesday, January 21, 2003 12:01 AM
Subject: Re: Error Mounting /dev/acd0 on /dist: during sysinstall of
5.0-RELEASE
On Mon, 20 Jan 2003, Thomas T. Veldhouse wrote:
I get an error when trying to install FreeBSD 5.0 RELEASE
I get an error when trying to install FreeBSD 5.0 RELEASE.
Error Mounting /dev/acd0 on dist: Operation not supported by device (19)
This occurs after the filesystems have been created and it is about to mount
the CD to finish the installation. I am able to install via FTP without
trouble. And
I have been unable to install FreeBSD 5.0rc[1,2,3] from CD. After I have
selected all my options, it will format the disk and then complain that it
can not mount my IDE DVD drive (it is new, it could not mount my old one
either -- or my CD drive on acd1c). However, I am able to install with a
It runs fine for me off of a fresh RC2 install. I run KDE 3.0.5 on top of
it.
Tom Veldhouse
- Original Message -
From: Peter Kostouros [EMAIL PROTECTED]
To: walt [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, December 30, 2002 3:20 PM
Subject: Re: Trouble building X on fresh
Well since copyright was abandoned (being placed into the public domain is
abandonment of copyright), the changed file can be copyrighted by whomever
makes changes. The new file is then covered by the license from that point
forward.
Copyright is certainly not abaondoned when you place
Your ethernet card went into promiscuous mode presumably. Did you run
tcpdump?
Tom Veldhouse
[EMAIL PROTECTED]
- Original Message -
From: "Ronan Lucio" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 12, 2001 3:25 PM
Subject: promiscuous mode
Hi all,
Does anybody knows
This has been happening for sometime. It seems to happen when you upgrade a
recent 5.0-SNAPSHOT (not a 4-STABLE install).
I believe that David O'Brien is aware of this. He was working on it - I
wonder if it slipped away :)
Tom Veldhouse
[EMAIL PROTECTED]
- Original Message -
From:
Have a look at what you can do with netgraph first.
Most people don't know what it is but it allows almost arbitrarily
complicated network topologies to be set up from the command line.
Is there any reasonable documentation or a HOWTO on the usage of netgraph?
I am currently using the
I just installed the FreeBSD 5.0-20010107-CURRENT snapshot and have cvsup'd
to the latest source (as of subject). Buildworld fails as below:
--
stage 4: populating /usr/obj/usr/src/i386/usr/include
in /usr/src.
*** Error code 1
Stop in /usr/src.
Tom Veldhouse
[EMAIL PROTECTED]
- Original Message -
From: "David O'Brien" [EMAIL PROTECTED]
To: "Thomas T. Veldhouse" [EMAIL PROTECTED]
Cc: "FreeBSD-Current, " [EMAIL PROTECTED]
Sent: Monday, January 15, 2001 11
that the patch didn't apply well. I looked at it manually and
could not find anything wrong with it.
Tom Veldhouse
[EMAIL PROTECTED]
- Original Message -
From: "David O'Brien" [EMAIL PROTECTED]
To: "Thomas T. Veldhouse" [EMAIL PROTECTED]
Cc: "FreeBSD-Current,
And releng4.freebsd.org is totally missing from the Internet. I suppose
they are having another hardware problem again? Seems FreeBSD is a bit tough
on hardware these days.
Tom Veldhouse
[EMAIL PROTECTED]
- Original Message -
From: "Bill Woods mail" [EMAIL PROTECTED]
To: [EMAIL
I am using the 4.63 dnetc native FreeBSD version of the distributed.net
client. Here is what happens:
---
Local package initialization: dnetc
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xe0aedffc
fault code = supervisor read, page not present
instruction pointer =
On Sun, 23 Jul 2000, Daniel Baker wrote:
Thomas,
Just use "boot -s" to boot into single user mode so that you can disable
the dnetc.sh script before you get into multiuser mode when all the rc.d
scripts are executed.
How long has the machine that you're using been alive for? Has it
Hello. I was wondering if there is any work on a Journaling filesystem to
possible replace, or as an alternative to UFS. I have been following
ReiserFS for Linux quite closely, and I have had the chance to experiment
with it. It seems to be coming along nicely and the performance is great.
Are
Message -
From: Garrett Wollman [EMAIL PROTECTED]
To: Thomas T. Veldhouse [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Friday, July 21, 2000 3:04 PM
Subject: Journaling Filesystem ?
On Fri, 21 Jul 2000 14:58:43 -0500, "Thomas T. Veldhouse"
[EMAIL PROTECTED] said:
Are t
This happened to me when I was using cvsup-bin. I didn't want all of the
modula overhead. Any ideas?
Tom Veldhouse
[EMAIL PROTECTED]
On Mon, 17 Apr 2000, Stephen J. Roznowski wrote:
On 17 Apr, Jason wrote:
I didn't know here to send this, but I thought that other people trying
to keep
Maybe I missed something - but I think you want "YES" instead of "true".
It says true in /etc/defaults/make.conf. That is why I used it instead of
YES or yes.
Tom Veldhouse
[EMAIL PROTECTED]
You are correct. We seem to have some odd conventions. "YES" in rc.conf
and "TRUE" in
Why is this machine (current.freebsd.org) always rejecting guest privileges
and why won't ANYBODY answer the question?
Thanks in advance,
Tom Veldhouse
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Are there any plans to merge perl-5.6.0 into current? I don't have any
plans for using it currently, but I curious.
Thanks,
Tom Veldhouse
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Good luck getting an answer. Nobody seems willing to answer this
question. :(
Tom Veldhouse
[EMAIL PROTECTED]
On Tue, 28 Mar 2000, James FitzGibbon wrote:
Is this a transient situation, or is current down for maintainance ?
[central-01:james] ~ (2) ftp -a current.freebsd.org
Connected
What is going on with that server? It seems to be denying requests more
than accepting them these days.
[9:08am] 5 [~/FreeBSD]:cascade% ncftp3 current.freebsd.org
NcFTP 3.0.0 (March 20, 2000) by Mike Gleason ([EMAIL PROTECTED]).
Copyright (c) 1992-1999 by Mike Gleason.
All rights reserved.
What kind of drivers are these? Are these ports of the ALSA drivers, or are
they more OSS?
Tom Veldhouse
[EMAIL PROTECTED]
I applied the patch to a machine which is *just* pre 4/5 split and it
patched
fine.
I used it to get my ALS120 to work.
To Unsubscribe: send mail to [EMAIL
This is an old debate. However, if the user is not smart enough to know
that a "not" release is new and should be tested, well, that speaks volumes
itself doesn't it?
Tom Veldhouse
[EMAIL PROTECTED]
- Original Message -
From: David Murphy [EMAIL PROTECTED]
To: Brad Knowles [EMAIL
I just tried it against 4.0-STABLE (03222000). The patch
(http://www.freebsd.org/~cg/current.diff.gz) applied 100% successfully
(I assume sound has not yet diverged much in 5.0 except for Voxware). I
don't get any sound when using KMP3. I just get a pulse sound in the
speaker when the app
Where did the compat3x install files go in the latest 4.0-STABLE
snapshot? They seem to be missing.
Tom Veldhouse
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
I have an older Pentium box that has a MATSHITA CR-581/1.04 (as seen from
3.4-STABLE) CD drive (4x) on the fourth IDE interface (second IDE controller
slave). The IDE controller is the buggy CMD640B. I have been trying to
install 4.0-CURRENT-2214 to no avail. I get the following errors (I
Here is the answer I was given by somebody on this list last week.
#/etc/pam.conf
# tricky tricky forgive me
xserver authsufficient pam_permit.so no_use
# If we don't match anything else, default to using getpwnam().
other authrequiredpam_unix.so
I am using yesterday's snapshot (12-27). /etc/pam.conf is dated 12/21.
Tom Veldhouse
[EMAIL PROTECTED]
Mark Murray wrote:
I just got my box up and running Current 12-27. ATA works great for =
both drives now. However, I compiled XFree86 from the port and I chose =
the options
Nope! Not too tricky. Should this be added to the file permanantly, or
perhaps as part of the port?
Tom Veldhouse
[EMAIL PROTECTED]
Clive Lin wrote:
On Mon, Dec 27, 1999 at 11:01:50PM -0600, Thomas T. Veldhouse wrote:
Hello,
I just got my box up and running Current 12-27. ATA
I have noticed that /etc/make.conf is missing from the current source
tree and I can not find any mention of its removal anywhere. Where did
it go?
Tom Veldhouse
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Hello,
I just got my box up and running
Current 12-27. ATA works great for both drives now. However, I
compiled XFree86 from the port and I chose the options for RPC, Wraphelp.c, PAM
and threads. When I start x (using startkde), I get many many password
prompts. I can only assume that the
Hello,
I just got my box up and running Current 12-27. ATA works great for
both drives now. However, I compiled XFree86 from the port and I chose the
options for RPC, Wraphelp.c, PAM and threads. When I start x (using
startkde), I get many many password prompts. I can only assume that
Hello,
I have been trying to get my Asante (tulip) card to work under FreeBSD.
I used the same card on an older machine (PII-333), but had PNP shut off in
the BIOS. My new machine does not have the option to shut off PNP in the
BIOS (blame Compaq). The de0 device is found and the network
To follow up to myself. I wanted to say that my reference to the mx drivers
was using a different NIC. It was a Linksys 10/100 using PNIC II.
Tom Veldhouse
[EMAIL PROTECTED]
- Original Message -
From: "Thomas T. Veldhouse" [EMAIL PROTECTED]
To: "FreeBSD-Current" [E
I seem to be having a problem with the my Western Digital Caviar 6.4GB
UDMA33 (5400RPM?) Hard Drive. I get the following error:
ad0: WDC WD200BA/P76CA30A ATA-4 disk at ata0 as master
ad0: 19092MB (39102336 sectors), 38792 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
Same settings under Windows and same I have used under Linux [with the 2.2
kernels].
Tom Veldhouse
ve...@visi.com
-Original Message-
From: Doug White dwh...@resnet.uoregon.edu
To: Thomas T. Veldhouse ve...@visi.com
Cc: FreeBSD-Current freebsd-current@FreeBSD.ORG
Date: Tuesday, May 18
I have a Yamaha-SA3 card built into my motherboard. I uses the pcm drivers
for sound. My system is current as of two days ago.
I just installed KDE-1.1.1 (curious about performance) and I was testing out
the one and only sound that seems to come with it. It seems that the sound
device is
Have you tried using the C++ standard way? It works.
#include iostream
#include string
using namespace std;
Of course, there are many times you won't want to include the entire
namespace.
Tom Veldhouse
ve...@visi.com
On Thu, 13 May 1999, Thomas Dean wrote:
I think I missed something,
A spammer could simply become a list member and then SPAM. They won't care
if they are removed once they have perpetrated their abuse.
Tom Veldhouse
ve...@visi.com
-Original Message-
From: Mark Murray m...@grondar.za
To: Jonathan M. Bresler j...@hub.freebsd.org
Cc: curr...@freebsd.org
I had this problem on a Linux box a little while back. It also used
egcs-1.1.2. I suspect there is a problem with the compiler or the configure
script of the kde tarball.
Tom Veldhouse
ve...@visi.com
-Original Message-
From: Tomer Weller s...@i.am
To: FreeBSD Current
Hi all,
I CVSUP'd last night (4-21-99) to the latest and greatest. I created
a
completely new kernel configuration file based upon GENERIC and LINT. My
problem arose when I added the support for pnp0. I have a Yamaha sound
card (pcm0) which needs PNP. When compiling the kernel, it failed
Read the recent posts. Let me guess, you have probably done a fairly recent
cvsup (sunday evening?) and you built world. You now have egcs as your
compiler (gcc -v). The best thing to do, at least the easiest to tell you
to do, is to simply cvsup the sources again and make the world. You
Mine shows:
Using builtin specs.
gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)
Everything is well. I haven't tried out C++ yet though.
Tom Veldhouse
ve...@visi.com
-Original Message-
From: The Hermit Hacker scra...@hub.org
To: Wilko Bulte wi...@yedi.iaf.nl
Cc:
I get the following when trying to build the following very simple C++ test:
// begin program
#include iostream
using namespace std;
int main(int argc, char** argv) {
cout Hello World!!!\n endl;
return 0;
}
// end program
c++ foobar.cc -o foobar
/usr/lib/libstdc++.so:
I made the original post with the below program. I have rebuilt the entire
world using -O2 -pipe -mpentiumpro and all works well. I can safely report
the problem has disappeared. I though I would attempt compiling Qt and see
how that works. I will report back if a problem arrises.
Tom
Besides, I can not imagine the base system is going to track egcs. At some
point we will have a newer egcs port and the older system compiler, much as
it was before. At least that is my take on things.
Tom Veldhouse
ve...@visi.com
-Original Message-
From:
I have run into this in the past too, when a bad file was encountered on the
CD (home burned CDR). The system did not shut down though, it just kept on
working.
Tom Veldhouse
ve...@visi.com
-Original Message-
From: Nick Hibma nick.hi...@jrc.it
To: FreeBSD current mailing list
Will the new ATAPI drivers still work with wormcontrol for ATAPI CD Writers?
Since it is a WIP, will it support it if it doesn't?
Tom Veldhouse
ve...@visi.com
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
Also, as a side note, how do I set up my box to use PostFix instead of
sendmail? I heard that it was (or was considered) included in the
3.1-RELEASE, it just wasn't enabled by default.
It was shouted down as unnecessary bloat in favour of a port. However, I
haven't seen this port submitted
I have been seeing 5 hour delays from when the message was sent to the list
and when the message arrives in my mailbox. It seems to be a problem with
the following jump:
Received: from hub.freebsd.org (hub.FreeBSD.ORG [204.216.27.18])
by mail2.sol.net (8.8.8/8.8.8/SNNS-1.02) with ESMTP id
There is a [good?] g77 port built into egcs-1.1.1, although I have never
used it.
Why would gcc-2.8.x be the stock compiler versus the [better?] egcs-1.1.x?
C++ comes along for free in all it's glory.
Tom Veldhouse
ve...@visi.com
If it is decided that Fortran support will disappear from the
By bloat, I assume you mean disk space. There should not be any difference
as far as code bloat goes (i.e. templates in C++ are known to be prone to
code bloat). Executables are probably a bit smaller than the g77 port due
to the newer optimizations in egcs. If you are worried about disk space,
At the prompt:
set boot_userconfig
boot
Tom Veldhouse
ve...@visi.com
-Original Message-
From: Donn Miller dmm...@bellatlantic.net
To: Kris Kennaway kkenn...@physics.adelaide.edu.au
Cc: curr...@freebsd.org curr...@freebsd.org
Date: Monday, February 15, 1999 6:34 AM
Subject: Re:
There is a known problem with spontaneous reboots you should be aware about.
Please look at the thread over the last few days. My advice would be to use
2.2-STABLE if you can until this is fixed. I have run into this on one of
my machines. It seems to be network related. I am assuming (we know
Has the boot loader / kernel been changed to allow booting off of the
secondary IDE master yet, or more correctly, has a solution been found (for
3.0-STABLE)? I have been using a patch created by somebody on the list from
a few days back that has worked quite well. However, I have noted a lot
I completely re-cvsuped the sources and I still get errors in libpam.
Here is my make.conf:
# $Id: make.conf,v 1.70 1998/10/16 03:26:54 peter Exp $
#
# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
# It allows you to override macro definitions to make without changing
Has this been done yet? It has been over 7 hours since the post and I
have only seen two source changes, and they are in sys/pci by roger.
Tom Veldhouse
ve...@visi.com
Mark Murray wrote:
Julian Elischer wrote:
can you announce when the fixes are in place?
I'll do better; I am about to
Never mind, I was using the RELENG_3 tag during CVSup. Sorry.
Thomas T. Veldhouse wrote:
Has this been done yet? It has been over 7 hours since the post and I
have only seen two source changes, and they are in sys/pci by roger.
Tom Veldhouse
ve...@visi.com
Mark Murray wrote:
Julian
It seems to be the same problem we have been having with current.
Should it be crypt stuff be backed out of here as well?
=== libpam/modules/pam_radius
=== libpam/modules/pam_skey
=== libpam/modules/pam_tacplus
=== libpam/modules/pam_unix
=== libpam/libpam
ld -o pam_static_modules.o -r
FYI. That had no affect for me at all. I was able to pass the kernel the
rootdev by:
boot -rootdev kernel
but then I had a problem when it came time to mount root as read/write. It
mounted read-only successfully and then bailed because it couldn't remount
as read/write.
OK. I have tried to figure out how to boot off of my second IDE drive and I
am close, but I still haven't got it. I need to boot wd2s1a. Here is what
I have done.
Booting off of a floppy with the old boot blocks:
1:wd(2,a)/boot/loader
I get to the prompt and type:
set
77 matches
Mail list logo
