Re: Need help with New Build -- Skylake

2015-12-23 Thread Vijay Rjah



On 12/23/15 2:29 AM, Ed Maste wrote:

On 22 December 2015 at 12:39, Vijay Rjah <m...@rvijay.me> wrote:

The only issue i have is that the boot process takes a lot of time..
(similar to
https://forums.freebsd.org/threads/new-motherboard-and-processor-kernel-load-very-slow.53511/
). the system ultimately boots, but boot times are around 4 - 5 Mins..

How do I debug it? any suggestions?

A useful first step is to get a verbose boot ("boot -v" from the
loader prompt) and note where there are any large or unexpected
delays. The "memory test" that was responsible for many reports of
slow FreeBSD boots has been disabled in 11.x for quite some time, so
it won't be that.
___
freebsd-questi...@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

Thanks for your reply..

It takes about 3-4 Mins just to get to the boot option screen.. ( I mean 
the menu where it lets you select multi/single user mode etc...)


I have attached the output of "boot -v"..

-Thanks
Vijay
Dec 23 23:03:13 vrajah-bsd syslogd: kernel boot file is /boot/kernel/kernel
Dec 23 23:03:13 vrajah-bsd kernel: Table 'FACP' at 0x8ad96270
Dec 23 23:03:13 vrajah-bsd kernel: Table 'APIC' at 0x8ad96380
Dec 23 23:03:13 vrajah-bsd kernel: APIC: Found table at 0x8ad96380
Dec 23 23:03:13 vrajah-bsd kernel: APIC: Using the MADT enumerator.
Dec 23 23:03:13 vrajah-bsd kernel: MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
Dec 23 23:03:13 vrajah-bsd kernel: SMP: Added CPU 0 (AP)
Dec 23 23:03:13 vrajah-bsd kernel: MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
Dec 23 23:03:13 vrajah-bsd kernel: SMP: Added CPU 2 (AP)
Dec 23 23:03:13 vrajah-bsd kernel: MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
Dec 23 23:03:13 vrajah-bsd kernel: SMP: Added CPU 1 (AP)
Dec 23 23:03:13 vrajah-bsd kernel: MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
Dec 23 23:03:13 vrajah-bsd kernel: SMP: Added CPU 3 (AP)
Dec 23 23:03:13 vrajah-bsd kernel: Copyright (c) 1992-2015 The FreeBSD Project.
Dec 23 23:03:13 vrajah-bsd kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 
1989, 1991, 1992, 1993, 1994
Dec 23 23:03:13 vrajah-bsd kernel: The Regents of the University of California. 
All rights reserved.
Dec 23 23:03:13 vrajah-bsd kernel: FreeBSD is a registered trademark of The 
FreeBSD Foundation.
Dec 23 23:03:13 vrajah-bsd kernel: FreeBSD 11.0-CURRENT #0 r291495: Mon Nov 30 
23:14:34 UTC 2015
Dec 23 23:03:13 vrajah-bsd kernel: 
r...@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
Dec 23 23:03:13 vrajah-bsd kernel: FreeBSD clang version 3.7.0 
(tags/RELEASE_370/final 246257) 20150906
Dec 23 23:03:13 vrajah-bsd kernel: WARNING: WITNESS option enabled, expect 
reduced performance.
Dec 23 23:03:13 vrajah-bsd kernel: PPIM 0: PA=0xa, VA=0x8261, 
size=0x1, mode=0
Dec 23 23:03:13 vrajah-bsd kernel: VT(vga): resolution 640x480
Dec 23 23:03:13 vrajah-bsd kernel: Preloaded elf kernel "/boot/kernel/kernel" 
at 0x82419000.
Dec 23 23:03:13 vrajah-bsd kernel: Preloaded /boot/entropy "/boot/entropy" at 
0x82419e48.
Dec 23 23:03:13 vrajah-bsd kernel: Preloaded elf obj module 
"/boot/kernel/zfs.ko" at 0x82419e98.
Dec 23 23:03:13 vrajah-bsd kernel: Preloaded elf obj module 
"/boot/kernel/opensolaris.ko" at 0x8241a680.
Dec 23 23:03:13 vrajah-bsd kernel: Calibrating TSC clock ... TSC clock: 
3696187166 Hz
Dec 23 23:03:13 vrajah-bsd kernel: CPU: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz 
(3696.19-MHz K8-class CPU)
Dec 23 23:03:13 vrajah-bsd kernel: Origin="GenuineIntel"  Id=0x506e3  
Family=0x6  Model=0x5e  Stepping=3
Dec 23 23:03:13 vrajah-bsd kernel: 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Dec 23 23:03:13 vrajah-bsd kernel: 
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Dec 23 23:03:13 vrajah-bsd kernel: AMD 
Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Dec 23 23:03:13 vrajah-bsd kernel: AMD Features2=0x121<LAHF,ABM,Prefetch>
Dec 23 23:03:13 vrajah-bsd kernel: Structured Extended 
Features=0x29c67af<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Dec 23 23:03:13 vrajah-bsd kernel: XSAVE 
Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Dec 23 23:03:13 vrajah-bsd kernel: VT-x: Basic 
Features=0xda0400<SMM,INS/OUTS,TRUE>
Dec 23 23:03:13 vrajah-bsd kernel: Pin-Based 
Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
Dec 23 23:03:13 vrajah-bsd kernel: Primary Processor 
Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,

Re: Need help with New Build -- Skylake

2015-12-22 Thread Vijay Rjah



On 12/19/15 4:23 PM, Vijay Rjah wrote:

Hello,

I'm planning to build a file server for my home.

I'm planning on using the B150 Intel chipset (specifically this MoBo: 
http://www.msi.com/product/motherboard/B150M-PRO-VDH.html#hero-overview)


This has Realtek RTL8111H Gigabit LAN controller, Does FreeBSD support 
this? (the man page for mentions support for 8111)


This is going to be a headless setup, hence I'm not concerned with 
lack of x11 support. (I'm assuming console works)


Does any one in the list have any experiences with this 
Chipset/Motherboard.


-Thanks in advance
Vijay
___
freebsd-questi...@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to 
"freebsd-questions-unsubscr...@freebsd.org"

Hi,

I actually went ahead and bought the system. Here is my config

CPU: Intel I3-6100
Mobo: MSI B150M-PRO-VDH
NIC: RTL8111H (on-Board)
RAM: Hyperx DDR4 8 GB

I initially tried to use UEFI-10.2 Release image. But the system was 
repeatedly crashing just after the loader prompt... (PANICS)
I tried installing with 10.2-Release (with BIOS).. But, NIC wasn't 
detected.


It seems the NIC driver was added around September' 15 to the FreeBSD 
tree in github  ( 
https://github.com/freebsd/freebsd/commit/c1d4644cbc1efd41f962e4979caf367c93d3c5f0 
)


I tried installing with 11.0-Current ( Legacy BIOS boot ), NIC works. 
got it installed..


The only issue i have is that the boot process takes a lot of time..  
(similar to 
https://forums.freebsd.org/threads/new-motherboard-and-processor-kernel-load-very-slow.53511/ 
). the system ultimately boots, but boot times are around 4 - 5 Mins..


How do I debug it? any suggestions?

-Thanks
Vijay

PS: Here is the output of pciconf -lv

root@vrajah-bsd:~ # pciconf -lv
hostb0@pci0:0:0:0:class=0x06 card=0x79821462 chip=0x190f8086 
rev=0x07 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sky Lake Host Bridge/DRAM Registers'
class  = bridge
subclass   = HOST-PCI
vgapci0@pci0:0:2:0:class=0x03 card=0x79821462 chip=0x19128086 
rev=0x06 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sky Lake Integrated Graphics'
class  = display
subclass   = VGA
none0@pci0:0:8:0:class=0x088000 card=0x79821462 chip=0x19118086 
rev=0x00 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sky Lake Gaussian Mixture Model'
class  = base peripheral
xhci0@pci0:0:20:0:class=0x0c0330 card=0x79821462 chip=0xa12f8086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H USB 3.0 xHCI Controller'
class  = serial bus
subclass   = USB
none1@pci0:0:20:2:class=0x118000 card=0x79821462 chip=0xa1318086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H Thermal subsystem'
class  = dasp
none2@pci0:0:21:0:class=0x118000 card=0x79821462 chip=0xa1608086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H LPSS I2C Controller'
class  = dasp
none3@pci0:0:21:1:class=0x118000 card=0x79821462 chip=0xa1618086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H LPSS I2C Controller'
class  = dasp
none4@pci0:0:22:0:class=0x078000 card=0x79821462 chip=0xa13a8086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H CSME HECI'
class  = simple comms
ahci0@pci0:0:23:0:class=0x010601 card=0x79821462 chip=0xa1028086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
class  = mass storage
subclass   = SATA
pcib1@pci0:0:28:0:class=0x060400 card=0x79821462 chip=0xa1148086 
rev=0xf1 hdr=0x01

vendor = 'Intel Corporation'
device = 'Sunrise Point-H PCI Express Root Port'
class  = bridge
subclass   = PCI-PCI
none5@pci0:0:30:0:class=0x118000 card=0x79821462 chip=0xa1278086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H LPSS UART'
class  = dasp
isab0@pci0:0:31:0:class=0x060100 card=0x79821462 chip=0xa1488086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H LPC Controller'
class  = bridge
subclass   = PCI-ISA
none6@pci0:0:31:2:class=0x058000 card=0x79821462 chip=0xa1218086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H PMC'
class  = memory
hdac0@pci0:0:31:3:class=0x040300 card=0xf9821462 chip=0xa1708086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H HD Audio'
class  = multimedia
subclass   = HDA
none7@pci0:0:31:4:class=0x0c0500 card=0x79821462 chip=0xa1238086 
rev=0x31 hdr=0x00

vendor = 'Intel Corporation'
device = 'Sunrise Point-H SMBus'
class  = serial bus