You have 5 Pending incoming emails

[freebsd . org support]

___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Auto-reply: Re: Re: Details

[support]

 This is an automated response. Please read this important message.

Please use one of the following to contact a Customer Support Representative:

For domain names purchased directly through Register.com, please visit us at:
Register.com Customer Support
http://register.com/create_ticket.cgi

For domain names purchased through one of our Global Network Partners, please visit us 
at:
Register.com’s Global Partner Network Support Web Site
http://gpn-enduser.register.com




Sincerely,
Customer Support
 
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]

Auto-reply: Re: Re: Details

[support]

 This is an automated response. Please read this important message.

Please use one of the following to contact a Customer Support Representative:

For domain names purchased directly through Register.com, please visit us at:
Register.com Customer Support
http://register.com/create_ticket.cgi

For domain names purchased through one of our Global Network Partners, please visit us 
at:
Register.com’s Global Partner Network Support Web Site
http://gpn-enduser.register.com




Sincerely,
Customer Support
 
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: freebsd-current Digest, Vol 12, Issue 13

[support]

Please use our new ticket-based support system.  Doing so will allow us to handle your 
request more efficiently and quickly.

http://www.wasabihosting.com/helpdesk


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: freebsd-current Digest, Vol 12, Issue 14

[support]

Please use our new ticket-based support system.  Doing so will allow us to handle your 
request more efficiently and quickly.

http://www.wasabihosting.com/helpdesk


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]

Virus Removal Notification

[support]

On 6/7/2003 the OWLS, Inc. mail server processed a message from your address that 
contained the W32/Sobig-C virus. The message was sent to [EMAIL PROTECTED]  The OWLS, 
Inc. mail server removed the virus and notified the recipient.

The message, without the detected virus attachments, is attached to this email as a 
zip file.  Please note that the recipient of the original message was also sent this 
attachment.

CleanMessage.zip
Description: Binary data
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Ethernet (xl) will not transmit or receive

[Nick H. -- Technical Support Engineer]

Ive run into the exact same problem on about 8 machines now, all running
different network cards.  The network will just simply not work if I have
IPFILTER built into the kernel.  On some of the machines, I started getting
No route to host.  This has happened on the following network cards:

3COM 3C905C
3COM 3C450 *yes, 450*
Linksys LNE100TX v4
Linksys LNE100TX v5
NETGEAR Fast 100
Intel Pro 10/100+
Intel Pro 10/100/1000 (gigabit over copper)

Im going to assume that since it's not on a specific card, it's not
something with the drivers for that card. The only thing I could do was
deinstall IPFILTER.  I tried wiping the ARP tables (showed incomplete arp
entries for all hosts) and even redoing the routing table.  The only thing
that I could get that would fix it was removing ipfiter.  I have another
5.0-CURRENT machine (FreeBSD 5.0-CURRENT #2: Wed Jan 29 17:55:34 CST 2003
root@edge:/usr/obj/usr/src/sys/edge  i386) that is NOT having this problem.
It's something done fairly recently that has caused this.  Im going to go
through and see if I cant find some differences between the source for that
version and this one: 5.0-CURRENT #1: Wed Feb 19 10:28:49 GMT 2003
root@ender:/usr/obj/usr/src/sys/ender  i386

The second one (last one I gave uname for) is the most recent to have the
problems. As you can see, it's source from earlier this week.  There's no
errors on dmesg nor are there any errors anywhere.  It just seems that if
IPFILTER is enabled, the network devices are completely inoperable.   I know
you're going to ask how I have the rules setup, and I have tried many
variations.  The first I tried is a DEFAULT_BLOCK using a working ruleset
from a 4.7-R-p3 machine.  After that failed, I tried doing a default allow,
and it still did it.  The only feasible way to get the machine online with
that source is to rip out IPFILTER.   Anyone having similiar issues?

Any comments/suggestions would be more than welcome, as having boxes on the
network with no firewall is just asking for trouble ;)



Regards,
Nick H.
[EMAIL PROTECTED]



- Original Message -
From: Jan Schlesner [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 20, 2003 12:44 PM
Subject: Re: Ethernet (xl) will not transmit or receive


: Hi,
:
: On Thu, Feb 20, 2003 at 11:32:04AM -0500, Andrew R. Reiter wrote:
:  I experienced similar issues yesterday when just installing release 5
from
:  ftp (floppy boot).  I essentially had to ifconfig the device down and
then
:  back up and it then seemed to continue ok... but I think there most
likely
:  something odd going on :/
: 
:  On Thu, 20 Feb 2003, Kevin Oberman wrote:
:  :I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
:  :and the Ethernet was not working. I tried again last night with no
:  :change in behavior.
:  :
:  :The system is an AMD K6-2 on an ASUS P5A mobo. I have a 3Com 3c905B
:  :Ethernet which had been working fine on a kernel built in late
:  :January.
:  :
:  :The dmesg is not too meaningful, but the system shows no errors. It
:  :simply never receives a packet. ARPs are all incomplete and no packets
:  :are transmitted although netstat -in indicates that they are. The
:  :packets never actually reach the wire, though.
:  :
:  :I can't believe that no one else has this card, but I didn't find
:  :anything in the archives on it.
:  :
:  :Any idea what needs to be rolled back and how far? I'm suspicious that
:  :it might be an mii problem. Maybe even an interrupt issue. I an
:  :suspicious of the second, empty xlphy0: line in the dmesg, but the
:  :reported MAC is right and my old kernel that works seems to generate a
:  :similar empty line.
:
: I have had the same problem with a 3Com 3c905B-COMBO. But the system
: was a 4.7-RELEASE. If you used the the media-Option in /etc/rc.conf it
: doesn't work. It was necessary to boot the system with a wrong media
: type, mark the interface down and mark the interface up with the correct
: media type. Than it works. But at that time I had no time to analyse
: this behaviour.
:
: Jan
:
: Here are the old boot messages (no errors):
:
: FreeBSD 4.7-RELEASE #0: Wed Oct  9 15:08:34 GMT 2002
: Copyright (c) 1992-2002 The FreeBSD Project.
: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
: The Regents of the University of California. All rights reserved.
: FreeBSD 4.7-RELEASE #0: Wed Oct  9 15:08:34 GMT 2002
: [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
: Timecounter i8254  frequency 1193182 Hz
: CPU: AMD Duron(tm) Processor (756.74-MHz 686-class CPU)
:   Origin = AuthenticAMD  Id = 0x631  Stepping = 1
:
Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR
:   AMD Features=0xc044b18,AMIE,DSP,3DNow!
: real memory  = 134135808 (130992K bytes)
: avail memory = 125349888 (122412K bytes)
: Preloaded elf kernel kernel at 0xc050f000.
: Preloaded userconfig_script /boot/kernel.conf at 0xc050f09c.
: Pentium Pro MTRR support enabled
: md0: Malloc disk

make buildkernel failure

[Nick H. -- Technical Support Engineer]

I've now run into this 2 times this week...  doing a make buildkernel with
pretty much generic (SMP turned on and IPFILTER enabled with logging and
default block):



/usr/src/sys/kern/kern_subr.c:557: undefined reference to `sched_prio'
kern_switch.o: In function `choosethread':
/usr/src/sys/kern/kern_switch.c:126: undefined reference to `sched_choose'
kern_switch.o: In function `kse_reassign':
/usr/src/sys/kern/kern_switch.c:278: undefined reference to `sched_add'
kern_switch.o: In function `adjustrunqueue':
/usr/src/sys/kern/kern_switch.c:395: undefined reference to `sched_rem'
/usr/src/sys/kern/kern_switch.c:396: undefined reference to `sched_add'
/usr/src/sys/kern/kern_switch.c:411: undefined reference to `sched_rem'
kern_switch.o: In function `setrunqueue':
/usr/src/sys/kern/kern_switch.c:493: undefined reference to `sched_rem'
/usr/src/sys/kern/kern_switch.c:556: undefined reference to `sched_add'
kern_synch.o: In function `msleep':
/usr/src/sys/kern/kern_synch.c:242: undefined reference to `sched_sleep'
kern_synch.o: In function `mi_switch':
/usr/src/sys/kern/kern_synch.c:503: undefined reference to `sched_switchout'
/usr/src/sys/kern/kern_synch.c:509: undefined reference to `sched_switchin'
kern_synch.o: In function `setrunnable':
/usr/src/sys/kern/kern_synch.c:578: undefined reference to `sched_wakeup'
kern_synch.o: In function `yield':
/usr/src/sys/kern/kern_synch.c:658: undefined reference to `sched_prio'
kern_thread.o: In function `threadinit':
/usr/src/sys/kern/kern_thread.c:623: undefined reference to
`sched_sizeof_thread'
/usr/src/sys/kern/kern_thread.c:639: undefined reference to
`sched_sizeof_ksegrp'
/usr/src/sys/kern/kern_thread.c:642: undefined reference to
`sched_sizeof_kse'
subr_trap.o: In function `userret':
/usr/src/sys/kern/subr_trap.c:96: undefined reference to `sched_userret'
subr_trap.o: In function `ast':
/usr/src/sys/kern/subr_trap.c:245: undefined reference to `sched_prio'
ksched.o: In function `ksched_attach':
/usr/src/sys/posix4/ksched.c:62: undefined reference to `sched_rr_interval'
ksched.o: In function `ksched_setscheduler':
/usr/src/sys/posix4/ksched.c:192: undefined reference to `sched_prio'
/usr/src/sys/posix4/ksched.c:222: undefined reference to `sched_prio'
vm_zeroidle.o: In function `vm_pagezero':
/usr/src/sys/vm/vm_zeroidle.c:132: undefined reference to `sched_runnable'
vm_pageout.o: In function `vm_pageout_scan':
/usr/src/sys/vm/vm_pageout.c:1237: undefined reference to `sched_nice'
machdep.o: In function `cpu_idle':
/usr/src/sys/i386/i386/machdep.c:1028: undefined reference to
`sched_runnable'
*** Error code 1

Stop in /usr/obj/usr/src/sys/Harms.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.


That's pretty much what happens.  Any ideas/suggestions on fixing?  This
kernconf worked fine on the CVS from about 2 weeks ago.



Regards,
Nick H.
Technical Support Engineer
[EMAIL PROTECTED]

Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsupport.com/

---
Privileged/Confidential Information may be contained in this message.  If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone.  In such case, you should destroy this message and kindly
notify the sender by reply email.  Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.



To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Re: make buildkernel failure

[Nick H. -- Technical Support Engineer]

options SCHED_4BSD  #4BSD scheduler


It's in there.



Regards,
Nick H.
Technical Support Engineer
[EMAIL PROTECTED]

Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsupport.com/

---
Privileged/Confidential Information may be contained in this message.  If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone.  In such case, you should destroy this message and kindly
notify the sender by reply email.  Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.

- Original Message -
From: Julian Elischer [EMAIL PROTECTED]
To: Nick H. -- Technical Support Engineer [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, February 03, 2003 7:05 PM
Subject: Re: make buildkernel failure


:
: read UPDATING and look for teh paragraph about the new scheduler
: options.
:
: I disagree strongly with needing an option to keep the current
: scheduler..
: I think no option should give teh default scheduler.. after
: all, you need one...
:
:
: On Mon, 3 Feb 2003, Nick H. -- Technical Support Engineer wrote:
:
:  I've now run into this 2 times this week...  doing a make buildkernel
with
:  pretty much generic (SMP turned on and IPFILTER enabled with logging and
:  default block):
: 
: 
: 
:  /usr/src/sys/kern/kern_subr.c:557: undefined reference to `sched_prio'
:  kern_switch.o: In function `choosethread':
:  /usr/src/sys/kern/kern_switch.c:126: undefined reference to
`sched_choose'
:  kern_switch.o: In function `kse_reassign':
:  /usr/src/sys/kern/kern_switch.c:278: undefined reference to `sched_add'
:  kern_switch.o: In function `adjustrunqueue':
:  /usr/src/sys/kern/kern_switch.c:395: undefined reference to `sched_rem'
:  /usr/src/sys/kern/kern_switch.c:396: undefined reference to `sched_add'
:  /usr/src/sys/kern/kern_switch.c:411: undefined reference to `sched_rem'
:  kern_switch.o: In function `setrunqueue':
:  /usr/src/sys/kern/kern_switch.c:493: undefined reference to `sched_rem'
:  /usr/src/sys/kern/kern_switch.c:556: undefined reference to `sched_add'
:  kern_synch.o: In function `msleep':
:  /usr/src/sys/kern/kern_synch.c:242: undefined reference to `sched_sleep'
:  kern_synch.o: In function `mi_switch':
:  /usr/src/sys/kern/kern_synch.c:503: undefined reference to
`sched_switchout'
:  /usr/src/sys/kern/kern_synch.c:509: undefined reference to
`sched_switchin'
:  kern_synch.o: In function `setrunnable':
:  /usr/src/sys/kern/kern_synch.c:578: undefined reference to
`sched_wakeup'
:  kern_synch.o: In function `yield':
:  /usr/src/sys/kern/kern_synch.c:658: undefined reference to `sched_prio'
:  kern_thread.o: In function `threadinit':
:  /usr/src/sys/kern/kern_thread.c:623: undefined reference to
:  `sched_sizeof_thread'
:  /usr/src/sys/kern/kern_thread.c:639: undefined reference to
:  `sched_sizeof_ksegrp'
:  /usr/src/sys/kern/kern_thread.c:642: undefined reference to
:  `sched_sizeof_kse'
:  subr_trap.o: In function `userret':
:  /usr/src/sys/kern/subr_trap.c:96: undefined reference to `sched_userret'
:  subr_trap.o: In function `ast':
:  /usr/src/sys/kern/subr_trap.c:245: undefined reference to `sched_prio'
:  ksched.o: In function `ksched_attach':
:  /usr/src/sys/posix4/ksched.c:62: undefined reference to
`sched_rr_interval'
:  ksched.o: In function `ksched_setscheduler':
:  /usr/src/sys/posix4/ksched.c:192: undefined reference to `sched_prio'
:  /usr/src/sys/posix4/ksched.c:222: undefined reference to `sched_prio'
:  vm_zeroidle.o: In function `vm_pagezero':
:  /usr/src/sys/vm/vm_zeroidle.c:132: undefined reference to
`sched_runnable'
:  vm_pageout.o: In function `vm_pageout_scan':
:  /usr/src/sys/vm/vm_pageout.c:1237: undefined reference to `sched_nice'
:  machdep.o: In function `cpu_idle':
:  /usr/src/sys/i386/i386/machdep.c:1028: undefined reference to
:  `sched_runnable'
:  *** Error code 1
: 
:  Stop in /usr/obj/usr/src/sys/Harms.
:  *** Error code 1
: 
:  Stop in /usr/src.
:  *** Error code 1
: 
:  Stop in /usr/src.
: 
: 
:  That's pretty much what happens.  Any ideas/suggestions on fixing?  This
:  kernconf worked fine on the CVS from about 2 weeks ago.
: 
: 
: 
:  Regards,
:  Nick H.
:  Technical Support Engineer
:  [EMAIL PROTECTED]
: 
:  Please rate my performance! http://www.supportteam.net/rate.php3
:  Please submit all new support requests to
:  http://ticketmonster.hostingsupport.com/
: 
:  ---
:  Privileged/Confidential Information may be contained in this message.
If
:  you are not the addressee indicated in this message (or responsible for
:  delivery of the message

Re: make buildworld failure

[Nick H. -- Technical Support Engineer]

Same problem here:

cc1: warnings being treated as errors
/usr/src/crypto/telnet/libtelnet/enc_des.c: In function `fb64_start':
/usr/src/crypto/telnet/libtelnet/enc_des.c:214: warning: implicit
declaration of function `des_new_random_key'
*** Error code 1

Stop in /usr/src/secure/lib/libtelnet.
*** Error code 1

Stop in /usr/src/secure/lib.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.


Regards,
Nick


- Original Message -
From: leafy [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 29, 2003 5:48 AM
Subject: Re: make buildworld failure


: On Wed, Jan 29, 2003 at 06:16:04AM -0500, Jeff Utter wrote:
:  Yeah, that fixed the above mentioned problem.. however i'm running into
a build problem about an hour later, related to telnet.. maybe it was fixed
overnight in cvs, i'll see if it will build now.
:
: I don't think so, I cvsupped about 30 min ago.
:
:
:
c -O -pipe -march=pentium3 -DENCRYPTION -DAUTHENTICATION -DSRA  -I/usr/src/s
ecu
:
re/lib/libtelnet/../../../crypto/telnet -I/usr/src/secure/lib/libtelnet/../.
./..
:
crypto/telnet/libtelnet -Werror -Wall -Wno-format-y2k -Wno-uninitialized  -c
/u
: sr/src/crypto/telnet/libtelnet/enc_des.c -o enc_des.o
: cc1: warnings being treated as errors
: /usr/src/crypto/telnet/libtelnet/enc_des.c: In function `fb64_start':
: /usr/src/crypto/telnet/libtelnet/enc_des.c:214: warning: implicit
declaration of
:  function `des_new_random_key'
: *** Error code 1
:
: Stop in /usr/src/secure/lib/libtelnet.
: *** Error code 1
:
: Stop in /usr/src/secure/lib.
: *** Error code 1
:
: Stop in /usr/src.
: *** Error code 1
:
: Stop in /usr/src.
: *** Error code 1
:
: Stop in /usr/src.
: *** Error code 1
:
: Stop in /usr/src.
:
: --
: Without the userland, the kernel is useless.
:  --inspired by The Tao of Programming
:
: To Unsubscribe: send mail to [EMAIL PROTECTED]
: with unsubscribe freebsd-current in the body of the message



To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

net-snmp errors

[Nick H. -- Technical Support Engineer]

Sorry about emailing both lists, as Im not sure which one this falls under.
It's a current machine (5.0-CURRENT) and it's a problem with a port
(net-snmp).  Below is what happens:

`VM_METER' undeclared (first use in this function)


Anyone know how to fix this or a way around it?



Regards,
Nick H.
[EMAIL PROTECTED]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

make buildworld failure

[Nick H. -- Technical Support Engineer]

Got this today... src is fresh from cvsup2




mkdep -f
pend -a-I/usr/src/lib/libpam/modules/pam_ssh/../../../../crypto/openssh 
-I/usr/src/lib/libpam/modules/pam_ssh/../../../../contrib/openpam/include -I
/usr/src/lib/libpam/modules/pam_ssh/../../libpam
/usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c
In file included from /usr/src/lib/libpam/modules/pam_ssh/pam_ssh.c:59:
/usr/obj/usr/src/i386/usr/include/openssl/evp.h:111:26: openssl/idea.h: No
such file or directory
mkdep: compile failed
*** Error code 1

Stop in /usr/src/lib/libpam/modules/pam_ssh.
*** Error code 1

Stop in /usr/src/lib/libpam/modules.
*** Error code 1

Stop in /usr/src/lib/libpam.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Re: make buildworld failure

[Nick H. -- Technical Support Engineer]

Anyone know of a way to fix this?  A lot of programs will not install (IE:
net-snmp) with the current status.  I have yet to find where the location of
the file should be... =\  I have tried a couple of spots for the file to go,
yet it still fails in the same spot.  =(



Regards,
Nick H.
[EMAIL PROTECTED]


- Original Message -
From: Jeff Utter [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 28, 2003 7:47 PM
Subject: Re: make buildworld failure


 I'm having the same results here... i've been trying to figure out what
the problem is for a while.. i think it's just not finding idea.h... idea.h
exists in some (other) directory.. i can't tell where it WANTS to find it
though, so i coudl copy it there.

 To Unsubscribe: send mail to [EMAIL PROTECTED]
 with unsubscribe freebsd-current in the body of the message


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Re: make buildworld failure

[Nick H. -- Technical Support Engineer]

Let me know how it goes... I may wanna try that



Regards,
Nick H.
Technical Support Engineer
[EMAIL PROTECTED]

Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsupport.com/

---
Privileged/Confidential Information may be contained in this message.  If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone.  In such case, you should destroy this message and kindly
notify the sender by reply email.  Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.

- Original Message -
From: Jeff Utter [EMAIL PROTECTED]
To: Nick H. -- Technical Support Engineer [EMAIL PROTECTED];
[EMAIL PROTECTED]
Sent: Tuesday, January 28, 2003 9:32 PM
Subject: Re: make buildworld failure


 i think my system is building successfully now.. i did 2 things:

 1.) deleted my whole src tree, and re-downloaded it

 2.) cp /usr/src/crypto/openssl/crypto/idea/idea.h /usr/src/crypto/openssh/

 not sure which one fixed it, but it's been building for about 20 minutes,
and i think it's past the point where it was dying before.

 hope it continus to build, and i hope it works for you too.

 enjoy,
 jeff Utter

  Anyone know of a way to fix this?  A lot of programs will not install
(IE:
  net-snmp) with the current status.  I have yet to find where the
location of
  the file should be... =\  I have tried a couple of spots for the file to
go,
  yet it still fails in the same spot.  =(


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

wifi drivers error - 5.0-CURRENT

[Nick H. -- Technical Support Engineer]

Got this today after cvsup'ing earlier this morning:


if_wi.o: In function `wi_attach':
if_wi.o(.text+0x71d): undefined reference to `ieee80211_rate2media'
if_wi.o(.text+0x85d): undefined reference to `ieee80211_ifattach'
if_wi.o: In function `wi_detach':
if_wi.o(.text+0x8f4): undefined reference to `ieee80211_ifdetach'
if_wi.o: In function `wi_stop':
if_wi.o(.text+0x13e8): undefined reference to `ieee80211_new_state'
if_wi.o: In function `wi_start':
if_wi.o(.text+0x177b): undefined reference to `ieee80211_encap'
if_wi.o(.text+0x17b9): undefined reference to `ieee80211_find_node'
if_wi.o(.text+0x182f): undefined reference to `ieee80211_wep_crypt'
if_wi.o: In function `wi_watchdog':
if_wi.o(.text+0x1cd4): undefined reference to `ieee80211_new_state'
if_wi.o(.text+0x1cec): undefined reference to `ieee80211_watchdog'
if_wi.o: In function `wi_ioctl':
if_wi.o(.text+0x213a): undefined reference to `ieee80211_ioctl'
if_wi.o: In function `wi_media_change':
if_wi.o(.text+0x21df): undefined reference to `ieee80211_media2rate'
if_wi.o: In function `wi_media_status':
if_wi.o(.text+0x239c): undefined reference to `ieee80211_rate2media'
if_wi.o: In function `wi_sync_bssid':
if_wi.o(.text+0x2496): undefined reference to `ieee80211_new_state'
if_wi.o: In function `wi_rx_intr':
if_wi.o(.text+0x288d): undefined reference to `ieee80211_input'
if_wi.o: In function `wi_info_intr':
if_wi.o(.text+0x2ddf): undefined reference to `ieee80211_new_state'
if_wi.o: In function `wi_get_cfg':
if_wi.o(.text+0x3900): undefined reference to `ieee80211_cfgget'
if_wi.o: In function `wi_set_cfg':
if_wi.o(.text+0x3ed5): undefined reference to `ieee80211_cfgset'
if_wi.o: In function `wi_dump_pkt':
if_wi.o(.text+0x5378): undefined reference to `ieee80211_dump_pkt'
*** Error code 1

Stop in /usr/obj/usr/src/sys/Router.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.



It happend on 2 different machines that I have here, so I know it's not a
problem with one of the machines only.   Just a fyi on what was found.  If
you need anything more from me, please feel free to contact me and I'll let
you have what ya need.


Regards,
Nick Hale
[EMAIL PROTECTED]



To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Re: x11/kdebase3 build?

[Nick H. -- Technical Support Engineer]

Considering stable has yet to be released...

I have had no problem getting KDE3.0.5 installed on different machines all
running 5.0-CURRENT (as of the time of kde3 build, it was latest off of
cvsup2).  Granted, it takes forever to install, but beyond that, it's no
problem installing.  I must also say, that after it's done building, it runs
a lot quicker and smoother than on a 4.7-RELEASE-p3 machine I have ;)

cd /usr/ports/x11/kde3/
make install

That's all the commands needed for a generic install of kde3 and all it's
componets.


Regards,
Nick H.
[EMAIL PROTECTED]

- Original Message -
From: Sean Kelly [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 16, 2003 3:14 PM
Subject: x11/kdebase3 build?



To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Re: 5.0 Freezes under high load with SMP.

[Nick H. -- Technical Support Engineer]

Im runnign 5.0-CURRENT on a Gigabyte G6-BXD motherboard with dual pentium 3
450's w/512k cache on each.  Total ram in the machine is 320Mb pc133 (all
mushkin cool series) and it's run without problem.  (Yes, SMP is enabled
and running).  Here's a dmesg clipping:


CPU: Pentium III/Pentium III Xeon/Celeron (448.80-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0x673  Stepping = 3

Features=0x387fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,PN,MMX,FXSR,SSE
real memory  = 335478784 (319 MB)
avail memory = 318316544 (303 MB)
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee0
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee0
acpi_cpu0: CPU port 0x530-0x537 on acpi0
acpi_cpu1: CPU port 0x530-0x537 on acpi0


And on another machine (Dual p3 1.3ghz's 1.5Gb pc133 also running -CURRENT
with SMP)

dmesg clipping:
CPU: Pentium III/Pentium III Xeon/Celeron (1266.25-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0x6b1  Stepping = 1

Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE
real memory  = 1610547200 (1572800K bytes)
avail memory = 1561886720 (1525280K bytes)
cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee0
cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee0


The second machine is running on an Asus motherboard (will get model
shortly) and I have yet to run into any problems.


Regards,
Nick H.
[EMAIL PROTECTED]


- Original Message -
From: Terry Lambert [EMAIL PROTECTED]
To: Wilko Bulte [EMAIL PROTECTED]
Cc: Nate Lawson [EMAIL PROTECTED]; wade [EMAIL PROTECTED];
[EMAIL PROTECTED]
Sent: Tuesday, January 14, 2003 4:06 PM
Subject: Re: 5.0 Freezes under high load with SMP.


 Wilko Bulte wrote:
   On Tue, 14 Jan 2003, wade wrote:
Although GENERIC functions perfectly, when I enable SMP in GENERIC,
the box
freezes during big build jobs ( i.e. buildworld. ).  This box functi
oned
well in SMP mode und 4.7-STABLE.  The big problem is that freezing
does not
leave core files or any other debugging information.
   
Hardware:
  ASUS CUV4X-D
  2 X PIII 600 MHz Coppermine.
  512 MB 133MHz RAM.
 
  Interesting, as I have been trying the last 3 days to reproduce freezes
  that people reported on 5.0 on (specifically) the ASUS BP6 mainboard.
 
  I ran continuous make -j16 buildworlds to see if I could break it, but
  no luck (or very good luck, depends on your perspective ;-)

 Compare CPU steppings, BIOS revisions, advanced BIOS setups,
 amount of L2 cache, and amount of Physical RAM, as well as
 any special hardware.

 My perspective on this is that, from the brevity of the report,
 this could be anything causing, up to and including that it's a
 bad keyboard, and the keyboard driver is hanging, but the OS is
 fine.

 -- Terry

 To Unsubscribe: send mail to [EMAIL PROTECTED]
 with unsubscribe freebsd-current in the body of the message


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Dual CPU (Intel 1.26ghz) -- Need Help Enabling

[Nick H. -- Technical Support Engineer]

Hey guys/gals,

Ive run into a little snag here that Im needing some help with.  Ive enabled
SMP and APIC_IO in the kernel of a 4.7-RELEASE-p3 machine (cvsup'd yesterday
and installed all) yet everything is still showing just one cpu.  Im
positive it's a dual machine cause when I built it I tossed 2 CPUs in =P
Does anyone have any ideas on how to get the second one enabled?

Email me if you wish to see the system information (phpSysInfo) and any
other information you care to see to assist me.  Thanks for the help ;)


Regards,
Nick Harm Hale
[EMAIL PROTECTED]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Multicast Routing

[Nick H. -- Technical Support Engineer]

Anyone have any good how-to's on how to setup a FreeBSD box to do multicast
routing?  Im wanting to setup a FreeBSD gateway that will have a Cable modem
and a DSL modem connected to it.  Any traffic on certain ports I want to go
through (out) one interface (dc0) and the rest to go through the other
interface (dc1) while dc2 is the LAN interface (10.0.0.1).  Any ideas?


Regards,
-Nick Harm Hale
[EMAIL PROTECTED]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Re: 5.0-RC2 informal PR: X hangups using radeon driver

[Nick H. -- Technical Support Engineer]

Hello,

You may wish to run xfree86cfg again and step through the setup.  When it
asks you for a video card, select any ATI card (we'll change this later) and
continue on through the setup of X.  Once you have the config saved, go into
the config and change the driver from ati to radeon and that should load
the radeon drivers.  I am running both RC1 and RC2 (as well as 2 5.0-CURRENT
machines cvsup'd from RC2) all of which are running X and KDE (they're
workstations for friends) and Im not having any issues using a radeon 7500
(or 7000-powered by ati) and the rest are authentic ATI cards.  If you have
any questions, lemmie know.


Regards,
-Nick Harm Hale
[EMAIL PROTECTED]




- Original Message -
From: Gary W. Swearingen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 01, 2003 2:14 PM
Subject: 5.0-RC2 informal PR: X hangups using radeon driver


 I downloaded a 5.0-RC2 ISO, checked the MD5 against a different mirror's
 MD5, burned a CD, diff'ed the CD against the ISO, and installed the OS.
 My first try using the full-GUI X installer failed gracefully (I forget
 the details).  The other two X installers didn't offer to support my
 video card, so I tried the full-GUI one again.  It offered something
 called ati.  I'm not sure why it said ati rather than what my old
 XF86Config used radeon, but it seemed close enough.  IIRC, it wasn't
 and I copied over my old XF86Config.  Starting X several times after
 reboots, it would hang up after 30-120 (?) seconds of use.  Sometimes
 ctrl-alt-bs would kill X and sometimes it would require a hard reboot.

 I did portupgrade -R XFree86 (after installing my old make.conf which
 has CFLAGS= -O -pipe and CPUTYPE=k6-2) and still had the problem.

 I then did a source cvsup (tag=.) and rebuilt world and kernel using
 well-tested steps.  X has not since hung up in about two days (several
 hours of activity).

 CPU : AMD K6-2 500MHz with 128 MB RAM.
 Video : Hightech Information Systems' Excalibur (Radeon 7000 with
TV-OUT)

 FreeBSD boot msg: pci1: ATI model 5159 graphics accelerator at 0.0
 XFree86 4.2.0 says: ATI Radeon VE QY rev 0 (AGP); framebuffer bpp 32;
 ChipID = 0x5159; VideoRAM=65536kB; 64-bit DDR SDRAM


 I have a free partition to do some debugging if there's something I can
 do in a few hours.  I'm no C hacker, but am willing to mess with a
 debugger a bit.  I know how to set up for crash dumps, but that's
 probably not much help here.  Maybe the fact that it works after a cvsup
 means -RC3 will not hang up, but that's just guessing; maybe my
 CPUTYPE=K6-2 fixed it.


 To Unsubscribe: send mail to [EMAIL PROTECTED]
 with unsubscribe freebsd-current in the body of the message


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Re: 5.0 performance (was: 80386 out of GENERIC)

[Nick H. -- Technical Support Engineer]

When I put KDE 3.0.5 on my 5.0-RC1 box it took just about 20 hours (600mhz
with 384MB PC100... backup box ;)) but it runs faster (as compared to KDE on
a 4.7-RELEASE).  Im willing to give up a bit more comiple time to get better
performance out of my apps. =)

-Nick Harm Hale


- Original Message -
From: Cliff L. Biffle [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December 17, 2002 1:29 AM
Subject: Re: 5.0 performance (was: 80386 out of GENERIC)


 On Tuesday 17 December 2002 12:19 am, Garance A Drosihn wrote:
  At 5:58 AM +0100 12/17/02, Cliff Sarginson wrote:
  Also didn't someone mention that GCC has got slower anyway ?
 
  gcc is slower at compiling things.  This is very noticeable when
  you're doing a buildworld.  The code which gcc 3.2.1 produces
  does not seem any slower than the code produced by gcc 2.95.4
  (the version in freebsd-stable).

 Actually, in my benchmarks here, the same code tends to yield much faster
 executables under gcc3, particularly in C++.  But these are limited
 benchmarks (primarily of KDE and my own applications).
 I'm willing to trade some time on the compile (which, with any luck,
happens
 only once) in exchange for speed in the application (which I may use every
 day)! :-)

 -Cliff L. Biffle

 To Unsubscribe: send mail to [EMAIL PROTECTED]
 with unsubscribe freebsd-current in the body of the message


To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

Welcome To Tipclub

[support]

You have been referred to us to receive a Free Trial Membership to the
first-ever online Tip Club.  Tip Club is a local, online sales referral
network whereas you share sales opportunities with members in your
community - online!!!. Some people call them breakfast clubs, lead
networks, or referral clubs. We are the first to do it on the Internet!
Membership is exclusive, once you sign up no other companies in your
industry can join in your area.  For more information, check us out at
http://www.TipClub.com.

If your interested, please reserve your industry opening now.  Email us
back with Yes on the subject line.  Please include in your response your
name, company name, industry and phone number.  We only ask that if you
join, you agree to be an active participant.

If your not interested, just reply No in the subject line and and we
will remove you from our referral list.

Thank you!

Sincerely,

Tip Club Manager

P.S. Refer five people to Tip Club and, if they join, receive a years
membership free!

Learn more about how tip clubs work:
http://www.bni-sac.com/sacbee17jul.html
http://centralohio.thesource.net/Files/9508162.html
http://www.entrepreneur.com/Magazines/MA_SegArticle/0,1539,2669431-,00
html
http://austin.bcentral.com/austin/stories/1997/05/12/smallb4.html
http://www.augustachronicle.com/stories/120699/abc_biztips.shtml
http://columbus.bcentral.com/columbus/stories/1998/09/21/smallb1.html
http://atlanta.bcentral.com/atlanta/stories/1999/07/19/smallb1.html
http://columbus.bcentral.com/columbus/stories/2000/10/09/smallb1.html



To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

$B:#$,%A%c%s%9$G$9$h!*2>EP(B(B$BO?<uIUCf!c%@%&%s<+F09=C[!d(B(B

[b-support]

$B"#"#(B $B7HBSEEOC(B  $B:G?75!$N:G?75!\$7$/$O2<5-#U#R#L$K%"%/%;%9$7$F2<$5$$!#(B
http://cwj.to/link.cgi/ID=441/GO=linker/cwm/keitai_shop/gekiyasu/free.html

$B"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#"#(B

$BFMA3$N%a!<%k<:Ni$$$?$7$^$9!#$b$7!"A4$/6=L#$NL5$$FbMF$H(B
$B$*46$8$K$J$kMM$G$7$?$i!"$*e$N%]%8%7%g%s$,3NJ]$G$-$^$9$h!#(B
$B4X@>CO6h0J30$NJ}$O!"8r495!4pCO6I$,40@.$9$k$^$G(B
$B2>2q0wEPO?$G>R2p3hF0$G$-$^$9!#2>EPO?$OL5NA$G$9!*(B
  $B!1!1!1!1!1!1!1!1!1(B
$B#17nKv$K;%KZ!"El5~!";0=E!"9-Eg4pCO6I$,2TF03+;O$7$^$9!#(B

$B<+F09=C[$J$N$GAa$$!$A!"EPO?$7$?!$A$G$9!#(B
$B:#8=:_!"CN$j9g$$$NCf7xBgJ*%M%C%H%o!<%+!<$K@<$r$+$1$F$$$^$9$N$G!"(B
$B$"$J$?$NEPO?$N$[$&$,Aa$1$l$P$=$NJ}$?$A$,$"$J$?$N%@%&%s$K(B
$B$D$/2DG=@-$O$+$J$j$"$j$^$9!#(B

$B$H$j$"$($:$@$1$NEPO?$b#O#K!#3hF0$9$k$7$J$$$O$^$C$?$/<+M3!#(B
$B$b$&>/$7MM;R$r8+$?$$?M$bEPO?$@$1$J$i7P:QE*IiC4$O$$$C$5$$$J$7!#(B
$B$I$&$;EPO?$O%?%@$@$+$i!&!&!&!!$=$l$G$b%@%&%s$OIU$-$^$9!#(B
$B$H$j$"$($:EPO?$7$F$*$1$P!"$$$:$l$3$H$"$j!*!*!*(B

$B4JC1$J35MW$r=q$$$F$*$-$^$9$N$G>\$7$/$O(B
$B2qpJs#B#O#X!J(B06-6379-6583$B!!Am9g%a%K%e!<$O(B7000#$B!K(B
$B$G0z$-=P$7$F$/$@$5$$!#(B

$B$3$3$,%]%$%s%H!*!*(B $B!c0lHLBhFsR2pNA$,H/@8(B
$B#7!%3FCO$N%j!<%@!<$K$O!"7HBSEEOC$NDj3[%5!<%S%9$,$J$s$HL5NA!*(B

$B!c2q0wFCE5!d(B
$B#1!%@lMQ@~$rMxMQ$7$?;T30EEOC$NDj3[NA6b%5!<%S%9(B
$B#2!%$o$:$+#1#0?M$N>R2p$G2qe$K$h$kG[J,$"$j(B
$B#3!%8D?M8~$1%[!<%`%Z!<%8!J:n@.$+$i8x3+$^$G#1%v7n#8#3#31_!K(B
$B#4!%%Q%=%3%sK\BN#3#9#8#0#01_$GHNGd!J?7IJ!K(B
$B#5!%#N#T#T$h$j%Q%=%3%s$NL5NAG[I[!J(BIBM$B@=!K(B
$B#6!%#F#A#X>pJs%\%C%/%9$,L5NA%l%s%?%k(B
$B#7!%#W#e#b#T#V!J%$%s%?!<%M%C%HC$K1~$8$F<+M3JQ49!J%f%K%l%Y%k!"%P%$%J%j!e$NG[J,$"$j!JG/6bE*%\!<%J%9!K(B
$B#5?M>R2p$G$J$s$HKh7n$N2qHq$,L5NA$G$9!*(B

$B2>EPO?$r$44uK>$5$l$k>l9g$O!"2<$NEPO??=$79~$_Ms$K(B
$BI,MW;v9`$r5-F~$N>e!"JVAw$7$F2<$5$$!#(B

$B!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~!~(B
$B2>EPO??=$79~$_Ms(B
---
$B!J%U%j%,%J!K!!(B
---
$B$*L>A0(B


---
$B!J%U%j%,%J!K(B
---
$B")(B  ($BI,$:(B7$B7eHV9f$r$45-F~$/$@$5$$(B)


$B$4=;=j(B


---
$BEEOCHV9f(B


---
FAX$BHV9f(B


---
$BEE;R%a!<%k%"%I%l%9(B

---





To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message