Re:Sound problem

[VINSON WAYNE HOWARD]

Hopefully I'm hiting the right thread here - This is in reply to the post
about excessively high loads caused by xmms.  I'm showing about 90% from
xmms as well.  However, I'm not sure it's real.  I'm not seeing much, if
any slowdown. Is top the tool I should be using to figure this out?

Possible causes:  I rebuild xmms and my kernel/world last night, and it
showed up.



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Re:Sound problem

[Kevin Lyons]

 about excessively high loads caused by xmms.  I'm showing about 90% from
 xmms as well.  However, I'm not sure it's real.  I'm not seeing much, if
 any slowdown. Is top the tool I should be using to figure this out?

 Possible causes:  I rebuild xmms and my kernel/world last night, and it
 showed up.

FYI,  I have seen top report 100% usage when zombie or stopped processes
were active yet a vmstat or uptime reports normal operation.  I would suspect
top.  



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Re:Sound problem

[VINSON WAYNE HOWARD]

Ok, I'll try to get a better handle on whether or not it's real.

On Sat, 29 Apr 2000, Kevin Lyons wrote:

  about excessively high loads caused by xmms.  I'm showing about 90% from
  xmms as well.  However, I'm not sure it's real.  I'm not seeing much, if
  any slowdown. Is top the tool I should be using to figure this out?
 
  Possible causes:  I rebuild xmms and my kernel/world last night, and it
  showed up.
 
 FYI,  I have seen top report 100% usage when zombie or stopped processes
 were active yet a vmstat or uptime reports normal operation.  I would suspect
 top.  
 
 
 
 To Unsubscribe: send mail to [EMAIL PROTECTED]
 with "unsubscribe freebsd-current" in the body of the message
 



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Re:Sound problem

[Nawfal M. Rouyan]

Hi,

 I am experiencing the same problem. I am using Avance
100+ but it is detected as Avance 110. Nevertheless,
the sound is working. Can anyone having Avance 100+
also check their sound card id. I checked the sbc.c
code and found out that the id is used for detecting
Avance 110.

 I am also experiencing problems of sound being lagged
for about 4-6 seconds while using Realplayer 7. During
4.0 current, the sound worked fine without any lagged
with the video.

thanks...

__
Do You Yahoo!?
Talk to your friends online and get email alerts with Yahoo! Messenger.
http://im.yahoo.com/


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message