Re: spec_getpages error in current kernel from last night
As Poul says.. first thing.. do a cvsup now and try a very modern kernel. if that fails we'll have some more things to try by then. (my workstation just croaked so I'm busy rerouting around the problem) julian On Fri, 3 Sep 1999, Rob Snow wrote: > basil# uname -a > FreeBSD basil.dympna.com 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Thu Sep 2 > 19:58:43 CDT 1999 > [EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current > i386 > > Last cvsup was 2:03 on Sept 2 > > dmesg output: (I've snipped out non-existent di's and left the stuff > from my mucking with density for my Exabyte 8505, several modes weren't > supported) > > rsnow@basil% dmesg > Copyright (c) 1992-1999 The FreeBSD Project. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights > reserved. > FreeBSD 4.0-CURRENT #0: Thu Sep 2 19:58:43 CDT 1999 > > [EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium Pro (686-class CPU) > Origin = "GenuineIntel" Id = 0x616 Stepping = 6 > > Features=0xfbff > real memory = 134217728 (131072K bytes) > > avail memory = 127070208 (124092K bytes) > Programming 24 pins in IOAPIC #0 > FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee0 > cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee0 > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec0 > Preloaded elf kernel "kernel" at 0xc02f1000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f109c. > Pentium Pro MTRR support enabled > npx0: on motherboard > npx0: INT 16 interface > pcib0: on motherboard > pci0: on pcib0 > isab0: at device 7.0 on pci0 > isa0: on isab0 > ide_pci0: at device 7.1 on pci0 > fxp0: irq 16 at device 12.0 on > pci0 > fxp0: Ethernet address 00:a0:c9:93:da:0c > ahc0: irq 17 at device 13.0 on pci0 > ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs > vga-pci0: irq 18 at > device 14.0 on pci0 > ahc1: irq 19 at device 15.0 on pci0 > ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs > fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 > wdc0 at port 0x1f0-0x1f7 irq 14 on isa0 > wdc0: unit 0 (wd0): > wd0: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S > atkbdc0: at port 0x60-0x6f on isa0 > atkbd0: irq 1 on atkbdc0 > vga0: at port 0x3b0-0x3df iomem 0xa-0xb on > isa0 > sc0: on isa0 > sc0: VGA <16 virtual consoles, flags=0x200> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > sio2: not probed (disabled) > sio3: not probed (disabled) > ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > plip0: on ppbus 0 > lpt0: on ppbus 0 > lpt0: Interrupt-driven port > ppi0: on ppbus 0 > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via pin 2 > Waiting 15 seconds for SCSI devices to settle > SMP: AP CPU #1 Launched! > sa0 at ahc0 bus 0 target 4 lun 0 > sa0: Removable Sequential Access SCSI-2 > device > sa0: 5.000MB/s transfers (5.000MHz, offset 11) > da0 at ahc0 bus 0 target 3 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing > Enabled > da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) > da1 at ahc1 bus 0 target 6 lun 0 > da1: Fixed Direct Access SCSI-2 device > da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing > Enabled > da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) > da2 at ahc1 bus 0 target 8 lun 0 > da2: Fixed Direct Access SCSI-2 device > da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing > Enabled > da2: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C) > changing root device to wd0s2a > vinum: loaded > vinum: reading configuration from /dev/da2s1e > vinum: updating configuration from /dev/da1s1e > (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 > (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 > (sa0:ahc0:0:4:0): Invalid field in parameter list > (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 > (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 > (sa0:ahc0:0:4:0): Invalid field in parameter list > (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 > (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 > (sa0:ahc0:0:4:0): Invalid field in parameter list > (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 > (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 > (sa0:ahc0:0:4:0): Invalid field in parameter list > (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 > (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 > (sa0:ahc0:0:4:0): Invalid field in parameter list > (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 > (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 > (sa0:ahc0:0:4:0): Invalid field in parameter list > (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 > (sa0:ahc0:0:4:0): ILLEGAL REQUEST a
Re: spec_getpages error in current kernel from last night
Julian just reverted some changes, try a fresh current... In message <[EMAIL PROTECTED]>, Rob Snow writes: >basil# uname -a >FreeBSD basil.dympna.com 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Thu Sep 2 >19:58:43 CDT 1999 >[EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current >i386 > >Last cvsup was 2:03 on Sept 2 > >dmesg output: (I've snipped out non-existent di's and left the stuff >from my mucking with density for my Exabyte 8505, several modes weren't >supported) > >rsnow@basil% dmesg >Copyright (c) 1992-1999 The FreeBSD Project. >Copyright (c) 1982, 1986, 1989, 1991, 1993 >The Regents of the University of California. All rights >reserved. >FreeBSD 4.0-CURRENT #0: Thu Sep 2 19:58:43 CDT 1999 > >[EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current >Timecounter "i8254" frequency 1193182 Hz >CPU: Pentium Pro (686-class CPU) > Origin = "GenuineIntel" Id = 0x616 Stepping = 6 > >Features=0xfbff >real memory = 134217728 (131072K bytes) > >avail memory = 127070208 (124092K bytes) >Programming 24 pins in IOAPIC #0 >FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee0 > cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee0 > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec0 >Preloaded elf kernel "kernel" at 0xc02f1000. >Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f109c. >Pentium Pro MTRR support enabled >npx0: on motherboard >npx0: INT 16 interface >pcib0: on motherboard >pci0: on pcib0 >isab0: at device 7.0 on pci0 >isa0: on isab0 >ide_pci0: at device 7.1 on pci0 >fxp0: irq 16 at device 12.0 on >pci0 >fxp0: Ethernet address 00:a0:c9:93:da:0c >ahc0: irq 17 at device 13.0 on pci0 >ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs >vga-pci0: irq 18 at >device 14.0 on pci0 >ahc1: irq 19 at device 15.0 on pci0 >ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs >fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 >wdc0 at port 0x1f0-0x1f7 irq 14 on isa0 >wdc0: unit 0 (wd0): >wd0: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S >atkbdc0: at port 0x60-0x6f on isa0 >atkbd0: irq 1 on atkbdc0 >vga0: at port 0x3b0-0x3df iomem 0xa-0xb on >isa0 >sc0: on isa0 >sc0: VGA <16 virtual consoles, flags=0x200> >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 16550A >sio1 at port 0x2f8-0x2ff irq 3 on isa0 >sio1: type 16550A >sio2: not probed (disabled) >sio3: not probed (disabled) >ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0 >ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >plip0: on ppbus 0 >lpt0: on ppbus 0 >lpt0: Interrupt-driven port >ppi0: on ppbus 0 >APIC_IO: Testing 8254 interrupt delivery >APIC_IO: routing 8254 via pin 2 >Waiting 15 seconds for SCSI devices to settle >SMP: AP CPU #1 Launched! >sa0 at ahc0 bus 0 target 4 lun 0 >sa0: Removable Sequential Access SCSI-2 >device >sa0: 5.000MB/s transfers (5.000MHz, offset 11) >da0 at ahc0 bus 0 target 3 lun 0 >da0: Fixed Direct Access SCSI-2 device >da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing >Enabled >da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) >da1 at ahc1 bus 0 target 6 lun 0 >da1: Fixed Direct Access SCSI-2 device >da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing >Enabled >da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) >da2 at ahc1 bus 0 target 8 lun 0 >da2: Fixed Direct Access SCSI-2 device >da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing >Enabled >da2: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C) >changing root device to wd0s2a >vinum: loaded >vinum: reading configuration from /dev/da2s1e >vinum: updating configuration from /dev/da1s1e >(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 >(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 >(sa0:ahc0:0:4:0): Invalid field in parameter list >(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 >(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 >(sa0:ahc0:0:4:0): Invalid field in parameter list >(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 >(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 >(sa0:ahc0:0:4:0): Invalid field in parameter list >(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 >(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 >(sa0:ahc0:0:4:0): Invalid field in parameter list >(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 >(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 >(sa0:ahc0:0:4:0): Invalid field in parameter list >(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 >(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 >(sa0:ahc0:0:4:0): Invalid field in parameter list >(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 >(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 >(sa0:ahc0:0:4:0): Invalid field in parameter list >spec_getpages: I/O read failure: (error code=0) bp 0xc44a3158 vp >0xc9e071c0 > size: 0, resid: 0, a_count: 803, valid: 0x0 > nread: 0, reqpage: 0, pindex: 0, pcount: 1 >vm_fau
Re: spec_getpages error in current kernel from last night
basil# uname -a FreeBSD basil.dympna.com 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Thu Sep 2 19:58:43 CDT 1999 [EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current i386 Last cvsup was 2:03 on Sept 2 dmesg output: (I've snipped out non-existent di's and left the stuff from my mucking with density for my Exabyte 8505, several modes weren't supported) rsnow@basil% dmesg Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Thu Sep 2 19:58:43 CDT 1999 [EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x616 Stepping = 6 Features=0xfbff real memory = 134217728 (131072K bytes) avail memory = 127070208 (124092K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee0 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee0 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec0 Preloaded elf kernel "kernel" at 0xc02f1000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f109c. Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 7.0 on pci0 isa0: on isab0 ide_pci0: at device 7.1 on pci0 fxp0: irq 16 at device 12.0 on pci0 fxp0: Ethernet address 00:a0:c9:93:da:0c ahc0: irq 17 at device 13.0 on pci0 ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs vga-pci0: irq 18 at device 14.0 on pci0 ahc1: irq 19 at device 15.0 on pci0 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 wdc0 at port 0x1f0-0x1f7 irq 14 on isa0 wdc0: unit 0 (wd0): wd0: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 vga0: at port 0x3b0-0x3df iomem 0xa-0xb on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus 0 lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! sa0 at ahc0 bus 0 target 4 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 11) da0 at ahc0 bus 0 target 3 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) da1 at ahc1 bus 0 target 6 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da2 at ahc1 bus 0 target 8 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C) changing root device to wd0s2a vinum: loaded vinum: reading configuration from /dev/da2s1e vinum: updating configuration from /dev/da1s1e (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 (sa0:ahc0:0:4:0): Invalid field in parameter list (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 (sa0:ahc0:0:4:0): Invalid field in parameter list (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 (sa0:ahc0:0:4:0): Invalid field in parameter list (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 (sa0:ahc0:0:4:0): Invalid field in parameter list (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 (sa0:ahc0:0:4:0): Invalid field in parameter list (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 (sa0:ahc0:0:4:0): Invalid field in parameter list (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0 (sa0:ahc0:0:4:0): Invalid field in parameter list spec_getpages: I/O read failure: (error code=0) bp 0xc44a3158 vp 0xc9e071c0 size: 0, resid: 0, a_count: 803, valid: 0x0 nread: 0, reqpage: 0, pindex: 0, pcount: 1 vm_fault: pager read error, pid 921 (cvsup) pid 921 (cvsup), uid 0: exited on signal 6 (core dumped) Poul-Henning Kamp wrote: > > can we have: > > uname -a, > time of last cvsup/ctm > and > dmesg output > > please
Re: spec_getpages error in current kernel from last night
can we have: uname -a, time of last cvsup/ctm and dmesg output please ? In message <[EMAIL PROTECTED]>, Rob Snow writes: >Just got this message while in cvsup: > >Sep 3 02:01:09 basil /kernel: spec_getpages: I/O read failure: (error >code=0) bp 0xc44a3158 vp 0xc9e071c0 >Sep 3 02:01:09 basil /kernel: size: 0, resid: 0, a_count: 803, valid: >0x0 >Sep 3 02:01:09 basil /kernel: nread: 0, reqpage: 0, pindex: 0, pcount: >1 >Sep 3 02:01:09 basil /kernel: vm_fault: pager read error, pid 921 >(cvsup) >Sep 3 02:01:09 basil /kernel: pid 921 (cvsup), uid 0: exited on signal >6 (core dumped) > >I'm guessing this is _bad_? > > >To Unsubscribe: send mail to [EMAIL PROTECTED] >with "unsubscribe freebsd-current" in the body of the message > -- Poul-Henning Kamp FreeBSD coreteam member [EMAIL PROTECTED] "Real hackers run -current on their laptop." FreeBSD -- It will take a long time before progress goes too far! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
spec_getpages error in current kernel from last night
Just got this message while in cvsup: Sep 3 02:01:09 basil /kernel: spec_getpages: I/O read failure: (error code=0) bp 0xc44a3158 vp 0xc9e071c0 Sep 3 02:01:09 basil /kernel: size: 0, resid: 0, a_count: 803, valid: 0x0 Sep 3 02:01:09 basil /kernel: nread: 0, reqpage: 0, pindex: 0, pcount: 1 Sep 3 02:01:09 basil /kernel: vm_fault: pager read error, pid 921 (cvsup) Sep 3 02:01:09 basil /kernel: pid 921 (cvsup), uid 0: exited on signal 6 (core dumped) I'm guessing this is _bad_? To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
