I have a Dell Latitude C Family Model:PPX laptop. I recently upgraded
from 4.4 to 5.0 so I could use the 32-bit Xircom ethernet adapter I had.
I cvsup'd rebuilt world and kernel yesterday and these are the problems
I am having.
1. If I let the acpi module load I don't have a /dev/psm* entry for the
mouse. I believe it complains about an inability to assign an IRQ.
2. I was using a 16-bit Linksys adapter while I was running on 4.4 this
adapter no longer works. It seems to recognize it and I can assign an
address to it but it was unable to actually route any traffic. This is
the message I get
/boot/kernel/kernel : arplookup xxx.xxx.xxx.xxx failed: host is not on
local network
/boot/kernel/kernel : arpresolve : can't allocate llinfo for
xxx.xxx.xxx.xxxrt
I have no idea on this one. Attatched is my kernel config file, a dmesg
with the acpi module loaded and boot -v specifed in the loader, as well
as a dmesg without the acpi and boot -v on the loader. If I can provide
any more info I'll be happy to.
Eric Liedtke
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Wed Nov 14 10:58:55 CST 2001
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/ROADKILL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0418000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04180b4.
Calibrating clock(s) ... TSC clock: 498437744 Hz, i8254 clock: 1193111 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 498471552 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0043f000 - 0x07fe7fff, 129667072 bytes (31657 pages)
avail memory = 126287872 (123328K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc0ce
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
lock order reversal
1st 0xc03633e0 allproc @ ../../../kern/kern_fork.c:343
2nd 0xc0326730 pool mutex @ ../../../kern/kern_sx.c:329
lock order reversal
1st 0xc0363360 proctree @ ../../../kern/kern_fork.c:573
2nd 0xc03266d0 pool mutex @ ../../../kern/kern_sx.c:329
lock order reversal
1st 0xc0325a00 fork list @ ../../../kern/kern_fork.c:646
2nd 0xc03271e0 pool mutex @ ../../../kern/kern_sx.c:204
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000008
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 6 entries at 0xc00fbd70
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
Timecounter "ACPI" frequency 3579545 Hz
can't fetch resources for \\_SB_.MB1_ - AE_AML_OPERAND_TYPE
can't fetch resources for \\_SB_.PCI0 - AE_AML_OPERAND_TYPE
can't fetch resources for \\_SB_.PCI0.PX40.FDC0 - AE_AML_OPERAND_TYPE
can't fetch resources for \\_SB_.PCI0.PX40.UAR1 - AE_AML_OPERAND_TYPE
can't fetch resources for \\_SB_.PCI0.PX40.ECP_ - AE_AML_OPERAND_TYPE
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu: CLK_VAL field overflows P_CNT register
acpi_cpu: CLK_VAL field overlaps THT_EN bit
acpi_tz0: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base f4000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=3, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=3, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 00000860, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000dce0, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
map[90]: type 4, range 32, base 00000840, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000d800, size 8, enabled
found-> vendor=0x125d, dev=0x1978, revid=0x10
bus=0, slot=8, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfc000000-0xfeffffff
pcib1: prefetched decode 0xf9000000-0xf9ffffff
pci1: physical bus=1
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 4, range 32, base 0000ec00, size 8, enabled
map[18]: type 1, range 32, base fcfff000, size 12, enabled
found-> vendor=0x1002, dev=0x4c4d, revid=0x64
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pccbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0
pccbb0: PCI Memory allocated: 10000000
acpi_pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.LNKD)
acpi_pcib0: device is routed to IRQ 11
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0
pccbb1: PCI Memory allocated: 10001000
acpi_pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.LNKD)
acpi_pcib0: device is routed to IRQ 11
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0860
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe 00 00
ata0-master: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0868
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 07 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
acpi_timer0: functional ACPI timer detected, enabling fast timecount interface
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
fdc0: cannot reserve I/O port range (1 ports)
unknown: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x378-0x37f on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: cannot reserve I/O port range (1 ports)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
atkbdc-: atkbdc0 already exists, skipping it
ppc-: ppc0 already exists, skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x881 0x891 0x881 0x881
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x881 0x881 0x881 0x881
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 06 40 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 06 40 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
bpf: lo0 attached
acpi_acad0: On Line
acpi_cmbat0: Battery info corrupted
acpi_cmbat1: Battery info corrupted
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DARA-212000/AR4OA54A> ATA-4 disk at ata0-master
ad0: 11513MB (23579136 sectors), 23392 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <SAMSUNG CD-ROM SN-124/S004> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 23567354, size 23567292 : OK
pccbb0: card inserted: event=0x00000000, state=30000410
pccard0: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is mem
pccard0: read_cis
pccbb_pcic_mem_map window 0 bus 10002000+400+efffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 10 (10002000+00000400.00001000*efffe000)
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000)
cis mem map c98bc000
pccard0: CIS tuple chain:
CISTPL_DEVICE type=funcspec speed=100ns
01 03 d4 0a ff
CISTPL_DEVICE_A type=eeprom speed=250ns
17 03 41 00 ff
CISTPL_MANFID
20 04 49 01 ab c1
CISTPL_VERS_1
15 39 04 01 4c 69 6e 6b 73 79 73 00 45 74 68 65
72 46 61 73 74 20 31 30 2f 31 30 30 20 50 43 20
43 61 72 64 20 28 50 43 4d 50 43 31 30 30 20 56
32 29 00 56 32 2e 30 00 20 00 ff
CISTPL_CONFIG
1a 05 01 20 00 04 01
CISTPL_CFTABLE_ENTRY
1b 07 d0 81 18 45 30 fc be
CISTPL_CFTABLE_ENTRY
1b 07 01 08 ca 60 00 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 02 08 ca 60 20 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 03 08 ca 60 40 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 04 08 ca 60 80 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 05 08 ca 60 00 02 1f
CISTPL_CFTABLE_ENTRY
1b 07 06 08 ca 60 20 02 1f
CISTPL_CFTABLE_ENTRY
1b 07 07 08 ca 60 40 02 1f
CISTPL_FUNCID
21 02 06 00
CISTPL_NO_LINK
14 00
CISTPL_END
ff
pccard0: check_cis_quirks
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Linksys, EtherFast 10/100 PC Card (PCMPC100 V2), V2.0,
pccard0: Manufacturer code 0x149, product 0xc1ab
pccard0: function 0: network adapter, ccr addr 400 mask 1
pccard0: function 0, config table entry 16: I/O card; irq mask befc; iomask 5, iospace
0-1f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace
300-31f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace
320-33f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace
340-35f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace
380-39f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 5: I/O card; irq mask befc; iomask a, iospace
200-21f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 6: I/O card; irq mask befc; iomask a, iospace
220-23f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 7: I/O card; irq mask befc; iomask a, iospace
240-25f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: functions scanning
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is io
pccbb_pcic_mem_map window 0 bus 10002000+400+efffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 10 (10002000+00000400.00001000*efffe000)
pccard0: ccr_res == 10002000-100023ff, base=400
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000)
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000)
pccard0: function 0 CCR at 0 offset 400: 50 0 ff 0, 17 3 41 0, ff
pccbb_pcic_io_map window 0 auto port 100+20
pccbb_pcic_do_io_map window 0: 0100 011f (00000100+00000020)
awi0: awi_pccard_probe: bad banner: 42 42 42 42 42 42 42 42 42 42 42 42
ed1: <Planex FNW-3600-T> at port 0x100-0x11f irq 11 function 0 config 16 on pccard0
pccbb_pcic_io_map window 0 auto port 100+20
pccbb_pcic_do_io_map window 0: 0100 011f (00000100+00000020)
pccbb_pcic_io_map window 0 auto port 100+20
pccbb_pcic_do_io_map window 0: 0100 011f (00000100+00000020)
bpf: ed1 attached
ed1: address 01:d4:ff:03:00:20, type NE2000 (16 bit)
pccard0: function 0 CCR at 0 offset 400: 54 0 ff 0, 17 3 41 0, ff
pccbb1: card inserted: event=0x00000000, state=30000820
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb1: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
found-> vendor=0x115d, dev=0x0003, revid=0x03
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=128
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 5.0
Product name: Xircom | CardBus Ethernet II 10/100 | CBEII-10/100 | 1.03 |
TUPLE: Unknown(0x88) [4]: 90 c8 d1 00
TUPLE: Unknown(0x8a) [12]: 39 30 30 34 37 43 44 31 43 38 39 30
TUPLE: Unknown(0x8b) [4]: 00 00 00 00
Manufacturer ID: 0501030181
TUPLE: DATE [4]: b4 68 96 28
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060010a4d1c890
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
TUPLE: DEVICE_OC [4]: 02 4f 02 ff
cardbus1: Opening BAR: type=IO, bar=10, len=0080
cardbus1: Opening BAR: type=MEM, bar=14, len=0080
cardbus1: Opening BAR: type=MEM, bar=18, len=0100
cardbus1: Invalid BAR number: 27(06)
TUPLE: CONFIG_CB [7]: 03 02 03 01 00 00 ff
TUPLE: CFTABLE_ENTRY_CB [8]: 41 b0 b0 bc 8e 0e fb 04
TUPLE: CFTABLE_ENTRY_CB [9]: 02 b8 02 b0 bc 8e 1c fb 04
TUPLE: NO_LINK [0]:
CIS reading done
cardbus1: Non-prefetchable memory at 44000000-4400017f
cardbus1: Non-prefetchable memory rid=18 at 44000000-440000ff (100)
cardbus1: Non-prefetchable memory rid=14 at 44000100-4400017f (80)
cardbus1: IO port at 1000-107f
cardbus1: IO port rid=10 at 1000-107f
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
0x44000000-0x440000ff,0x44000100-0x4400017f irq 11 at device 0.0 on cardbus1
dc0: Ethernet address: 02:06:00:22:08:04
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: OUI 0x00c039, model 0x0014, rev. 10
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
start_init: trying /sbin/init
lock order reversal
1st 0xc87efd0c process lock @ ../../../kern/kern_proc.c:206
2nd 0xc0326730 pool mutex @ ../../../kern/kern_sx.c:204
acpi_acad0: On Line
acpi_acad0: On Line
acpi_cmbat0: Battery status corrupted
acpi_cmbat1: Battery status corrupted
acpi_cmbat0: Battery status corrupted
acpi_cmbat1: Battery status corrupted
acpi_cmbat0: Battery status corrupted
acpi_cmbat1: Battery status corrupted
acpi_cmbat0: Battery status corrupted
acpi_cmbat1: Battery status corrupted
acpi_cmbat0: Battery status corrupted
acpi_cmbat1: Battery status corrupted
acpi_cmbat0: Battery status corrupted
acpi_cmbat1: Battery status corrupted
cstsevent occures, 0x30000868
acpi_acad0: On Line
acpi_cmbat0: Battery status corrupted
acpi_cmbat1: Battery status corrupted
acpi_acad0: On Line
acpi_acad0: On Line
KLD fire_saver.ko: depends on splash - not available
link_elf: symbol gd_curproc undefined
link_elf: symbol lminor undefined
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Wed Nov 14 10:58:55 CST 2001
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/ROADKILL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03d5000.
Calibrating clock(s) ... TSC clock: 498440117 Hz, i8254 clock: 1193116 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 498471137 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003fc000 - 0x07fe7fff, 129941504 bytes (31724 pages)
avail memory = 126570496 (123604K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc0ce
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
lock order reversal
1st 0xc03633e0 allproc @ ../../../kern/kern_fork.c:343
2nd 0xc0326730 pool mutex @ ../../../kern/kern_sx.c:329
lock order reversal
1st 0xc0363360 proctree @ ../../../kern/kern_fork.c:573
2nd 0xc03266d0 pool mutex @ ../../../kern/kern_sx.c:329
lock order reversal
1st 0xc0325a00 fork list @ ../../../kern/kern_fork.c:646
2nd 0xc03271e0 pool mutex @ ../../../kern/kern_sx.c:204
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000008
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 6 entries at 0xc00fbd70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base f4000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=3, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x104c, dev=0xac1c, revid=0x01
bus=0, slot=3, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 00000860, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000dce0, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=11
map[90]: type 4, range 32, base 00000840, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000d800, size 8, enabled
found-> vendor=0x125d, dev=0x1978, revid=0x10
bus=0, slot=8, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfc000000-0xfeffffff
pcib1: prefetched decode 0xf9000000-0xf9ffffff
pci1: physical bus=1
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 4, range 32, base 0000ec00, size 8, enabled
map[18]: type 1, range 32, base fcfff000, size 12, enabled
found-> vendor=0x1002, dev=0x4c4d, revid=0x64
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pccbb0: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pccbb0: PCI Memory allocated: 10000000
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pccbb1: PCI Memory allocated: 10001000
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0860
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe 00 00
ata0-master: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0868
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 07 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
ata-: ata0 already exists, skipping it
ata-: ata1 already exists, skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 15 devices, largest 248 bytes
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x2
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100a0000-0x100fffff, size=0x60000
PNP0c01: adding io range 0x800-0x83f, size=0x40, align=0x1
PNP0c01: adding io range 0x840-0x84f, size=0x10, align=0x1
PNP0c01: adding io range 0x880-0x88f, size=0x10, align=0x1
PNP0c01: adding io range 0x3f0-0x3f1, size=0x2, align=0x1
PNP0c01: adding io range 0xe0-0xe1, size=0x2, align=0x1
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0xed000000-0xedffffff, size=0x1000000
PNP0c01: adding io range 0xf400-0xf4fe, size=0xff, align=0x1
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x3f, size=0x20, align=0x1
PNP0000: adding io range 0xa0-0xbf, size=0x20, align=0x1
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1
PNP0200: adding io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 5 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 7 device ID PNP0f13 (130fd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 10 device ID PNP0c04 (040cd041)
PNP0e03: adding irq mask 0x20
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
pnpbios: handle 11 device ID PNP0e03 (030ed041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77b, size=0x4, align=0x8
pnpbios: handle 14 device ID PNP0401 (0104d041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x2
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x8
PNP0700: adding dma mask 0x4
pnpbios: handle 15 device ID PNP0700 (0007d041)
sc-: sc0 already exists, skipping it
vga-: vga0 already exists, skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x241 0x251 0x241 0x241
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x241 0x241 0x241 0x241
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 05 f0 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 05 f0 91 87 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources
unknown: <PNP0c01> at port 0x800-0x83f,0x840-0x84f,0x880-0x88f,0x3f0-0x3f1 iomem
0-0x9ffff,0x100000-0x7ffffff,0xf0000-0xfffff,0xfffe0000-0xffffffff,0x100a0000-0x100fffff
on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 irq 5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DARA-212000/AR4OA54A> ATA-4 disk at ata0-master
ad0: 11513MB (23579136 sectors), 23392 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <SAMSUNG CD-ROM SN-124/S004> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 23567354, size 23567292 : OK
pccbb0: card inserted: event=0x00000000, state=30000410
pccard0: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is mem
pccard0: read_cis
pccbb_pcic_mem_map window 0 bus 10002000+400+efffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 10 (10002000+00000400.00001000*efffe000)
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000)
cis mem map c94db000
pccard0: CIS tuple chain:
CISTPL_DEVICE type=funcspec speed=100ns
01 03 d4 0a ff
CISTPL_DEVICE_A type=eeprom speed=250ns
17 03 41 00 ff
CISTPL_MANFID
20 04 49 01 ab c1
CISTPL_VERS_1
15 39 04 01 4c 69 6e 6b 73 79 73 00 45 74 68 65
72 46 61 73 74 20 31 30 2f 31 30 30 20 50 43 20
43 61 72 64 20 28 50 43 4d 50 43 31 30 30 20 56
32 29 00 56 32 2e 30 00 20 00 ff
CISTPL_CONFIG
1a 05 01 20 00 04 01
CISTPL_CFTABLE_ENTRY
1b 07 d0 81 18 45 30 fc be
CISTPL_CFTABLE_ENTRY
1b 07 01 08 ca 60 00 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 02 08 ca 60 20 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 03 08 ca 60 40 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 04 08 ca 60 80 03 1f
CISTPL_CFTABLE_ENTRY
1b 07 05 08 ca 60 00 02 1f
CISTPL_CFTABLE_ENTRY
1b 07 06 08 ca 60 20 02 1f
CISTPL_CFTABLE_ENTRY
1b 07 07 08 ca 60 40 02 1f
CISTPL_FUNCID
21 02 06 00
CISTPL_NO_LINK
14 00
CISTPL_END
ff
pccard0: check_cis_quirks
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: Linksys, EtherFast 10/100 PC Card (PCMPC100 V2), V2.0,
pccard0: Manufacturer code 0x149, product 0xc1ab
pccard0: function 0: network adapter, ccr addr 400 mask 1
pccard0: function 0, config table entry 16: I/O card; irq mask befc; iomask 5, iospace
0-1f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 1: I/O card; irq mask befc; iomask a, iospace
300-31f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 2: I/O card; irq mask befc; iomask a, iospace
320-33f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask befc; iomask a, iospace
340-35f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 4: I/O card; irq mask befc; iomask a, iospace
380-39f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 5: I/O card; irq mask befc; iomask a, iospace
200-21f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 6: I/O card; irq mask befc; iomask a, iospace
220-23f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: function 0, config table entry 7: I/O card; irq mask befc; iomask a, iospace
240-25f; mwait_required rdybsy_active wp_active bvd_active io16 irqlevel
pccard0: functions scanning
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is io
pccbb_pcic_mem_map window 0 bus 10002000+400+efffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 10 (10002000+00000400.00001000*efffe000)
pccard0: ccr_res == 10002000-100023ff, base=400
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000)
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 10 (10002000+00000400.00001000*efffe000)
pccard0: function 0 CCR at 0 offset 400: 50 0 ff 0, 17 3 41 0, ff
pccbb_pcic_io_map window 0 auto port 100+20
pccbb_pcic_do_io_map window 0: 0100 011f (00000100+00000020)
awi0: awi_pccard_probe: bad banner: 42 42 42 42 42 42 42 42 42 42 42 42
ed1: <Planex FNW-3600-T> at port 0x100-0x11f irq 11 function 0 config 16 on pccard0
pccbb_pcic_io_map window 0 auto port 100+20
pccbb_pcic_do_io_map window 0: 0100 011f (00000100+00000020)
pccbb_pcic_io_map window 0 auto port 100+20
pccbb_pcic_do_io_map window 0: 0100 011f (00000100+00000020)
bpf: ed1 attached
ed1: address 01:d4:ff:03:00:20, type NE2000 (16 bit)
pccard0: function 0 CCR at 0 offset 400: 54 0 ff 0, 17 3 41 0, ff
pccbb1: card inserted: event=0x00000000, state=30000820
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb1: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
found-> vendor=0x115d, dev=0x0003, revid=0x03
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=0
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 5.0
Product name: Xircom | CardBus Ethernet II 10/100 | CBEII-10/100 | 1.03 |
TUPLE: Unknown(0x88) [4]: 90 c8 d1 00
TUPLE: Unknown(0x8a) [12]: 39 30 30 34 37 43 44 31 43 38 39 30
TUPLE: Unknown(0x8b) [4]: 00 00 00 00
Manufacturer ID: 0501030181
TUPLE: DATE [4]: b4 68 96 28
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060010a4d1c890
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
TUPLE: DEVICE_OC [4]: 02 4f 02 ff
cardbus1: Opening BAR: type=IO, bar=10, len=0080
cardbus1: Opening BAR: type=MEM, bar=14, len=0080
cardbus1: Opening BAR: type=MEM, bar=18, len=0100
cardbus1: Invalid BAR number: 27(06)
TUPLE: CONFIG_CB [7]: 03 02 03 01 00 00 ff
TUPLE: CFTABLE_ENTRY_CB [8]: 41 b0 b0 bc 8e 0e fb 04
TUPLE: CFTABLE_ENTRY_CB [9]: 02 b8 02 b0 bc 8e 1c fb 04
TUPLE: NO_LINK [0]:
CIS reading done
cardbus1: Non-prefetchable memory at 44000000-4400017f
cardbus1: Non-prefetchable memory rid=18 at 44000000-440000ff (100)
cardbus1: Non-prefetchable memory rid=14 at 44000100-4400017f (80)
cardbus1: IO port at 1000-107f
cardbus1: IO port rid=10 at 1000-107f
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
0x44000000-0x440000ff,0x44000100-0x4400017f irq 11 at device 0.0 on cardbus1
dc0: Ethernet address: 02:06:00:22:08:04
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: OUI 0x00c039, model 0x0014, rev. 10
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
start_init: trying /sbin/init
lock order reversal
1st 0xc840cd0c process lock @ ../../../kern/kern_proc.c:206
2nd 0xc0326730 pool mutex @ ../../../kern/kern_sx.c:204
cstsevent occures, 0x30000868
KLD fire_saver.ko: depends on splash - not available
link_elf: symbol gd_curproc undefined
link_elf: symbol lminor undefined
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.323 2001/10/16 22:22:58 mjacob Exp $
machine i386
cpu I686_CPU
ident ROADKILL
maxusers 64
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
#options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# Debugging for use in -current
options DDB #Enable the kernel debugger
options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures,
required by INVARIANTS
options WITNESS #Enable mutex checks to detects deadlocks and
cycles
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc 1 # At keyboard controller
device atkbd # at keyboard
device psm # psm mouse
device vga # VGA screen
# splash screen/screen saver
#device splash
# syscons is the default console driver, resembling an SCO console
device sc 1
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
device pccbb
device pccard # pccard bus
device cardbus # PCMCIA bridge
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
# Wireless NIC cards
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/IEEE 802.11 wireless NICs.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp 1 # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
