A dmesg from it is as follows - note that the old PCM code used to find it.
The voxware stuff needs a couple of delays inserted to find it.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Thu Sep 2 19:25:14 WST 1999
[EMAIL PROTECTED]:/usr/src/sys/compile/bloop
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 416530931 Hz
CPU: AMD-K6(tm) 3D processor (416.53-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
AMD Features=0x8800SYSCALL,3DNow!
real memory = 67043328 (65472K bytes)
avail memory = 62074880 (60620K bytes)
Preloaded elf kernel "kernel" at 0xc02da000.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc028d642 (122)
VESA: NVidia
K6-family MTRR support enabled (2 registers)
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: VIA 82C598MVP (Apollo MVP3) host bridge on motherboard
pci0: PCI bus on pcib0
pcib1: VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge at device 1.0 on pci0
pci1: PCI bus on pcib1
vga-pci0: NVidia model 0029 graphics accelerator irq 11 at device 0.0 on pci1
isab0: VIA 82C586 PCI-ISA bridge at device 7.0 on pci0
isa0: ISA bus on isab0
ata-pci0: Unknown PCI IDE controller (using generic mode) at device 7.1 on
pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
uhci0: VIA 83C572 USB controller irq 10 at device 7.2 on pci0
usb0: VIA 83C572 USB controller on uhci0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 error, restarting
uhub0: port 2 error, restarting
rl0: RealTek 8139 10/100BaseTX irq 12 at device 9.0 on pci0
rl0: Ethernet address: 00:00:e8:53:a2:3e
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: unknown card DPZ0001 (vendor=0x121a, dev=0x0001) at 11.0
atkbdc0: keyboard controller (i8042) at port 0x60-0x6f on isa0
atkbd0: AT Keyboard irq 1 on atkbdc0
vga0: Generic ISA VGA at port 0x3b0-0x3df iomem 0xa-0xb on isa0
sc0: System console on isa0
sc0: VGA 16 virtual consoles, flags=0x200
fdc0: NEC 72065B or clone at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1440-KB 3.5" drive on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
joy0 at port 0x201 on isa0
joy0: joystick
unknown0: CTRL on isa0
unknown1: WSS/SB at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0
on isa0
unknown2: GAME at port 0x208-0x20f on isa0
unknown3: MPU at port 0x330-0x331 irq 9 on isa0
ds0 XXX: driver didn't set ifq_maxlen
ata0: master: setting up generic WDMA2 mode OK
ad0: Maxtor 90648D3/GAS54112 ATA-4 disk at ata0 as master
ad0: 6179MB (12656448 sectors), 12556 cyls, 16 heads, 63 S/T, 512 B/S
ad0: piomode=4, dmamode=2, udmamode=2
ad0: 16 secs/int, 0 depth queue, DMA mode
changing root device to wd0s4a
The voxware dmesg is as follows - I needed to have some of the debug
statements enabled to reliably detect the card, which argues a timing problem
somewhere.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Thu Sep 2 19:39:03 WST 1999
[EMAIL PROTECTED]:/usr/src/sys/compile/bloop
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 416530661 Hz
CPU: AMD-K6(tm) 3D processor (416.53-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
AMD Features=0x8800SYSCALL,3DNow!
real memory = 67043328 (65472K bytes)
avail memory = 62033920 (60580K bytes)
Preloaded elf kernel "kernel" at 0xc02e4000.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0297222 (122)
VESA: NVidia
K6-family MTRR support enabled (2 registers)
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: VIA 82C598MVP (Apollo MVP3) host bridge on motherboard
pci0: PCI bus on pcib0
pcib1: VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge at device 1.0 on pci0
pci1: PCI bus on pcib1
vga-pci0: NVidia model 0029 graphics accelerator irq 11 at device 0.0 on pci1
isab0: VIA 82C586 PCI-ISA bridge at device 7.0 on pci0
isa0: ISA bus on isab0
ata-pci0: Unknown PCI IDE controller (using generic mode) at device 7.1 on
pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
uhci0: VIA 83C572 USB controller irq 10 at device 7.2 on pci0
usb0: VIA 83C572 USB controller on uhci0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 error, restarting
uhub0: port 2 error, restarting
rl0: RealTek 8139 10/100BaseTX irq 12 at device 9.0 on pci0
rl0: