Re: How to debug ppp
It still doesn't work sometimes. I have a complete log (From dialing to hangup) at http://www.neland.dk/arnold.log My ppp.conf is at http://www.neland.dk/arnold.conf Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: LayerStart Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: State change Stopped -- Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: RecvConfigReq(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: SendConfigAck(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) - Original Message - From: "Brian Somers" [EMAIL PROTECTED] To: "Leif Neland" [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, November 29, 2000 2:10 AM Subject: Re: How to debug ppp Well, I haven't seen this before !!! Your ISP is *insisting* that you negotiate a multi-link connection. You can do this by simply adding set mrru 1506 to your config. I sometimes have trouble connecting to my flat-rate isp via i4bsd. Most of the time it works, but sometimes the handshake fails. What is the log trying to tell me here? What can I tell my isp? When it fails, I can connect to another isp, which charges per minute charges, which I rather not use when I have flat rate. Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: x Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected! Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening - dial Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Dial attempt 1 of 2 Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: dial - carrier Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: /dev/i4brbch0: CD detected Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: carrier - login Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: login - lcp Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: FSM: Using "1" as a transport Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Initial -- Closed Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: Entering STOPPED state for 2 s econds Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Closed -- Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x0bde8bbc Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: LayerStart Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Stopped -- Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(2) state = Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(2) state = Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Looping: Nov 27 20:48:38 arnold ppp[7461]:
Re: How to debug ppp
What happens if you ``disable acfcomp protocomp'' and ``deny acfcomp protocomp'' in your config ? This should be negotiable with isdn but perhaps our requesting it is upsetting the peer ? It still doesn't work sometimes. I have a complete log (From dialing to hangup) at http://www.neland.dk/arnold.log My ppp.conf is at http://www.neland.dk/arnold.conf Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: LayerStart Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: State change Stopped -- Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: RecvConfigReq(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: SendConfigAck(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) - Original Message - From: "Brian Somers" [EMAIL PROTECTED] To: "Leif Neland" [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, November 29, 2000 2:10 AM Subject: Re: How to debug ppp Well, I haven't seen this before !!! Your ISP is *insisting* that you negotiate a multi-link connection. You can do this by simply adding set mrru 1506 to your config. I sometimes have trouble connecting to my flat-rate isp via i4bsd. Most of the time it works, but sometimes the handshake fails. What is the log trying to tell me here? What can I tell my isp? When it fails, I can connect to another isp, which charges per minute charges, which I rather not use when I have flat rate. Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: x Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected! Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening - dial Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Dial attempt 1 of 2 Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: dial - carrier Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: /dev/i4brbch0: CD detected Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: carrier - login Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: login - lcp Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: FSM: Using "1" as a transport Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Initial -- Closed Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: Entering STOPPED state for 2 s econds Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Closed -- Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x0bde8bbc Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: LayerStart Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Stopped -- Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(2) state = Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:37 arnold ppp[7
Re: How to debug ppp
[4] 0xc023 (PAP) Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MAGICNUM[6] 0x01e25945 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: PROTOCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: ACFCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MRRU[4] 1506 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: 1: SendConfigRej(10) state = Req-Sent Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: PROTOCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: ACFCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: 1: SendConfigReq(1) state = Req-Sent Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MRU[4] 1500 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MAGICNUM[6] 0xc23c4361 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MRRU[4] 1506 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: SHORTSEQ[2] Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Carrier lost Dec 6 00:21:40 arnold ppp[56941]: tun0: LCP: 1: State change Req-Sent -- Starting Dec 6 00:21:40 arnold ppp[56941]: tun0: LCP: 1: LayerFinish Dec 6 00:21:40 arnold ppp[56941]: tun0: LCP: 1: State change Starting -- Initial Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Disconnected! Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: lcp - logout Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Disconnected! Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: logout - hangup Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Connect time: 16 secs: 351 octets in, 228 octets out Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: : 19 packets in, 29 packets out Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: total 36 bytes/sec, peak 50 bytes/sec on Wed Dec 6 00:21:40 2000 Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: hangup - closed Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: bundle: Dead - Original Message - From: "Brian Somers" [EMAIL PROTECTED] To: "Leif Neland" [EMAIL PROTECTED] Cc: "Brian Somers" [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, December 05, 2000 11:40 PM Subject: Re: How to debug ppp What happens if you ``disable acfcomp protocomp'' and ``deny acfcomp protocomp'' in your config ? This should be negotiable with isdn but perhaps our requesting it is upsetting the peer ? It still doesn't work sometimes. I have a complete log (From dialing to hangup) at http://www.neland.dk/arnold.log My ppp.conf is at http://www.neland.dk/arnold.conf Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: LayerStart Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: State change Stopped -- Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: RecvConfigReq(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: SendConfigAck(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) - Original Message - From: "Brian Somers" [EMAIL PROTECTED] To: "Leif Neland" [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, November 29, 2000 2:10 AM Subject: Re: How to debug ppp Well, I haven't seen this before !!! Your ISP is *insisting* that you negotiate a multi-link connection. You can do this by simply adding set mrru 1506 to your config. I sometimes have trouble connecting to my flat-rate isp via i4bsd. Most of the time it works, but sometimes the handshake fails. What is the log trying to tell me here? What can I tell my isp? When it fails, I can connect to another isp, which charges per minute charges, which I rather not use when I have flat rate. Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: x Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected! Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening - dial Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Di
Re: How to debug ppp
:36 arnold ppp[56941]: tun0: LCP: MRRU[4] 1506 Dec 6 00:21:36 arnold ppp[56941]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 6 00:21:36 arnold ppp[56941]: tun0: LCP: 1: SendConfigRej(9) state = Req-Sent Dec 6 00:21:36 arnold ppp[56941]: tun0: LCP: PROTOCOMP[2] Dec 6 00:21:36 arnold ppp[56941]: tun0: LCP: ACFCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: 1: RecvConfigReq(10) state = Req-Sent Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MRU[4] 1500 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MAGICNUM[6] 0x01e25945 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: PROTOCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: ACFCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MRRU[4] 1506 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: 1: SendConfigRej(10) state = Req-Sent Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: PROTOCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: ACFCOMP[2] Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: 1: SendConfigReq(1) state = Req-Sent Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MRU[4] 1500 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MAGICNUM[6] 0xc23c4361 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: MRRU[4] 1506 Dec 6 00:21:38 arnold ppp[56941]: tun0: LCP: SHORTSEQ[2] Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Carrier lost Dec 6 00:21:40 arnold ppp[56941]: tun0: LCP: 1: State change Req-Sent -- Starting Dec 6 00:21:40 arnold ppp[56941]: tun0: LCP: 1: LayerFinish Dec 6 00:21:40 arnold ppp[56941]: tun0: LCP: 1: State change Starting -- Initial Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Disconnected! Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: lcp - logout Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Disconnected! Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: logout - hangup Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: Connect time: 16 secs: 351 octets in, 228 octets out Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: : 19 packets in, 29 packets out Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: total 36 bytes/sec, peak 50 bytes/sec on Wed Dec 6 00:21:40 2000 Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: 1: hangup - closed Dec 6 00:21:40 arnold ppp[56941]: tun0: Phase: bundle: Dead - Original Message - From: "Brian Somers" [EMAIL PROTECTED] To: "Leif Neland" [EMAIL PROTECTED] Cc: "Brian Somers" [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, December 05, 2000 11:40 PM Subject: Re: How to debug ppp What happens if you ``disable acfcomp protocomp'' and ``deny acfcomp protocomp'' in your config ? This should be negotiable with isdn but perhaps our requesting it is upsetting the peer ? It still doesn't work sometimes. I have a complete log (From dialing to hangup) at http://www.neland.dk/arnold.log My ppp.conf is at http://www.neland.dk/arnold.conf Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: LayerStart Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: State change Stopped -- Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: RecvConfigReq(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: SendConfigAck(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) - Original Message - From: "Brian Somers" [EMAIL PROTECTED] To: "Leif Neland" [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, November 29, 2000 2:10 AM Subject: Re: How to debug ppp Well, I haven't seen this before !!! Your ISP is *insisting* that you negotiate a multi-link connection. You can do this by simply adding set
Re: How to debug ppp
Well, I haven't seen this before !!! Your ISP is *insisting* that you negotiate a multi-link connection. You can do this by simply adding set mrru 1506 to your config. I sometimes have trouble connecting to my flat-rate isp via i4bsd. Most of the time it works, but sometimes the handshake fails. What is the log trying to tell me here? What can I tell my isp? When it fails, I can connect to another isp, which charges per minute charges, which I rather not use when I have flat rate. Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: x Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected! Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening - dial Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Dial attempt 1 of 2 Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: dial - carrier Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: /dev/i4brbch0: CD detected Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: carrier - login Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: login - lcp Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: FSM: Using "1" as a transport Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Initial -- Closed Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: Entering STOPPED state for 2 s econds Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Closed -- Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x0bde8bbc Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: LayerStart Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Stopped -- Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(2) state = Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(2) state = Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Looping: Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(3) state = Req-Sent Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(3) state = Req-Sent Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Until hangup Leif -- Brian [EMAIL PROTECTED]brian@[uk.]FreeBSD.org http://www.Awfulhak.org brian@[uk.]OpenBSD.org Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: How to debug ppp
On Wed, 29 Nov 2000, Brian Somers wrote: Well, I haven't seen this before !!! Your ISP is *insisting* that you negotiate a multi-link connection. You can do this by simply adding set mrru 1506 to your config. Strange, since my subscription is single channel flat rate isdn... I'll try it. Leif To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
How to debug ppp
I sometimes have trouble connecting to my flat-rate isp via i4bsd. Most of the time it works, but sometimes the handshake fails. What is the log trying to tell me here? What can I tell my isp? When it fails, I can connect to another isp, which charges per minute charges, which I rather not use when I have flat rate. Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: x Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected! Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening - dial Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Dial attempt 1 of 2 Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: dial - carrier Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: /dev/i4brbch0: CD detected Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: carrier - login Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: login - lcp Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: FSM: Using "1" as a transport Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Initial -- Closed Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: Entering STOPPED state for 2 s econds Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Closed -- Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigReq(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x0bde8bbc Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(1) state = Stopped Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: LayerStart Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Stopped -- Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(2) state = Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(2) state = Req-Sent Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Looping: Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(3) state = Req-Sent Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(3) state = Req-Sent Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 Until hangup Leif To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
