Dear all,
Does anyone have tested whether this card works with
current 5.0 NEWCARD? I tried it on a Thinkpad 600X
with current 5.0 cvsupped yestersday and received a
kernel: pccbb0: card inserted: event=0x,
state=3920
kernel: pccbb0: pccbb_power: CARD_VCC_0V and
CARD_VPP_0V [44]
Shizuka == Shizuka Kudo [EMAIL PROTECTED] writes:
Shizuka Does anyone have tested whether this card works with current 5.0
Shizuka NEWCARD?
I already tested it on NEWCARD.
Melco LPC4-CLX-CB is using Realtek's chip.
So, we need to add vendor/device ID to rl driver if we want to use Melco
At Tue, 15 Jan 2002 03:08:53 -0800 (PST),
Shizuka Kudo wrote:
Dear all,
Does anyone have tested whether this card works with
current 5.0 NEWCARD? I tried it on a Thinkpad 600X
with current 5.0 cvsupped yestersday and received a
kernel: found-vendor=0x10ec, dev=0x8138,
In message: [EMAIL PROTECTED]
Shizuka Kudo [EMAIL PROTECTED] writes:
: kernel: found-vendor=0x10ec, dev=0x8138, revid=0x10
...
: kernel: cardbus0: unknown card (vendor=0x10ec, dev=0x8138) at 0.0 irq 11.
Try adding this ID to the dc driver?
Warner
To Unsubscribe: send mail
In message: [EMAIL PROTECTED]
M. Warner Losh [EMAIL PROTECTED] writes:
: In message: [EMAIL PROTECTED]
: Shizuka Kudo [EMAIL PROTECTED] writes:
: : kernel: found-vendor=0x10ec, dev=0x8138, revid=0x10
: ...
: : kernel: cardbus0: unknown card (vendor=0x10ec,
All,
Thank you for your support. The card should have been
recognized in NEWCARD. It is my fault that I thought
my Thinkpad was running NEWCARD but in fact was a
custom kernel without rl support. In addition, I did
not experience the hang that was mentioned by another
YAMAMOTO san.
--- Taku