Hello,
I think that I need your help. I'm not well versed in the ways of ACPI.
On my -current testbox, the ACPI module produces a seemingly infinate
number of error messages on console like the following:
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[3a], disabling
event
Actually, I think it happens each time I get an interrupt on my
ethernet device. At least 'ifconfig fxp0 up' starts the messages,
and 'ifconfig fxp0 down' stops them.
This is an SMP SuperMicro 370DLE (Serverworks) based machine. If an
acpidump would help to debug this, I'd be happy to provide one.
Thank you very much for your help,
Drew
OK boot -s
-\|/-\|Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Jul 12 20:14:49 EDT 2002
gallatin@big:/usr/src/sys/i386/compile/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a1000.
Preloaded elf module "/boot/kernel/acpi.bak.ko" at 0xc04a10b4.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
avail memory = 515915776 (503824K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00f5260
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <RCC RCCNILE > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
can't fetch resources for \_SB_.LN02 - AE_BAD_DATA
can't fetch resources for \_SB_.LN06 - AE_BAD_DATA
can't fetch resources for \_SB_.LN08 - AE_BAD_DATA
can't fetch resources for \_SB_.LN15 - AE_BAD_DATA
can't fetch resources for \_SB_.LNUS - AE_BAD_DATA
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
IOAPIC #1 intpin 2 -> irq 2
IOAPIC #1 intpin 6 -> irq 5
IOAPIC #1 intpin 15 -> irq 9
pci0: <PCI bus> on acpi_pcib0
atapci0: <Promise ATA66 controller> port
0xdf00-0xdf3f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem
0xfe9a0000-0xfe9bffff irq 2 at device 2.0 on pci0
ata2: at 0xdff0 on atapci0
ata3: at 0xdfa8 on atapci0
pci0: <display, VGA> at device 4.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem
0xfc900000-0xfc9fffff,0xfcafe000-0xfcafefff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:d3:0b
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xfcaff000-0xfcafffff irq 10 at device 15.2
on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
acpi_pcib1: <Host-PCI bridge> on acpi0
acpi_pcib1: we have duplicate bus number 0 - not probing bus
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 1 on motherboard
IOAPIC #1 intpin 8 -> irq 11
pci1: <PCI bus> on pcib1
pci1: <old, non-VGA display device> at device 1.0 (no driver attached)
orm0: <Option ROMs> at iomem 0xc9800-0xca7ff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pmtimer0 on isa0
Timecounters tick every 10.000 msec
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad4: 19092MB <ST320414A> [38792/16/63] at ata2-master UDMA66
acd0: CDROM <CDU5211> at ata1-master PIO4
MoSuMnPt:i nAgP rCoPoUt #f1r oLma uunfcsh:e/dd!ev
/ad4s3a
Enter full pathname of shell or RETURN for /bin/sh:
# ifconfig fxp0 up
<messages start; one per packet I think>
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[20],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[21],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[22],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[23],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[24],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[25],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[26],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[27],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[28],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[29],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[2a],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[2b],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[2c],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[2d],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[2e],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[2f],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[30],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[31],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[32],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[33],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[34],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[35],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[36],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[37],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[38],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[39],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[3a],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[3b],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[3c],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[3d],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[3e],
disabling event
ACPI-1046: *** Error: AcpiEvGpeDispatch: No handler or method for GPE[3f],
disabling event
# ifconfig fxp0 down
<events stop>
# reboot
boot() called on cpu#1
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
