Not work ATH (AR9285) after update
Hello, i'm horrible news, after update my notebook not nave wi-fi :( full update system, build and install world and kernel. # uname -a FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253562: Tue Jul 23 14:44:07 MSK 2013 root@x220.local:/usr/obj/usr/src/sys/W_BOOK amd64 # grep ATH /usr/src/sys/amd64/conf/W_BOOK options ATH_ENABLE_11N options ATH_DEBUG options ATH_DIAGAPI ath0@pci0:3:0:0:class=0x028000 card=0x1a891a3b chip=0x002b168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR9285 Wireless Network Adapter (PCI-Express)' class = network # ifconfig ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290 ether 00:25:d3:7b:94:87 nd6 options=21PERFORMNUD,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated wlan0: flags=8c43UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:25:d3:7b:94:87 inet6 fe80::225:d3ff:fe7b:9487%wlan0 prefixlen 64 scopeid 0x4 nd6 options=23PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid channel 8 (2447 MHz 11g) regdomain 33411 country RU indoor ecm authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF txpower 20 bmiss 7 scanvalid 60 protmode CTS wme burst roaming MANUAL # ifconfig wlan0 list scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS APT-SPB2b8:a3:86:4a:75:6a6 54M -92:-96 100 EP HTCAP WPA RSN WME WPS THD1 74:ea:3a:d1:37:46 10 54M -85:-96 100 EP RSN HTCAP WME Balt1 00:90:4c:c1:00:001 54M -90:-96 100 EP RSN TP-LINK_904D2A 64:70:02:90:4d:2a 11 54M -94:-96 100 EPS RSN HTCAP WME ATH WPS /var/log/messages ... Jul 23 15:34:24 x220 wpa_supplicant[669]: wlan0: CTRL-EVENT-TERMINATING Jul 23 15:34:24 x220 kernel: wlan0: Ethernet address: 00:25:d3:7b:94:87 Jul 23 15:34:24 x220 devd: Executing '/etc/pccard_ether wlan0 start' Jul 23 15:34:24 x220 wpa_supplicant[2563]: Successfully initialized wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2571]: Successfully initialized wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2571]: ctrl_iface exists and seems to be in use - cannot override it Jul 23 15:34:24 x220 wpa_supplicant[2571]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore Jul 23 15:34:24 x220 wpa_supplicant[2571]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again. Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Operation not supported Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Operation not supported Jul 23 15:34:24 x220 root: /etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:24 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:25 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:25 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:26 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! Jul 23 15:34:26 x220 kernel: ath0: ath_reset: concurrent reset! Danger! Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt 0; bailing Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt 0; bailing Jul 23 15:34:26 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:27 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: Not work ATH (AR9285) after update
.. are two copies of wpa_supplicant running? -adrian On 23 July 2013 06:09, Andrey Fesenko f0and...@gmail.com wrote: Hello, i'm horrible news, after update my notebook not nave wi-fi :( full update system, build and install world and kernel. # uname -a FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253562: Tue Jul 23 14:44:07 MSK 2013 root@x220.local:/usr/obj/usr/src/sys/W_BOOK amd64 # grep ATH /usr/src/sys/amd64/conf/W_BOOK options ATH_ENABLE_11N options ATH_DEBUG options ATH_DIAGAPI ath0@pci0:3:0:0:class=0x028000 card=0x1a891a3b chip=0x002b168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR9285 Wireless Network Adapter (PCI-Express)' class = network # ifconfig ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290 ether 00:25:d3:7b:94:87 nd6 options=21PERFORMNUD,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated wlan0: flags=8c43UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:25:d3:7b:94:87 inet6 fe80::225:d3ff:fe7b:9487%wlan0 prefixlen 64 scopeid 0x4 nd6 options=23PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid channel 8 (2447 MHz 11g) regdomain 33411 country RU indoor ecm authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF txpower 20 bmiss 7 scanvalid 60 protmode CTS wme burst roaming MANUAL # ifconfig wlan0 list scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS APT-SPB2b8:a3:86:4a:75:6a6 54M -92:-96 100 EP HTCAP WPA RSN WME WPS THD1 74:ea:3a:d1:37:46 10 54M -85:-96 100 EP RSN HTCAP WME Balt1 00:90:4c:c1:00:001 54M -90:-96 100 EP RSN TP-LINK_904D2A 64:70:02:90:4d:2a 11 54M -94:-96 100 EPS RSN HTCAP WME ATH WPS /var/log/messages ... Jul 23 15:34:24 x220 wpa_supplicant[669]: wlan0: CTRL-EVENT-TERMINATING Jul 23 15:34:24 x220 kernel: wlan0: Ethernet address: 00:25:d3:7b:94:87 Jul 23 15:34:24 x220 devd: Executing '/etc/pccard_ether wlan0 start' Jul 23 15:34:24 x220 wpa_supplicant[2563]: Successfully initialized wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2571]: Successfully initialized wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2571]: ctrl_iface exists and seems to be in use - cannot override it Jul 23 15:34:24 x220 wpa_supplicant[2571]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore Jul 23 15:34:24 x220 wpa_supplicant[2571]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again. Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Operation not supported Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Operation not supported Jul 23 15:34:24 x220 root: /etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:24 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:25 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:25 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:26 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! Jul 23 15:34:26 x220 kernel: ath0: ath_reset: concurrent reset! Danger! Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt 0; bailing Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt 0; bailing Jul 23 15:34:26 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:27 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to
Re: Not work ATH (AR9285) after update
On Tue, Jul 23, 2013 at 5:13 PM, Adrian Chadd adr...@freebsd.org wrote: .. are two copies of wpa_supplicant running? -adrian On 23 July 2013 06:09, Andrey Fesenko f0and...@gmail.com wrote: Hello, i'm horrible news, after update my notebook not nave wi-fi :( full update system, build and install world and kernel. # uname -a FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253562: Tue Jul 23 14:44:07 MSK 2013 root@x220.local:/usr/obj/usr/src/sys/W_BOOK amd64 # grep ATH /usr/src/sys/amd64/conf/W_BOOK options ATH_ENABLE_11N options ATH_DEBUG options ATH_DIAGAPI ath0@pci0:3:0:0:class=0x028000 card=0x1a891a3b chip=0x002b168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR9285 Wireless Network Adapter (PCI-Express)' class = network # ifconfig ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290 ether 00:25:d3:7b:94:87 nd6 options=21PERFORMNUD,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated wlan0: flags=8c43UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:25:d3:7b:94:87 inet6 fe80::225:d3ff:fe7b:9487%wlan0 prefixlen 64 scopeid 0x4 nd6 options=23PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid channel 8 (2447 MHz 11g) regdomain 33411 country RU indoor ecm authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF txpower 20 bmiss 7 scanvalid 60 protmode CTS wme burst roaming MANUAL # ifconfig wlan0 list scan SSID/MESH IDBSSID CHAN RATE S:N INT CAPS APT-SPB2b8:a3:86:4a:75:6a6 54M -92:-96 100 EP HTCAP WPA RSN WME WPS THD1 74:ea:3a:d1:37:46 10 54M -85:-96 100 EP RSN HTCAP WME Balt1 00:90:4c:c1:00:001 54M -90:-96 100 EP RSN TP-LINK_904D2A 64:70:02:90:4d:2a 11 54M -94:-96 100 EPS RSN HTCAP WME ATH WPS /var/log/messages ... Jul 23 15:34:24 x220 wpa_supplicant[669]: wlan0: CTRL-EVENT-TERMINATING Jul 23 15:34:24 x220 kernel: wlan0: Ethernet address: 00:25:d3:7b:94:87 Jul 23 15:34:24 x220 devd: Executing '/etc/pccard_ether wlan0 start' Jul 23 15:34:24 x220 wpa_supplicant[2563]: Successfully initialized wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2571]: Successfully initialized wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2571]: ctrl_iface exists and seems to be in use - cannot override it Jul 23 15:34:24 x220 wpa_supplicant[2571]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore Jul 23 15:34:24 x220 wpa_supplicant[2571]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again. Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Operation not supported Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Operation not supported Jul 23 15:34:24 x220 root: /etc/rc.d/wpa_supplicant: WARNING: failed to start wpa_supplicant Jul 23 15:34:24 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:24 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:25 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:25 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:26 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! Jul 23 15:34:26 x220 kernel: ath0: ath_reset: concurrent reset! Danger! Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt 0; bailing Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt 0; bailing Jul 23 15:34:26 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:27 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! Not, root@x220:~ # ps -A | grep wpa 671 - Ss 0:00.73 /usr/sbin/wpa_supplicant -s -B -i wlan0 -c /etc/wpa_suppl Start, or
Re: Not work ATH (AR9285) after update
Ok, so. On 23 July 2013 07:12, Andrey Fesenko f0and...@gmail.com wrote: i'm horrible news, after update my notebook not nave wi-fi :( full update system, build and install world and kernel. What did it used to run? Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! Your previous log indicated multiple copies of wpa_supplicant. That should be investigated. Not, root@x220:~ # ps -A | grep wpa 671 - Ss 0:00.73 /usr/sbin/wpa_supplicant -s -B -i wlan0 -c /etc/wpa_suppl Start, or restart work standart # /etc/rc.d/netif restart this scheme work fine ~year or half year. Although of course the chip AR9285 is not very stable, especially in combination with some AP. That's why I updated the support. It's much more stable now. Except if you somehow get 1 wpa_supplicant instances running. Hm... intresting boot messages ... Jul 23 17:47:06 x220 kernel: ath0: Atheros 9285 mem 0xf240-0xf240 irq 17 at device 0.0 on pci3 Jul 23 17:47:06 x220 kernel: [ath] AR9285 Main LNA config: LNA1 Jul 23 17:47:06 x220 kernel: [ath] AR9285 Alt LNA config: LNA2 Jul 23 17:47:06 x220 kernel: [ath] LNA diversity disabled, Diversity disabled Jul 23 17:47:06 x220 kernel: ath0: [HT] enabling HT modes Jul 23 17:47:06 x220 kernel: ath0: [HT] 1 stream STBC receive enabled Jul 23 17:47:06 x220 kernel: ath0: [HT] 1 RX streams; 1 TX streams Jul 23 17:47:06 x220 kernel: ath0: AR9285 mac 192.2 RF5133 phy 14.0 Jul 23 17:47:06 x220 kernel: ath0: 2GHz radio: 0x; 5GHz radio: 0x00c0 x220 - is this a thinkpad? Or what kind of laptop is it? Have you added this card in yourself? Are both antennas connected? The EEPROM settings disable diversity. Thus, the transmit path is always LNA1, the receive path is always LNA1. So, it should at least have that antenna connected. old log Jul 2 13:30:02 x220 kernel: ath0: Atheros 9285 mem 0xf240-0xf240 irq 17 at device 0.0 on pci3 Jul 2 13:30:02 x220 kernel: ath0: [HT] enabling HT modes Jul 2 13:30:02 x220 kernel: ath0: [HT] 1 stream STBC receive enabled Jul 2 13:30:02 x220 kernel: ath0: [HT] 1 RX streams; 1 TX streams Jul 2 13:30:02 x220 kernel: ath0: AR9285 mac 192.2 RF5133 phy 14.0 Jul 2 13:30:02 x220 kernel: ath0: 2GHz radio: 0x; 5GHz radio: 0x00c0 What's the svn revision on that? and old style reconnect Jul 2 14:15:33 x220 wpa_supplicant[516]: CTRL-EVENT-DISCONNECTED bssid=58:6d:8f:fa:d9:50 reason=0 Jul 2 14:15:33 x220 kernel: wlan0: link state changed to DOWN Jul 2 14:15:35 x220 wpa_supplicant[516]: Trying to associate with 58:6d:8f:fa:d9:50 (SSID='hometest' freq=2472 MHz) Jul 2 14:15:35 x220 wpa_supplicant[516]: Associated with 58:6d:8f:fa:d9:50 Jul 2 14:15:35 x220 kernel: wlan0: link state changed to UP Jul 2 14:15:35 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:15:35 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:15:35 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:15:35 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:15:35 x220 wpa_supplicant[516]: WPA: Key negotiation completed with 58:6d:8f:fa:d9:50 [PTK=CCMP GTK=CCMP] Jul 2 14:15:35 x220 wpa_supplicant[516]: CTRL-EVENT-CONNECTED - Connection to 58:6d:8f:fa:d9:50 completed (reauth) [id=0 id_str=] Jul 2 14:15:35 x220 dhclient: New IP Address (wlan0): 192.168.1.22 Jul 2 14:15:35 x220 dhclient: New Subnet Mask (wlan0): 255.255.255.0 Jul 2 14:15:35 x220 dhclient: New Broadcast Address (wlan0): 192.168.1.255 Jul 2 14:15:35 x220 dhclient: New Routers (wlan0): 192.168.1.1 Jul 2 14:19:57 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:19:57 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:20:00 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:20:00 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:22:21 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:22:21 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 15:10:13 x220 wpa_supplicant[516]: WPA: Group rekeying completed with 58:6d:8f:fa:d9:50 [GTK=CCMP] Jul 2 15:10:13 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 15:10:13 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 15:12:00 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 15:12:00 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 15:12:13 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 15:12:13 x220 kernel: ath0:
Re: Not work ATH (AR9285) after update [SOLVED]
On Tue, Jul 23, 2013 at 6:21 PM, Adrian Chadd adr...@freebsd.org wrote: Ok, so. On 23 July 2013 07:12, Andrey Fesenko f0and...@gmail.com wrote: i'm horrible news, after update my notebook not nave wi-fi :( full update system, build and install world and kernel. What did it used to run? # grep wlan0 /etc/rc.conf wlans_ath0=wlan0 ifconfig_wlan0=WPA DHCP ifconfig_wlan0_ipv6=inet6 accept_rtadv Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Operation now in progress Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish after 10 iterations Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning, recursive reset path! Your previous log indicated multiple copies of wpa_supplicant. That should be investigated. Not, root@x220:~ # ps -A | grep wpa 671 - Ss 0:00.73 /usr/sbin/wpa_supplicant -s -B -i wlan0 -c /etc/wpa_suppl Start, or restart work standart # /etc/rc.d/netif restart this scheme work fine ~year or half year. Although of course the chip AR9285 is not very stable, especially in combination with some AP. That's why I updated the support. It's much more stable now. Except if you somehow get 1 wpa_supplicant instances running. Hm... intresting boot messages ... Jul 23 17:47:06 x220 kernel: ath0: Atheros 9285 mem 0xf240-0xf240 irq 17 at device 0.0 on pci3 Jul 23 17:47:06 x220 kernel: [ath] AR9285 Main LNA config: LNA1 Jul 23 17:47:06 x220 kernel: [ath] AR9285 Alt LNA config: LNA2 Jul 23 17:47:06 x220 kernel: [ath] LNA diversity disabled, Diversity disabled Jul 23 17:47:06 x220 kernel: ath0: [HT] enabling HT modes Jul 23 17:47:06 x220 kernel: ath0: [HT] 1 stream STBC receive enabled Jul 23 17:47:06 x220 kernel: ath0: [HT] 1 RX streams; 1 TX streams Jul 23 17:47:06 x220 kernel: ath0: AR9285 mac 192.2 RF5133 phy 14.0 Jul 23 17:47:06 x220 kernel: ath0: 2GHz radio: 0x; 5GHz radio: 0x00c0 x220 - is this a thinkpad? Or what kind of laptop is it? Have you added this card in yourself? Are both antennas connected? The EEPROM settings disable diversity. Thus, the transmit path is always LNA1, the receive path is always LNA1. So, it should at least have that antenna connected. Yes it's thinkpad X220 :) :( hacked BIOS for remove wite list, yes antenna connected card installed near yea ago and all this time working for startup on the rc.conf old log Jul 2 13:30:02 x220 kernel: ath0: Atheros 9285 mem 0xf240-0xf240 irq 17 at device 0.0 on pci3 Jul 2 13:30:02 x220 kernel: ath0: [HT] enabling HT modes Jul 2 13:30:02 x220 kernel: ath0: [HT] 1 stream STBC receive enabled Jul 2 13:30:02 x220 kernel: ath0: [HT] 1 RX streams; 1 TX streams Jul 2 13:30:02 x220 kernel: ath0: AR9285 mac 192.2 RF5133 phy 14.0 Jul 2 13:30:02 x220 kernel: ath0: 2GHz radio: 0x; 5GHz radio: 0x00c0 What's the svn revision on that? FreeBSD 10.0-CURRENT #0 r249991 and old style reconnect Jul 2 14:15:33 x220 wpa_supplicant[516]: CTRL-EVENT-DISCONNECTED bssid=58:6d:8f:fa:d9:50 reason=0 Jul 2 14:15:33 x220 kernel: wlan0: link state changed to DOWN Jul 2 14:15:35 x220 wpa_supplicant[516]: Trying to associate with 58:6d:8f:fa:d9:50 (SSID='hometest' freq=2472 MHz) Jul 2 14:15:35 x220 wpa_supplicant[516]: Associated with 58:6d:8f:fa:d9:50 Jul 2 14:15:35 x220 kernel: wlan0: link state changed to UP Jul 2 14:15:35 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:15:35 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:15:35 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:15:35 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:15:35 x220 wpa_supplicant[516]: WPA: Key negotiation completed with 58:6d:8f:fa:d9:50 [PTK=CCMP GTK=CCMP] Jul 2 14:15:35 x220 wpa_supplicant[516]: CTRL-EVENT-CONNECTED - Connection to 58:6d:8f:fa:d9:50 completed (reauth) [id=0 id_str=] Jul 2 14:15:35 x220 dhclient: New IP Address (wlan0): 192.168.1.22 Jul 2 14:15:35 x220 dhclient: New Subnet Mask (wlan0): 255.255.255.0 Jul 2 14:15:35 x220 dhclient: New Broadcast Address (wlan0): 192.168.1.255 Jul 2 14:15:35 x220 dhclient: New Routers (wlan0): 192.168.1.1 Jul 2 14:19:57 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:19:57 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:20:00 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:20:00 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 14:22:21 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27 ts_finaltsi=0 Jul 2 14:22:21 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1 ts_status 0x0 Jul 2 15:10:13 x220 wpa_supplicant[516]: WPA: Group rekeying completed with 58:6d:8f:fa:d9:50 [GTK=CCMP] Jul 2 15:10:13 x220 kernel: ath0: ath_rate_tx_complete:
